Used Filtrox Ag Cross Flow Microfiltration Unit for sale (41,397)

Year of construction: 1991, condition: used, The Filtrox Cross Flow microfilter works with a permissible transmembrane pressure of 6 bar (0 °C - 95 °C) and a filtrate volume of 4.5 - 7 hl/h with a filter surface area of 26.4 m². Two pumps (20 kW) in the unfiltrate circuit transport the medium to be filtered. With 16 hl agitator tank as cleaning tank. Additional title: yeast-beer recovery Capacity: 7 hl/h Hsdjvcq Daepfx Alwsu Tol. operating pressure: 10 bar Tol. operating temperature: 85 °C Max. filter area: 26 m^2 Current: 4,85/2,8 A Voltage: 220/380 V Frequency: 50 Hz Operation / Control: Simatic S5 Features: 8 ceramic membrane modules (total filtration area 26.4 m2); high-pressure pump; 16 hl cleaning tank with agitator; various pipes, valves, measurement and control technology

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Professionally designed crossflow ultrafiltration membrane system, engineered, built, and fully instrumented by a membrane specialist. 12 membrane modules in 3 parallel stages of 4 modules each, active membrane area 2.16 m². PVDF ultrafiltration membranes, separation limit 100 kDa, in PVC module tubes. Membrane stages can be individually shut off. Designed for diafiltration and pure concentration. Hygienic centrifugal pump, approximately 11 m³/h at approximately 2.5 bar feed pressure, crossflow up to 2.5 m/s. Retentate-side pressure adjustment via automatic proportional valve, stainless steel heat exchanger for temperature control. Ideally operated in conjunction with two feed tanks. Hjdpozmapvofx Alwou Technical data: - Total membrane area: 2.16 m² (12 modules, 3 stages of 4) - Membrane type: PVDF-UF, separation limit 100 kDa; module tubes PVC, stages can be individually shut off - Circulation rate: approx. 11 m³/h at approx. 2.5 bar; crossflow up to 2.5 m/s - Permeate rate: 20–120 l/h·m² (depending on suspension/concentration) - Interfaces: Inlet/Outlet, each DN50 (DIN 11851) - Instrumentation: Flow rate (feed/permeate), pressure and temperature sensors, proportional valve, stainless steel heat exchanger - Commissioned in June 2023; well-maintained, operational condition, regularly CIP-cleaned (last cleaning on 02/02/2026) More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the client through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: used, This listing is for the Akta crossflow filtration system The unit is in full working condition and is ready for immediate use An ÄKTA Crossflow filtration system is a type of tangential flow filtration (TFF) system developed by Cytiva (formerly GE Healthcare). It's used primarily in bioprocessing and biotechnology applications to concentrate, diafilter, or clarify biological samples such as proteins, viruses, plasmids, and other biomolecule Core Functions: Concentration – Reducing the volume of a sample while retaining the target biomolecule. Diafiltration (Buffer Exchange) – Removing salts or changing the buffer environment by continuously adding a new buffer while removing permeate. Clarification – Removing particulates or cells from process fluids Key Components: Pump Modules: Typically peristaltic pumps that manage flow rates precisely. Filtration Cassettes: Hollow fiber or flat sheet membranes for ultrafiltration or microfiltration. Pressure Sensors: To monitor and control transmembrane pressure (TMP). Hjdpfexhf A Rjx Alwsu Conductivity/pH/UV Detectors: For in-line monitoring of the filtrate and retentate. Benefits: Automation reduces operator error and variability. Scalable design for seamless transition from lab to production. Precise control of filtration parameters (flow rate, pressure, volume). CIP (Clean-In-Place) capabilities for easy maintenance and compliance with GMP. Common Applications: Protein concentration and buffer exchange Viral vector purification Plasmid DNA purification Cell harvest and clarification

