Four rolls bending roll 3000 x 20 mm

FACCIN 4HEP 3135

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Ledpot Akt Refx Ag Aeaf Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, DAVI_MCB 3060 WT 4-roll plate bending machine CNC _ 3000x65 MM - Year of make 2007 Capacity plate width 3100 mm Plate thickness 65 mm Prebend 55 mm TOP ROLL 600 MM Lodpfx Ajy D Npijg Ajaf LOWER ROLL 550 MM Configuration installed: • Surface hardening of the four rolls • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller DAVI GENIUS semiautomatic and fully automatic programmable. with digital readout of the 4rollers for use in manual operation, • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service Voltage electric 3phase Vac 380/50 power Kw 75 nr.1 top support hydraulic operated , shell ID max 5 mtrs - CNC programmable nr.1 side support hydraulic on the left nr.1 side support hydraulic on the right, finger pusher to swing the sheet plate forming cones rolling.

Condition: new, Year of construction: 2026, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, empty load weight: 4,500 kg, - 4 rolls - Capacity: 2070 x 10 mm - Bending capacity: 2070 x 8 mm - Hardened rolls - Top roll diameter: 220 mm - Bottom roll diameter: 220 mm - Side roll diameter: 180 mm - Hydraulic - Digital display for left roll movement - Digital display for central lower roll movement - Digital display for right roll movement - Hydraulic up and down movement system with intermediate and central roll - Hydraulic indicator for easy roll positioning - Hydraulic up and down movement system with intermediate and central roll - Top roll hydraulically swing-out - Steel construction ST-52 Lajdjr H Df Ispfx Ag Ajf - Hydraulic drop-end for easy roll positioning - Hydraulic up and down movement system with central and side rolls - Hydraulic balancing system - Overvoltage protection - Documentation - 400V

Condition: new, table length 1220 mm table width 760 mm Laedpfsxqrhlox Ag Aef table height 910 mm weight 226 kg

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 31,411 h, TRUMPF Trumatic 3000 K03 Punch-Laser Combination Machine The punch-laser combination machine enables the flexibility of laser cutting to be integrated with the advantages of punching. The combination of these two technologies opens up a wide range of new possibilities, allowing the manufacturing of even the most complex sheet metal parts. Technical Specifications: - Punching force: 165 kN - Maximum sheet size: (X, Y) 2500 mm x 1250 mm - Max sheet thickness: 3 mm Lodpfx Ajycuypeg Ajaf - Maximum tool diameter: 76.2 mm - Maximum forming height: 25 mm - Maximum bending length: 55 mm - Chipless thread forming: M2.5 – M8 - Laser power: 2000 W - Number of tool stations: 18 - Tool change time (per tool): 3.9 s - Tool change time (MultiTool): 2.2 s - Positioning accuracy: ±0.1 mm - Repeatability: ±0.03 mm For optimal surface quality of sheet metal parts, the machine is equipped with a brush table and rollers surrounding the forming tools. The MultiTool stations can hold up to 180 different forming tools. Thanks to reduced production times and lower energy consumption, this punch-laser combination system offers a lower cost per unit compared to flatbed laser cutting machines, ensuring higher economic efficiency. This equipment is perfectly suited for efficient, high-volume production of complex sheet metal components. The integrated laser cutting head enables the creation of intricate shapes, delivers high-quality cut edges, and can be used when a specific profile punching tool is unavailable.

Condition: used, Year of construction: 1996, Technical details: pressure: 300 t chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, - program sequence via both presse(synchronized) and single available Optional are tools available! Copy of documentation available i.D. * Lasdpju Ib Drefx Ag Aef

Condition: new, Year of construction: 2025, load capacity: 20,000 kg, 20-ton container rotating device, roller stand, complete set 380 V, speed continuously adjustable from 200 to 1000 mm/min. Lajdjifgu Uopfx Ag Aef for diameters from 500 mm to 4000 mm roller diameter 300 mm x 140 mm temperature resistance of the support rollers: 100°C synchronous dual drive AC motor, 380 V, 750 W with hand and foot remote control, complete set

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Width:1900mm Ljdpfx Agoycu E Ee Asaf Height:2200mm Weight:2900kg

Condition: new, Year of construction: 2023, Welding turntable, container rotating device, 6000 kg load capacity Digital display with foot-operated remote control Ljdpfx Agjk Adl Hj Asaf Diameter from 180 mm to 3500 mm Drive roller diameter 300 mm Dimensions: Length: 1900 mm x Width 470 mm x Height 390 mm Speed, continuously variable: 200 - 1800 mm/min.

Condition: as good as new (ex-display), Year of construction: 2023, Container rotating device, 10-ton lifting capacity Speed: continuously adjustable Lasdpfx Asd Nmx Teg Asf Hand and foot remote control Diameter: 320mm to 2800mm Roller diameter: 300mm Speed: 6 - 60 m/h Power: 2 x 0.55 kW