Used Faymonville Prefamax Innenlader 3 X Lasi for sale (95,085)

Condition: new, maximum load weight: 35,060 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Below is an excerpt of the equipment. Complete equipment list available upon request. GOOSENECK: Gooseneck designed as a loading platform with a surface made of aluminum tear-plate sheeting. Hydraulic lifting drawbar, adjustable by approximately -280/+250 mm. Two kingpin positions at approximately 2,300 mm and 2,000 mm. For semi-trailer: 4 x 2, 6 x 2, or 6 x 4. - 2-inch kingpin. - 3 pairs of recessed lashing rings on the gooseneck (LC 6,300 daN). - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets. - 24N connection according to ISO-1185. - 24S connection according to ISO-3731. - 15-pin connection according to ISO-12098. - Yellow-red air couplings on the front connection bar. - Lighting for the operation of the gooseneck, suspension, and hydraulic locking, with on/off switch. - Brackets for hanging the supply lines on the front of the gooseneck. - Operation of all work lights in the gooseneck area via on/off switches on the gooseneck (operation of the work lights from the semi-trailer is not possible in this case). Ndedpfjz N Nx Djx Akmoc LOADING PLATFORM: Loading platform, length approximately 9,500 mm, with angle profiles attached underneath to accommodate the load pallets (distance from kingpin to center of axle unit approximately 8,000 mm). - BPW axle stub, with drum brakes and single-wheel suspension, hydraulic axle equalization with lifting and lowering mechanism. - Lowering lock on the axles in case of suspension air spring failure, designed for a maximum pallet height of 150 mm. - 385/65 R 22.5 (M+S) - Manufacturer of our choice. - Mechanical drop-side supports for approximately 48,000 kg of support load. - Access ladder mounted on the front right with 2 retractable handrails. - Removable full fender on both sides in front of the axle unit. - WABCO Roll Stability Support (RSS). - 9 pairs of lashing rings on the longitudinal beams (LC 6,300 daN). - Grid flooring support on the longitudinal beams, at the same height between the guide rails of the load securing system. - The first and last axle on the left and right can be manually lifted. - Storage box on the left and right behind the axle unit, protected from splashing water. - Beveled rear end for easier insertion of the load pallet. - Eyelets attached to the rear crossmember for mechanical locking. - Rear door with cross bracing, hinged on the left and hydraulically locked on the right, can be locked horizontally at 90°, 105°, and 270°. - Underrun protection that can be folded upwards for the transport of up to 4 empty standard pallets. - License plate with holder including lighting on the rear door. - One 7-pin socket on the rear crossmember. - Electro-hydraulic unit for operating the hydraulic functions (without installation in the semi-trailer). - TPMS tire pressure monitoring sensors installed in all wheels. - TPMS tire pressure monitoring system according to ECE R 141. - Indicator lights to display the nominal ride height in the vehicle control area. - 1 odometer mounted on the left. - 2 axle load gauges mounted on the left side, including axle load diagram. - 2 rubber buffers in the front of the loading platform as a stop for the load pallet. - Hydraulic preparation including control for the installation of 4 pairs of our hydraulic load securing systems. - 1 spare wheel holder on the right in the direction of travel. - Acoustic warning signal

Condition: good (used), axle configuration: 3 axles, first registration: 12/2002, suspension: air, Year of construction: 2002, Equipment: ABS, = Additional Options and Accessories = - EBS - Lift axle - Air suspension = Further Information = Suspension: Air suspension Rear axle 1: Steerable Rear axle 2: Steerable Rear axle 3: Steerable Unladen weight: 12,940 kg Payload: 21,060 kg GVW: 34,000 kg Technical condition: good Optical condition: good Vehicle number: Low-bed trailer: 15 Ndedpfx Akezvzt Iomec Faymonville / 3 axles, steerable, with remote control SAF / Extendable .: YA9TL35F02113453 SAF 3 x Steerable axles with remote control Unladen weight: 12,490 kg Total weight: 34,000 kg Length: 9.20 m, with extension 15.10 m + extension 20.40 m, total length 24.40 m Width: m = Company Information = No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: like new (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: X-Wine 3, operating hours: 824 h, overall weight: 850 kg, This machine has been used in a professional winery environment and has been carefully maintained according to the manufacturer's recommendations. The filter is in excellent working condition and ready for immediate use. Nedpfjz Dvzgox Akmodc The Bucher Flavy X-Wine 3 provides efficient and gentle wine clarification while preserving wine quality and minimizing product losses. An ideal solution for wineries looking for a reliable, modern crossflow filtration system without the lead time and cost of a new unit.

