Used Fully-Automatic Centrifugal Disc Finishing System for sale (60,392)

Condition: ready for operation (used), Gross volume: 120l, max. swivel element: 2560mm, diameter working container: 640mm, discharge height screening machine: 880mm, connected load: 11kW, drive power rotary table 4kW, length: 2620mm, width: 2620mm, height: 2320mm. An on-site inspection is possible. Ijdey E S Evepfx Anietn

Year of construction: 2017, condition: excellent (used), Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specifically designed for the precise and reliable cutting of stainless steel pipes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser marking detection. The control panel allows you to choose whether the cut is triggered mechanically (e.g., on the back of a union nut) or fully automatically via the optical detection of a laser marking applied to the pipe. Thanks to the integrated rotating 3-jaw cutting head and a micro-spraying unit (minimum quantity lubrication), the processing is extremely tool-friendly. The pipes remain almost completely dry and free of coarse contamination. The entire process, from loading to clamping, cutting, and unloading, is highly automated and carried out in a material-saving cycle. Fully integrated labeling & traceability system: The system is designed for modern quality standards (Industry 4.0 / Automotive). After the cutting process, the barcode label is automatically generated, assigned, and printed for complete part traceability (traceability & system logging directly integrated). Due to two separate box output stations (rear sluices with sliding doors), the system automatically switches to the second station when a box is full. The removal of the finished KLT boxes takes place in parallel with the main operating time without machine downtime. Advantages of the Vario cutting head series compared to conventional cutting methods Itodozw Ukcspfx Anijn Shortest changeover times in non-cutting separation Material-saving and free of contaminants Chip-free Easy to maintain No cooling and lubricating agents required Short processing times Cuts all common materials Can be combined with common pipe magazines or from a coil Special designs are possible Technical data & capacities Maximum pipe length (feed): 1,000 mm Material specification: Optimized for stainless steel pipes (also with pre-assembled union nuts or crimped ends) Sensors & positioning: Optical sensors for the automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feed (for manual or automatic loading) Length adjustment: Manually adjustable to different pipe lengths using a mechanical handwheel Cutting method: Chip-removing sawing / Rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant system: Integrated micro-spraying unit (MMS) for minimum quantity lubrication Control: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard and mouse Setup operation: Mobile Siemens Teach-In terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety polycarbonate windows Logistics / output Integrated box placement station 2 separate box output stations for rear removal via protected sluice systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario flex Special features: Pipes with union nuts Diameter Ø 6-76 mm Output length L = 150-1,000 mm Separation based on laser marking Wall thicknesses: 1 to 1.3 mm Condition: The system is in excellent optical and mechanical condition.

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm Ijdpfx Asw Hrrrsnietn length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 6 V, NEW AUTOMATIC SACKING MACHINE (P SYSTEM Automation) FOR PELLETS – COMPLETE WITH FEEDING SCREW AND CONTROL PANEL For sale is a new automatic sacking machine (exhibition model), designed for packaging pellets and other granular materials into bags formed directly from plastic film on a roll. This solution is suitable for both integration into existing pellet production plants and for new packaging lines. Composition of the supply: • New automatic sacking machine with product weighing and dosing system. • Inclined feeding screw. • Screw designed for connection to a suction and dust extraction system. • Control unit. Iedpfx Ajz Sc Acsniotn • Conveyor belt for discharging packaged bags. Operation: The packaging cycle is fully automatic and includes: • Bag formation from plastic film on a roll. • Weight-based dosing of the pellets. • Bag filling. • Vertical and horizontal heat sealing. • Automatic cutting. • Discharge of the finished bag onto the discharge conveyor. The machine is designed to be operated by a single operator. Main technical features: • Indicative productivity: up to 200 bags/hour. • Maximum bag weight: 25 kg. • Bag width: 350–500 mm. • Bag length: 500–700 mm. • Packaging material: plastic film on a roll. • Film thickness: 60–120 microns. • Electrical supply: 400 V – 50 Hz. • Installed power of the sacking machine: 6 kW. • Control system: touch screen panel. Integration options: Upon request, the supply can be completed with: • KIT FOR CREATING FOLDED CORNERS ON THE BAGS • Pellet storage hopper of various capacities. • Suction and dust extraction system. • Automatic palletizer. • Pallet wrapper. Supply conditions: New machine, not used or reconditioned. Under manufacturer's warranty. Supply terms: Ex Works – Cremona, Italy.

