Used Fliegl Zhks 350 - 25 M³ for sale (79,363)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,750 kg, maximum load weight: 30,250 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. More information Chassis, semi-trailer, tipper Fine-grained steel welded construction, in basic lightweight design, turntable with interchangeable 2 kingpin Curved front end, patented 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation Underrun protection, foldable Half-shell mudguards Towing hook at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only for basic tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side coupled with the turn signal "Flashing side lights" 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a swing gate with double hinge, externally mounted with double hook locking. 2 clamping screws with lever locks on the side below. Side walls continuous, 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with ladder, connection plate for air/electricity and brake with large space for best possible operation. Roll cover on one side for stowing on the right, with central locking on the left Country of registration/signs Germany With Dekra approval and certificate (according to §13 EG - FGV) Superstructure strength according to EN 12642 24/7 service hotline Knjdpfx Asi Ri Nfeklsa Prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rust-through Support feet, black coated Body RAL, single color Roll cover RAL, single color Available in thermally insulated design!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902037031, empty load weight: 4,795 kg, maximum load weight: 30,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2025, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,040 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: grey, These images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, in basic lightweight design, kingpin plate with replaceable 2" kingpin, Curved front end "Patented" 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Support wedges with holder Underrun protection, foldable Half-shell fenders Knodpfoy Rrplsx Aklsa Integrated "fender holder," surface resistant to stone chipping with anti-splash flaps only on the last axle Tarpaulin rod with holder Towing hook at the rear (not on Revolution model) Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance, activated by "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Automatic tilting lowering with shut-off valve "TPMS" tire pressure monitoring system - display on the tractor unit, via EBS, without truck installation (the truck must have the necessary prerequisites. Only on base tires). Wheels and tires 385/65 R22.5" Steel rims Electrical system 24 volts, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED (Note! with certain tractor units, false diagnoses may occur, although the function is given) Yellow LED lighting on the sides linked to the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connecting cable Additional LED work light, integrated and recessed at the rear, switched via reversing light Hydraulics Low-pressure cylinder max. 170 bar Operation hydraulically via truck auxiliary drive Bins Aluminum box body made of high-quality, abrasion-resistant material. Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents spillage. Inside with access ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Greenline - conical and aerodynamic bin shape "Membrane" - rear wall Rear wall as a hinged flap with "double-hinge hinge," externally mounted with double hook lock. Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access ladder, connecting plate for air/electrical and brake connections with large clearance for optimal operability. Roll tarp, can be folded to the right side, with central locking on the left side Operating instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod, so that it is not attacked and rusted by the material.

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 3,950 kg, maximum load weight: 31,050 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,930 mm, suspension: air, tire size: 385/65r22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. More information: Chassis Fine-grained steel welded construction, lightweight design, kingpin plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, cannot be uncoupled with load, in the uncoupled state, the vehicle must stand at an angle towards the rear. 2 chock blocks + holder Underrun protection, foldable Semi-shell fenders Integrated fender holder, surface repels stones with anti-splash flaps on the last axle 1 tarpaulin rod + holder 2 towing hooks at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle automatic lift axle, incl. forced lowering and start-up assist, operated 3x by braking (start-up assist functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Attention: Trailer may only be pulled by towing vehicles that guarantee the effectiveness of ABS! with lifting and lowering valve Vehicle driving stability system Automatic tilting lowering with shut-off valve Wheels & tires 385/65R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw fitting, fixed part NW 48 mm. Actuation via truck auxiliary drive Ksdpfx Aksi Ri R Iolona Tipping body Aluminum box body, sloping front wall 5 mm thick, 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents bulk material from spilling. Inside with ladder on the front wall. Shovel and broom holder on the outside of the front wall. Greenline - conical and aerodynamic tipping body shape Membrane - rear wall Rear wall as a hinged flap with double hinge, externally mounted with a double hook lock. Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with ladder, connecting plate for air/electricity and brake with large clearance for best possible operation. Roller cover on one side for storage on the right, with central locking on the left. Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod, so that it is not attacked by the material and does not rust. The stated total weight is technically possible, but depending on the load, the total weight may not be reached while observing the permissible axle/support and kingpin loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of approval/signage Germany Type approval according to EC 2007/46 24/7 service hotline prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the sides and red at the

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,980 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space width: 2,420 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,240 mm, suspension: air, tire size: 385/65 r22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis Fine-grained steel welded construction, lightweight design, kingpin plate with 2 interchangeable kingpins Curved front end, patented without support leg Wheel chocks + holder Underrun protection, foldable Semi-shell fenders integrated fender holder, surface resistant to stone chipping Towing hook at the rear Axles + Suspension SAF disc brake axles Axle/chassis laser-measured to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, incl. forced lowering and starting assist, actuated by 3x brakes (starting assist functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 tamper-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable with lifting and lowering valve Vehicle driving stability system Wheels & tires 385/65 R22.5, manufacturer's choice Polished aluminum rim, manufacturer's choice Electrical system Ksdpfx Aei Ri H Ssklsna 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin socket at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw connection, fixed part, NW 48 mm. Actuation via hydraulic system connected to the truck's auxiliary drive Tippers Sloping front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, neatly welded, with upper edge profile to prevent material spillage. Inside with a ladder on the front wall Shovel and broom holder on the outside of the front wall Greenline - conical and aerodynamic tipper body shape Membrane - rear wall Rear wall as a hinged flap with double-joint hinge, externally supported with a double hook lock. Rear wall with rubber seal Note! Heat resistant up to max. 170°C! Floor continuously 5 mm thick, Brinell 110 Note! Only for the transport of sand, gravel and rolled gravel with max. grain size up to 20 mm! All other transport goods are excluded from the warranty! Standing platform with ladder, connection plate for air/electric and brake with large clearance for best possible operation. Rollover tarpaulin, one-sided for laying down on the right-hand side, with central locking on the left-hand side Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod to protect against rust The specified total weight is technically possible, depending on the cargo, the total weight may not be reached while observing the permissible axle/support and saddle loads. (Poor driving and handling behavior due to incorrect load distribution possible) Country of approval/ Signage Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau Tipper body R

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,350 kg, maximum load weight: 33,650 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,650 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information: Chassis, semi-trailer tipper Fine-grained steel welded construction, in basic lightweight design, trailer plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, uncoupling with load is not possible; when uncoupled, the vehicle must be tilted backwards. Wedge blocks with holder Rear underrun protection, foldable Half-shell fenders Integrated fender holder, surface repels stones Tarpaulin rod with holder Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display on the towing vehicle's display, via EBS, without installation in the truck (this must be available in the truck). Only on standard tires. Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides linked to the turn signal ("flashing side lights") 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinders with access ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a hinged flap with double-hinge hinge, externally mounted with double hook lock. 2 clamping screws with lever locks on the lower side. Side walls continuous, 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with access ladder, connection plate for air/electricity and brake with large clearance for best possible operation. Roller cover on one side for placement on the right side, with central locking on the left side Country of registration / signs Germany Type approval according to EC 2007/46 Superstructure strength according to EN 12642 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust-through" Support legs galvanized Body RAL desired color, solid color Roller cover RAL 7035 light gray Kedpfx Asi Ri Dpekljna

