Used Gea Cf 3000 for sale (7,691)

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, overall weight: 2,000 kg, rotational speed (max.): 4,700 rpm, total height: 1,500 mm, total length: 3,300 mm, total width: 870 mm, power: 22 kW (29.91 HP), TECHNICAL DETAILS Drum diameter: 340 mm Maximum drum speed: 4,700 rpm g-factor: max. 4,198 g MACHINE DETAILS Main motor power: 22 kW Secondary motor power: 11 kW Motor operation: Frequency converter Drive system: Summation drive Inlet and outlet connections: DIN 11864-2 DN40 / DN25 Dimensions & Weight Dimensions (L x W x H): 3,300 x 870 x 1,500 mm Weight: 2,000 kg EQUIPMENT Temperature sensors on both drum bearings Pedpfxoy Hiv Us Aphogr Level monitoring for gearbox oil and oil-air lubrication Pressure sensor for oil-air lubrication Vibration monitoring: continuous monitoring of drum bearings on both sides Speed monitoring via proximity sensors Further configuration details can be found in the attached document.

Condition: used, Year of construction: 1988, from training workshop, public authority pivotable for long workpieces used, in good condition machine cleaned, overhauled greased, function tested, trial run manufacturer Gea type Kapre 3000 year of manufacture 1988 one-sided from below press cylinder Psdswbi Exepfx Aphjgr 1 heating rail working length 3000 mm pneumatically operated mobile New parts: mist lubricator compressed air lines 2 pot seals for press cylinder 2 pot seals for clamping cylinder plug for heating rail Storage location 97447 Gerolzhofen, loaded free on truck, unpacked Handover in current condition as inspected, without warranty or liability

Condition: like new (used), Year of construction: 2019, operating hours: 300 h, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Pgjdpfx Aozgq Szsphjr Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: good (used), functionality: fully functional, I am selling a Scheer FM 2-30000 joining and precision cutting machine from my carpentry workshop. The machine is still in good condition but is no longer being used. That is why I am selling it. Podoztgnlspfx Aphsgr The machine can be inspected and tested on site in Stuttgart.

Condition: used, Year of construction: 2020, functionality: unexamined, machine/vehicle number: 1739-596, rotational speed (max.): 4,800 rpm, Equipment: type plate available, Used disc stack separator for fermentation lees separation. Machine mounted on a complete skid with the option to purchase additional spare parts. Motor: 55 kW - 60 Hz. Belt drive. Permissible nominal bowl speed: 4,800 rpm. Minimum throughput: 8 m³/h; maximum throughput: 22 m³/h. Permitted feed product density: 1.16 kg/dm³. Permitted heavy liquid density: 1.1 kg/dm³. Permitted solids density: 1.3 kg/dm³. Maintenance tool set with ring spanner and compression tool included. Pjdpfx Ajxy R A Tjphegr

Year of construction: 2002, condition: ready for operation (used), Ilapak Delta 3000 Stainless Steel Flow Wrapper With gas flush facility In current daily use Ready for removal Sealing bar is 250mm wide Psdpfx Aoy Rvfqephsgr See video attached Price € 7,500 We can organise shipping / delivery for you.

Condition: used, conveyor belt width: 1,000 mm, GEA CFS Koppens inline fryer, heated by thermal oil. 3m frying length, 1000mm wide belt. Auto canopy hoist, top hold down belt. Older machine, has been in storage for a long time, previously used for frying onion bhaajis and pakora. Pjdpfjx Av Duox Aphjgr

Condition: like new (used), Gea CFS Koppens Thermal oil fryer BR 3500/600 Suitable for thermal oil heating; Net belt length: 3.500 mm Net belt width: 600 mm Machine dimensions (LxWxH): 6.000x900x1.600 mm Machine weight: 750 kg. Pgedpfxokvni Ao Aphjr Capacity: 250 kg/h in 600 liter oil

Condition: ready for operation (used), Year of construction: 2003, A self-cleaning disc stack centrifuge (disc separator) GEA is available. Drum speed range: 4000-4800rpm, drum diameter: 682mm, max. feed density liquid/solids: 1.1kg/dm³/1.3kg/dm³, drum volume: 125l. An on-site inspection is possible. Pgedpfx Apsydpz Doher