Condition: used, Year of construction: 2020, Overview The tangential filter was manufactured in 2020 by Spanish manufacturer Sefiltra. It can be visited anytime. The structure is made of AISI-304 stainless steel; it has four wheels and a handle for its wheels and a handle for its displacement. All pipes and accessories are made of AISI-316L, Stainless Steel AISI-316L. The system is operated from the SIEMENS KTP 900 color touch screen, which is located on the front of the electrical panel. Techn. Details Capacity: depending on beer type, recently 1,000 – 1,500 litres per hour Unitary filtration surface: 10 m² Two 0.5 micron hollow fiber membranes Dimensions (LxlXh): 1.800 x 950 x 2.300 mm Weight empty: 350 Kg Operating weight: 470 Kg Equipment 1 pc Centrifugal feed pump 3.0 kW 1 pc Recirculation centrifugal pump 4,0 kW 2 pc Diaphragm HF 6043 MF 05 (KDP3358) 1 pc Modulating valve 5 pcs Pneumatic valves 1 pc 100 L CIP tank 1 pc Angle filter 500 microns 3 pc Electromagnetic flowmeters 5 pc Pressure transmitters 1 pc Temperature transmitter 1 pc Level transmitter 1 pc Liquid detector 1 pc Electrical panel with Siemens S7-1200 programmable logic controller and touch screen Siemens 7" touch screen Hedpfx Aljqvvpajwou

Condition: used, Year of construction: 2024, Overview The dynamic beer filtration system 1VDCF-5-5 was manufactured in 2024 by the German company BECA. The filtration system is used to filter beer. Techn. Data Whole Plant Hodpfx Aexchy Ujlwou - Output: 5 hl/h - Filter surface area: 5 m² - Condition: as new - Weight empty: approx. 800kg (net) + 300 kg (el. cabinet) - Dimensions (L x W x H): 2300mm x 1300mm x 2200mm - Dimensions electrical cabinet: 1000mm x 800mm x 2000mm - Energy requirement: 4kW - Energy consumption: 0,7-1,0 kW/hl - Temperature increase: 5°C per minute due to ceramic plates - Operating pressure: 1-4,5 bar - Size of the pores: 200nm Features: - High quality beers immediately after start up - Higher dry content of the filtered yeast - Extremely low energy consumption - Low maintenance effort - Filtration at low pressure - No additional tools or additives required - Modular design to increase the capacity in future - Integrated CIP system

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Hsdpfx Aozp H R Eolwou Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, Year of construction: 2003, Overview This PALL Microflow filtration system is designed for the crossflow filtration of beer, enabling continuous and fully automated clarification processes. The system is configured as a tandem installation with a capacity of up to 50 hl/h, suitable for medium to high-capacity brewery operations. It operates with membrane filtration modules, allowing gentle product handling and stable filtration performance. The unit includes pumps, integrated CIP system, and Siemens-based automation, ensuring a high degree of process control and hygiene. Technical Specs  Hodpfx Ajy Etcpelwsu - Capacity: approx. 50 hl/h (tandem system, 24h operation) - Filtration type: Crossflow (microfiltration) - Number of modules: 48 - Operating temperature range: 0°C to 70°C - Equipment: Pumps, integrated CIP system, complete piping, control system - Control system: Siemens S7 with Siemens OP07 HMI - Automation level: Fully automatic Equipment  - Filtration modules (48 units) - Product pumps - Integrated CIP system - Complete piping system

Condition: used, Year of construction: 2021, Overview The tangential filter system was built in 2021 by the Spanish company sefiltra and used for the filtration of beer. The owner had purchased all the equipment to set up a microbrewery but then decided to shift the production of his beer to a bigger brewery, producing for him.  Techn. details  Filtration system is mounted on stainless steel frame with rollers  Control system: Siemens S7  4 filter cartridges  Recirculation pump CIP connection options Filters particles from 300 µm Hsdpfxel Hxnxs Alweu

Condition: ready for operation (used), Year of construction: 2005, An industrial Sartorius crossflow membrane filtration system is available. Membrane modules: 6, Membrane age: approx. 3.5 years, Filtration capacity range (white wine): 5000l-6000l/h, Machine dimensions X/Y/Z: approx. 2400mm/1300mm/2150mm. Documentation available. An on-site inspection is possible. Hsdpfxezmh Sxe Alwou

Condition: ready for operation (used), Year of construction: 2001, A customized industrial Sartorius crossflow membrane filtration system is available. Filtration process: tangential flow filtration, design: skid, contact points: steel, membrane housings: 5, filter housing volume: 17, max. operating temperature: 95°C, max. operating pressure: 6bar, connected load: 35kVA. The system has no prefilter. Documentation available. An on-site inspection is possible. Hodpfx Alozlt Ngjwju