Condition: used, Year of manufacture: 2014 Year of construction: 2014 Faymonville Multimax F-S43-1AAF 3 axle stepframe trailer 06-2014 Airsuspension 1 positive steert axle Double hydraulic ramps Hydraulic floor Its own 24 V powerpack for the hydraulics Winch Loadingfloor lenght 9.2 m ABS Ndjdpez I A Tqofx Akmoc HU tuv 02-2026

Condition: used, functionality: fully functional, Year of construction: 2012, control type: manual, actuation type: electric, working width: 1,250 mm, cutting angle (min.): 1.5 °, stroke rate (min.): 35 1/min, sheet thickness (max.): 3 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 650 mm, back gauge travel distance R-axis: 650 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 24 V, overall weight: 1,450 kg, total length: 1,920 mm, total width: 2,130 mm, total height: 1,350 mm, number of support arms: 2, Equipment: CE marking, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Year of manufacture: 2012 Cutting length: 1250 mm Sheet thickness: 3 mm Cutting angle: 1° 30' Strokes/min: 35 Working height: 800 mm Rear gauge, motor-adjustable, max. 650 mm Ndedpfxoz S Hu Uj Akmjc Table width: 305 mm Motor power: 5.5 kW Length: 1920 mm Depth: 2130 mm Height: 1350 mm Connection: 400V, 13 A Weight: 1450 kg High operator safety thanks to protective guard and light barriers Activation via foot pedal, keeping hands free for positioning the sheet Support arms with scale on the front for large sheets Motor-driven adjustment of the precise rear gauge via control panel Spring-mounted clamping beam with rubber plates

Condition: used, axle configuration: > 3 axles, first registration: 10/2006, total width: 2,850 mm, suspension: other, tire size: 285/70R19.5, color: black, Equipment: ABS, = Additional Options and Accessories = - Central lubrication system = Notes = Faymonville Jeep dolly D3 Year 2006. 1 x lift axle. 1 x friction steering axle / trailing arm steering. Air suspension. Max. technical weight: 56,000 kg. Faymonville STBZ-5VA Year 2006. Swivel axle. Removable gooseneck. Movable table. Extendable bed: 400 cm. Loading bed: 650 + 400 cm. 50,000 kg gooseneck capacity. Max. technical weight: 119,680 kg. = Further Information = Axle configuration Tire size: 285/70R19.5 Brakes: Drum brakes Front axle 1: Twin tires; tire tread depth left inside: 15%; tire tread depth left outside: 60%; tire tread depth right inside: 60%; tire tread depth right outside: 60%; suspension: air suspension Front axle 2: Twin tires; tire tread depth left inside: 30%; tire tread depth left outside: 30%; tire tread depth right inside: 40%; tire tread depth right outside: 60%; suspension: air suspension Front axle 3: Twin tires; steerable; tire tread depth left inside: 30%; tire tread depth left outside: 70%; tire tread depth right inside: 60%; tire tread depth right outside: 70%; suspension: air suspension Rear axle 1: Twin tires; steerable; tire tread depth left inside: 30%; tire tread depth left outside: 60%; tire tread depth right inside: 40%; tire tread depth right outside: 70%; suspension: hydraulic suspension Rear axle 2: Twin tires; steerable; tire tread depth left inside: 50%; tire tread depth left outside: 50%; tire tread depth right inside: 30%; tire tread depth right outside: 75%; suspension: hydraulic suspension Rear axle 3: Twin tires; steerable; tire tread depth left inside: 60%; tire tread depth left outside: 60%; tire tread depth right inside: 60%; tire tread depth right outside: 60%; suspension: hydraulic suspension Ndodpfoxbng Eex Akmec Rear axle 4: Twin tires; steerable; tire tread depth left inside: 60%; tire tread depth left outside: 60%; tire tread depth right inside: 40%; tire tread depth right outside: 50%; suspension: hydraulic suspension Rear axle 5: Twin tires; steerable; tire tread depth left inside: 70%; tire tread depth left outside: 70%; tire tread depth right inside: 20%; tire tread depth right outside: 70%; suspension: hydraulic suspension Weights Unladen weight: 36,600 kg Payload: 99,400 kg GVW: 136,000 kg Financial information Price: On request Identification Type number: STBZ-5VA + 3 AXLE JEEP DOLLY / E = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB; Wouter Greutink NL-DE-GB-ES-IT; Govorim po ryccki). We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, Year of construction: 2004, functionality: fully functional, The machine is used, but in good condition. Nsdpfxozp Ik To Akmedc It can be inspected while in operation.