Condition: used, all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 8 mm suitable for thermal oil heating (= 120 kW) with top hold down belt oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system Pedozvpmpspfx Aphogr lifting unit with electrical hoists suitable for fire protection overall length : ± 5.400 mm overall width : ± 1.500 mm New electric control box with new electrical components

Condition: used, all stainless steel Podpfx Ajzwlmhephegr electrically heated, 90 kW net belt length 3.000 mm net belt width 600 mm frying time min/max : 25/250s with lower and upper belt sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm suitable for fire protection weight : 2.750 kg oil level control circulation pump with Teflon infeed belt

Condition: used, suitable for thermal oil heating (= 131 kW) 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control sediment removal system filter Pgsdpfozwddfsx Aphor lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Condition: excellent (used), Year of construction: 2011, We offer a used GEA-CFS TwinGrill TWG 1800/600 — an industrial machine designed for continuous grilling, toasting, and thermal processing of a wide range of food products. The machine is ideal for meat, poultry, and fish processing plants, as well as facilities producing convenience foods, ready-to-eat meals, and semi-finished products that require consistent and controlled heat treatment. The GEA-CFS TwinGrill TWG 1800/600 model is designed as a continuous grilling line made of stainless steel. The unit utilizes a dual grilling system with independently adjustable upper and lower heating zones. The temperature of the upper and lower grills can be adjusted separately, allowing for precise adaptation of the process to the type of product, its thickness, texture, and the desired final result. The machine allows products to be grilled on both sides, ensuring uniform cooking results, an attractive surface appearance, and consistent quality across successive production batches. A temperature range of 50 to 260°C and an adjustable belt speed ranging from 0.3 to 3 m/min allow the grilling time to be tailored to various food products. The TwinGrill is equipped with an intuitive control panel and a user-friendly interface that simplifies operation, process monitoring, and the setting of operating parameters. The ability to create and adjust processing programs allows for better control over the cooking and grilling process, as well as increased production consistency. Thanks to its hygienic design, high-quality stainless steel construction, and belt-cleaning system, the unit is easy to clean and suitable for use in the food industry. Additional features, such as removable grill plates and grease collection systems, facilitate routine maintenance and keep the unit clean. The GEA-CFS TwinGrill TWG 1800/600 is a versatile solution for grilling meat, poultry, fish, vegetables, formed products, burgers, cutlets, and ready-to-eat convenience foods. The machine can operate as a standalone unit or as part of a larger production line, e.g., following forming, marinating, breading, or preliminary processing of the product. Technical specifications: Manufacturer: GEA CFS Bakel B.V. Model: TWG 1800/600 Type: TwinGrill / industrial double-sided grill Machine number: 662 Year of manufacture: 2011 Net working length: 1800 mm Conveyor belt width: 600 mm Power supply: 400 V Phases: 3 Ph Frequency: 50 Hz Installed power: 97 kW Heating power: 93 kW Temperature range: 50–260°C Belt speed / grilling time: 0.3–3 m/min Belt cleaning system: included Construction: stainless steel Weight: approx. 2250 kg Applications: grilling burgers grilling cutlets and formed products processing poultry fillets production of grilled meat products processing fish products Pgsdezicutjpfx Apher grilling vegetables production of ready-to-eat meals production of convenience foods Lines for grilled, roasted, and cooked products Meat, poultry, and fish processing plants Large-scale food service and catering production

Condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. Trumpf TruPrint 3000 G02, featuring Zirox sensor, single laser, and powder bed monitoring options. Trumpf TruPrint 3000, including filtration system Serial number: S0721Q0022 Laser runtime: 17,508 hours (laser beam on) Most recently used with AlSi10Mg aluminum alloy The 3D printer has already been dismantled by the manufacturer. Dismantling and functional test reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. Accessories: 4x dosing containers 1x build cylinder 1x overflow container Various spare parts (e.g., protective glass) Manuals Pgsdpfxozpvums Apher An Armanni CAR.Elev. pallet truck for container exchange is also in stock and available as an optional add-on. Faster production of high-quality 3D components D1. Machine concept The TruPrint 3000 is a versatile medium-format machine featuring external part and powder management for the industrial production of complex metal components via 3D printing. Thanks to its large build volume, it offers great flexibility regarding the size, quantity, and geometry of parts for specific applications. Technical data TruPrint 3000 Build volume (cylinder) mm x mm: Ø 300 x H 400 Processable materials: Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chrome, copper, titanium, or precious metal alloys. Build rate cm³/h 5 – 60 Layer thickness μm 20 – 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 – 500 O₂ concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring – Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Shielding gas – Nitrogen, argon Power supply V / A / Hz 400 – 32 – 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The specifications in our quotation and order confirmation are authoritative. Technical data TruPrint 3000 Tab. 3