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902032084, empty load weight: 4,140 kg, maximum load weight: 33,860 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,240 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: white, 25 m³ Aluminium Tipper Body Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. --- ## Wheels * Alcoa Dura-Bright aluminium wheels --- ## Axles & Suspension * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid * Traction aid activated via “3x braking” * Function active up to 30% axle overload and max. 25 km/h * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust Kodpfswhfiyjx Aklsna --- ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 1 × 15-pin front socket (without connecting cable) * 2 integrated rear LED work lights, activated via reverse gear --- ## Hydraulic System * High-pressure tipping cylinder, max. 250 bar * Hard-chrome plated first stage * HDK screw coupling, fixed section, NW 48 mm (without hose connection) * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut * Cylinder transferred from the replaced vehicle --- ## Tipping Body – Aluminium Box Body (25 m³) * High-quality wear-resistant aluminium body construction * Sloped 5 mm front wall with external hydraulic cylinder mounting * Side walls made of 30 mm hollow chamber profiles, fully welded * Upper edge profile designed to prevent material build-up * Internal access ladder at front wall (not compatible with Cramaro system) * External shovel and broom holder on front wall * Aerodynamic tapered “Greenline” body design ### Tailgate * “Membrane” rear wall with double-joint hinge system * Externally mounted pendulum tailgate with double hook locking system * Rubber-sealed tailgate * Heat resistant up to max. 170°C ### Floor & Equipment * Continuous 6 mm steel floor * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction) * Central locking on left-hand side --- ## Paint / Finish * Aluminium natural finish (body) * Galvanised or coated components depending on specification --- Optional Note: The cylinder shown may originate from a previous vehicle and is reused depending on configuration.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33502014693, empty load weight: 6,300 kg, maximum load weight: 28,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r19,5, tire condition: 100 %, Further information: Fine-grained steel welded construction, drawbar with 2 replaceable kingpins, 14 pairs of lashing eyes recessed in the outer frame, each with a capacity of 2.5 tons, outer frame with Load-Lock profile for attaching lashing straps. Note: Not suitable for use with sideboards! 24-ton, two-stage support winch, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation. 2-stage extension ladder at the rear, door retainer on the side, chocks with holder, aluminum side impact protection, galvanized steel underrun protection, partial wheel arches in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, rear impact protection, spare wheel holder for 1 spare wheel, with wheel fastening kit, plastic toolbox. SAF disc brake axles, air suspension. 2-line compressed air braking system, spring brake parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable. Attention: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! With lift and lower valve, vehicle stability system, tire pressure monitoring system TPMS Haldex, in conjunction with the info center. 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole tamper-proof sockets at the front, without connecting cable, LED safelight, at the top in corner posts at the rear. Floor: Sieve-printed panels approx. 30 mm thick, cross members with omega inserts, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg. Front wall/corner posts at the front: 2,600 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection. Side rails: 5 pieces of sliding rails that can be moved along the entire length, with 4-fold insertion pockets and at the bottom with a long pocket (3 x on the right side and 2 x on the left side), 5 pieces of rail positions (3 x on the right side and 2 x on the left side), aluminum insertion strips. Corner posts at the rear: steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-wing with 2 internal rotary latch locks each. Tarpaulin with welded-in horizontal and vertical straps, reinforcements for side rails. Quick Lock system for side tarpaulin with central lock, on one side on the left, tensioning devices made of stainless steel on the right, tarpaulin with recessed vertical slats as a load securing tarpaulin, on one side on the left (then only 2 pairs of side rails on the left). Knedpfxokyrlzo Aklsa Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with the tarpaulin sliding from the back to the front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, liftable roof, mechanically liftable by approx. 380 mm, liftable roof for opening with the doors closed. Country of registration: Germany, type approval according to EG 2007/46, load securing certificate according to EN 12642 XL, 24/7 service hotline, prepared for single-line license plate holder, warning sign according to ECE - 70, refl