Condition: used, Year of construction: 2023, Max. throughput: 156 cartons or 15 pallets/h, max. pallet height including load carrier: 1989mm, max. pallet weight including load carrier: 800kg, equipment: KOCH gantry/axis system with automatic carton and pallet handling, automatic empty-pallet and interlayer handling, product infeed with barcode recognition, extensive product and pallet conveyor technology, automatic pallet wrapping using a Lachenmeier wrapper, automatic pallet labeling by Bluhm Systeme, automatic pallet weighing by Bizerba, several stationary and mobile operator panels, central KOCH system control with remote-maintenance capability, extensive safety and protective equipment, including documentation. The system was only lightly used and has very low operating hours. Iedpfx Anjzwfr Roijtn

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, Equipment: lighting, Fully automatic continuous powder coating system (indexed conveyor, pretreatment, Wagner coating, ovens) For sale is a professional, fully automatic powder coating system as a continuous system (indexed process) from the trading agency Klaus Benecke. The system is ideally suited for the efficient coating of aluminum components as well as other metallic parts. A customized configuration of the system is possible upon request! Highlights & Key Components: - Chemical pretreatment: 2-stage spray booth (L=3,600mm, W=1,500mm, H=2,250mm) including degreasing/phosphatizing and rinsing zone with spray ring. - Flash-off oven: Continuous oven up to 120°C with 40kW LPG gas burner (Riello). (other energy supply possible) - Powder coating booth PVC 3,600: Antistatic plastic booth with mono-cyclone (12,000m³/h extraction capacity) and after-filter. - Wagner Premium application technology: 2 lifting units, 6 automatic PEA-C4 guns, 2 manual guns and control system designed for up to 10 guns. - Curing oven: Continuous oven up to 220°C with 80kW LPG gas burner (Riello). (other energy supply possible) - Conveyor system: Cardin chain conveyor C-100 in indexed operation (50m conveyor length, 54m chain). - Control system: Modern PLC control system with 7" color display (Easy View), inverter and modem for remote maintenance. Technical data: - System type: Powder coating system (continuous / indexed process) - Max. workpiece dimensions: (L x W x H) 2,500 x 800 x 1,200 [mm] - Max. load per carrier: 100 kg/traverse - Estimated throughput: approx. 50 m²/h (both sides) - Material: Aluminum / metal parts - Conveyor belt: Chain Cardin C-100 (50m) - Burner output: Dryer / Oven 40kW / 80kW (LPG gas or other energy source on request) - Control system: PLC with 7" touchscreen Condition: New system / Project Components included in scope of supply: Ijdpfx Anoum Uflsijtn - Chemical pretreatment (2-stage spray booth) - Flash-off oven - Powder coating system (PCB 3,600) - Wagner application technology - Powder curing oven - Conveyor system - Electrical control system - Services & accessories

