Used Exner H4Sp 150 (Uvv §20) for sale (36,472)

Condition: used, Year of construction: 1991, pressure 150 t distance between columns 300 mm stroke 180 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 570x180 / 300x410 mm table height over floor 875 mm side window 180 mm ram surface 180 mm speed down 250 mm/s speed up 160 mm/s working speed 6 - 12 mm/s oil volume 250 l power requirement 11,0 kW weight 2,4 t dimensions (WxDxH) 1,3 x 1,3 x 2,4 m year of manufacture 1972 - overhaul 1991 permitted for manual loading according to the German Safety Regulations (UVV §20) with oil-hydraulic drive No foundation pit necessary as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request Laedpjvuuiwefx Apyja

Condition: ready for operation (used), Year of construction: 1978, machine/vehicle number: 3073, functionality: fully functional, pressing force: 200 t, stroke length: 180 mm, Machine recovered from the insolvency of an automotive supplier - machines are still in operation! Rebuilt in 2008! TECHNICAL DETAILS Press force: 200 t Laedpfewhdm Dex Apyea Max. stroke length: 180 mm Control: Two-hand operation Further information according to the manufacturer - without guarantee Front column clearance: 420 mm Side column clearance: 220 mm Table width: 830 mm Table depth: 530 mm Machine dimensions: 1.3 x 1.5 x 2.7 m

Condition: used, Year of construction: 1971, pressure 200 t passage width NA mm stroke 180 mm table length 690 mm table width 530 mm distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t Lsdpfx Aet Hw Dwspysaa dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel Lajdpoyz Dtdefx Apyja - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: used, Year of construction: 1992, Pressure 200 t distance between columns 1910 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1900 x 1150 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 300 mm die cushion area 1500 x 950 mm table height over floor 800 mm side window 1000 mm ram surface 1900 x 1100 mm return capacity 36 t speed down 400 mm/s speed up 170 mm/s working speed 30,5 mm/s oil volume 1500 l height over floor 4,85 m height beneath floor 2,6 m power requirement 45,0 kW weight 38,0 t dimensions (WxDxH) 3,05 x 2,8 x 5,55 m year of manufacture 1975 - modernization 1992 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, ram interlocking Lsdpfxevuui Rs Apyeaa can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 2000, pressure 25 t stroke 150 mm throat 420 mm dayligth 450 mm table surface area 700 x 820 mm table height over floor 850 mm Lajdpfovut N Nox Apyoa ram surface 600 x 600 mm feed down 370 mm/s feed up 370 mm/s working feed 18 - 33 mm/s oil volume 300 l power requirement 5,5 kW Weight 5,8 t dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1970, pressure 40 t stroke 150 mm serial number 100091 Ljdpsvxltbjfx Apyjaa 2 Druck & Hub verstellbar pressure 25 t weight je 1,5 t safety light frame ja bei beiden

Condition: used, Manufacturer: EXNER Laedpfx Apsxbf Ndjyea Type: EX 20 Maximum pressing force: 20 t Table size: 480 x 350 mm Maximum tool height: 230 mm

Condition: good (used), Year of construction: 1970, pressure 80 t passage width 350 mm stroke 600 mm table dimension - longitudinal 400 mm Lajdpfjvwgqrox Apyea dimensions of the machine ca. 1400 x 1050 x 2350 m

Condition: used, Year of construction: 1976, pressure 20 t throat 185 mm stroke 100 mm table surface area 380 x 350 mm dayligth 250 mm table height over floor 840 mm total power requirement 4 kW Laedpotqqwusfx Apyja weight of the machine ca. 1,3 t

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 2000 mm Laedpfx Apsvut Tnjyja stroke 600 mm Distance table/ram, stroke up 1000 mm table surface area 1700 x 1300 mm table height over floor 800 mm die cushion pressure in table 100 t die cushion stroke in table 180 mm Die cushion area in table 1650 x 700 mm side window 1000 mm ram surface 1700 x 1400 mm weight 31,1 t dimensions (WxDxH) 3,3 x 1,9 x 4,85 m Height above floor 4,55 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 31600 € 603.56 € 2050 mm 6 mm 6 mm 4 mm 4 mm 3 mm 150 mm 150 mm 130 mm 1,5 / 6 m/min 4 kW 4250 mm 960 mm 1100 mm 2800 kg 4 rolls Laedpfx Aeyb Szbepysa Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: used, TECHNICAL DETAILS - Max. temperature : 950 [°C] - Max. inlet height : 10 [mm] - Heating distance : 1600 [mm] - Cooling length : 2600 [mm] Ledpfx Apeug U Tzjyjaa - Conveyor belt speed : 0.4 - 3.2 [m/min] - Conveyor belt width : 150 [mm] - Nominal voltage : 400 [V] EQUIPMENT - External cooling unit

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Gardner Denver, rotary vane vacuum pump type VC 150 (20) -Flow rate: 150 m³/h Laedpfel U E Twjx Apyoa -Drive: 3 kW Overall dimensions: 710/400/H290 mm -Weight: 92 kg

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance Lasdpfx Apsv Dxm Seyja - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition

Condition: as good as new (ex-display), Year of construction: 2025, PTC CTR-C Cold Water Trailer – Similar to but not ROM, Rioned, Karo, etc. Laedpfx Apefdvkrjyja - Single-axle trailer with hot-dip galvanized frame, support leg with wheel, parking brake, automatic reverse gear, stabilizer legs, rear lights and reflectors, towing eye for 50 mm coupling, 13" tires, and ABS. The following cold water models are available: CTR-C 43/180 | 43 l/min at 180 bar | Petrol engine: Honda GX690 17.7 kW CTR-C 55/160 | 55 l/min at 160 bar | Petrol engine: Honda GX690 17.7 kW CTR-C 60/150 | 60 l/min at 150 bar | Diesel engine: Kohler KDW 1003 19 kW CTR-C 20/350 | 20 l/min at 350 bar | Diesel engine: Kohler KDW 1003 19 kW - Dimensions: 3,045 x 1,390 x 1,190 mm - Unladen weight: approx. 350 kg - High-pressure pump: Comet TW Premium with integrated gearbox - HP hose reel: manual with max. 60 m 1/2" hose (included). CTR-C 55/160 model optionally available with electric HP hose reel. - Water supply reel: manual with 35 m 3/4" hose - Water tank: 400 l - Options such as radio remote control, booster pump, warning light, work light, aluminum hose cover, and accessories available on request

Condition: used, Temperature Controller, Temperature Sensor, Temperature Setting, Temperature Converter, Temperature Limiter, Electronic Temperature Controller, Temperature Switch, Thermostat, Sensor, -Manufacturer: Trafag, thermostat temperature switch unused original packaging -Type: 471 2331 342 27 8319 0065 90 -Temperature range: 20 to 150 °C -Cable length: 3000mm -Number: 2 thermostats available -Price per piece -Dimensions package: 245/130/H80 mm Lasdpfolc Uiisx Apyja -Weight: 1.1 kg/pc.

Condition: used, Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners, end clamps, PV roof hooks -Manufacturer: Parco, Solar fastener roof hook adjustable 20 pieces/box -Type: Zinni Flex 150 x 60 x 5 -Article No.: 574DHVS Ljdpfetpyq Hex Apyoaa -Material: stainless steel 1.4016 -Quantity: 27 boxes available -Price: per box -Dimensions box: 350/230/H235 mm -Weight: 17.8 kg

Condition: new, Year of construction: 2026, MBSM 150-20 For sanding surfaces, edges and rounding off Powerful motors with vibration-free running to achieve the best sanding results Working height adjustable due to infinitely variable inclination of the sanding unit Workpiece support angle adjustable Continuous flat sanding surface enables sanding of long workpieces as well One suction nozzle each at the spark box and at the rear belt roller Ledpfx Ashk Df Dspysaa Protective disc can be folded away Quick clamping system for changing the abrasive belt in seconds Simple adjustment of the belt run via adjusting screw Motor with brake and circuit breaker Dimensions and weights Length approx. 527 mm width/depth approx. 995 mm height approx. 1025 mm Weight approx. 114 kg Suction Nominal width of external suction nozzle 60 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idling without extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Sanding belt length 2000 mm Sanding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: ready for operation (used), Promess KA-EMF20/150 servo press SN: 1507867 - 20 kN / 1.0 mV/V, used, good condition, 100% functional, scope of delivery as per photos Lajdpfxet Izals Apyja

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Laedpsx Eg T Eefx Apysa

Condition: used, In this offer you purchase a used slitter rewinder ‘Neolt Electro Trim 150’ Object of sale: 1 x Neolt Electro Trim 150 with the following equipment: incl. underframe 150cm roll width possible electric from 2021 Condition: Laedswln I Topfx Apyja This offer is a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Laodpeyzc Ruofx Apyja

Condition: used, Year of construction: 1987, machine/vehicle number: 10064, functionality: fully functional, operating hours: 90,041 h, input voltage: 380 V, type of input current: three-phase, pressing force: 200 t, stroke length: 300 mm, table width: 800 mm, table length: 1,290 mm, table height: 1,000 mm, ram plate width: 800 mm, ram plate length: 1,300 mm, oil tank capacity: 1,300 l, total length: 2,330 mm, total width: 1,600 mm, total height: 4,150 mm, overall weight: 21,000 kg, control cabinet height: 2,070 mm, control cabinet length: 1,500 mm, control cabinet width: 400 mm, DGUV certified until: 06/2026, die cushion stroke: 70 mm, distance between side stands: 420 mm, installation height: 600 mm, Equipment: safety light barrier, 1x tool safety input Two-hand control panel with emergency stop 8x hydraulic clamps Electrically adjustable depth stop Cut stroke damping Ejector - draw cushion for ram and press table Lajdpoyvgrhofx Apyoa Electronic stroke and pressure measurement system Hydraulic main drive pump completely overhauled with a new drive motor

Condition: refurbished (used), Year of construction: 1996, machine/vehicle number: 2269, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 80 t, stroke length: 180 mm, operating speed: 300 mm/s, reverse speed: 180 mm/s, table width: 400 mm, table length: 400 mm, table height: 900 mm, distance table to ram: 300 mm, oil tank capacity: 200 l, total length: 1,700 mm, total width: 1,500 mm, total height: 2,700 mm, overall weight: 2,600 kg, installation height: 300 mm, pressing speed: 15 mm/s, Equipment: documentation/manual, safety light barrier, The press was retrofitted in 2010 in accordance with the latest safety regulations. Lsdjxyx Abjpfx Apysaa