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 2215, Type: OptiFlour 600 II Pedpfxeymbfas Aphsgr Serial number: 2215 Year of construction: 2013 Belt width: 600 mm Power: 3 x 400V, 50Hz, 5.3kW Dimensions: 2750 x 1650 x 2300 mm Weight: 1025 kg GEA OptiAir cyclone Type: OPA Serial number: 515 Year of constuction: 2011 Power: 3 x 400V, 50Hz, 4kW Dimensions: 1350 x 950 x 1800 mm Weight: 450 kg

Condition: ready for operation (used), For sale is a drainage machine that is immediately ready for use. It can reach a depth of up to approximately 2 meters. The undercarriage still has at least 80% of its original capacity. It is pre-equipped for a Moba laser control system, but the system itself is not included. The machine is being sold due to the purchase of a new one. There are no technical defects. Pgsdjzkvd Dspfx Aphor

Condition: like new (used), Cutter CFS GEA CutMaster 500 VACUUM After capital renovation 3 months warranty for parts Pgsdpfx Apsyn Dy Noher

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, GEA KOPPENS PRF 600 PerFormer | Plate former for burgers, nuggets, and convenience food products Manufacturer: GEA Koppens / Convenience Food Systems (CFS) Model / Type: PRF 600 PerFormer Serial number: 712 Year of manufacture: 2001 Power supply: 400 V | 50 Hz | 3 Ph | 60 A Power: 30 kW Working width of the belt: 600 mm Machine weight: 2850 kg The GEA Koppens PRF 600 PerFormer is a high-performance, industrial plate former designed for use in automated production lines in the meat, fish, convenience food, and vegetarian industries. This machine is an industry standard, dedicated to the precise shaping of products such as burgers, nuggets, meatballs, fish sticks, and cutlets. Thanks to its advanced raw material distribution system, the former guarantees perfect consistency in weight and preserves the fiber structure of the processed material. Pgodjzkv Nmspfx Aphor The core of the machine is a proven plate forming mechanism with a working width of 600 mm, which works in conjunction with a large loading hopper, enabling the achievement of the highest production rates required in industrial processing plants. The operation of the PerFormer former is characterized by minimal raw material loss and a uniform compaction level of the final product, which directly translates into optimized production costs.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Croquette production line from the brands Koppens/GEA and Alexanderwerk. Pedpfx Aozk E Tuophsgr Equipped with: - KOPPENS/GEA EPR 200 breading line. - KOPPENS/GEA breading/conveyor belt. - Alexanderwerk NFV 50 vacuum filling machine. - Stainless steel rotary table/buffer table for extra breading. The line has already been dismantled and transported to the pick-up location.

