Used Gerco Technik Granulat Trockner for sale (6,406)

Condition: excellent (used), Despite its age, the Gerco dryer is in exceptionally good, almost new condition. The reason for this is its very limited use: the unit was only used for two to three days per year and is therefore very well preserved. Hodpfx Asztwzijl Donr Another major advantage: with this dryer, you can directly vacuum the dried material onto the machine. This eliminates the need for additional conveying equipment on your machine. A corresponding conveying system alone would cost over €1,000 if purchased separately. With the Gerco dryer, you can save on this investment. As a result, you not only receive a very well-maintained dryer, but also a practical and cost-effective solution for material handling.

Condition: used, Year of construction: 1998, functionality: fully functional, 2 pieces vacuum drying oven GMP-compliant, Vötsch Industrietechnik (can also be sold individually). Material product-touched stainless steel 1.4435. Type of heating, externally heated hollow inserts, the ceiling is also heated, double-shelled with meander baffles inside, pressure-tight up to 3 bar. Heating via heating/cooling circuit (indirect heating using hot water) via separate DHW thermistats. Operating temperature max. 95°C, operating pressure inside tank 0 to 1 bar abs. External dimensions: 1485 mm width (housing), 2000 mm height (housing), 1700 mm depth Insert trays: 1200 mm width x 950 mm depth Number of shelves: 13 pieces Hjdsucdqnspfx Al Denr Covered area: 14.8 m2 Weight approx. 2900 kg per dryer Connections: Hot water connection (flow and return) Vacuum connection Heating of the vacuum drying ovens by means of a heating medium, e.g. water, connections at the rear. Heating of the heating medium by means of temperature control unit with control type 95-36-E Nominal voltage 400 V 3/N PE AC, 50 Hz, heating capacity of the unit 36 kW, heating capacity can be reduced to 18 kW in a definable temperature range.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20-3443, input voltage: 400 V, total width: 2,286 mm, total length: 11,994 mm, total height: 2,582 mm, temperature: -80 °C, type of input current: three-phase, cooling capacity: 12 kW (16.32 HP), input current: 63 A, ambient temperature (min.): -20 °C, input frequency: 50 Hz, ambient temperature (max.): 42 °C, For sale is a mobile, redundant, low-temperature storage unit in a container design, consisting of an antechamber with an operating temperature of -20 °C and a storage room with an adjustable temperature up to -80 °C. Technical data Storage temperature (adjustable): up to -80 °C Permissible ambient temperature: -20 °C to +42 °C Number of refrigeration circuits: 4 Sound pressure level (1 m free field): 73 dB(A) Refrigeration circuit – Stage 1 Refrigerant: R449A (GWP: 1,397) Number of compressors: 2 Compressor type: semi-hermetic reciprocating compressors, frequency-controlled Refrigeration circuit – Stage 2 Refrigerant: R508B (GWP: 13,396) Number of compressors: 2 Compressor type: semi-hermetic reciprocating compressors, frequency-controlled Condenser Number of condensers (Stage 1): 2 Heat output per condenser: 35.0 kW Fans per condenser: 2 Fan type: EC fans, speed-controlled Nominal air flow rate per condenser: 8,800 m³/h Electrical data Power consumption at operating point (total): 24.2 kW Current consumption at operating point (total): 43.9 A Recommended fuse rating: 2 × 63 A (CEE connector, redundant) Power supply: 400 V / 50 Hz / 3-phase + N Hodpfx Alezg Dtxo Denr Control system PLC: Siemens S7-1214C x 2 Operating panel: Siemens TP900 Comfort, 9 inches, 16.7 million colors x 2 Operating languages: German and English Inspection An inspection of the system is possible at our factory at any time by prior appointment. Upon request, the system can be put into operation during the inspection so that you can be convinced of its function and performance.

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 700 kg, total length: 2,860 mm, total width: 1,230 mm, construction height: 1,700 mm, Fully operational exhibition dryer, Ø 1090 mm We are offering our fully operational exhibition dryer with a diameter of 1090 mm. The unit is very compact and practical in terms of required space and easy relocation. Technical Details: Connection: only a water connection for spraying and a 16A power plug are required Heating system: 4 kW electric heater Wood moisture measurement at 3 measuring points Plug-and-play design – ready for immediate use Advantages: Ideal for small carpentry workshops Easy to transport and flexible positioning Hsdpfx Aloxbz Hrj Djnr

Condition: used, Year of construction: 1990, System for cleaning the inside of and filling kegs. Additional title: Keg cleaning and filling system Hnedpfxjzty Tbs Al Der Capacity: 30 Keg/h

Condition: used, Year of construction: 1986, Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40 - 50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet Additional title: cleaning and filling Hjdpfxeztywys Al Denr Capacity: 50 keg/h Working pressure: 7 bar Voltage: 220/380 V Frequency: 50 Hz Length: 2,0 m Width: 2,0 m Height: 2,0 m Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type Operation / Control: semiautomatic Material: stainless steel construction as frame, piping and valves as well as main mechanical parts largely made of stainless steel Features: 3 internal cleaning stations, filling station caustic tank and acid tank with pumps

Condition: good (used), Year of construction: 2009, conveyor belt length: 3,450 mm, conveyor belt width: 480 mm, discharge height: 1,150 mm, Conveyor belt Trio technology L 4 - B 04 Stock no.: 503446 Hnodpfsxa Am Dox Al Djr Machine type/ Device type: Conveyor belt Manufacturer: Trio-Technik Type: Flat conveyor belt Year of construction: 2009 Height adjustable from 400mm - 1150 mm Discharge height: 1150 Flat conveyor belt: Belt width: 480 mm Belt length: 3450 mm

Condition: good (used), Year of construction: 1996, overall weight: 1,000 kg, total length: 3,500 mm, total width: 1,000 mm, total height: 1,200 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulicbendingdriveoperatedbyhandlevervalve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hedpfxet Dk Uko Al Djnr Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max.Tube Ø: 42mm Min. Tube Ø: 6mm Max. Wall thickness:3mm Max. Bending radius:5mm Min. Bending radius:180mm Max. bending length:2000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Arm design: 270 mm Hnsdpfx Alepy Dy Es Der Power: 125 kVA

Condition: used, Year of construction: 2011, Overview This M+F KEG-Technik MICROMAT M 1/1-F KeyKeg is a semi-automatic filling machine for one-way KeyKegs, built in 2011 by M+F KEG-Technik (Bottrop, Germany) and used in a Belgian brewery. Hsdpfjzrihxox Al Dsnr The machine fills 20 l and 30 l KeyKegs at 50-60 kegs per hour. It became redundant when the brewery switched its production from one-way KeyKegs back to returnable stainless steel kegs. It has already been dismantled, is in storage and can be inspected on request. Technical data - Manufacturer: M+F KEG-Technik - Model: MICROMAT M 1/1-F KeyKeg - Year of manufacture: 2011 - Machine type: semi-automatic KeyKEG filling machine - Capacity: 50-60 KeyKegs per hour - Container formats: 20 l and 30 l KeyKEG - Fitting type: KeyKEG fitting - Connection voltage: 230/400 V, 50 Hz Equipment - EC Declaration of Conformity (Machinery Directive 2006/42/EC) - Technical documentation Condition Used. The machine has already been dismantled and is stored. Availability Immediately available. Location: Belgium. Handling and truck loading are included.

Condition: used, Year of construction: 1998, 1 unit multi-chamber desiccant air dryer, GERCO TTM4/50 Color: as shown in the images, corresponding to the images and inspection Hnsdpfx Ajzqci Tjl Dor Year of manufacture: 1998 Condition: used

Condition: used, Z-conveyor, inclined conveyor, elevating conveyor, steep-angle conveyor, conveyor belt MTF technology, type NL-LD 120 Machine no.: 27238, Year of manufacture: 2014 Conveyor speed: 6 m/min Conveyor height: approx. 1800 mm (lower edge of conveyor belt) Conveyor width: 410 mm Hnsdpfx Aljzqvwdo Dsr Carrier spacing: every 300 mm Carrier height: 20 mm Motor power: approx. 0.18 kW Power connection: 400 volts, 50 Hz - Drive via SEW geared motor with chain - Conveyor incline continuously adjustable - Rubber conveyor belt with conveyor vane (carrier) and lateral wave edge - Cover plates removable - Discharge side with funnel, Ø 390 mm - Mobile on 4 swivel casters Space requirement L x W x H: 4500 x 950 x 2150 mm Weight: 280 kg Good condition

Condition: used, Z-conveyor, inclined conveyor, rising conveyor, steep conveyor, conveyor belt MTF technology, type NL-LD 120 Machine No.: 27237 Year of manufacture: 2014 Conveyor speed: 6 m/min. Conveyor height: approx. 1800 mm (lower edge of the conveyor belt) Conveyor width: 410 mm Lug spacing: 300 mm Lug height: 20 mm Motor power: approx. 0.18 kW Power connection: 400 volts, 50 Hz - Drive via SEW geared motor with chain - Conveyor incline continuously adjustable - Rubber conveyor belt with conveyor lugs and lateral wave edge - Cover plates removable - Discharge side with funnel, Ø 390 mm - Mobile on 4 swivel casters Space required L x W x H: 4500 x 950 x 2150 mm Hedpfx Ajzqvv Tjl Djnr Weight: 280 kg Good condition

Year of construction: 2016, condition: excellent (used), functionality: fully functional, LANG Eco Tower 60 in like-new condition, consisting of: Hedpfxjztvgqs Al Dsnr 1 × ECO TOWER 60 component loading tower, year of manufacture 2016 1 × ECO FEED component loading system, year of manufacture 2016 30 × Macro Grip vises 1 × LANG Quick-Point automated clamping tower This automation system can be easily integrated with any CNC milling machine and is available immediately! Capacity up to 60 vises!! Inspection possible at any time!

Condition: ready for operation (used), Year of construction: 2014, A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Hsdpfx Asy Eg Dysl Djnr

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Hnodpfsrc Hiiex Al Dor

Condition: used, Year of construction: 1996, functionality: fully functional, conveyor belt length: 10,370 mm, conveyor belt width: 650 mm, conveyor belt speed: 600 mm/s, total length: 10,400 mm, total width: 820 mm, total height: 300 mm, overall weight: 200 kg, power: 0.75 kW (1.02 HP), input voltage: 220 V, input frequency: 50 Hz, input current: 2 A, motor manufacturer: LENZE, Manufacturer: Combi-Staufner-Technik-GmbH Year of manufacture: 1996 Overall dimensions (L x W x H) in mm: 10,400 x 820 x 300 Width including sidewall in mm: 720 Width including drive in mm: 820 Side rail height in mm: 105 Conveyor length in mm: 10,370 Conveyor width in mm: 650 Hodpfszun Ddsx Al Denr Belt type: PVC, smooth Belt width in mm: 650 Running surface: Sheet metal Drive: Head drive Motor type: Geared motor Motor manufacturer: Lenze Motor specifications: 0.75 kW, 50 Hz, 2–3.5 A, 220–480 V Motor position (in conveying direction): left Conveying speed in m/s: 0.6 Net weight in kg: 200 Condition: used / fully functional Functional test: OK

Condition: used, Year of construction: 1996, functionality: fully functional, conveyor belt length: 10,800 mm, conveyor belt width: 600 mm, conveyor belt speed: 750 mm/s, total length: 10,800 mm, total width: 850 mm, total height: 370 mm, overall weight: 350 kg, power: 0.75 kW (1.02 HP), input frequency: 50 Hz, motor manufacturer: LENZE, Manufacturer: Combi-Staufner-Technik Year of manufacture: 1996 Overall dimensions (L x W x H) in mm: 10,800 x 850 x 370 Width including side rail in mm: 720 Width including drive in mm: 850 Side rail height in mm: 140 Hnsdpfxozunuio Al Der Conveyor length in mm: 10,800 Conveyor width in mm: 600 Belt type: PVC, textured Belt width in mm: 600 Support structure: None (available as an option) Running surface: Steel Drive: Head drive Motor type: Geared motor Motor specifications: LENZE, 0.75 kW, 50/60 Hz Motor position: Right side in the direction of conveyance Conveyor speed in m/s: 0.75 Net weight in kg: 350 Special features: Condition: used / fully functional Functional test: OK

Condition: excellent (used), functionality: fully functional, total length: 160 mm, total width: 30 mm, overall weight: 70 kg, type of input current: three-phase, Dimensions of the treadmill belt: Length: 160 cm Hnodpfeztfnqjx Al Der Width: 30 cm Speed control