Condition: used, machine/vehicle number: WFDFLT33502019721, empty load weight: 6,927 kg, maximum load weight: 28,073 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: black, Attention: The pictures shown are archive images. The vehicle may still be in operation! Chassis Fine-grain steel welded chassis with lightweight design, equipped with a replaceable 2" kingpin. Slightly angled outer frame with Load-Lock profile for load strap attachment. Note: When sideboards are fitted, they must be opened before straps can be attached. Not usable in the gooseneck area. Additional 10 pairs of recessed lashing rings, each rated at 2.5 t. 24-tonne two-speed landing gear with single-side operation and straight foot, without compensating mechanism. Foldable front support legs, extendable and foldable outward in front of the headboard; positioned as far inward as possible during transport. Rear access ladder, side-mounted door retainers, wheel chocks with holders, aluminium side underrun protection, galvanized steel rear underrun protection, quarter fenders in front of the first axle and behind each axle, anti-spray mudflaps behind each axle, rear impact protection with Heavy Blocker cross beam, heavy-duty pallet stop on both sides (approx. 20–25 mm high) with lashing points every 200 mm. Loading height reduced by approx. 20–25 mm. Plastic toolbox. Axles & Suspension SAF disc brake axles with air suspension, without lift axle. Braking System Dual-line air brake system with spring parking brake. Two colour-coded coupling heads at the front without connecting lines. Electronic Braking System (EBS) with front EBS socket (without connecting cable). Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality. Equipped with raise/lower valve and Vehicle Stability System (RSS). Electrical System 24 V electrical system with multi-chamber lights, yellow LED side marker lights, two white LED front position lights, two red/white rear outline marker lights, and 2 × 7-pin plus 1 × 15-pin front sockets (without connecting cables). Floor Steel front floor section with anti-slip coating. Approx. 30 mm phenolic plywood floor, Omega-reinforced cross joints, longitudinal support beams for high point loading, suitable for forklift axle loads up to 7,100 kg. Steel chequer plate flooring in the wheel area. Front Wall Front bulkhead approx. 2,580 mm high with steel corner posts in volume design. Front curtain release mechanism. Internal steel impact protection up to approx. 140 mm height. Sliding Posts Three pairs of full-length sliding posts with four socket positions and extended lower pockets. Three post positions with aluminium side slats. Rear Frame Steel rear corner posts extending to roof level, curtain tensioning system with round tube and ratchet. Double rear portal doors with two internal locking rods per door. Curtain PVC curtain with welded horizontal and vertical reinforcement straps, stainless steel tension buckles, and customer branding on the rear portal. Roof Sliding roof with rear end-lift, opening from rear to front. L-roof beams suitable for automotive logistics. Internal roof width approx. 2,490 mm. White roof curtain. EcoLift lifting roof, adjustable by approx. 380 mm with gas strut assistance. Anti-Ice System with centrally positioned hose and automatic ventilation. Registration & Certification Knedpokyrlwjfx Aklja Approved for registration in Germany, type-approved according to EC Directive 2007/46. EN 12642 XL load securing certificate (valid only with four rows of aluminium side slats), additional DC 9.5 certificate

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: - Motor: 15 kW - 400 V - 3,000 rpm Kodpfx Akjzk N Upelsna - Extraction nozzle diameter: 250/300 mm - Dimensions: approx. 900 x 750 x 1000 mm - Weight: approx. 190 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: new, Rexroth M-3 SED 6 CK13/350 C G24 N9K73 L, seat valve, R901257167, unused, 100% functional, scope of delivery as shown in the photos. Kjdpoi Eczrsfx Aklsna

Condition: good (used), Technical data for the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in the scope of supply: 1x CS Sigma profile, used Material color: sendzimir galvanized Knedpsidchcefx Aklja Overall length: approx. 5,500 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Condition: good (used), Technical data for the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in the scope of supply: Knjdpfx Akjidchgoloa 1x CS Sigma profile, used Material color: sendzimir galvanized Overall length: approx. 5,600 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Condition: good (used), Technical data for the CS Sigma profile: Manufacturer: Stow Ksdpfx Akoidcg Aslona Type: MSNSBG 350/2.0 S 350 GD Included in the scope of delivery: 01x CS Sigma profile, used Material color: sendzimir zinc-coated Overall length: approx. 4,450 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Condition: excellent (used), For sale is a Rietschle CL 25 VE vacuum pump from the renowned German manufacturer, Rietschle. This unit is designed for creating a vacuum in machines, production lines, and vacuum gripper and table systems. The pump is equipped with an oil tank with a level indicator and an electric drive. Its robust construction guarantees a long service life and reliable operation. The visual condition matches the photos – it shows normal signs of use. Technical data: Manufacturer: Rietschle Model: CL 25 VE Serial number: 325202 Country of origin: West Germany Capacity: 25 m³/h Rotational speed: 1400 rpm Maximum vacuum: ≥ 90% Motor power: 1.1 kW (1.5 hp) Knsdpfx Akozi Hf Aslja Power supply: 380/220 V Frequency: 50 Hz Protection class: IP44 Insulation class: B Applications The pump is used in various applications, including: CNC machines, woodworking machines, packaging equipment, vacuum tables, vacuum grippers, vacuum conveying systems, laboratory equipment, production lines. Advantages: robust construction, German-made, high capacity of 25 m³/h, durable, oil-lubricated rotary vane pump, oil level indicator for easy operation monitoring, easy installation and connection.

Condition: like new (used), 25 linear meters of Nedcon pallet racking New item, see pictures! A top racking system from the renowned manufacturer NEDCON – a subsidiary of Voestalpine AG, with its headquarters in the Netherlands. Height: 3.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Load capacity per beam/level: 3050 kg Negotiable price: € 3,290 net ex warehouse The offer includes: + 10 pcs. pre-assembled frames, depth 110 cm, height 3.5 m + 36 pcs. beams, length 2.7 m, 3050 kg load capacity per level + 72 pcs. safety catches + 20 pcs. concrete anchors Load capacity signs, documentation, etc. are, of course, included. Further accessories can be found in the accessories catalog. Frames: blue RAL 5019, infill panels: galvanized. Heights from 2 m to 7 m in stock. Field load: 12 tons, higher field loads available upon request. Beams: orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. The goods are in stock. Transport and assembly are available upon request. Other configurations available upon request. Over 2000 linear meters available. Inspection possible at any time by appointment. Further information on request. We continuously have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse shelving to buy? With around 100 employees, Lenox Trading is one of the largest dealers in new and used warehouse technology throughout the DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of storage platforms & steel structure platforms immediately available • 30–50 semi-trailer truckloads of goods are processed weekly for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving units, tire racks or racks for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) Knsdpjfi U Aisfx Akloa • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS AREA: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a comprehensive all-round package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission auction: Conducting auctions on behalf of the client. Our full service through our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, KSB Centrifugal Pump ETANORM SYT ETNY065-040-200 NEW 2024 25.6 m3/h 46 m For sale: high-quality centrifugal pump from the renowned German manufacturer KSB, model ETANORM SYT ETNY065-040-200. The unit is brand new, unused warehouse stock, in original KSB packaging. Perfect for industrial applications in water installations as well as heating and cooling systems. TECHNICAL DATA Manufacturer: KSB Model: ETANORM SYT ETNY065-040-200 Capacity Q: 25.6 m³/h Head H: 46 m Rotational speed: 2,950 rpm Impeller diameter: 187 mm Casing material: EN GJS 400 15 Year of manufacture: 2024 Flange connections CONDITION New, unused, warehouse stock May have minimal storage marks Original KSB packaging APPLICATIONS Kodpfx Aeywu Uqjklona Industrial installations Water circulation pumps HVAC systems Heating and cooling installations Pumping stations

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902024934, empty load weight: 3,900 kg, maximum load weight: 31,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,040 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 90 %, color: white, Archive photos shown! Demonstration vehicle Additional Information Chassis Lightweight high-tensile steel welded tipping semi-trailer chassis with replaceable 2" kingpin. Frame without side supports for gearbox landing legs. Patented curved front design. Central telescopic support leg. Trailer cannot be uncoupled while loaded; when uncoupled, it must remain inclined to the rear. Wheel chocks with holders. Folding rear underrun protection. Half-shell mudguards with new mounting system and anti-spray flap on the rear axle. Tarp support bar with holder. Rear towing hook. Axles & Suspension SAF lightweight disc brake axles with 370 mm brake discs. Laser-aligned axle and suspension system for reduced tyre wear and fuel consumption. Switchable tipping stabilizer on the 3rd axle. Air suspension with air pressure gauge. Automatic first lift axle with traction aid, also electrically controlled from the tractor (no tractor installation required). Traction aid operates up to 30% axle overload and max. 25 km/h. Braking System Dual-line air brake system with colour-coded air lines for easy servicing. Spring parking brake. Front air couplings without connecting hoses. Electronic Braking System (EBS) with front socket. Trailer must only be operated with towing vehicles supporting ABS functionality. Raise/lower valve. Electronic Stability Program (ESP). Automatic lowering during tipping with shut-off valve. Wheels & Tyres 385/65 R22.5 Fulda tyres. Polished aluminium wheels. Electrical System 24 V LED lighting with resistors. LED side marker lights. LED number plate lighting. LED front position lights. LED rear marker lights. 15-pin front connector. Additional rear LED work light activated via reverse gear. Knedjzl E Egspfx Akloa Hydraulics Low-pressure tipping cylinder (max. 170 bar) with HDK screw coupling, DN 48 (without hose connection). Hydraulic operation via PTO. Hydraulic hose with HDK screw connector included. Body Lightweight aluminium box body made from high-quality, wear-resistant material. 5 mm sloping front wall with external cylinder mount. Side walls made of 30 mm hollow aluminium profiles with anti-spillage top rail. External shovel and broom holder. Internal front access ladder. Aerodynamic Greenline tapered body. Membrane tailgate with external double-hook locking system and rubber seal. Heat-resistant up to 170°C. One-piece 6 mm floor. Front platform with access ladder. Lightweight roll tarp opening to the right with central locking on the left. Operating Information For transporting salt, lime or similar materials, Fliegl recommends a tipping cylinder with a hard chrome-plated piston rod to prevent corrosion. The stated gross vehicle weight is technically achievable; however, depending on the load, the maximum permissible weight may be limited by legal axle, kingpin or support loads.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802030369, empty load weight: 31,110 kg, maximum load weight: 34,889 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 01/2027, total length: 7,390 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, # Fliegl Chemical Tank Container Chassis Please note: The images shown are archive photos. The vehicle may still be in operation. ## Chassis * High-strength fine-grain steel welded chassis * Fifth wheel with replaceable 2" kingpin * Container configuration: * 1 × centrally positioned 20 ft ISO tank container * Alternatively suitable for 7.15 m / 7.45 m swap bodies * Front container locks in fixed (non-recessed) position * Extended container locking twist locks * 24-tonne, two-speed landing gear with single-side operation, straight foot design, without load compensation * Wheel chocks with holders * Side underrun protection * Aluminium rear underrun protection * EC-compliant anti-spray mud flaps * Stainless steel spill containment tray with: * 1¼" drain pipe * 1¼" shut-off valve * Drip tray included * Perforated anti-slip walkways (approx. 400 mm wide) on both sides between spill tray and chassis rails * Hose storage system approx. 4,500 mm long (including hose compartment) for: * 2 × DN 200 hoses (outer positions) * 2 × DN 160 hoses (centre position) * Rear stainless steel hose box: * Approx. 300 mm deep * Splash-proof * Stainless steel lid with full rubber seal * Drain opening at the lowest point * Stainless steel grounding lug at the rear right-hand side of the chassis * International grounding identification label * Rear access steps on the right-hand side leading to the underrun protection * Additional anti-slip step on the right-hand main chassis rail (approx. 260 × 300 mm) ## Axles & Suspension * SAF disc brake axles * Laser wheel alignment for reduced tyre wear and fuel consumption * Offset axle spacing: 1,410 / 1,310 mm * Suitable for combined transport up to a gross combination weight of 44 tonnes * Air suspension * First axle with automatic lift axle * Automatic lowering function and traction aid * Lift axle activated by pressing the brake pedal three times * Traction aid operational up to 30% axle overload and speeds of up to 25 km/h ## Braking System * Dual-line compressed air braking system * Colour-coded air lines for simplified servicing * Spring parking brake * Non-interchangeable air couplings at the front (without connecting hoses) * Electronic Braking System (EBS) * Front EBS socket without connecting cable * Lift and lowering valve * Vehicle Stability Control System * Axle load monitoring via EBS CAN bus for display in the truck dashboard (truck preparation required) Note: The trailer may only be operated with towing vehicles capable of ensuring the correct functioning of the ABS system. ## Wheels & Tyres * 385/65 R22.5 tyres * Manufacturer's choice * Steel wheels, factory silver finish ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * Two white front position lights * Two red/white rear outline marker lights * 15-pin front connector (without connecting cable) # Approval & ADR Equipment * ECE R70 rear warning plate Kjdpoy Tvphefx Aklona * ADR approval in accordance with ADR 9.1.1.2 * Approved for EX/II and EX/III vehicles * ADR vehicle approval certificate for the transport of certain dangerous goods (formerly B3) * Rear warning plate included * Not approved for UN 0331 and UN 0332 explosives (Class B-E) * Contour markings in accordance with ECE R048: * White reflective markings on the sides * Yellow reflective markings at the rear

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Kodsi Rixkjpfx Aklsna Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: new, TECHNICAL DATA: - Footprint: 15,000 x 20,000 mm [other versions available] - Grid: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm [customizable] - Floor covering: 38 mm particle board, P6 grade, raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The mezzanines can be extended in the specified grid as standard. Other sizes and heights available upon request. Our team is happy to advise you! Kodpfxjxpic Ro Akljna Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: 25 m² | Area: 5,000 x 5,000 mm | €2,345.00 net, plus transport costs and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,135.00 net, plus transport costs and VAT 75 m² | Area: 5,000 x 15,000 mm | €5,835.00 net, plus transport costs and VAT 100 m² | Area: 5,000 x 20,000 mm | €7,645.00 net, plus transport costs and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,555.00 net, plus transport costs and VAT 150 m² | Area: 10,000 x 15,000 mm | €10,985.00 net, plus transport costs and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,175.00 net, plus transport costs and VAT 300 m² | Area: 15,000 x 15,000 mm | €20,515.00 net, plus transport costs and VAT 400 m² | Area: 20,000 x 20,000 mm | €26,675.00 net, plus transport costs and VAT 500 m² | Area: 20,000 x 25,000 mm | €30,035.00 net, plus transport costs and VAT Further versions available. Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal struts instead of bracing crosses, at extra cost YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an extra charge. The additional costs depend on the place of delivery and shipping volume and can be quoted individually on request. TERMS OF PAYMENT Terms of payment must be agreed upon in the event of an order. The price is per unit/net price or as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used items from various manufacturers/brands at attractive conditions. Please do not hesitate to contact us if you have any questions. 'Vier gewinnt' – The four success modules of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 10,000 x 24,000 mm [other configurations available] - Grid pattern: 5,000 x 6,000 mm - Finished floor height: 3,340 mm Ksdpfexpizasx Aklsna - Clear height: 3,000 mm - Flooring: 38 mm raw/white chipboard, P6 quality - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The mezzanine platforms are expandable in the specified grid as standard. Other sizes and heights available upon request. Our team will be pleased to advise you! Delivery scope: - Columns - Primary and secondary beams - Cross bracing - Flooring - Fastening material Sample prices: 30 m² | Dimensions: 5,000 x 6,000 mm | €2,685.00 net, excl. shipping and VAT 60 m² | Dimensions: 5,000 x 12,000 mm | €4,785.00 net, excl. shipping and VAT 90 m² | Dimensions: 5,000 x 18,000 mm | €6,855.00 net, excl. shipping and VAT 120 m² | Dimensions: 5,000 x 24,000 mm | €8,955.00 net, excl. shipping and VAT 60 m² | Dimensions: 10,000 x 6,000 mm | €4,785.00 net, excl. shipping and VAT 120 m² | Dimensions: 10,000 x 12,000 mm | €8,645.00 net, excl. shipping and VAT 180 m² | Dimensions: 10,000 x 18,000 mm | €12,495.00 net, excl. shipping and VAT 240 m² | Dimensions: 10,000 x 24,000 mm | €16,335.00 net, excl. shipping and VAT Further versions available. Please contact us for more information. Optional accessories: - Guard railing - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal braces instead of cross bracing available at extra cost YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MADE-TO-MEASURE MANUFACTURING This mezzanine platform represents an example from our standard range. Of course, we develop and manufacture your storage platform precisely according to your business requirements—tailored to surface area, load-bearing capacity, installation height, and intended application. Our planning department will prepare a customized, non-binding offer tailored to your specifications. Whether new construction, expansion, or modernization of existing systems—we support you with extensive expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation. This item is available for pick-up. Delivery or shipping is available at additional cost. Additional charges are based on the delivery location and the volume of the shipment and can be requested individually from us. PAYMENT TERMS Payment conditions will be agreed upon in the event of an order. The quoted price is the unit/net price, or as stated in the description (plus VAT). You will of course receive an invoice indicating VAT. ABOUT US DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveying technology, mezzanine platforms, textile racking, as well as machinery for trade, industry, and the trades. We continuously offer attractive used equipment from a variety of manufacturers/brands on favorable terms. If you have any questions, feel free to contact us. ✅ Four wins—the success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: ready for operation (used), Brinkmann TC 25 / 810+100 submersible pump, serial number: 0313002815-19535001, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Knedpfxei D Hmhs Aklja

Condition: used, mileage: 85,900 km, power: 92 kW (125.09 HP), first registration: 01/2012, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2028, color: white, gearing type: mechanical, emission class: euro5, loading space length: 3,250 mm, loading space width: 2,130 mm, loading space height: 400 mm, Equipment: ABS, central locking, soot filter, Transit FT 350 2.2L Diesel, 125 hp. Aluminum sideboards with protective grille, cargo dimensions: 3.25 x 2.13 x 0.40 m. Wheelbase 3.50 m. Radio/CD, 6-speed, ABS, ESP, power steering, rear wall with window, trailer hitch with ball and electrical connection, lashing points, color, spare wheel, central locking, immobilizer, 16-inch wheels, airbag, armrests, hill-start assist, etc. =====German registration + excellent tires + last service at 84,900 km=====Detailed view of the vehicle // Detailed walkaround of the car: ?v=EC9BNWIeGYc ===Daily purchase of commercial vehicles, trade-ins possible=== Kodpfx Aozdmnaekljna Price: 9,500 EUR §25a UStG (Value Added Tax Act).

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2014, loading space length: 13,660 mm, loading space width: 2,470 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 9,000 mm, color: other, Year of construction: 2014, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes - Lift Axle = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 40% Weights Empty weight: 5.880 kg Carrying capacity: 33.120 kg GVW: 39.000 kg Kjdpfszvchtjx Aklena Maintenance APK (MOT): tested until 03/2027 Identification Registration number: ON-68-FS

Condition: used, maximum load weight: 14,310 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2013, next inspection (TÜV): 01/2027, loading space length: 6,934 mm, loading space width: 2,486 mm, loading space height: 800 mm, total length: 8,750 mm, total width: 2,550 mm, total height: 2,600 mm, Equipment: ABS, * Wooden floor with rail system * Folding side walls * Fixed front wall * Air suspension * Storage boxes * SAF axles with drum brakes Kodjztihuepfx Aklona * Wabco Trailer EBS-E -----* Tire size: 385/65R22.5 * Technically permissible total weight: 18,000 kg * Tare weight: 3,690 kg * Overall length: 8,900 * Next inspection due: 07/2026 ----Vehicle number/Vehicle: 12370----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will gladly assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arrangement of financing, application for export license plates, vehicle delivery, vehicle registration, salvage and vehicle transport.----?YOUR VTS TEAM