Condition: ready for operation (used), Year of construction: 2000, A customized industrial Sartorius crossflow membrane filtration system is available. Filtration process: tangential flow filtration, design: skid, construction: stainless steel, nominal capacity: 4000l/h, membrane modules: 24, membrane area: 12.5m²/module, total membrane area: approx. 300m², pore size: 0.2µm, max. operating temperature: 95°C, operating pressure: 3bar, connected load: 35kVA, control system: Siemens SIMATIC S7-300. The pneumatic valve islands were replaced in 2023. Documentation available. An on-site inspection is possible. Hsdpjzlt Nmefx Alwou

Condition: used, Year of construction: 1999, machine/vehicle number: P6414/ 700285, Very good condition. Filterelements should be replaced. Hodpoz Af Ngofx Alweu

Condition: used, functionality: fully functional, Year of construction: 2021, !! Short delivery time, we are happy to advise you !! A simple flow pack machine suitable for packaging various products. You have the option to inspect it locally before making a purchase decision. 3 units available Used. Thermal transfer printer available as an option: €1,900 Hedpfxeu T N Ume Alweu

Condition: used, angle steel/side length / mm double T-iron on the x-axis / mm U-iron on the x-axis / mm Hjdszu A Uqjpfx Alwou

Condition: as good as new (ex-display), Year of construction: 2023, Briefly stated: Base axis (X): 1.3-2 mm Outrigger (Y): 1.3-4 mm Accuracy: 0.06 mm Technical data Linear axis accuracy: ± 0.1 mm/m Hsdshw Nfqopfx Alwou Maximum travel speed: 10 m/min Acceleration: 0.02 g Repeatability: ± 0.06 mm Circular accuracy: ± 0.1 mm Z-axis stroke: 180 mm Base axis (X): 1.3 m, 3 m, 4 m Outrigger (Y): 1.3 m, 2 m Equipment and accessories Maintenance packages UltraPierce1 drilling guide Splash guard1 FlowTexturing (FTT) Abrasive slurry system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Deionized water conversion kit * Required for FlowTexturing

Condition: used, Year of construction: 1990, Additional title: beer filtration Filter capacity: 100 hl/h Filter area: 20 m² Perm. operating pressure: 6 bar Perm. operating temperature: 100 °C Voltage: 380 V Frequency: 50 Hz Hjdsvcq D Hepfx Alwju Weight: 2020 kg Features: 32 filter elements (30 x main filtration, 2 x residual filtration), 14 clamp screws (type: M20-L-8)

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 Waterjet Cutting System for Sale For sale is a very well-maintained Flow Mach 200 waterjet cutting system, manufactured in 2021, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single and small series production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive manual desliming system – EKOWA cutting water treatment – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available Hsdpfx Aljy Urziswou – Operator training provided – Well-maintained overall condition – Ready for immediate use Asking price: €105,000 net Inspection possible by appointment. Further pictures and information are available upon request.

Year of construction: 1983, condition: good (used), strip width 1.600 mm Hedpfxebidg Ee Alwou strip thickness 0,3 - 3 mm reference material (tensile strength) 420 N/mm² speed 68 m/min. at 6.000 mm plate length 23 m/min. at 400 mm plate length

Condition: new, functionality: fully functional, Year of construction: 2023, - In stock, unit is available! - The Rotection flowpack machine is suitable for packaging various products. A large operating display (HMI) ensures easy access to necessary data, such as tubular bag length. Model designation: Rotection tubular bag machine Operating display: 6.8" display Drives: Servo Packing length: 40-400mm Packaging width: 35-160 mm (depending on film width) Packing height: dependent on form shoulder Speed: 80-100 bags/min. in continuous operation Speed: up to 70 bags/min. Intermittently Film width: 90-400 mm Power consumption: 5 KW Power supply: 220-240 V / 50 Hz / 1-phase System weight: approx. 400 kg System dimensions: approx. 4000 x 930 x 1370 mm Error rate: < 5% *The above information refers to the model: RMFP70. This is a horizontal packaging machine. In the picture gallery you will find various models from our range of systems. Of course we offer you state of the art Box-Motion tubular bag systems. In order to be able to offer you the right packaging system for your requirements, our engineers are available to advise you. Hedpfxoinwi Hj Alwsu Of course, we will supply you with suitable mounting frames for the use of thermal transfer printers, or we will be happy to offer you a suitable system. We would be happy to carry out a test with your product in advance in order to offer you the right form shoulder and to be able to make a statement on the performance.