Condition: used, axle configuration: 3 axles, first registration: 04/2019, loading space length: 9,200 mm, loading space width: 2,540 mm, suspension: air, tire size: 245/70R17.5, color: grey, Faymonville F-S43-1AAF 660 cm Extendable Hydraulic ramps Ndjdozinblepfx Akmec Winch Forced steering = Further information = Tire size: 245/70R17.5 Suspension: Air suspension Front axle: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Center axle: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Unladen weight: 13,500 kg Payload: 47,500 kg GVWR: 61,000 kg Model number: F-S43-1AAF / EXTENDABLE / HYDRAU = Company information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, functionality: fully functional, Equipment: type plate available, SHEARING MACHINE – MARIO RIBOLDI Nsdpfx Akozbck Tsmedc 2500 X 3/4 MODEL: CEM 253 USED MACHINE INTERNAL CODE: SVR 425

Condition: used, Year of construction: 2002, functionality: fully functional, Used Horizon VAC-100 4-Tower Collating System with ST-20 Configuration & Year of Manufacture  Horizon VAC-100: 2 towers — Year: 2002  Horizon VAC-100: 2 towers — Year: 2010  Horizon ST-20: 1 unit — Year: 2021 Nodoz Synuspfx Akmodc The system consists of four VAC-100 collating towers and one ST-20. The individual units were manufactured in different years, as listed above.

Condition: good (used), total length: 13,350 mm, total width: 2,550 mm, total height: 3,700 mm, Year of manufacture: 2012 Carrying capacity: 27.300 kg GVW: 12.700 kg Technical condition: good Visual appearance: good Production country: BE Please contact Christian Theißen for more information Nsdpfx Ajy H Du Sokmsdc Manufacturer: Euromax GTZ-3AUB Model: Multimax STN-4UBX Year of build: 2012 Condition: Used Data: First registration: 02/2012 Total dimensions LxWxH: 13,35 x 2,55 x 3,70 m Empty weight: 12.700 kg Total permissible weight: 40.000 kg Payload: 27.300 kg Number of axles: 3 Special features: Extendable by 3m (16.35m), forced-steering trailing axle, hydraulic lifting bed to gooseneck Location: Essen immediately available

Year of construction: 2021, condition: excellent (used), Wood dryer by Italian company BIGonDRY 3 chambers - each: - width 9.6 m - length 7.5 m - gate height 4 m Input of one about 100 m3 - total 300 m3 Njdpfxjvkxmfo Akmsdc Dryers used only for tests - practically new. Complete with full documentation, automation, laptop and internet connection (remote control).

Condition: used, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2011, Model year * Model year: 2011 Other dimensions and weights * Payload: 28,200 kg * Permissible total weight: 35,000 kg Njdpfxjyy Euts Akmjdc ----Vehicle location: Noris Truck Center GmbH, 90518 Altdorf near Nuremberg Errors and changes reserved

Condition: excellent (used), Year of construction: 2017, Technical specifications: Working width: 6500 mm Max. bending capacity: 4.0 mm Max. bending allowance: 3.0 mm CNC control Diameter of top roller: 420 mm Diameter of side rollers: 300 mm Diameter of center bottom roller: 400 mm Conical bending unit through angled positioning of the two side rollers Mobile control panel with digital display Hydraulic folding bearings CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Njdpfx Ajzfvvvekmsdc Weight: approx. 29 tons Optional equipment: Second top roller diameter: 350 mm Side bending aid Condition: Very good condition, little used.