Condition: used, Year of construction: 1998, machine/vehicle number: 1941, Vollautomatische Hochleisungsstanze - Fully Automatic Punching System Kugler 340-2RBaujahr / Year 1998 - Serial-No. 1941-340-2R Arbeitsbreite / Working width max. 340mm Format / Sizes min. 120 x 105mm Format / Sizes max. 340 x 340mm Stanzstärke / Punching thickness max. 3mm Mechanische Taktleistung pro Minute / Mechanical cycles per minute 80-100 Cycles Anlegesystem für kontinuierliches Arbeiten / Paper feeding for continuous running Iedjiypk Sopfx Anijtn Kastenauslage mit Rüttler / Paper output with Jogger Inkl. Handbücher / Incl. Manuals Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2009, Vollautomatische Hochleisungsstanze - Fully Automatic Punching System KUGLER-WOMAKO ProPunch 50-110 (R)Baujahr / Year 2009 - Serial-No. MK00579 Arbeitsbreite / Working width max. 500mm Format / Sizes min. 120 x 105mm Format / Sizes max. 500 x 500mm Stanzstärke / Punching thickness max. 3mm Mechanische Taktleistung per Minute / Mechanical cycles per minute 110 Cycles/min. Anlegesystem für kontinuierliches Arbeiten / Paper feeding for continuous running Kastenauslage mit Rüttler / Paper output with Jogger Inkl. Handbücher / Incl. Manuals Leistungsaufnahme / Power requirement 4kVA / 3kW Nennstrom / Power 10 A2 Werkzeuge / 2 tools 3:1 - 550 mm lang Online-Video-Inspection by Skype-Video Itsdpfx Aneiypk Isisn We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total height: 2,200 mm, total length: 1,700 mm, total width: 1,100 mm, rotational speed (max.): 2,650 rpm, power: 1.6 kW (2.18 HP), water tank capacity: 100 l, RÖSLER RZ 150 A cleaning system – automatic sludge removal For sale: a professional RZ 150 A cleaning system with automatic sludge removal. This unit is designed for industrial use, fully automated, and equipped with modern solutions to increase efficiency and durability. Key parameters: • Dimensions: 1700 x 1100 x 2200 mm • Power: 1.6 kW • Rotor speed: 2650 rpm • Rotor made of aluminum alloy • Steel housing Equipment and functions: • Smooth start and stop thanks to the frequency inverter • Adjustable sludge removal speed • Automatic retraction of the cleaning blade • Automatic removal of remaining water • Electronic vibration control • Automatic rotor flushing • Special bearing lubrication system to extend the unit's service life Central control unit E61-400: • Control and monitoring of the cleaning system • E61-400 control unit • SIEMENS S7-1200 controller • Ensures automatic and stable operation of the entire system Sludge removal time is adjustable from 2 to 5 minutes, depending on the consistency. A single cycle removes up to 25 kg of sludge. Additional system equipment: • Sandpiper P9 diaphragm pump for supplying water to the centrifuge • Pump operation cycle control • Water level control in the tank The set also includes a P 100 SB-P9 buffer tank for residual dirty water from the centrifuge. The tank is required if the centrifuge is located far from the source of dirty water. P 100 SB-P9 buffer tank: • Height: 700 mm • Capacity: 100 l • Designed for transporting dirty water and rotor flushing water to the buffer tank Itsdpfxezca Apj Anijn • Made of durable HDPE polyethylene (black color) • Sloping, 3-sided funnel-shaped bottom • P9 diaphragm pump – operating pressure 4 bar • Water level control RSKM 30 waste container: • Capacity: 300 l • Dimensions: 1300 x 820 x 800 mm • Manual operation • Can be transported and emptied using a forklift • Made of steel • Discharge port with drain plug • Equipped with a tilting mechanism The unit is robust, efficient, and ready for operation.

Condition: used, functionality: fully functional, overall weight: 7,500 kg, total length: 14,470 mm, total width: 3,500 mm, total height: 1,509 mm, We offer this used CSM automatic tube welding system, manufactured in 2014. Our general terms and conditions apply. Payment in advance required. Shipping costs not included. If you have any questions or require further information, please send us a message or call us. Itjdpfjz Hk Ersx Anisn Recommended tube diameters: 5 - 15 mm Wall thicknesses: 0.40 - 1.00 mm Using the profiling unit, a stainless steel strip from a coil is formed into a tube by passing through seven profiling stations. The continuously profiled tube is welded in the welding chamber (TIG) in a continuous process. The torch tracking system can detect and automatically correct changes in the position of the material joint relative to the arc during the welding process. A measuring wheel mounted on the continuously moving tube continuously measures its speed and records the length. A double straightening device eliminates any residual curvature of the tube during the continuous process. A flex unit continuously cuts the tube and places it on the sorting rail for tubes that meet or do not meet the quality requirements. Two deburring stations deburr the tube ends, and an automatic length measurement system measures each tube before it is placed in the box. The tube welding system is fully functional and can be inspected while in operation.

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: T102H00311, overall weight: 280 kg, type of input current: AC, total width: 700 mm, total length: 2,150 mm, total height: 1,010 mm, input voltage: 230 V, input current: 2 A, Morgana / Plockmatic BM350 brochure production system with SQF500 SquareFolder and FTR500 front trimmer For sale is a complete, fully functional Morgana / Plockmatic brochure production system for the professional production and processing of brochures. The system consists of: - Morgana / Plockmatic BM350 booklet maker / saddle stitch folding unit - 2 saddle stitch heads for flat wire stitching - Morgana / Plockmatic SQF500 SquareFolder - Morgana / Plockmatic FTR500 front trimmer The system enables complete brochure production in a continuous workflow: stitching, folding, spine pressing, and front trimming. The BM350 handles the stitching and folding of the printed sheets. The downstream SQF500 SquareFolder presses the brochure spine, creating a flat, square spine with a high-quality appearance. Subsequently, the FTR500 front trimmer performs a clean front trim of the finished brochure. Technical data and features: - Processing capacity BM350: up to 35 sheets / 140 pages at 80 g/m² - Processing of paper up to 300 g/m² - Paper format min.: approx. 206 × 275 mm - Paper format max.: approx. 320 × 457 mm - Suitable for A4, A3, SRA4, SRA3, and B4, among others - 2 saddle stitch heads - Flat wire stitching - SQF500 SquareFold / spine press module - FTR500 front trimmer - Power supply: 230 V / 50–60 Hz - Dimensions of the fully assembled system: approx. 2,150 × 700 × 1,010 mm - Total weight: approx. 270 kg Year of manufacture / production data: - BM350: 01/2017 - SQF500: 01/2017 - FTR500: 12/2016 The complete system is therefore offered as a 2017 model year. Condition: used, in good condition, and fully functional. The system can be inspected and demonstrated in operation after prior appointment. Ideally suited for digital printing companies, copy shops, bookbinding companies, in-house printing departments, and companies involved in print finishing, for example, for the production of brochures, magazines, programs, price lists, and similar printed products. Isdpsz Nga Ejfx Aniotn The system is preferably sold as a complete, integrated unit. Sale exclusively to businesses and entrepreneurs. The used system is sold in its current condition. The sale is made without any warranty. No guarantee and no returns.

Condition: excellent (used), Year of construction: 2009, operating hours: 3,350 h, functionality: fully functional, total length: 21,000 mm, total width: 1,200 mm, total height: 3,250 mm, type of input current: three-phase, input voltage: 380 V, feed rate X-axis: 12 m/min, working width: 270 mm, We are selling our fully automated packaging line by CSP Engineering due to production expansion and renewal of our machinery park. The packaging line is engineered for maximum output, precision and reliability in industrial production environments. The line is currently functional in production. Main features - Automatic counting system - Automatic label application with package quantity indication - Integrated folder insert system inside each package - Automatic wrapping and strapping system - Integrated measuring system - High production efficiency: up to 150 m2 per hour - Suitable for long profiles Technical specifications Itjdpfx Asy Rfftsnion - Maximum plank length: 3100mm - Maximum plank width: 270mm - Widest point of the complete line: 3100mm Machine configuration and power requirements 1. Strapex system - 5.6 AMP 2. Parscan System - 10 AMP 3. Packaging Machine - 6 AMP 4. Oven - 40 AMP 5. Destacker - 25 AMP The line can be inspected in operation and is immediately available upon agreement. Keywords: Labeling, Destacking, Stacking, Strapping, Packaging, Packing, Parquet, Wood, Wrapping, Folder, Shrinking, Shrinkoven