Condition: new, functionality: fully functional, Year of construction: 2026, ! Short delivery time, under 10 weeks! Model designation: Impuls Packaging Box-Motion BF Production orientation: Horizontal Conveying system: Chain conveyor belt or infeed belt Film feed: From below Forming shoulder: Flexible and fixed Operator display: 10" touchscreen with memory functions, pivotable via outrigger arm for comfortable operator handling Drives & control: 9 servo motors and PLC control Package length: 120-600 mm Package width: Max. 350 mm (depending on film width) Package height: Max. 150 mm (depending on forming shoulder) Speed: 10-60 bags/min. Film width: Up to 900 mm, depending on model Machine weight: Approx. 900-1500 kg Machine material: 304 stainless steel Registration mark sensor: Yes External compressed air required: Yes Printer mount: Available at extra cost Delivery time: Current delivery time under 10 weeks Hjdjq Ikgyjpfx Alwju Features: • Box-motion end sealing • Manual reel fixation without compressed air • Automatic reel centering for precise application • Automatic stop with empty products (no product – no bag) • Easy touch screen operation via color icons • Continuous product feed through sensor-based control • Registration mark sensor included • Safety protection covers • 3-sided seam packaging (fin seal) + longitudinal seal • Can be combined with upstream and downstream machines • Customer-specific modifications/designs on request Additional options (on request and at extra cost): • Thermal transfer printer, e. g. for best-before dates, print width up to 60 mm • Euro hole punch, etc. • Gas flushing units for modified atmosphere packaging (extends product shelf life) • Automatic product infeed systems, intermittent push-in systems • Length-dependent product processing via photoelectric sensors

Year of construction: 2006, condition: ready for operation (used), A Flow Europe CNC waterjet cutting system is available. Working dimensions X/Y: 3600mm/2000mm, continuous operating pressure: 3800bar, pump type: Flow HyPlex 50, operating hours: 4342, major pump maintenance at: 4102h, control system: Flow Master-PC, module version Path/Cut/FlowNest: 6.0. Including clamping and fixturing device, Flow setup and positioning aids with laser pointer, light barriers, sand silo, Flow mixing unit, water softening system, new pump maintenance kit, various spare parts, and all piping and cables. The collision sensor has a defect. Documentation vorhanden. An on-site inspection is possible. Hsdpfx Alezka Imewou

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) Hjdezimcbspfx Alwsu (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: M5427F3D01, Flow MACH 500 4020 DWJ Waterjet Cutting Machine Manufacturer: Flow Model: MACH 500 4020 DWJ Hjdpfx Alozhkmusweu Year of Manufacture: 2017 Technical Specifications Working area: 4,000 × 2,000 mm Dynamic Waterjet (DWJ) taper compensation cutting head UltraJet 60,000 PSI intensifier pump Abrasive waterjet cutting system Abrasive sludge extraction system Approx. 26,000 operating hours 380–480 V, 50/60 Hz, 3 Phase CE marked Machine Description A well-maintained Flow MACH 500 4020 Dynamic Waterjet cutting system in good working order. The machine is currently installed and can be inspected under power. The Dynamic Waterjet head provides automatic taper compensation, producing highly accurate components with excellent edge quality while reducing secondary finishing operations. Suitable for cutting a wide range of materials including: Stainless Steel Mild Steel Aluminium Titanium Copper & Brass Plastics Composites Glass Stone Ceramics The machine is fitted with an UltraJet 60K intensifier pump and an abrasive sludge extraction system, making it suitable for continuous production environments. Condition Regularly maintained throughout its working life Fully operational Demonstration available by appointment Service history available on request Included Flow MACH 500 4020 Waterjet System Dynamic Waterjet Cutting Head UltraJet 60K Intensifier Pump Abrasive Delivery System Abrasive Sludge Extraction System Location: Ireland Price: On Request The machine is available immediately. Further photographs, videos, maintenance information and machine demonstrations can be provided upon request.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber Hedpfx Aozvcknjlwou • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Hsdpfx Aeyz Dhzelwou Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible