Used Bohm Kruse for sale (24)

Condition: good (used), functionality: fully functional, For sale is a robust Bohm & Kruse multi-nailing machine, type II 10/600, machine number 6604. This machine is suitable for efficient series production and for simultaneously driving multiple nails, for example in the manufacture of wooden crates, packaging, and similar wooden structures. The nails are automatically fed to the nailing heads via multiple feed tubes. The working height is adjustable. In addition, the machine is equipped with a riveting device. Technical data: Manufacturer: Bohm & Kruse Type: II 10/600 Machine number: 6604 Design: Multi-nailing machine Working width: approx. 600 mm Number of nailing positions: up to 10 Automatic nail feed via feed tubes Nail size: approx. 1.1–1.4 mm × 25–40 mm Adjustable working height Riveting device available Mechanically adjustable units Robust cast iron/steel construction Transport dimensions: approx. 1,600 × 1,600 × 2,400 mm Weight: approx. 900 kg Used, robust industrial machine with signs of wear and tear due to age and use, see photos. Transport is possible for an extra charge! Knedpfx Aszxxuuofdob The machine is currently still at the customer's site but would be available in the short term! The machine will be inspected before sale. If sold to commercial customers, the warranty will be excluded due to the machine's age. Technical data and equipment may vary. Errors, prior sale and changes reserved. All information without guarantee.

Condition: good (used), Year of construction: 1980, max. pallet size 120 x 165 cm 20 nail guides Knjdpfxjxpi N Rj Afdeb year of manufacture 1980, still in good condition

Condition: good (used), functionality: fully functional, For sale is a used nailing machine from the manufacturer Bohm & Kruse, designed for the production and assembly of wooden crates. The machine is specifically designed for nailing crate parts and also features a riveting device. For safety reasons, the machine is enclosed and equipped with a two-hand control. Technical data / equipment: Manufacturer: Bohm & Kruse Machine type: Crate nailing machine / Nailing machine For nailing crate parts Riveting device available Multi-nailing head Workpiece support / workbench Adjustable workpiece stops Safety enclosure with protective grille included Two-hand control Emergency stop Robust industrial design The machine is in used condition. Equipment and condition as shown in the photos. Transport is possible for an additional charge! Knedpfx Aozym Niefdeb The machine is currently still at the customer's site but would be available in the short term! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: good (used), functionality: fully functional, For sale is a robust Bohm & Kruse continuous printing machine for printing on wood parts, especially wine crates, wooden boxes, and similar workpieces. The machine operates in a continuous process and is equipped with a printing roller. Letters and numbers can be used according to the desired lettering and used to print the workpieces. A large stock of letters and numbers is available. Technical data / Features Manufacturer: Bohm & Kruse Maschinenfabrik Machine type: Continuous printing machine / Wood printing machine Suitable for printing wine crates and wooden boxes Continuous printing roller Mechanical workpiece feed Letters and numbers can be used for individual labeling Many letters and numbers available for typesetting Adjustability for different workpieces Heavy-duty industrial design Robust mechanical construction Used condition as shown in the photos Ideal for the production and individual labeling of wine crates, packaging crates, and other wood products. Transport possible for an additional charge! The machine is currently still at the customer's site. The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Kedpfx Aozx U N Ujfdonb Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: excellent (used), I am offering for sale a professional Bohm Wiedenmann Super 300 sweeper-collector with a working width of 1.5 m. This machine is designed for collecting cut grass, leaves, branches, thatch after scarification, and other debris from green areas, sports fields, parks, golf courses, and large lawns. The Super 300 model is highly regarded for its robust construction and high performance. Technical data: * Manufacturer: Bohm Wiedenmann GmbH Kjdpfx Aszmhz Tjfdonb * Model: Super 300 1.5 * Year of manufacture: 1998 * Working width: 1.5 m * Permissible total weight: 1450 kg * Permissible axle load: 1250 kg * Permissible drawbar load: 200 kg * Maximum transport speed: 40 km/h * PTO shaft * Large collection container * Hydraulic control The machine shows normal signs of wear and tear consistent with its age. It is being sold in the exact condition as shown in the photos.

Condition: used, Year of construction: 2004, functionality: unexamined, EPAL Production line is for sale in Latvia Consists of: Wood lengthening machine - KALLFASS PFA-250 Pallet leg lengthening machine - Bohm & Kruse Pallet top nailing machine - ENGELER Pallet turning machine Chain conveyor Pallet nailing machine - Bohm & Kruse Marking/corner cutting machine - Bohm & Kruse, Type 3/24/1500 Milling machine Roller conveyor Knedpfx Ajwgacrefdeb Stacker - ENGELER ELEWFTORSTAPLER

Condition: excellent (used), Bohm & Co. spiral binding machine (similar to RENZ) For plastic and metal spirals in various diameters (Various tabs available for different diameters) Other bookbinding machines available: Hang eyeleting machine, Tränklein corner rounding machine, Kroll punching machine, etc. Price plus VAT EXW. All information is subject to change without notice. Subject to prior sale. Dealership. This sale is made without any warranty. Knodowgy I Ijpfx Afdjb

Condition: like new (used), Year of construction: 2023, operating hours: 2,763 h, functionality: fully functional, machine/vehicle number: 346574, turning length: 500 mm, turning diameter: 276 mm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, bar diameter (max.): 80 mm, Equipment: rotational speed infinitely variable, The machine was commissioned in February 2024 and has 1,778 automatic hours. It has only been used for machining plastics and brass. The subspindle is equipped with a two-jaw chuck for holding workpieces for milling contours. The machine can be inspected under production conditions at any time. It is in like-new condition. Total investment including accessories: €241,000. Equipped with a 12-station turret, all driven. Sale EXW 91413 Neustadt, Germany. Knjdjynnhwopfx Afdsb

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: C4652, grinding length: 5,100 mm, grinding width: 250 mm, overall weight: 9,100 kg, space requirement height: 2,300 mm, space requirement length: 9,000 mm, space requirement width: 4,000 mm, Reform AR 51 Type 7 Surface grinding machine Year of manufacture: 1990 Ksdotqtk Ajpfx Afdonb Grinding length: 5100mm Grinding width: 250mm Workpiece height: 220mm Total power requirement: 36kW Used water system Lifting station, magnetic roller, pump

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: C4656, grinding length: 4,100 mm, grinding width: 200 mm, Reform AR41 Type 7 C4656/91 Year of manufacture: 1991 Grinding length: 4100mm Grinding width: 200mm Workpiece height: 190mm Table clamping area: 4169x202mm Ksdjtqtppopfx Afdsnb Segment head diameter: 250mm Spindle diameter in the front. Bearing: 45mm Swivelling: 2° Max. torque: 2x45.8Nm 2x grinding motor 7.5kW Feed: 2000-35000 mm/min Max. speed: 1460 min/-1 Total power requirement: 30 kW Heidenhain digital display Additional grinding device ZS 7.5kW Swivelling clamping table via swivel gear Paper belt filter cleaning including pumps Central lubrication system Machine weight approx. 8.2t Space requirement approx. 9.5x2.6x2m

Condition: used, maximum load weight: 12,280 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2013, loading space length: 7,740 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 42 m³, total length: 10,050 mm, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2013, Equipment: ABS, * Manufacturer: Böhm * Swivel-wall body, System Kiko * Double-leaf rear door * Mounting for forklift Kjdpfx Afjzydi Hsdjnb * Equipped with a fifth-wheel coupling * 4 rows of cargo securing * Disc brakes * Fully air-suspended 2 identical trailers available, sold as is.

Condition: used, maximum load weight: 12,280 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2013, loading space length: 7,740 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 42 m³, total length: 10,050 mm, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2013, Equipment: ABS, * Manufacturer: Böhm * Swivel wall body, System Kiko * Double-leaf rear door * Forklift attachment * Drawbar coupling * 4 rows of cargo securing * Disc brakes * Fully air-suspended Kedpfozydi Tox Afdonb 2 identical trailers available, sold as is.

Year of construction: 1987, condition: used, Kehren rotary table, type RS 7C, used Manufacturer: Kehren, Honneff Item number: 4179 Year of manufacture: 1987 Control system: Siemens 3G PLC: Siemens S5 Grinding motor: BBC QUB 200 Rotary table diameter: 750 mm Grinding head diameter: 460 mm Operator panel with screen Knedpfohgmwgox Afdjb Coolant system Flushing pump Coolant pump Automatic paper band filter system Control cabinet

Condition: used, functionality: fully functional, volume flow: 250 m³/h, Used, fully functional pump unit/pump combination from Edwards, consisting of a rotary vane pump E1M40 (40 m³ pumping capacity) and a roots pump EH250 (250 m³ pumping capacity), as well as the corresponding solenoid shut-off valve. Both pumps were in combined operation until they were removed and were installed in an industrial plasma nitriding system, achieving a final pressure of approximately 20 Pa. The pumps are sold as a package. However, individual sales are also possible by arrangement. The pumps can be inspected and collected on site. Shipping via a freight forwarder is possible by arrangement and at the buyer's expense. Ksdszwdvzspfx Afdsnb Sale is subject to exclusion of liability for defects and warranty.

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: C4655, grinding length: 5,000 mm, grinding width: 500 mm, Sanding length: 5000 mm Sanding width: 500 mm Workpiece height: 250 mm spindle diameter in front bearing: 190.5 mm pivotable 0.7° Knodpfx Afsq U Ihvsdsb Max. Torque: 1771 Nm Max. speed: 593 min/-1 Feed: infinitely variable 20-35,000 mm/min Trapezoidal segment head diameter 800 mm with Trapezsegmenten: 94/103x38x200mm Marposs measuring device Hydraulic upper part clamping and swiveling Sanding mist extraction system: Hydrocyclone cleaning system Machine weight approx. 27.6 tons Space requirement approx.: 11.2 x 4.3 x 3 m

Condition: excellent (used), Year of construction: 2020, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 863/2020, total height: 2,100 mm, inner dimension length: 530 mm, inner dimension width: 320 mm, inner dimension height: 200 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, electrical fuse: 50 A, input current: 40 A, temperature: 70 °C, heating capacity: 6 kW (8.16 HP), load capacity: 40 kg, Equipment: documentation/manual, Höckh Multiclean Lean Concept III, including filling with new Safechem Dualene 1601 solvent. Everything is complete and ready for use and is sold as a complete package. The system offers options for immersion spraying, steam degreasing, and ultrasonic cleaning. Remote maintenance is prepared and only requires an internet connection. In addition to the system, the scope of delivery includes: - automatic basket feed - 3 cleaning baskets - chiller for system cooling - complete documentation The system can be inspected and tested before purchase. Ksdpfxjy Sxn Ds Afdjnb After the purchase, we will gladly assist with dismantling and loading, and can also provide a brief training session on machine operation and maintenance. The system is fully functional and in very good condition. We are selling this system because we now have a larger system in operation.

Year of construction: 1985, condition: reconditioned (used), REFORM Type AR 10, Type 40H Face grinding machine Year of manufacture: 1985 Knedpfsd E Np Esx Afdsb 30 kW grinding motor Modicon control system Magnetic control, 6 stages Magnetic size: 1000 mm x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Grinding motor feed: 0.01 mm - 0.1 mm, continuously adjustable Hydraulic oscillating drive New power cables between machine and control cabinet

Condition: new, Year of construction: 2026, ABKANTBANK-Technik KRUSE, your competent partner for bending machines. Free delivery up to 150 km. Standard equipment includes piano inserts (segment-divided upper, lower, and bending beams) for a wide range of bending options. Cassettes and special profiles with opposing bends can be easily manufactured with this model. Swivel bending machine, universally applicable for sheet metal workers, repair shops, and roofing companies. Segments can be individually moved and removed. Segmented tools on all beams allow for ample space for complex workpieces. Bending machine SGR 1250/1.5 Technical data: - max. working width: 1250 mm Knsdozuvbwopfx Afdjb Other dimensions 1000 mm and 1400 mm available upon request. - Segments: 30, 40, 50, 60, 70, 100 mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.5 mm - Weight 250 kg Option to mount a guide rail for a roller shear: 300 EUR Accessory: roller shear (up to 0.8 mm): 350 EUR All prices are subject to 19% VAT. CE certificate Warranty: 12 months. Self-collection is possible. Shipping within Germany: 220 EUR.

Condition: new, Year of construction: 2026, ABKANTBANK-Technik KRUSE, Your competent partner for bending machines. Standard equipment includes piano inserts (segment-divided upper, lower, and bending jaws) for a wide range of bending options. With this model, it is easy to produce cassettes and special profiles with opposing bends. Swivel bending machine, universally applicable for sheet metal workshops, repair shops, and roofing companies. Segments can be individually moved and removed. Knsdpfx Ajzuva Hefdob Segment bending machine SGR 1400/1.5 Technical data: - max. working width: 1400 mm Other dimensions, 1000 mm and 2050 mm, available upon request. - Segments: 30, 40, 50, 60, 70, 100 mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.5 mm - Weight: 285 kg Option to mount a guide rail for a slitting shear: 300 EUR Accessory: Slitting shear (up to 0.8 mm): 350 EUR Please note that all prices are subject to an additional 19% VAT. CE certificate Warranty: 12 months. Self-collection is possible. Shipping within Germany: 180 EUR.

Condition: new, Year of construction: 2026, BENDING BENCH technology KRUSE, YOUR competent partner when it comes to BENDING BENCHES Standard with piano inserts (segment-divided upper, lower and bending beam) for a large number of bending options Cassettes and special profiles with opposite bends are easy to produce with this model Swivel bending machine universally usable for tinsmith shops, repair shops and roofing companies Segments can be moved individually and removed Cant bench SGR 650/1.0mm Technical specifications: - maximum working width; 650mm - Bending angle max. 160° degrees - Bending beam 15mm Knsdpozuvbdefx Afdsb - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) - degree scale - passage 50mm Total length: 1000mm Height: 450mm Weight 60kg All prices are plus 19% VAT. Certificate CE Guarantee: 12 months. Pick-up is possible Shipping within Germany €100

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2013, loading space length: 7,495 mm, loading space width: 2,460 mm, loading space height: 2,100 mm, loading space volume: 39 m³, Equipment: ABS, KFB Schlumbohm & Rohde Box Body, LBW Continuous Loading System Int. No. for inquiries: 0226176 Knsdpeynu Nnjfx Afdeb * Body manufacturer: KFB Schlumbohm und Rohde * Type: Drawbar trailer * Tare weight: 5,240 kg * Box body * ABS * EBS * 2-axle, air-suspended * Mercedes axles * Aluminum underrun protection * Disc brakes * Tail lift: Palfinger * Load capacity: 2,000 kg Dimensions (cargo space/loading area) Cargo space length: 7,490 mm Cargo space width: 2,460 mm Cargo space height: 2,100 mm Tires: * Front axle: 385 / 65 R 22.5, air-suspended / 50% * Rear axle: 385 / 65 R 22.5, air-suspended / 35% Price: €4,900 + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, and…? Typographical errors, errors and prior sale are subject to change.

Condition: new, Year of construction: 2026, power: 2.2 kW (2.99 HP), ABKANTBANK-Technik KRUSE, Free delivery up to 150 km. Your competent partner for SHEARING MACHINES and BENDING MACHINES. We are your contact for high-quality sheet metal processing. If required, corresponding machines can be demonstrated, along with expert advice and professional training. We will advise you individually – tailored to your needs – and look forward to your inquiry. Sheet metal shear 3000/1.2mm, hydraulic, GLT3050 - Working length 3050mm Kedpjzdclvefx Afdsnb - Stable and robust construction for steel plates up to 1.2mm - Large cast iron worktable - Open design suitable for endless cuts - Back gauge with scale - Declaration of conformity - CE marking Dimensions: Length: 3500mm Width: 750mm Height: 1150mm Weight: approx. 1000 kg Throat: 80mm - Motor power 2.2 kW - Oil HL 46 - Pressing force 4t - Operating pressure 120-150 bar Shipping within Germany: €330 All prices are subject to 19% VAT. Self-collection is possible. Cash payment upon delivery.

Condition: not inspected (used), functionality: unexamined, We are selling a used gas console that was previously used in an Eltropuls plasma nitriding system. Included are 4 Bronkhorst mass flow controllers (MFCs) and other control electronics. We acquired these specific components as part of a package with other items, but we do not need them. Therefore, the components are offered here, untested, as a source of spare parts for interested parties. Kodpfjy Sxtgox Afdonb

Condition: used, We are selling a used platform scale here, with a maximum load capacity of 300 kg. Kedpfx Ajy Sxt Tsfdenb