Condition: used, Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, For sale is a fully automatic carton erector, Knecht AS-500, manufactured in 2013, with two carton magazines and a hot-melt bottom sealing system. The system is sold complete, including the control unit. The system was used in a packaging line for car rims. It removes the carton blanks from the magazines using vacuum suction cups, erects them, and seals the bottom with four hot-melt beads per inner flap. If one magazine is empty, the system automatically switches to the second magazine. Equipment and technical data according to the order documentation: - Two pallet magazines with motorized lifting mechanisms and erecting frames - Loading of the magazines with pallets using a hand pallet truck - Processing of cartons according to FEFCO 0201 Iedpfxez Suvys Anijtn - Hot-melt system from UES with a four-module application head - Length and position of the glue beads adjustable via the control panel - Carton transport with servo motors - Vacuum pump from Schmalz - Control system: ELAU C-400 - Operation: Touch panel MP 277 - Performance: 8 cartons per minute - Carton length: 400–650 mm - Carton width: 400–650 mm - Carton height: 150–500 mm - Working height: 750–800 mm - Electrical connection: 400 V, 50 Hz - Electrical power consumption: 12 kW - Compressed air: 6 bar; consumption: 2.5 liters per carton - Format changeover: partially automatic, partially manual - Changeover time: approx. 2 minutes, excluding emptying and refilling of the magazines The used system has been regularly maintained and is in very good condition. It is being sold due to a business closure and was in operation until it was dismantled. In its dismantled state, a functional test is no longer possible. An inspection at the location in 36381 Schlüchtern is possible by arrangement. The system can be loaded onto a truck on site. A video of the packaging line and detailed system documentation are available upon request. A Knecht VS-500 carton closer is offered separately.

Year of construction: 2015, condition: excellent (used), Ref: 11161 . 2015 Pack-Smart IPF 30-27-4 Integrated Finishing System Ideal for direct mail, gift card and security packaging, media packaging, tipping, windowing, folding, gluing and other specialist print-finishing applications. Iedpfjz Iz Sfox Anietn Equipped with: Rotary vacuum paper feeder Precision product alignment & registration Dual servo-driven vacuum transport conveyors Twin-head hot melt glue system Servo-driven cold glue pattern system Scoring / perforating module Front fold tooling 3 x plow fold stations Turnover / straight-through module Transfer conveyor Shingled delivery conveyor 10-axis servo control system 10" colour touchscreen HMI Recipe storage & recall Integrated vacuum system Interlocked safety guarding Specification: Maximum production speed: 12,000 products per hour Maximum conveyor speed: 122 m/min Carrier size: 102–762 mm wide x 102–813 mm long Stock: 145 gsm up to 0.86 mm thickness Secondary rotary pick & place feeder Secondary product size: 54 x 54 mm to 150 x 150 mm Secondary feeder speed: up to 500 products/min Electrical: 230V / 3Ph Air requirement: 4.1–7 bar

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position Iodpfxozuzbcj Anietn - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Year of construction: 2020, condition: new, functionality: fully functional, This new brewery, still wrapped in plastic from the production factory, has been purchased in 2020 but was never installed after planning permission failed by the local government. So, it's a complete set, see details, alle brand new (!) but for a very attractive price. New it will be approx. 640K, this one is for 360.000€. All manuals etc available, as well as a plan for installation with support from manufacturer (separate billing). Itedpfxozz Rbxo Anion PLEASE NOTE: WE DO NOT SUPPLY VISA / WE DO NOT PROVIDE SPREAD PAYMENT. We are a brewery, not a trader nor manufacturer.