Condition: excellent (used), functionality: fully functional, GEA / Stork / Koppens Forming, Breading, and Frying Line Manufacturer: GEA / Stork / Koppens Line type: forming, breading, and frying of food products The line consists of the following equipment: 1. Meat Bin (stainless steel) Capacity: 200 l 2. 200 l Bin Lifter Manufacturer: CFS Type: LFT (R) Machine number: 1642 Power supply: 400 V, 3-phase, 50 Hz Power: 0.55 kW Current consumption: 1.8 A Weight: 310 kg Lifting height: up to 2200 mm (adjustable) Dimensions: 1200 × 1300 × 3000 mm 3. Former Manufacturer: GEA Food Solutions Bakel B.V. Model: MultiFormer 400 Machine number: E022110205415 Year of production: 2021 Power supply: 380–415 V, 3-phase, 50 Hz Power: 8 kW Current consumption: 15.4 A Belt: stainless steel wire mesh Belt width: 400 mm Machine dimensions: 3100 × 1000 × 2700 mm Additional forming accessories: - 2 pallets of forming plates - Stainless steel rack with 2 additional discharge belts (belt width: 400 mm) - Rack dimensions: 1350 × 600 × 2100 mm - GEA tool trolley - Trolley dimensions: 1200 × 700 × 950 mm 4. Breading Machine/Breader Manufacturer: Stork Titan B.V. Model: RotoCrumb TRC 630 TD 2112 Type: 4780626AA Serial number: 10061097 Year of production: 2007 Belt: stainless steel wire mesh Belt width: 630 mm Dimensions: 3600 × 1600 × 2100 mm 5. Stainless steel platform for IBC tanks Working height: 1800 mm Dimensions: 1200 × 1500 × 2800 mm 6. Fryer Manufacturer: Koppens Machinefabriek B.V. Type: BR 3000 / 600 Machine number: 1316 Year of production: 2000 Power supply: 400 V, 3-phase, 50 Hz Power: 1.5 kW Current consumption: 4.6 A Pgjdpfx Asx H T Egjphsr Weight: 2450 kg Belt: stainless steel wire mesh Belt width: 600 mm Frying length: 3000 mm Heating system: thermal oil Manual hoists Fryer dimensions: 5400 × 1600 × 3200 mm Fryer accessories: - Valve station – 2200 × 600 × 2600 mm - Thermal oil station with pump – 1300 × 800 × 2700 mm - Stainless steel cabinet with 2 Ansul fire extinguishers – 600 × 210 × 750 mm 7. Oil Tank (stainless steel) Manufacturer: Koppens Machinefabriek B.V. Diameter: 1100 mm Height: 3200 mm 8. Belt Conveyor with Covers Manufacturer: Koppens Machinefabriek B.V. Model: NGT 5000/600 Serial number: 12 Power supply: 380 V, 3-phase, 50 Hz Belt width: 600 mm Dimensions: 6900 × 900 × 1150 mm 9. De-elevating Belt Stainless steel wire mesh belt Belt width: 330 mm Adjustable height Dimensions: 2000 × 800 × 850 mm Complete GEA / Stork / Koppens line is intended for industrial production of formed, breaded, and fried food products such as nuggets, burgers, patties, and convenience foods. The line enables a continuous and automated processing workflow — from raw material loading, through precise forming and even breading, right up to controlled frying with thermal oil. The set is characterised by high performance, robust stainless steel construction, and the potential for integration with other production line elements.

Condition: used, Year of construction: 2002, power: 90 kW (122.37 HP), The CFS ChunkMaster 400 industrial grinder is a heavy-duty machine designed for meat processing plants that require exceptional performance, consistent raw material particle size, and the highest quality finished product. The machine is based on the proven Wolfking/CFS grinding platform, later continued as part of the GEA product portfolio, which is why the ChunkMaster 400 enjoys an excellent reputation in the industry for its reliability, durability, and low maintenance costs. Technical Specifications of the CFS ChunkMaster 400 Meat Grinder Manufacturer: CFS Model: ChunkMaster 400 Equipment type: Industrial meat grinder Year of manufacture: 2002 Grinding system diameter: Ø400 mm Power supply: 400 V, 3-phase, 50 Hz Current draw: 162 A Power: 90 kW Dimensions: What is the CFS ChunkMaster 400 meat grinder used for? Podpfx Apszmgqtohsgr The ChunkMaster 400 is designed for grinding a wide range of meat raw materials: beef, pork, poultry, fat, and trimmings, as well as fresh, chilled, and slightly tempered meat. The machine is well-suited as part of a raw material preparation line for the production of sausages, ground meat mixtures, burgers, pet food, and convenience products. The large feed hopper, with a diameter of Ø400 mm, allows for the processing of significant quantities of raw material while ensuring gentle handling of the product and minimal temperature increase during grinding—which directly impacts the quality and shelf life of the finished product. Design and Cutting System The ChunkMaster 400 grinder is equipped with a robust stainless steel frame, a durable feed auger, and an industrial gearbox designed for continuous operation in large meat processing plants. The raw material feeding system ensures a smooth and uniform product flow, minimizing compression—thereby preserving the natural structure of the muscle tissue and resulting in a higher-quality final product. The machine can be configured with various Unger cutting sets, allowing for raw material particle sizes ranging from coarse pre-grinding to fine grinding, depending on the blades and screens used. Key advantages of the CFS ChunkMaster 400 grinder Large grinding system with a diameter of Ø400 mm, Exceptionally high production capacity, Gentle handling of raw materials, Minimal temperature increase during grinding, Excellent preservation of meat particle structure, Industrial-grade, heavy-duty gearbox and hygienic stainless steel construction, facilitating access for cleaning and maintenance, Easy access to replacement parts; screens, cutting blades, and drive belt included One of the greatest advantages of the ChunkMaster 400 grinder is the continued availability of replacement parts. Many mechanical components remain compatible with later CFS MaxiGrind and GEA MaxiGrind series, and independent manufacturers continue to offer OEM replacements—which significantly facilitates the long-term operation and servicing of this machine.

