Used Faccin Hcu 1250X3,0 for sale (67)

Year of construction: 1986, condition: ready for operation (used), Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024. Hodeq A Un Sjpfx Ah Usfn

Condition: excellent (used), Year of construction: 1998, control type: CNC control, controller model: SIEMENS TOUCH, number of rollers: 3, overall weight: 15,000 kg, total length: 2,600 mm, total width: 2,200 mm, total height: 2,300 mm, Profile bending machine FACCIN - RCMI 180 MACH-ID 9828 Make: FACCIN Type: RCMI 180 Control: SIEMENS TOUCH YOP: 1998 Power 30 kw Hydraulic side supports 3 roll driven  Touchscreen SIEMENS Panel with S7 SPS  Laser measuring device for Radius  Set Universal rolls hardned Set Tool points  Horizontal and vertical:Horizontal Shaft Ø: 190mm Number of rolls: 3 Stroke X-Axis: 500mm Resistance moment: 360CM³ Working speed: 2000 - 5000mm/min. Length: 2600mm Width: 2200mm Hodpfoz Iwy Sex Ah Usfn Height: 2300mm Weight: 15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulic two-roller bending machine Guaranteed capacities: Sheet thickness Bending with material 260 N/mm² Yield point: 2 mm Sheet thickness bending with material AISI 304-316 stainless steel: 1.5 mm Cycle time per part: 15 seconds Technical specifications: Working length: 1000 mm Installed power: 5.5 kW Hfodpfx Ahjc S N Ris Ujn Rolling speed: 7 m/min immediately available from the factory!

Year of construction: 2006, condition: ready for operation (used), overall weight: 11,500 kg, total width: 1,950 mm, total height: 1,650 mm, product length (max.): 4,200 mm, Roll bending machine manufactured in 2006. This FACCIN 4HEL 2134 features a maximum plate width of 2,100 mm and a maximum plate thickness of 28 mm. It is equipped with linear guides and has a top roll diameter of 350 mm. If you are looking to get high-quality rolling capabilities, consider the FACCIN 4HEL 2134 machine we have for sale. Contact us for further details. • Geometry: Linear guides • Max. plate width: 2,100 mm • Max. plate thickness: 28 mm • Top roll diameter: 350 mm • Pinching roll diameter: 330 mm • Side roll diameter: 240 mm • Main motor power: 18.5 kW • Rolling speed: 7 m/min • Feature: Visualized/digital roll position indicators • Rolling performance: • Full width: up to 25 mm rolling / 20 mm pre-bending at Ø1,700 mm, 260 N/mm² • Full width: 20 mm / 16 mm at Ø400 mm, 260 N/mm² Hfjdozylh Djpfx Ah Ujn • Full width: 20 mm / 16 mm at Ø1,700 mm, 360 N/mm² • Full width: 18 mm / 14 mm at Ø400 mm, 355 N/mm² • Half width: up to 30 mm rolling / 25 mm pre-bending at Ø1,700 mm, 260 N/mm²

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. Hfedpfxezguumj Ah Ujn A live demonstration under power is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2006, Technical specifications: Working width: 2100 mm Bending capacity: 28.0 mm Hfjdpex Dtt Aofx Ah Ujn Springback: 22.0 mm CNC control Diameter of upper roller: 350 mm Diameter of middle roller: 330 mm Diameter of side rollers: 240 mm Hardened rollers Conical bending unit by inclining the two side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (length x width x height): approx. 3600 x 1500 x 1500 mm Weight: approx. 14.5 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 21977-1964, Offer 26165 Technical Data - Two driven rollers, each hydraulically adjustable - For edging and conical rolling - Operation via a separate control panel, with digital actual value display - and manual operation Hsdpfx Ahezf Hkdj Ujfn - Max. working width 1300 mm - Max. sheet thickness at 400 N/mm² without edging - at bending diameter 370 mm, inside 30 mm - with edging at bending diameter 370 mm, inside 25 mm - without edging at bending diameter 380 mm, inside and - width of 370 mm 45 mm - Upper roller diameter each 300 mm - Side roller diameter each 310 mm - Working speed 4.5 m/min - Drive 400 V / 30 kW - Space requirement W 5800 x H 1900 x D 2200 mm - Weight 8500 kg

Condition: used, Year of construction: 2019, operating hours: 4,240 h, functionality: fully functional, Used Cone Crusher HCU 7/160 After Complete Refurbishment – Available Immediately We offer for sale a fully refurbished cone crusher HCU 7/160 after complete overhaul and replacement of internal wear parts with new ones. The machine is in very good technical condition and ready for immediate operation. Price: EUR 89,900 – complete crushing unit + EUR 16,890 – new hot-dip galvanized supporting steel structure with stairs, walkways, and operator platform Scope of Supply 01 – Complete Crushing Unit with Cone Crusher HCU 7/35-160 Includes: Hydraulic cone crusher HCU 7/35-160 Oil station for crusher setting adjustment and bearing lubrication Common frame for crusher and drive Feed hopper 4 pcs rubber springs (silent blocks) Positive pressure dust protection system for crusher and oil tank (filter + blower) 90 kW drive, 400 V, 50 Hz Automatic control system with visualization Automatic grease lubrication Power control cabinet, Y/D motor starting Refurbishment and Technical Condition Complete general overhaul of the machine Hodsy Nxnrspfx Ah Usfn New internal wear parts Refurbished electrical control cabinet Ready for immediate operation Robust design suitable for quarries, recycling, and mining operations Optional – New Steel Structure Available completely new: Hot-dip galvanized supporting steel structure Stairs Service walkways Operator platform Structure price: EUR 16,890 Please contact us for more information or a commercial offer.

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Middle roller diameter: 320 mm Side roller diameter: 240 mm Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Hfsdev Htnijpfx Ah Ujn Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: ready for operation (used), Faccin profile bending machine Hfjdpfxsy Abz Us Ah Uon

Condition: used, Year of construction: 2018, functionality: fully functional, HCU 7/160 Cone Crusher Year of manufacture: 2018 Crusher inlet [mm]: 160 CSS [mm]: 12-32 mm Motor [kW]: 90 Hydraulically adjustable gap The crusher produces cubic material and is suitable for the hardest materials. Crusher with oil tank and 90 kW motor Crusher with control cabinet and PC control Galvanized support structure included Hfsdpfx Ajzl N Ulsh Uen Machine is fully operational

Year of construction: 2018, condition: good (used), Make: FACCIN Type: 4HEL 3590 Control: Siemens TOUCH Year: 2018 Specifications Metric US Standard Rolling width 3500 mm Rolling thickness 3x toproll Ø 80 mm Rolling thickness 5x toproll Ø 110 mm Rolling thickness prebending 90 mm Top Roll Ø 900 mm Top Roll Ø 900 mm Bottom Roll Ø 800 mm Side roll Ø 600 mm Number of rolls 4 Rolling speed 0-6 Adjustiment lower roll 0-200 mm/min. Adjustment side rolls 0-400 mm/min. Top support yes Side supports yes Number of driven rolls 2 Power 90+75+9 kW Dimensions (Estimate) Length 4430 mm Width 8800 mm Height Hfedpfekvm Nfox Ah Usn 11000 mm Weight 178000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, roller (bottom) diameter: 160 mm, roller (top) diameter: 175 mm, side roll diameter: 135 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness (max.): 7 mm, power: 4.4 kW (5.98 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: centralized greasing system, cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Electronically Controlled, Electrohydraulic Four-Roller Plate Bending Machine Manufacturer: FACCIN, Model 4 EDL 1617 Technical Specifications: Number of rollers: Four Geometry of side rollers: Linear guides Working width: 1500 mm Top roller diameter: 175 mm Bottom roller diameter: 160 mm Side roller diameter: 135 mm Pressing force against top roller: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full working width): 7 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 875 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 5 mm From pipe diameter: 225 mm Standard Equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for roller rotation Extra heavy-duty, double-support swing bearing Electronic Parallelism System EPS Hardened rollers for high wear resistance Hedpfx Ahjwwt Ddo Ujfn All rollers ground after heat treatment Siemens PLC control system Electric drive for top roller for increased efficiency Safety trip wire with emergency stop and CE certification Centralized lubrication Cone bending device Optional Equipment Included: CNC control PGS-ABSOLUTE