Condition: excellent (used), Weiss Technik SaltEvent Type: SaltEvent SC/UKWT 1500 Year of manufacture: 2022 Recirculating corrosion cyclic test unit / salt spray test unit For sale is a high-quality Weiss Technik SaltEvent SC/UKWT 1500 for corrosion, salt spray, condensation, and climate change testing. The unit is suitable for use in industry, research, development, and quality assurance. Technical data: Manufacturer: Weiss Technik GmbH Type: SaltEvent SC/UKWT 1500, with ring rinsing line Year of manufacture: 2022 Test chamber volume: approx. 1450 liters Temperature / climate data: Temperature range, climate testing: +23°C to +70°C Humidity range: 20% to 98% relative humidity Dew point range: +12°C to +69°C Salt spray test: ambient temperature +5 K to +50°C Condensation test: ambient temperature +5 K to +42°C Electrical data: Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: 9.8 kW Rated current: 18 A Refrigerant according to nameplate: R134a – 1.30 kg – GWP 1430 CO2 equivalent: 1.86 t ND max.: 17 bar g HD max.: 25 bar g Media connections: Compressed air / GN2: max. 12 bar Demineralized water: min. 3 bar / max. 5 bar Water connection for ring rinsing line: max. 6 bar Condensate drain available Exhaust connection available Mains connection: 3/N/PE 400 V / 50 Hz Dimensions according to drawing: External dimensions approx.: 3710 x 1537 x 1769 mm Test chamber length approx.: 2365 mm Insertion height approx.: 850 mm Weight according to nameplate: approx. 710 kg Equipment / features: S!MPAC / Webseason touch control panel Ethernet / network connection USB interface Salt spraying Condensation test Dry climate Climate / humidity operation Ring rinsing line Reservoir Insertion rods / Rod inserts Control cabinet integrated Exhaust connection Compressed air connection Connection for demineralized water Water connection for ring rinsing line Condition Used Optical condition according to the pictures Normal storage and usage marks present Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1500 Hnodpfxoy Hkg Is Al Der Scope of delivery as shown in the pictures Inspection possible by arrangement. Loading can be arranged. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), functionality: fully functional, 5 Koch separator feeders from a cleanroom production. Only PP without glass fibers was used! The devices are in like-new condition. One device has an additional vacuum discharge valve. 4 machine hoppers. The original new price was approximately €14,500. Hnedpfx Aexdfxwsl Djr Total price: €4,900.

Condition: excellent (used), total length: 1,350 mm, total width: 320 mm, overall weight: 30 kg, Flat belt conveyor with adjustable speed, suitable for universal applications. Dimensions: Length 135 cm, belt width 32 cm. Hjdpjzubcgjfx Al Donr

Condition: excellent (used), Year of construction: 2021, Silos 120 x 120 x 141 cm [L x W x H] with a capacity of approx. 1000 l complete with Koch Technik plastic feeders for the central system, 3 pcs. 2008, 2010, 2021. Hnedpfozl Szujx Al Djr

Condition: used, Year of construction: 2018, power: 29.5 kW (40.11 HP), overall weight: 2,160 kg, Due to internal restructuring, we are offering the following machine from our inventory for sale: Description: HDD drilling rig Machine type: Grundodrill 4X Serial number: 4X1826295M Year of manufacture: 2018 Weight: 2,160 kg Engine power: 29.5 kW Maximum operating pressure: 310 bar Hodsy Nmffjpfx Al Dsnr Length: 3,500 mm Width: 1,200 mm Height: 1,710 mm Maintenance and service were recently carried out by TRACTO. The unit is in working condition. Interested parties are welcome to submit their price expectations or make an offer. If you have any questions or require further information, please send us a message or give us a call.

Condition: used, maximum load weight: 2,735 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,260 mm, loading space width: 2,040 mm, total width: 2,100 mm, total height: 990 mm, A23 GW26M0147488 Hsdpfx Alsy S Nkpj Denr High-loader with manually operated hand winch (removable), fitted with overrun brake, wooden floor plate, rear drop-leg supports (accessory), 2 loading ramps behind the license plate... and many more features. Subject to errors and prior sale.