Condition: used, Year of construction: 2018, machine/vehicle number: LC667, Used GEA Aseptic line 48000 BPH - year 2020 (data of use)Technical Specifications & Performance DataThis used bottling line is a 2020 PET aseptic production line configured for 230 ml PET bottled water at a rated output of 48,000 bph. It combines PET bottle blowing, aseptic processing, filling, capping, labeling, inspection and secondary packaging for high-output beverage production.* Production capacity: 48,000 bph* Available bottle format: 230 ml PET only* Main line year: 2018, 2020 (data of use)* Blowing equipment: SIPA SFR24 EVO, 48,000 bph* Filling equipment: GEA FILLSTAR FX AS 84 PET filler, 48,000 bph* Compressor: AF L5S, 35 bar, 220 kWAdvanced Automation & Control SystemsThe line includes electrical control cabinets with HMI displays, ventilated electrical enclosures and high-voltage warning protection. Process equipment includes a Tetra Pak FLEX1 PET UHT sterilizer rated at 17 t/h, a Tetra Pak 15,000 L/h homogenizer rated at 90 kW, a 15,000 L/h yogurt secondary pasteurizer, pulsed-light sterilizers, laser marking machines and visual inspection systems.Product preparation assets include four 25 m³/h centrifugal pumps rated at 7.5 kW, two 30 m³/h centrifugal pumps rated at 18.5 kW, one 12,000 L/h rotary pump rated at 7.5 kW and one 20,000 L/h rotary pump rated at 18.5 kW. The installation also includes a triple 100 mm high-pressure filter, model ECS7003SCA5H19-A61.Production Line Integration CapabilitiesThe PET production line integrates bottle blowing, drying, aseptic filling and capping, cap handling, labeling, coding, inspection, carton packing, sealing and conveying. A GEA conveyor chain system provides bottle transport at 20 to 60 m/min. Five bottle dryer sets with conveyors are included, together with two GEA dryers rated at 700/840 m³/h.Machine type | Manufacturer / model | YearMachine typeManufacturer / modelYearBlow Molding MachineSIPA SFR24 EVO2020 (data of use)Filling MachineGEA FILLSTAR FX AS 84 PET2020 (data of use)Labeling MachineGuangzhou Lixin AP-400H2020 (data of use)Labeling MachineGuangzhou Santuo SL-695 Pgedpfx Apezwu Uuehsr

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 99900338790, wall thickness: 10 mm, overall weight: 1,300 kg, control cabinet length: 700 mm, control cabinet width: 400 mm, control cabinet height: 2,000 mm, total height: 1,300 mm, total length: 2,300 mm, total width: 800 mm, inner dimension length: 2,000 mm, empty load weight: 1,300 kg, Equipment: documentation/manual, The GEA Westfalia Separator UCD 305-00-00 is an efficient two-phase decanter designed for effective separation of liquids and solids. Thanks to its flat conical trommel and extended drum length, it optimizes the separation process and ensures effective liquid discharge. DRUM AND HOUSING CONSTRUCTION The standard housing design provides a robust construction that meets the requirements of industrial applications. Inert liquid discharge enables easy operation and reduces maintenance costs. Pgsdpfxszrmh Ae Aphor DRIVE TYPES The belt drive of the drum ensures reliable and uniform rotational movements, while the worm gear drive enables precise control of solid discharge. This combination guarantees high efficiency and durability of the machine. The GEA Westfalia Separator UCD 305-00-00 offers an effective solution for liquid and solid separation. Centrimax is a good and reliable supplier of this machine. This description may have been automatically translated. For further information, please contact us. The information contained in this advertisement is for general guidance only. We suggest verifying the details with the seller before making a purchase.

Condition: good (used), 3m x 1000mm thermal oil fryer with teflon infeed and top hold down belt. Podpjq Iq Nbjfx Aphogr

Condition: not inspected (used), 3m x 1000mm thermal oil fryer, direct from closed snack food factory where it was frying samosas and onion bhaajis. Complete with top hold down belt and teflon infeed. Machine was removed from the factory when it closed in 2015 and has been in storage ever since. Pjdeh Uhamjpfx Aphjgr