Condition: like new (used), Year of construction: 2020, functionality: fully functional, input voltage: 380 V, total length: 8,000 mm, total width: 2,940 mm, total height: 1,700 mm, compressed air connection: 7 bar, type of input current: three-phase, overall weight: 4,500 kg, input frequency: 50 Hz, Printing area: 2,000 x 3,000 mm - Minimum positioning accuracy: ±0.1 mm - Minimum printing size: 500 x 700 mm - Maximum size of screen printing frame: 2,500 x 3,650 mm - Glass thickness for printing: 2.5 - 19 mm - Manufacturing accuracy: ± 0.05 mm - Fine adjustment range for screen printing frame positioning: ± 15 mm - Electrical parameters: 10 kW/400V/50Hz - Compressed air pressure: 7 bar - Overall dimensions LxWxH (mm): 8,000 x 2,940 x 1,700 mm - Weight: 4,500 kg Main features: Hodpfx Aoz R I Tqeh Ujfn - Manual loading and unloading of the glass sheet for printing is done on the loading/unloading conveyor. - Loading the glass sheet and positioning it for printing is done from the front by the operator. - Lowering the screen and moving the squeegee (forward and backward movement) is done automatically. - The machine is equipped with a blower to create an air cushion (necessary for easy movement of the glass parts on the work surface) and a vacuum system (necessary for fixing the parts during printing). - The machine is equipped with stoppers that define the edges of the work surface on two sides (allowing for accurate placement of the part to be printed). - The upper part of the machine folds down from the rear hinges, facilitating access for the operator to load and unload the glass part. - Mitsubishi PLC with HCU (Human Computer Interface) that provides a user-friendly interface and intuitive controls.

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: Hedet Akt Rspfx Ah Ujfn for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 2000 mm 11 mm 11 mm 7 mm 8 mm 6.4 mm 225 mm 215 mm 165 mm 8 m/min 3950 mm 1200 mm 1200 mm 4450 kg Hfodpfx Ahsypbp Rs Usn Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guide for the movement of the lower rolls Ultra wide rolls blocks "MCS" bearing system for the lower rolls (4 large bearings on each shaft) Central lubrication system Pressure manometer for constant pinch roll control Extra torque and special braking system Safety cord with emergency stop Equipped according to "CE" regulations OPTION: CNC control Siemens PSG-Absolute with 15" touch screen (automatic calculation of the process for simple and complex shapes)

Condition: excellent (used), Year of construction: 2008, The ATOM FlashCut 3010 plotter is an advanced digital knife cutting machine designed for precise and fast cutting of a wide range of materials, such as leather, textiles, foams, and plastics. It is particularly valued in the footwear, leather goods, and gasket/component manufacturing industries. ⸻ Hfsdpfxjy D E R Ne Ah Uon 📐 Technical specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ ⚙️ Main features • Versatility: The plotter enables cutting of various materials, from soft leathers to hard plastics. • Ergonomics: Compact and ergonomic design ensures easy operation and space-saving installation in production facilities. • Vacuum system: Dual-zone vacuum system ensures stable material hold-down during cutting. • Cutting head: Supports multiple tools, including oscillating knives and creasing tools, providing greater production flexibility. ⸻ 🏭 Industrial applications The ATOM FlashCut EASY 3010 plotter is used for: • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries • Packaging and advertising material production ⸻ 🛠️ Additional information The 3010 model is especially recommended for companies seeking a solution that combines high cutting precision with production efficiency. Thanks to its ability to process large-format materials and support for various cutting tools, this plotter is suitable for both serial production and custom projects.

Condition: excellent (used), Year of construction: 2015, working width: 3,000 mm, total height: 1,000 mm, cutting height (max.): 10 mm, The ATOM FlashCut EASY 888 L30 plotter is an advanced digital knife cutting machine designed for precise and rapid cutting of a wide range of materials, including leather, textiles, foams, and plastics. It is especially valued in the footwear, leather goods, and technical gasket/component manufacturing industries. ⸻ 📐 Technical Specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ ⚙️ Key Features • Versatility: The plotter enables cutting of various materials, from soft leathers to rigid plastics. • Ergonomics: Its compact and ergonomic design ensures ease of operation and space savings in the production facility. • Vacuum system: The dual-zone vacuum system ensures stable material hold during the cutting process. • Cutting head: Supports various tools, including oscillating knives and crease tools, enhancing production flexibility. ⸻ 🏭 Industrial Applications The ATOM FlashCut EASY 888 L30 plotter is used in: • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries Hjdpfsy D Sa Djx Ah Uofn • Packaging and advertising materials production ⸻ 🛠️ Additional Information The L30 model is particularly recommended for companies seeking a solution that combines high cutting precision with production efficiency. With the ability to process large material formats and support multiple cutting tools, this plotter is suitable for both serial manufacturing and individual project tasks.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2008, total length: 14,020 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 55 / R22.5, wheelbase: 9,230 mm, color: green, Year of construction: 2008, Axle configuration Tyre size: 385 / 55 / R22.5 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 5.900 kg Carrying capacity: 35.100 kg GVW: 41.000 kg Functional Make of bodywork: Krone Box Liner History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Hfodoz Rm I Sjpfx Ah Uen Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, Year of construction: 2026, 40-foot High Cube container / As good as new! ----* Year of manufacture: 2026 * As good as new, used only once * Tare weight: approx. 3,700 kg * Gross weight: 32,500 kg * Payload: 28,800 kg * Good condition. Used only once * Price: 2,900 Euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp Hsdpfxez N Nzlo Ah Ujfn ?All information is provided without guarantee and subject to errors and prior sale.?