Condition: excellent (used), Year of construction: 2011, We are pleased to present for Sale the Automatic transfer system TREC NT from Stork. Manufacturer: Stork Itjdpfxewdibxe Anijn Type: TREC NT Year: 2011 Iasbor Igpgstt Shdfor Capacity: 13500bph Condition: Used/Very good

Year of construction: 2026, condition: new, functionality: fully functional, For sale: new Juneng KYDB204 disc stack centrifuge / 3-phase separator. Manufacturer: Juneng Machinery Model: KYDB204 Type: disc stack centrifuge / centrifugal separator Separation: liquid-liquid-solid / 3-phase separation Drum diameter :242(mm) Rotary speed: 8086(r/min) Motor model and power: Y112M-4-B5 4KW Capacity: 0.5-2m3/h(depend on material condition ) Power: 4(KW) Dimension（L*W*H） 830*610*1150(mm) Weight: 580(kg) Degree of automation :Automatic cleaning and slag discharging Dimension: 810*968*1139mm(L*W*H) Material: stainless steel, according to manufacturer specification Condition: new / unused Application: oil-water-solid separation, liquid clarification, fine separation Seller: Leonagra s.r.o., EU company EU invoice possible Delivery to Europe can be arranged Iedpszlby Hofx Anistn The Juneng KYDB204 is a compact industrial disc stack separator designed for continuous liquid-liquid-solid separation. It is suitable for applications where oil, water and fine solid particles need to be separated in a closed centrifugal system. Typical applications: edible oil clarification vegetable oil / crude oil polishing oil-water separation fuel / lubricant treatment fine chemical liquid separation food and beverage liquid clarification industrial process liquid separation Main advantages: compact disc stack centrifuge design continuous operation closed inlet and outlet system high-speed centrifugal separation fine separation of liquid phases and solids stainless steel execution according to manufacturer specification suitable for integration into existing process lines The machine is offered as new equipment through an EU seller. Delivery, documentation and final technical confirmation can be arranged before order. Technical details to be confirmed according to final product application. Price: FCA / delivered EU by agreement, plus VAT where applicable. Zu verkaufen: neue Juneng KYDB204 Tellerzentrifuge / 3-Phasen-Separator. Neue Juneng KYDB204 Disc-Stack-Zentrifuge zur kontinuierlichen Flüssig-Flüssig-Feststoff-Trennung. Geeignet für Öl-Wasser-Feststoff-Trennung, Pflanzenölklärung, Prozessflüssigkeiten, Lebensmittel-, Chemie- und Industrieanwendungen. Kapazität: ca. 2.000 l/h, abhängig vom Produkt und Prozess Motorleistung: ca. 4 kW Ausführung: Edelstahl gemäß Herstellerspezifikation Zustand: neu / unbenutzt EU-Verkäufer: Leonagra s.r.o. EU-Rechnung möglich Lieferung nach Europa kann organisiert werden Technische Details und Eignung bitte je nach Anwendung final bestätigen.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Industrial self-cleaning disc filtration system manufactured by CHEMIPOL. The unit was installed as part of a reverse osmosis water treatment plant and was used for water pre-filtration. Itodpfx Anszvlm Ejisn The system is equipped with eight TW-type disc filter units operating in parallel. Automatic cleaning is controlled by a Siemens PLC with an HMI operator panel. TECHNICAL DATA Manufacturer: CHEMIPOL Model: TW8P2L3 Equipment type: Self-cleaning disc filtration system Number of filter units: 8 Filter type: TW disc filters Configuration: Parallel operation Cleaning system: Automatic self-cleaning Pressure monitoring: Two pressure sensors measuring inlet and outlet pressure Control system: Siemens PLC Operator interface: HMI touchscreen Application: Water treatment and reverse osmosis pre-filtration

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display Itjdpfx Aoz Sll Hsnien • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Year of construction: 1996, condition: used, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Used Complete System – Fully Operational – Inspection Possible During Production For sale is a complete and fully operational STEIMEL chip conveying and de-oiling system, which is currently still in use in serial production. The system has been used exclusively for conveying and de-oiling brass chips and is being sold solely due to the modernization of our production facilities. It is a continuous centrifugal de-oiling system. A major advantage for prospective buyers is that the system can be inspected while in operation before dismantling. Technical drawings and documentation are available. Dismantling is scheduled for October 2026. This system is ideally suited for companies in the machining and metalworking industry looking for a reliable and cost-effective solution for chip handling and the recovery of oil and coolant. Technical Data Manufacturer: STEIMEL Type: Continuous Centrifugal System, Type K50 Operating Principle: Centrifugal separation Year of Manufacture: 1996 Isdszhui Hepfx Aniotn Condition: Used, fully operational. The centrifuge drum (main component) was completely overhauled and has been back in operation since June 2026. Availability: Expected from October 2026 Location: 73630 Remshalden, Germany Processed Material: Brass chips (leaded and lead-free) Performance Capacity: 2,000 kg of de-oiled chips per 24-hour operation Residual moisture achieved: between 1.8% and 4%, depending on the chip type Residual moisture can be adjusted by: * centrifuge drum speed, or * chip elevator conveying speed * Simultaneous loading of up to 8 chip carts * Chip bunker capacity: approx. 800 litres Scope of Supply * Complete chip conveying system including centrifugal de-oiling unit * Oil reservoir not included * Technical drawings and documentation included * EXW (Ex Works), loaded and ready for collection at our loading dock Key Features * System is currently still in production use * Inspection under real production conditions possible by appointment * Robust industrial design * Proven STEIMEL quality * Sale of the complete system preferred The system has been regularly maintained and remains fully operational until dismantling. Interested buyers are welcome to inspect the equipment on site and verify its performance and condition. Additional photos, technical documentation, and engineering drawings are available upon request.

Condition: excellent (used), Year of construction: 2004, 1 used, very well-maintained fully hydraulic circular cold saw automatic with flat vertical guides Max. saw blade diameter: 325 mm Cutting capacity at 90°: - Round: 100 mm - Square: 85 x 85 mm Itjdpfjy E Uk Isx Anijn - Rectangle, flat: 165 x 85 mm Infinitely variable speed range: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single stroke feed: up to max. 550 mm Multiple stroke feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2150 x 1450 x 1950 mm Weight: approx. 650 kg Accessories / Special Features: • Fully hydraulic design • Fully automatic operation, single cuts also possible • Vise feed • 90° cutting angle • Infinitely variable speed range 20 - 100 rpm • Length setting via programming on the control panel • Cutting speed and feed can be continuously adjusted on the control panel during operation • Single and multiple stroke feed • Adjustable flat vertical guides • Coolant system • Micro-spray system • 1 used saw blade included • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST Fully Automatic PLC Parts Washing System The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without disassembly. The unit is space-saving, quiet, and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz plug 16A CEE 5p 6h Drain: 1 1/4“ outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Complete components (without disassembly) Quality seal: Stainless steel, service package available Maximum filling volume: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 KG Application area: The RWR 80 L KST Fully Automatic PLC has been developed for the plastics injection molding field and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST Fully Automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system will begin to heat up. During the heating period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically after the instructions displayed on the display have been confirmed. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone. Itodpfx Anezgclmoien

Condition: ready for operation (used), Year of construction: 1986, Available immediately from our location: Itsdpfx Ansz Ixkreijn Fully automatic milling machine, Busch Type NF 8/32 Year of manufacture 1986 Groove width up to 32 mm Processing length up to 6100 mm Automatic material feed Automatic feed Drive power 5.5 kW Accessories: Support table Clamping devices, milling cutters Coolant system Digital display Weight 4 tons Price: EUR 2,500.00 plus VAT, ex works

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Itsdpfxswz Ev Ts Anijn Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm length: 350 mm Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.