Condition: excellent (used), Year of manufacture: 2026 Ndjdpfszdiziex Akmoc Carrying capacity: 38.370 kg GVW: 11.130 kg Technical condition: very good Visual appearance: very good Please contact Christian Theißen for more information Manufacturer: Faymonville Model: Multimax Plus Year of build: 2026 Condition: New Data: Equipment: BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle steerable. 3rd axle with electro-magnetic reverse lock via reverse gear and manually activatable. Technical axle load: 12,000 kg. Single-coat sand coating on the cover plates of the gooseneck as well as in the transition areas between the neck and the lifting bed, between the lifting bed and the loading surface, and between the loading surface and ramps. 1 spare wheel with mounting adapter under the loading surface on the right in front of the axles. Cutouts in the outer frame of the loading surface and the lifting bed for hooking in tension straps (LC 2,000 daN). Total dimensions LxWxH: 9,60 x 2,54 m Number of axles: 3 Payload: 38.370 kg Empty weight: +/- 11.130 kg Total permissible weight: 49.500 kg Information: sample images Information: Location: Essen immediately available.

Condition: used, empty load weight: 6,800 kg, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2011, color: red, gearing type: mechanical, Unladen weight: 6800kg, permissible total weight: 35000kg, Vehicle location: Noris Truck Center GmbH, 90518 Altdorf near Nuremberg. Errors and changes excepted. Njdpoyy D U Sjfx Akmedc

Condition: used, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2017, * SAF axles * Wheel recesses * Hydraulically adjustable loading ramps (width) * Air suspension * Extendable Ndodpfx Aewta Aljkmoc * Tare weight: 11,020 kg -----Internal vehicle number: 11010----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp – German, English – WhatsApp – German, English, Arabic.

Condition: used, Year of construction: 2022, operating hours: 837 h, JCB 16C-1 mini excavator, model year 2022, with only 837 operating hours! ----* Manufacturer: JCB * Type: 16C-1 * Model Year: 2022 * Operating hours: approx. 837 * Last service at approx. 806 hours / July 28, 2026 * Adjustable undercarriage * Includes 3 buckets * Power: 12.2 kW * Perkins diesel engine * Operating weight: 1,639 kg * More photos and video available upon request (WhatsApp Erik -->) Ndsde Ad Trcopfx Akmec * Price: 12,900 euros, net + 19% VAT. ----For further questions, please call: Erik Kortum: // WhatsApp ?All information without guarantee, errors and prior sale excepted.

Condition: used, Year of construction: 2003, Planer Rollers no. 17 Diameter 42 Nedpjzy Urlsfx Akmodc Belt width 2,000 mm. Minimum thickness 0.5 mm. Maximum thickness 3 mm.

Condition: excellent (used), Technical Data: Working length: 3100 mm Distance between uprights: 2560 mm Pressing force: 220 t CNC control: OPERATOR II grafic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Bending simulation automatic crowning motorized adjustable backgauge Throat depth: 650 mm Stroke: 200 mm Working height: 960 mm Laser safety system: FIESSLER Motor power: 17 kW CE marking Dimensions (LxWxH): approx. 3700 x 2400 x 2900 mm Weight: approx. 15 tons Accessories: 1 set of tooling: Ndsdpfx Aoyzm Nhokmsc 1 upper tool 120 mm 1 lower tool, segmented die: V 50, 35, 22, 16 Condition: Very good condition, complete overhaul in 2026 The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are age-appropriate; used machines are sold without any warranty.

Condition: used, Year of construction: 2022, operating hours: 984 h, JCB 8008 CTS mini excavator, manufactured in 2022, with only 984 operating hours! ----* Manufacturer: JCB * Model: 8008 CTS * Year of manufacture: 2022 * Operating hours: approx. 984 * Operating weight: 950 kg * Includes: 3 buckets * Extendable undercarriage * Good condition * Video available upon request (WhatsApp Erik) * Price: 9,500 Euros, net + 19% VAT Ndsdpfo Ad Tqxox Akmoc ----For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee, errors and prior sale excepted.

Condition: new, maximum load weight: 92,045 kg, overall weight: 1,26,000 kg, axle configuration: > 3 axles, Equipment: ABS, Excerpt from the equipment list Complete equipment upon request * 1 x Gooseneck MAX710-Neck-V-30-2.70 * Gooseneck with hydraulic lifting/lowering and extendable function Nodozzhfnjpfx Akmedc * Length approx. 3,650 mm. For SZM 6x4 or 8x4 * Steel front panel, approx. 400 mm high * Plug-in aluminum side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Incl. gantry for suspending the supply lines * The SZM tank must contain at least 80 l with MAX trailer couplings, otherwise the customer must provide the couplings ex works * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * TPMS tire pressure monitoring system * Two toolboxes INOX, approx. 855 x 340 x 390 mm, on the gooseneck, left and right (± 48 kg) * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Hydraulic connection lines between the power pack and the connection plate on the gooseneck * Radio remote control: operation of the power pack, start/stop of the diesel engine * Operation of the trailing axle, in addition to the cable remote control * with 2 LED indicator lights on the receiver for single-lane operation * Operation of raising/lowering the gooseneck * Operation of raising/lowering the suspension of the axle assemblies * Multicoupling hydraulic connections on the gooseneck * 1 LED work light, left and right, on the rear panel of the gooseneck, with separate on/off switch * Four warning boards, extendable by ± 2,000 mm, approx. 423 x 423 mm, with an LED position light and a mounting for a rotating beacon. (± 122 kg) * 1 x 3-axle compact front axle * MAX710 axle PA-F-3-19.5-1.36-2.85 * Hook connection at the front and rear * Length: approx. 3,560 mm * Axle width: approx. 2,850 mm * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication system for a 3-axle axle assembly with standard grease NLGI-2. * A 7-pole socket, left and right, at the rear of the front axle for the warning boards * TPMS tire pressure monitoring system according to ECE R 1411 * LED work lights, left and right, at the rear of the front axle with a separate on/off switch * Surface of the front axle with a sand-coated paint finish for slip resistance * Multicoupling hydraulic connections on the front axle * 1 x Low loader bridge: MAX710-Low-loader-BB-A-7.15-(430)-2.85 * Telescopic low loader bridge BB-A with drivable bridge hooks at the front and a bolt-on coupling at the rear * Basic width: approx. 2,850 mm Length: approx. 7,150 mm * Beam height: approx. 430 mm Beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm * 6 pairs of steel chequered plate with rubber matting approx. 1,000 mm, 1 pair approx. 500 mm (± 1,660 kg) * Possibility to screw in (ø approx. 40 mm) every approx. 500 mm on the outside of the top chord of the outer tube of the low loader bridge for screw rings (LC 16,000 daN) * Possibility to screw in M30 every approx. 1,000 - 1,200 mm on the outside of the inner tube of the low loader bridge for mounting screw rings (LC 10,000 daN) * Folding widening extensions with steel chequered plate, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * TPMS tire pressure monitoring system * Pair of loose HeProLen plastic wheel chocks with climbing strips approx. 1,200 x 450 x 50/400 mm. (± 130 kg) * 2 pairs of screwable lashing rings M30 (LC 12,000 daN). (± 13 kg) * Ce

Condition: used, Year of construction: 2017, operating hours: 3,139 h, Yanmar SV22 mini excavator, manufactured in 2017, comes with 3 buckets! Ndjdpfxe Abvgqo Akmec ----* Manufacturer: Yanmar * Model: SV22 * Year of manufacture: 2017 * Displayed operating hours: approx. * Operating weight: 2,275 kg * Includes 3 buckets * Mechanical quick coupler * CE declaration available * First owner * Additional photos and video available upon request (WhatsApp Erik) * Price: €15,900, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information is subject to change without notice, and errors and prior sale are reserved.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: P773, stroke length: 165 mm, throat depth: 255 mm, operating speed: 250 mm/s, reverse speed: 160 mm/s, oil tank capacity: 90 l, overall weight: 3,800 kg, power: 3 kW (4.08 HP), input voltage: 400 V, pressing force: 30 t, clearance between the columns: 850 mm, distance table to ram: 350 mm, table length: 1,020 mm, Equipment: CE marking, documentation/manual, safety light barrier, Fast, efficient, and quiet! Ideal for small parts! The single-cylinder Quality Press Brake, or EQPB for short, is the smallest model in the Placke press brake series. It is a very fast, robust, and quiet machine that has been specifically developed for the production of small parts. All manufacturing processes, from the hydraulic cylinder to the control cabinet construction, take place in-house. Through the use of state-of-the-art technology, combined with many years of experience in the field of forming technology, the EQPB series enables you to bend at a high level. Even the standard basic version is a fully functional press brake. Thanks to this combination of safety, reliability, and efficiency, coupled with uncomplicated operation, we can meet the highest demands and precision in the bending process. Press force: 300 kN (30 t) Working length: 1,020 mm Throat between uprights: 850 mm Installation height: 350 mm Overhang: 255 mm Ram stroke: 165 mm Height of lower bed above floor: 947 mm Rapid traverse max.: 250 mm/s Pressing speed max.: 9.8 mm/s Return speed max.: 160 mm/s Positioning accuracy of ram: ± 0.01 mm Motor power: 3.0 kW Hydraulic oil tank capacity: 90 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 3.8 t Njdpfez Hnudsx Akmedc Description: > Machine body Steel S 355 N, FEM-based design Torsionally rigid welded construction, floor-standing 2-component structural paint, RAL 7004 / 7016 > Hydraulics & Upper beam Proportional control valve Low-noise internal gear pump Roller guide, Heidenhain scale > Tooling Top: WILA hydraulic, NSCL-II-HC Bottom: narrow table, single V-shape (13 × 20) Y1/Y2 correction, sitting or standing > Rear back gauge CNC X-axis 950 mm, 800 mm/s, ± 0.01 mm R-axis 215 mm, 150 mm/s, ± 0.01 mm Z-axis manual, 2 stop fingers > Control system Delem DA 66S 24″ touchscreen on swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety & Efficiency CE-compliant, Pilz safety PLC TFS laser light curtain, moving with the ram eco-MODE start-stop automatic

Year of construction: 1996, condition: good (used), functionality: fully functional, GALLUS T 180 SCREEN AND LETTERPRESS LABEL PRINTING MACHINE WITH HOT-FOIL STAMPING, EMBOSSING, AND FLATBED DIE-CUTTING We are pleased to offer the following versatile GALLUS T 180, designed for the production and finishing of high-quality narrow-web labels. The machine combines three screen-printing units with one letterpress printing unit, UV curing, hot-foil stamping, embossing, and flatbed die-cutting. Thanks to the integrated unwinding and rewinding system, finished rolls can be produced directly within the machine in one complete production process. _____ MACHINE DETAILS Manufacturer: Gallus Model: T 180 Year of manufacture: 1996 Web width: 180 mm Printing processes: Screen printing and letterpress printing Printing units: 3 screen-printing units and 1 letterpress unit Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 3 screen-printing units • 1 letterpress printing unit • Suitable for high-opacity inks, solid colors, and detailed print applications • Combination of screen and letterpress printing within one production line Drying System • UV curing system • Immediate curing of inks and varnishes • Suitable for direct inline finishing and further processing Varnishing • Varnishing capability within the letterpress printing unit • Suitable for protective and decorative varnish applications • Inline finishing without the need for an additional standalone varnishing machine Decorative Finishing Nedoztqp Topfx Akmedc • Hot-foil stamping unit • Embossing capability • Suitable for metallic, decorative, and tactile finishing effects • Particularly attractive for premium and specialty label applications Web Handling • Unwinding unit • Rewinding unit • Controlled material transport throughout the complete production process • Finished rolls can be produced directly in the machine Die-Cutting • Flatbed die-cutting unit • Suitable for precise die-cutting of different label shapes and materials • Inline production from raw material to finished rolls _____