Condition: like new (used), functionality: fully functional, Year of construction: 2016, operating hours: 10 h, Includes: Special iron turning tool ATRC 18 Special scroll bending tool ATAR 305 Hfedot Akxaepfx Ah Uen Spiral bending device ATSC Demonstration machine, no 10h worked! TECHNICAL DATA Shaft diameter mm. 30 Roller diameter mm. 128 Roller revolutions per minute rpm. 8.5 - 17 Drive motor Kw. 0.75 Main switch with release coil and built-in emergency (CP30 - CP30 R) - Reversing gear and double speed switch are mounted on a separate console (CP30 - CP30 R) - Foot switch Foot switch rotation control L/R with built-in emergency - (CP 30 PR) - Two-speed selector (CP 30 PR) - Mechanical regulation of the upper roller Mechanical regulation of the upper roller with position reading on display - Two traction rollers with ribbed surface Internal machine body made of steel - Steel shafts steel shafts, hardened and ground - Gear wheels made of special special steel with ground teeth - Rollers made of special steel with a hardness of 59/60 HRC - Outer cover in ABS - Working position horizontal (CP 30) Horizontal working position (CP 30) - Horizontal and vertical working position vertical (CP 30 R - CP 30 PR) Weight: CP 30 PR 240 kg. External dimensions mm: CP30 PR Base 680 x 800 - Height 825 ACCESSORIES Straightening rollers with two positions - Universal rollers ( standard ) - Operating key Operating key - Operating instructions

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3163 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Hjdpfx Aoiivfqeh Uofn Geometry of the side rollers: planetary guide Working length: 3000 mm Top roll diameter: 630 mm Lower roll diameter: 570 mm Side rolls diameter: 500 mm Guaranteed installed power: 72 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 58,000 kg Length: 6,800mm Width: 3,600mm Height: 3,550mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 70 mm Bending performance (full working width) 60 mm from pipe diameter 3150 mm Rolling capacity (full working width) 55 mm Bending capacity (full working width) 50 mm from pipe diameter 820 mm Standard equipment: Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3135 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 350 mm Lower roll diameter: 330 mm Side rolls diameter: 250 mm Guaranteed installed power: 14.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 13,000 kg Length: 5,700mm Width: 1,800mm Height: 2,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 20 mm Bending performance (full working width) 15 mm from pipe diameter 1750 mm Rolling capacity (full working width) 14mm Hfjdpoiivc Djfx Ah Usn Bending capacity (full working width) 12mm from pipe diameter 455 mm Standard equipment: planetary movement of the side rollers Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP S54 Four roll bending machine Electronically controlled, electric drive, four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 300 mm lower roll diameter: 280 mm Side rolls diameter: 200 mm Guaranteed installed power: 10.8 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 10,000 kg Length: 5,500mm Width: 1,400mm Hsdpfx Asiivgrjh Ujfn Height: 1,600mm Guaranteed services: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 18 mm Bending performance (full working width) 12 mm from pipe diameter 1500 mm Rolling capacity (full working width) 12 mm Bending capacity (full working width) 10 mm from pipe diameter 450 mm Standard equipment: Electrical drive of the top roll Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rollers for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN HAV 3162 variable three-rolls bending machine Electronically controlled, hydraulic three-rolls bending machine Technical specifications: Number of Rolls: Three Geometry of the side rolls: variable Working length: 3050 mm Top roll diameter: 620 mm Side rolls diameter: 550 mm Pressure force against the top roll: 630 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 55 kW (75 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Hedeiivgyspfx Ah Ujfn Length: 7,600mm Width: 3,700mm Height: 3,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 75 mm Bending performance (full working width) 48 mm from a pipe diameter of 3,100 mm Rolling capacity (full working width) 55 mm Bending performance (full working width) 40 mm from pipe diameter 805 mm Standard equipment: variable geometry with linear guides for rolls movement Extra long release arm for increased frame stability Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hitech hydraulic and electric package Simultaneous rotation and rolls movement Safety trip wire with emergency stop and CE certification central lubrication Water cooling for the hydraulics cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP