Used Faymonville Max Trailer Max100 Semi-Tieflader Planenaufbau for sale (39,946)

Condition: new, maximum load weight: 40,320 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Below is an excerpt of the features. Complete equipment list available upon request. GOOSENECK Gooseneck with a rear slope of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick. - 2-inch kingpin - Yellow-red air couplings on the galvanized connection bar at the front. - 4 wheel chocks with holder on the front wall (± 5 kg). LOADING AREA 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying at the front in the loading area (LC 10,000 daN). Hardwood decking approximately 48 mm thick, with diamond plate decking over the axles. - On the gooseneck and at the rear, left and right, one holder each for the warning signs, including a socket. - A galvanized steel front wall. - 3 height-adjustable wooden planks. - Galvanized folding supports under the slope of the loading area. - A holder for a rotating beacon at the rear of the semi-trailer. - Height-adjustable tarpaulin superstructure, approximately 3,960 mm. - Galvanized front wall with a tensioning mechanism for the sliding curtains. - Height-adjustable by approximately 400 mm. - Roof from the EDSCHA brand, which can be moved forward on aluminum roof rail profiles. - 3 pairs of sliding rails in the loading area. - The superstructure can be hydraulically widened at the rear to the left and right by approximately 750 mm (for loading and unloading). - Sliding cover with a pivoting portal beam. - Sliding tarpaulin with approximately 700 mm of reserve in length, with tension straps at intervals of approximately 600 mm. - Height of the top edge of the superstructure approximately 3,960 mm (loaded). - Driving with the sliding cover open is not permitted and will damage the tarpaulin. - Attachment rail for aluminum ramps at the rear of the vehicle. - Control valves for the hydraulic widening of the superstructure, mounted on the right side of the semi-trailer. (± 4 kg) - White reflector tape according to EU regulations, red on the sides and rear. - Electro-hydraulic unit at the rear under the loading area. (± 45 kg) - Holder for a pair of warning signs on the front wall. - Four warning signs, approximately 400 mm extendable, approximately 423 x 423 mm, with an LED position light (± 25 kg). - On the warning signs, a holder for a rotating beacon. Gedpfx Ajz N Nx Rop Debu - 7 pairs of rail pockets for plug-in rails, approximately 100 x 50 mm, in the outer frame of the loading area (± 21 kg) - Lift axle on the front axle, controlled by TEBS-E depending on the current axle load and loading condition (± 69 kg). - 6 pairs of recessed lashing rings along the central beam (LC 5,000 daN). - 1 pair of recessed lashing rings along the central beam at the rear (LC 10,000 daN). (± 27 kg) - A painted layer of sand on the diamond plate on the gooseneck and in the loading area as anti-slip protection. - 1 LED reversing light, each on the left and right, in front of the first axle. - 2 LED work lights mounted on the rear panel. - An acoustic warning signal when reversing. ACCESSORIES - Cable for supplying the electro-hydraulic unit and/or the electric winch (approximately 35 mm², approximately 3.5 m long, max. 250A) between the semi-trailer and the tractor unit with a plug connection (NATO-NATO). FIFTH WHEEL BRACKETS JOST fifth wheel brackets, mechanical, with a 2-spee

Condition: used, maximum load weight: 37,885 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, Equipment: ABS, Excerpt from Equipment List Loading Platform * in extendable design with a rear slope of approximately 1,000 mm x 8° Hardwood Decking * approximately 48 mm thick, with ribbed metal sheeting over the axles JOST King Pin * (mechanical) with 2-speed gearbox for an approximate lifting capacity of 24 tons (approximate test load of 50 tons) BPW Axles and Suspension * 2 fixed axles * 1 trailing axle * Technical axle load: 12,000 kg each Gbjdpfx Aozv A Aqjp Dju Air Suspension * with lifting and lowering valve Braking System * in accordance with EU regulations with EBS-E (2S2M) Accessories * 2-inch king pin * One galvanized steel front panel, approximately 400 mm high * Load manometer for determining axle loads, including load diagram * Aluminum side and rear walls on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * One galvanized toolbox integrated into the sloping gooseneck (± 47 kg) * 3 pairs of WADER container pockets in the loading platform for a 20' (30') or 40' container. (± 30 kg) * 6 pairs of stake pockets for pluggable stakes, approximately 100 x 50 mm, in the outer frame of the loading platform. (± 18 kg) * Galvanized extensions, extendable by approximately 230 mm on each side (± 230 kg) * Lift axle on the front axle * Adjustable mounting rails for aluminum ramps at the rear of the vehicle * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear (± 16 kg) * Four warning panels, extendable by approximately 400 mm, approximately 423 x 423 mm, with an LED position light. (± 25 kg) * A mounting bracket for a rotating beacon on the warning panels * One rotating beacon supplied separately * HRM Metallization (High Resistance Metallization) Painting * Top coat, single color in RAL 3002 carmine red.

Condition: new, maximum load weight: 39,150 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: Gooseneck with beveled front corners at approximately 45° and a rear bevel of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick. Gbsdpfxoz Rr R So Ap Deu Loading platform: Loading platform with a rear bevel of approximately 1,000 mm x 8°. 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings located horizontally at the front of the loading platform (LC 10,000 daN). Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN). Hardwood decking approximately 48 mm thick; diamond plate decking over the axles. Kingpin: JOST kingpins (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 t (approximate test load of 50 t). Axles: BPW axles and suspension, 2 fixed axles, 1 steered axle. Technical axle load: 12,000 kg each. Electro-magnetic reverse lock activated via reverse gear and manually. Air suspension with lifting and lowering valve. Tires: Tires 235/75 R 17.5 3PMSF – Manufacturer of our choice. TPMS: TPMS tire pressure monitoring system according to ECE R 141. Braking system: WABCO braking system in accordance with EU regulations with EBS-E (2S2M). Steel structure: Steel structure made of high-strength fine-grain steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa). Electrical system: Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). All LED side marker lights flash with the turn signal. ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets. Connection according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098. Painting: Complete steel structure automatically blasted with a shot-blasting system after welding. Second blasting process with corundum for optimal adhesion of the coating system. HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. Final coating with 2 layers of 2K topcoat, single color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint not possible. Coating tested in the salt spray test according to ISO 9227-NSS. Sealing of cavities with special wax. Includes the following additional equipment: - 2-inch kingpin - One galvanized steel front bulkhead, approximately 400 mm high. - One spare wheel holder in front of the front bulkhead. - Mounting rail for aluminum outrigger ramps on the gooseneck with integrated impact protection (± 56 kg). - Galvanized folding supports under the bevel of the loading platform. - One bracket for a rotating beacon on the rear of the trailer. - On the gooseneck and on the rear plate, left and right, one bracket each for the warning signs including socket. - Load meter for determining the axle loads, including load diagram. - 1 pair of recessed lashing rings along the center beam at the rear in the bevel (LC 10,000 daN). - Additional attachment option for the license plate of the SZM on the rear right side of the trailer. Includes special accessories On the gooseneck, aluminum sideboards and rear panel, pluggable, approximately 2,4

Condition: used, maximum load weight: 37,150 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment list. Complete equipment available upon request. Gooseneck * with angled front corners approximately 45° and rear slope approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick, extendable loading platform Loading platform * extendable design with rear slope approximately 1,000 mm x 8° Gbjdpez N Nwyefx Ap Deu * 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, diamond plate flooring over the axles Kingpin supports * JOST kingpin supports (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Tires * 235/75 R 17.5 3PMSF * TPMS: TPMS tire pressure monitoring system according to ECE R 141 * Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. * For correct display, the tractor unit must be able to transmit and display this data. Axles * BPW axles and suspension, 2 fixed axles, 1 steerable axle * Technical axle load: 12,000 kg each * Electro-magnetic parking brake activated via reverse gear and manually Air suspension * with lifting and lowering valve Braking system * in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting * Complete steel construction automatically blasted with a shot blasting system after welding * Second blasting with corundum for optimal adhesion of the coating system * Final painting with 2 layers of 2K topcoat * solid color in RAL 3002 carmine red * in accordance with the RAL system 841GL * Rims in silver gray * Rear section metallic and in RAL 9010 (pure white) * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Electrical system * in accordance with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the connection bar at the front with 24N, 24S & 15-pole sockets in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Included accessories * Axle tool * 2-inch kingpin * One galvanized steel front wall, approximately 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection bar at the front * Mounting in the rear area of the gooseneck for aluminum loading ramps * Galvanized folding supports under the slope of the loading platform * One mounting for warning signs on the gooseneck and on the rear panel, left and right * including socket loadometer for determining the axle loads including load diagram * Aluminum side walls and rear wall on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized locking strips are removable. (Length of the superstructure approx. 2,560 mm) * A toolbox galvanized, integrated in the angled gooseneck * 3 pairs of WADER container pockets in the loading platform for a 20' (30') or a 40' cont

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: Gsdpfx Apew Tpq Ds Djbu - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: new, maximum load weight: 36,020 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our full vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Complete equipment details available on request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate above the axles Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating covering C40/5 (point load approx. 2.8 t on a surface of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections and hydraulic lifting system * Maximum load per pair: 30,000 kg Gbjdpfx Asy Auhujp Dou Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock activated via reverse gear and manually * Air suspension with raise/lower valve Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations, LED lighting 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to guarantee optimum corrosion protection * Finishing coat: 2 layers 2K topcoat, solid colour RAL 3002 carmine red as per RAL system 841GL * Rear section metallised and painted RAL 9010 (pure white) * Rims in silver Included accessories: * One bracket for warning signs on the gooseneck and at the rear left and right, including socket * 1 spare wheel holder under the loading area, right in the direction of travel * 2" kingpin * One galvanized steel front wall * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with brackets on the bulkhead * 3 height wooden boards * Galvanized folding supports under the loading area bevel * Bracket for rotating beacon at rear of trailer * Height-adjustable tarpaulin structure – approx. 3,960 mm * Galvanized front wall with tensioning system for sliding curtains, height adjustable by approx. 400 mm * EDSCHA roof, sliding forward on aluminum roof girder profiles (screwed to front and rear wall) * 3 pairs of sliding stakes in the loading area * The body is hydraulically extendable to the left and right at the rear by approx. 750 mm * Sliding roof with pivoting portal crossbeam * Sliding curtain with approx. 700 mm reserve length, ratchet straps at approx. 600 mm intervals. Height O

Condition: new, maximum load weight: 47,300 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel (approx. 750 mm x 10°) * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading platform with rear bevel (approx. 1,000 mm x 8°) * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hooking tensioning straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick; over the axles, diamond plate surface Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Tyres: * 235/75 R 17.5 3PMSF tyres, brand at our discretion Axles: * BPW axles, two rigid axles, two trailing steering axles, air-suspended, with drum brakes, lifting/lowering function * Steering axles with electromagnetically-activated reverse lock (via reverse gear or manually) * Axle tools Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (4S3M), no connecting lines to the tractor unit Steel structure: * Steel construction from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield 355 MPa) S690QL/S700MC (yield 690 MPa) Electrical system: * Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets (ISO standard: 24N - ISO 1185, 24S - ISO 3731, 15-pin - ISO 12098) Paintwork: * Premium and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-color topcoat RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the bulkhead (without spare wheel) * 2 inch kingpin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection bar * Receptacle at the rear of the gooseneck for ALU loading ramps * Galvanized drop-down supports under the loading area bevel * Bracket for a revolving beacon at the rear of the trailer * Brackets left and right on the gooseneck and rear plate for warning signs including socket * TPMS tire pressure monitoring system compliant with ECE R 141 * Removable ALU sideboards and rear wall on the gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized insert posts are removable (body length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck Gbsdpfoyvnfgox Ap Deu * 3 pairs of WADER container locks in the loading platform for one 20' (30') or one 40' container * Sliding hook-in rails for ALU loading ramps at the rear of the vehicle * 6 pairs of pockets for plug-in posts, approx. 100 x 50 mm in the outer frame of the loading area * Galvanized extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control based on current axle load and load status * 2 LED reversing lights mounted on the rear plate * 2 pairs of ferry-

Condition: used, maximum load weight: 34,030 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: Gooseneck with rear slope, approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approximately 30 mm thick. Loading platform: Loading platform can be hydraulically raised and lowered after the gooseneck, length approximately 2,800 mm, with rear slope approximately 1,000 mm x 8°. 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings that can be folded inwards on the center beam at the front (LC 10,000 daN). Grid floor C40/4 (point load approximately 2.3 t on an area of approximately 20 x 20 cm) above the axles. Diamond-plate floor. Two-piece steel ramps: One pair of galvanized two-piece steel ramps in reinforced design, approximately 3,185 + 1,420 x 1,250 mm, with grid floor C40/5 (point load approximately 8 t on an area of approximately 20 x 20 cm). Ramp with hydraulically raising and folding ramp sections and hydraulic lifting mechanism, maximum load per pair: 40,000 kg. In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm when in the driving position. Landing gear: JOST landing gear (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Tires: 235/75 R 17.5 3PMSF TPMS tire pressure monitoring system according to ECE R 141 Axles: BPW axles and suspension. 2 axles rigid, 1 axle steered. Technical axle load: 12,000 kg each. Electro-magnetic parking brake via reverse gear and can also be activated manually. Air suspension with raising and lowering valve. Braking system: WABCO braking system according to EU regulations with EBS-E (2S2M). Colors: Semitrailer RAL 3002 carmine red. Rims silver. Tarpaulin in RAL 9006 silver. Including accessories: 1 spare wheel holder under the loading platform on the right in the direction of travel. 2-inch King Pin. One galvanized steel front panel. Yellow-red air couplings on the galvanized connection strip at the front. 4 wheel chocks with holder on the front panel. 3 height-adjustable wooden planks. Galvanized folding supports under the slope of the loading platform. Height-adjustable tarpaulin superstructure *3,960 mm*. Galvanized front panel with a tensioning mechanism for the sliding curtains. Roof from EDSCHA, height-adjustable by approximately 400 mm, can be moved forward on aluminum roof rail profiles (screwed to the front and rear walls). 3 pairs of adjustable load securing bars in the loading platform. The superstructure can be widened by approximately 750 mm on the left and right at the rear by hydraulic means. Sliding tarpaulin with approximately 700 mm reserve in length, with lashing straps at intervals of approximately 600 mm. Top edge of the superstructure approximately 3,960 mm (loaded). Driving with an open sliding tarpaulin is not permitted and will result in damage to the tarpaulin. Gbodszu Ebtspfx Ap Dju On the diamond plates on the gooseneck and on the loading platform, a sand layer is applied as an anti-slip coating. Cover plates to bridge the gap between the ramps and the loading platform. Electro-hydraulic unit at the rear under the loading platform. On the gooseneck and on the ramps, one holde

Condition: new, maximum load weight: 46,800 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck * Gooseneck with beveled front corners at approximately 45° and a rear bevel of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Extendable platform * with rear bevel of approximately 1,000 mm x 8° * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) * 3 pairs of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings, lying horizontally at the front of the platform (LC 10,000 daN) * Recesses in the outer frame of the platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with non-slip steel plate flooring over the axles Axles * BPW axles and suspension * 1st axle rigid, all other axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool kit * Tires * 245/70 R 17.5 3PMSF * Load index (146/146 F) * TPMS: TPMS tire pressure monitoring system according to ECE R 141 Kingpin * JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * in accordance with EU regulations with EBS-E (4S3M) Paint finish * Complete steel construction automatically blasted with a blasting wheel system after welding * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat * solid color in RAL 3002 carmine red according to the RAL 841GL system * Rims in silver gray. Rear section metallized and painted in RAL 9010 (pure white) * Metallic paint not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Steel construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system * in accordance with EU regulations Lighting * 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pole sockets * Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Incl. the following additional equipment * 2-inch kingpin * One galvanized steel front wall, approximately 400 mm high * Electro-hydraulic unit (± 45kg) Gbjdpozk S Dmefx Ap Dou * Steering from the front and rear via cable remote control, operated via push buttons, with single-axle steering (without installation in the central beam) * 1 pair of recessed lashing rings along the central beam at the rear in the bevel (LC 10,000 daN) (± 3kg) * On the gooseneck, aluminum side boards and rear wall, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized plug-in stakes are removable. (Length of the structure approximately 2,560 mm) (± 46kg) * A galvanized toolbox, integrated in the beveled gooseneck (± 47kg) * 3 pairs of WADER container pockets in the platform for a 20' (30?) or a 40? container (± 30kg) * 6 pairs of stake pockets for plug-in stakes, approximately 100 x 50 mm, in the outer frame of the platform (± 18kg) * Extensions, galvanized, extendable by app

Condition: used, Year of construction: 2022, Hardwood Azobe boards, sourced from our own semi-trailer low-loader. Gbjdpoz Hmqqsfx Ap Dou Trailer is from 2022 Dimensions; - 6 pieces - 275 x 19.5 x 4.5 cm. - 8 pieces - 262 x 19 x 4.5 cm. - 6 pieces - 95 x 19.5 x 4.5 cm. - 8 pieces - 91.5 x 21.5 x 4.5 cm. - 8 pieces - 43 x 21.5 x 4.5 cm. - 10 pieces - 68.5 x 17.5 x 3 cm.

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, Excerpt of Equipment Gooseneck * with angled front corners approx. 45° and rear angle approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood decking approx. 30 mm thick Loading Platform * in double-extendable design with rear angle approx. 500 mm x 8° * 6 pairs of lashing rings that fold outwards (LC 5,000 daN) * 4 pairs of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings positioned horizontally at the front of the loading platform (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood decking approx. 48 mm thick, with diamond plate decking over the axles * Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles * BPW axles and suspension, all axles with hydro-mechanical forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Tires * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Kingpin * JOST kingpins (mechanical) with 2-speed gear for approx. 24 t lifting capacity (approx. 50 t test load) Braking System * in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the semi-trailer tractor Painting * First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * A high-quality 2-component (2K) * Topcoat, single color in RAL 3002 carmine red * Rear section metallic and painted in RAL 9010 (pure white) * Metallic paint not possible Steel Construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System * in accordance with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S & 15 pole * Connection according to ISO. 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Incl. the following additional equipment * 2-inch kingpin * One galvanized steel front panel, approx. 400 mm high * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with holder on the front panel (± 5kg) * A spare wheel holder in front of the front panel * Electro-hydraulic power unit (± 45kg) * Steering from the front and rear by means of cable remote control operated via push buttons, with single-axle control (without installation in the tractor unit) * Mounting at the rear of the gooseneck for aluminum loading ramps * European reflector plates (red-yellow) at the rear of the trailer * Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer Gbsdpfx Apezlwm Ns Dju * On the gooseneck and at the rear panel, one holder each on the left and right for warning signs including socket * Mounting rail for aluminum loading ramps at the rear of the vehicle * A holder for a rotating beacon at the rear of the trailer * Galvanized folding supports under the angle of the loading platform * A mud flap at the rear of the trailer * Manual and description on USB stick * Speed stickers 80 km/h at the rear and on both sides * Load gauge for determining the axle loads including load diagram.

Condition: used, maximum load weight: 36,515 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck with front corners angled approximately 45° and rear taper of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick. Extendable Loading Platform: Extendable loading platform with rear taper of approximately 1,000 mm x 8°. 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN). Hardwood decking approximately 48 mm thick, with diamond plate decking over the axles. Axles: BPW axles and suspension, all axles with hydro-mechanical forced steering. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Axle tool. Tires: Tires 245/70 R 17.5 3PMSF, load index (146/146 F) - manufacturer of our choice. Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking System: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Steel Structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Gbjdpfjzqiiaox Ap Dsu Includes the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high. - Yellow-red air couplings on the galvanized connection bar at the front. - 4 wheel chocks with holder on the front wall (± 5kg) - One spare wheel holder in front of the front wall. - Electro-hydraulic unit (± 45kg) - Steering from the front and rear by means of a cable remote control with push buttons, with single-axle steering control (without installation in the tractor unit) - Mounting in the rear area of the gooseneck for aluminum loading ramps. - European reflector signs (red-yellow) on the rear of the trailer. - Yellow reflector tape according to EU regulations on the side, on the extendable section and at the rear of the trailer. - On the gooseneck and on the rear panel, one holder on the left and right for warning signs including socket. - One holder for a rotating beacon on the rear of the trailer. - Galvanized folding supports under the taper of the loading platform. - One mud flap on the rear of the trailer. - Manual and description on a USB stick. - Speed stickers 80 km/h on the rear and on both sides. - Load measuring device for determining the axle loads including load chart.

Condition: new, maximum load weight: 48,930 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck * with beveled front corners, approximately 45° and with rear bevel approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Loading platform * in a double-extendable design with rear bevel approximately 500 mm x 8° * 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 4 pairs of lashing rings, foldable outwards (LC 10,000 daN) Gbodpfezlwm Asx Ap Deu * 1 pair of lashing rings, horizontally at the front of the loading platform (LC 10,000 daN) * 1 intermediate table, approximately 250 mm * Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with diamond plate flooring over the axles Axles * BPW axles, hydro-mechanically forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tires * 245/70 R 17.5 3PMSF, load index (146/146 F) * TPMS tire pressure monitoring system according to ECE R 141 Kingpin * JOST kingpins (mechanical) with a 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * according to EU regulations with EBS-E (4S3M) Steel structure * made of high-strength fine-grained steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) * S690QL/S700MC (yield strength 690 MPa) Electrical system * according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting * Complete steel structure automatically blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red, according to the RAL 841GL system * Rims in silver. Rear part metallized and painted in RAL 9010 (pure white) * Metallic paint is not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Including the following additional equipment 2 inch kingpin * Electro-hydraulic unit (± 45 kg) * Follow-up steering from the front and rear, controllable by means of a cable remote control via push buttons, with single-axle control (without installation in the central control unit) * One bracket for warning signs on the left and right of the gooseneck and on the rear panel, including socket * One bracket for a rotating beacon on the rear of the trailer * Aluminum side panels and rear panel on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized stake pockets are removable. (Length of the superstructure approximately 2,560 mm) (± 46 kg) * A tool box, galvanized, integrated into the beveled gooseneck (± 47 kg) * 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40 or a 45' container (± 40 kg) * 7 pairs of stake pocket for stake pockets approximately 100 x 50 mm in the outer frame of the loading platform (± 21 kg) * Extensions, galvanized

Condition: new, overall weight: 58,000 kg, Year of construction: 2026, Semi-trailer, drop-deck MAX100 4 A 8.60 U Technical data Speed: 80 km/h Total weight: 60,800 kg Fifth wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Fifth wheel height (loaded): 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle distance: 1,360 mm Rear deflection radius: 2,300 mm Loading height (max. load): 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Gjdpog Sk T Djfx Ap Dobu Technical description Gooseneck With beveled front corners at 45° and rear bevel of approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area in extendable design with rear bevel of approx. 1,000 mm x 8° 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) 1 pair of lashing rings, horizontally mounted at the front in the loading area (LC 10,000) Hardwood flooring, approx. 48 mm thick, with diamond plate steel over the axles Ramps Two-part steel ramps One pair of galvanized two-part steel ramps, approx. 2750 + 1400 mm x 800 mm, with approx. 48 mm thick hardwood flooring Ramp with hydraulic up and folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable. Maximum load per pair: 40,000 kg Tires 235/75 R 17.5 Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard bead-blasted welded frame guaranteed by a 2-component zinc dust primer High-quality 2-component (2K) topcoat, solid color in RAL color shades of your choice Rear section metallized and painted in RAL 9010 (pure white). Fifth wheel: JOST fifth wheel (mechanical) with 2-speed gear for 24 t Lifting capacity (50 t test load) Steel construction made of high-strength fine-grain steels. Steel grades: Steel construction made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pole. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Accessories included: One galvanized steel front wall, approx. 400 mm high. 2" Kingpin 4 wheel chocks with holder on the front wall. One bracket for a rotating beacon on the rear of the trailer. SAF axles, two fixed axles, one steered axle, air-suspended, with drum brake, with lifting/lowering function. The trailing steered axle with electro-magnetic reverse lock, which can be activated via reverse gear or manually. Axle tool. Mounting in the rear area of the gooseneck for ALU support ramps. Galvanized folding supports under the bevel of the loading area. Mechanical locking of the locking of the loading area. One spare wheel with holder in front of the front wall. Yellow reflector tape according to EU regulations on the sides, on the extension and at the rear of the trailer. Yellow-red air couplings on the galvanized connection bar at the front. On the gooseneck and on the rear panel, one bracket each on the left and right for the warning signs including socket. One mudflap on the rear of the trailer. Manual and description On the gooseneck, plug-in ALU side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in posts are removable. Length of the superstructure approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container po

Condition: used, axle configuration: 3 axles, first registration: 06/1992, suspension: air, tire size: 9.5R17.5, color: red, Year of construction: 1992, Self-tracking axle / caster steering. Extendable. Loading bed length: 930 cm x 253 cm Loading height: 90 cm. Extendable. = Further information = Axle configuration Tire size: 9.5R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 30%; tire tread depth right outer: 30% Gbedpfxsy N S Rme Ap Deu Rear axle 2: Dual tires; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 30%; tire tread depth right outer: 30% Rear axle 3: Dual tires; steered; tire tread depth left inner: 30%; tire tread depth left outer: 30%; tire tread depth right inner: 30%; tire tread depth right outer: 30% Weights Unladen weight: 9,985 kg Payload: 35,015 kg GVW: 45,000 kg Identification Model number: SD 31 / SEMI TRAILER / EXTENDABLE = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: used, maximum load weight: 25,630 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 11/2024, next inspection (TÜV): 11/2026, Equipment: ABS,

Condition: used, maximum load weight: 16,300 kg, overall weight: 22,000 kg, axle configuration: 1 axle, first registration: 08/2022, next inspection (TÜV): 09/2026, BPW 10-ton axles, frame construction made of high-strength Domex 700, total loading area 11,800 mm, loading area length 8,350 mm, Knorr brake EBS 4s/2k (ASR), rear support legs foldable, 25,000 kg, pneumatic valve for adjusting the No. 4 wheel chocks, electric winch with remote control, 3x2 tie-down points in the platform outer frame (8 tons), aluminum frame L: 2,300 mm - W: 500 mm, hot-dip galvanized, toolbox, rollers for the loading platform, extendable bumper, ramp holder. Gbodjih E Hyjpfx Ap Dou

Condition: used, maximum load weight: 30,660 kg, overall weight: 43,000 kg, axle configuration: 2 axles, first registration: 03/2024, next inspection (TÜV): 03/2025, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment: Complete equipment available upon request. Loading Platform * Low-bed with central beam in extendable design * Length approx. 6,750 mm * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings lying horizontally at the rear of the loading platform (LC 10,000 daN) * The supply lines are protected in the central beam and adapt to the respective low-bed length. Gooseneck * Length approx. 3,900 mm * Gooseneck hydraulically adjustable up/down and extendable * Technical saddle load: 23,000 kg Rear Chassis * Short design with closed outer frame and diamond plate cover * Chassis with excavator well, which is closed in the rear half to accommodate the air tanks Gsdpfx Apozvt Tye Dsbu * 2 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) Axles * BPW axles * Hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Tires * 245/70 R 17.5 3PMSF – Manufacturer of our choice, load index (146/146F) Braking System * According to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork * High-quality 2-component (2K) * Topcoat in solid color RAL 3002 carmine red Incl. the following additional equipment: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with bracket. (± 5 kg) * Steering from the front and rear via cable remote control, operable via push buttons, with single-axle steering control (without installation in the tractor unit) * Electro-hydraulic unit (± 45 kg) * Yellow reflector tape according to EU regulations on the side, on the extension, and at the rear of the trailer * 1 wooden block, approx. 500x250x200 mm * Attachment rail for aluminum loading ramps at the rear of the vehicle * One bracket for a rotating beacon at the rear of the trailer * One mud flap at the rear of the trailer * European reflector plates (red-yellow) at the rear of the trailer * On the gooseneck and at the rear panel, one bracket each on the left and right for warning signs including socket * Manual and description on a USB stick * Speed stickers 80 km/h at the rear and on both sides * Load gauge for determining axle loads including load diagram * Incl. special accessories: On the gooseneck, aluminum side and rear walls, plug-in, approx. 2,440 x 400 mm (L x H) * The rear galvanized end crossbars are removable. (Length of the structure approx. 2,560 mm). (± 46 kg) * On the gooseneck, a separate air connection with an air gun. * 2 work lights with a switch on the trailer, mounted on the gooseneck platform on the left and right * 6 pairs of rung pockets for end crossbars approx. 100 x 50 mm in the outer frame of the loading platform * 2 pairs in the outer frame of the chassis (± 29 kg) * Extensions, galvanized, extendable by approx. 230 mm per side (± 262 kg) * Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw co

Condition: used, empty load weight: 14,100 kg, maximum load weight: 33,900 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 11/1999, suspension: air, tire size: 235/75 17,5, tire condition: 50 %, color: green, Year of construction: 1999, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 68574 Faymonville, Flatbed Trailer * Year of manufacture: 1999 * Air suspension * Steering axle * Forced-steered axle Gbsdpfx Ajyib Ahep Dju * Compressed air coupling head (red + yellow) * Connection plug: 2x7-pin * Lift and lower device * Extendable - telescopic semi-trailer * Suspension: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload: 33,900 kg * Permissible total weight: 48,000 kg * Axle manufacturer: SAF * Tyre condition, 1st axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre condition, 2nd axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre condition, 3rd axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre size: 235/75 R17.5 * Manufacturer: ES-GE * Extension faulty * Steering axles not functional * Mobile Disclaimer: Subject to alterations, prior sale, and errors excepted. More photos and videos are available on our website. Our comprehensive services include, for example: * Purchase/sale/rental of commercial vehicles * Fast and hassle-free financing * Arranging all (export) documentation * Order of export/customs number plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration services * Transfer/transport of commercial vehicles Contact our trained staff for advice—we are happy to assist you.

Condition: excellent (used), axle configuration: 2 axles, first registration: 09/2020, color: red, Year of construction: 2020, Equipment: ABS, Rear axle 1: Twin tires Rear axle 2: Twin tires; Steered Unladen weight: 8,060 kg Loading platform height: 86 cm Extendable body: Yes Technical condition: Very good Visual condition: Very good Price: On request FAYMONVILLE F-S42-111A SEMI LOWLOADER 2x SAF axles 1x steering axle (trailing) Tire size Extendable loading platform Size: 680 cm + 420 cm extendable / Total platform length: 1,100 cm Platform width: 254 cm Platform height: approx. 86 cm Gooseneck length: 330 cm Lashing eyes, stanchion sockets, twistlocks Follow us on Instagram: GEURTSTRUCKS Lowloader is year 2016 but sold new in 2020 Gbsdsx Upxxopfx Ap Deu We speak German Hablamos Español We speak English

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Gbodpfxexarl Nj Ap Deu Extract from the equipment list. Full equipment details available on request. Loading Platform: - Lowbed with external beams in extendable SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking mechanism - Supply lines protected inside the extendable side rails, automatically adjusting to the current bed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for attaching RUD screw-on rings Gooseneck: - Gooseneck in SNT design for optimized platform length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractors: 4x2, 6x2 Rear Chassis: - Rear chassis in short version with closed external frame and checker plate cover - Running gear with excavator recess, closed in the rear half to accommodate the air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings horizontal, front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Technical axle load per axle: 12,000 kg - Air suspension with lift and lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF - Manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transmission to the truck via the standardized EBS interface in accordance with ISO 11992 - The truck must be capable of processing and displaying this data for correct operation Braking System: - Braking system according to EU regulations with EBS-E (2S2M) Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with indicators - ASPÖCK-UNIBOX at the front connection point with 24N, 24S, and 15-pin sockets as per standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel Construction: - Steel construction from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure is automatically shot-blasted after welding using a blasting turbine system - Second blasting process with corundum for optimal adhesion of coating system - HRM metallization of complete chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection - Final paint finish with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, as per RAL system 841GL - Rims in silver - Rear section metallized and painted RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test as per ISO 9227-NSS - Cavities sealed with special wax Including the following additional equipment: - 2" King pin - One galvanized steel front wall, approx. 400 mm high - Remote steering of front and rear axles by cable remote control with pushbuttons, including single track axle monitoring (without installation in the tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - Preparation for mounting container locks for 1x 20' or 1x 40' container on the external beams - Without container locks

Condition: used, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 08/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. GOOSENECK * Designed in SNT for optimized loading area length * Length approx. 3,700 mm, with a rear slope of approx. 1,000 mm x 10°. For SZM: 4 x 2, 6 x 2, and 6 x 4. * Front panel made of steel, plug-in type, approx. 400 mm high * ASPÖCK-UNIBOX on the connection strip at the front with sockets * 3 kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches * Without installation of the supply connections on the SZM * Outriggers on the gooseneck with mounting holes for screw-on lashing rings * The first hole is approx. 200 mm from the front, followed by one every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm thick hardwood deck above the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the turntable, approx. 500 mm wide * 1 pair of recessed bolster pockets on the gooseneck for plug-in bolsters, approx. 100 x 50 mm LOADING AREA Gbedpfjzz Ei Rox Ap Dsu * In an extendable design, length approx. 8,800 mm with a slope at the rear of approx. 500 mm x 10°. * A recess in the loading area and extending into the slope for accommodating the excavator arm, approx. 2,490 x 750 x 210/290 mm (L x W x H). * TPMS tire pressure monitoring system according to ECE R 141. * Mechanical landing gear with 2-speed gearbox and crank. JOST Module B * Static test load = approx. 50,000 kg * Continuous hardwood deck, approx. 50 mm thick, on the loading area and interrupted between the axles (this increases the coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with a large cross-section. * 1 pair of fixed wheel recesses in front of the axles, open to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area - 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axles. Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, which can also be used as widening boards (if the vehicle is equipped with extendable wideners) * 1st axle with starting aid BPW axles and suspension * 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock via reverse gear and can be activated manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve. * 235/75 R 17.5 3PMSF twin tires. Manufacturer of our choice HYDRAULIC LOADING RAMPS * DR-15/60-900-4350-HB-HV-M * A pair of two-piece steel ramps * with a length of approx. 4,350 mm and a width of approx. 900 mm. Hardwood deck * Hydraulically folding ramp tips. Ramps can be individually shifted hydraulically outwards by approx. 235 mm and inwards by approx. 215 mm * Maximum load and angle of inclination according to the technical data sheet: C465497 * In accordance with Regulation 2021/535/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm in the driving position. * Hardwood deck on the slope of the loadin

Condition: used, Year of construction: 2007, 2007 | Faymonville STBZ3 | Used Low Bed Semi-trailer 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 32500 or Make an Offer. Godpfx Asznl Tvep Djbu Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 12 inspection points 12 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Tiltable bed trailer, with some body work to do. Has its own hyd-agregat. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40866 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, maximum load weight: 92,045 kg, overall weight: 1,26,000 kg, axle configuration: > 3 axles, Equipment: ABS, Excerpt from the equipment list Complete equipment upon request * 1 x Gooseneck MAX710-Neck-V-30-2.70 * Gooseneck with hydraulic lifting/lowering and extendable function * Length approx. 3,650 mm. For SZM 6x4 or 8x4 * Steel front panel, approx. 400 mm high * Plug-in aluminum side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Incl. gantry for suspending the supply lines * The SZM tank must contain at least 80 l with MAX trailer couplings, otherwise the customer must provide the couplings ex works * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * TPMS tire pressure monitoring system * Two toolboxes INOX, approx. 855 x 340 x 390 mm, on the gooseneck, left and right (± 48 kg) * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Hydraulic connection lines between the power pack and the connection plate on the gooseneck * Radio remote control: operation of the power pack, start/stop of the diesel engine * Operation of the trailing axle, in addition to the cable remote control * with 2 LED indicator lights on the receiver for single-lane operation Gbjdpezzhfnefx Ap Dou * Operation of raising/lowering the gooseneck * Operation of raising/lowering the suspension of the axle assemblies * Multicoupling hydraulic connections on the gooseneck * 1 LED work light, left and right, on the rear panel of the gooseneck, with separate on/off switch * Four warning boards, extendable by ± 2,000 mm, approx. 423 x 423 mm, with an LED position light and a mounting for a rotating beacon. (± 122 kg) * 1 x 3-axle compact front axle * MAX710 axle PA-F-3-19.5-1.36-2.85 * Hook connection at the front and rear * Length: approx. 3,560 mm * Axle width: approx. 2,850 mm * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication system for a 3-axle axle assembly with standard grease NLGI-2. * A 7-pole socket, left and right, at the rear of the front axle for the warning boards * TPMS tire pressure monitoring system according to ECE R 1411 * LED work lights, left and right, at the rear of the front axle with a separate on/off switch * Surface of the front axle with a sand-coated paint finish for slip resistance * Multicoupling hydraulic connections on the front axle * 1 x Low loader bridge: MAX710-Low-loader-BB-A-7.15-(430)-2.85 * Telescopic low loader bridge BB-A with drivable bridge hooks at the front and a bolt-on coupling at the rear * Basic width: approx. 2,850 mm Length: approx. 7,150 mm * Beam height: approx. 430 mm Beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm * 6 pairs of steel chequered plate with rubber matting approx. 1,000 mm, 1 pair approx. 500 mm (± 1,660 kg) * Possibility to screw in (ø approx. 40 mm) every approx. 500 mm on the outside of the top chord of the outer tube of the low loader bridge for screw rings (LC 16,000 daN) * Possibility to screw in M30 every approx. 1,000 - 1,200 mm on the outside of the inner tube of the low loader bridge for mounting screw rings (LC 10,000 daN) * Folding widening extensions with steel chequered plate, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * TPMS tire pressure monitoring system * Pair of loose HeProLen plastic wheel chocks with climbing strips approx. 1,200 x 450 x 50/400 mm. (± 130 kg) * 2 pairs of screwable lashing rings M30 (LC 12,000 daN). (± 13 kg) * Ce

Condition: used, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2017, * SAF axles * Wheel recesses * Hydraulically adjustable loading ramps (width) * Air suspension Gedpfxowta Alj Ap Djbu * Extendable * Tare weight: 11,020 kg -----Internal vehicle number: 11010----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp – German, English – WhatsApp – German, English, Arabic.