Used Gm Arcade Bottle Cleaning Machine for sale (68,578)

Year of construction: 2024, condition: ready for operation (used), Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible. Kodpfx Aswb E S Iedlodt

Condition: used, Year of construction: 2007, Cleaning machine, manufacturer GM Gera, model: Arcade GEK2.1RV1, for 4,000 bottles/hour, 9 bottles/row, for 0.5 l NRW bottle, cell pitch 95mm, with pre-diverter, caustic bath 1+2, hot water bath 1+2, cold and fresh water spraying. Contact us for further information. Kdjdpsxghnaefx Adljt

Condition: used, Year of construction: 2003, Cleaning machine, manufacturer: GM Gera, type: Arcade, for 24,000 bottles/h, adjustable range 7,600 – 26,400 bottles/h 25 bottles/row Kdodpfx Adeyzdq Nelet basket pitch 95 mm, chain pitch 140 mm with Siemens S7 control system dismantled, available for inspection at warehouse

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: - Capacity: 9,500 bph - Cell Pitch: 95 mm - Bottles per row: 25 - Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - YOM 2024 - Formats: - 0,25l Kdedpfovrfivox Adljt - 0,33l - 0,5l - 0,75l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Kdjdpfx Ast Ul Exsdlst

Year of construction: 1993, condition: used, Bottle washing machine Nagema GM Arcade Year of construction 1993 Output 23,000 bph Additional title: Single-ended machine Kedpjvcqgzjfx Adlodt Capacity: 21000 bo/h Bottles each row: 16 bo/row Length: 8,64 m Width: 4,47 m Height: 1,92 m Weight: 17900 kg Formats: 0,5 l NRW-Bottle Features: Heated by steam; smoke suction; insertion sieves; caustic settling tank Periphery: S5 controll (HMI Lauer)

Condition: used, Year of construction: 2005, Overview The bottle washer was previously used in a mineral water factory. Due to the good maintenance, the machine is in good condition. All basins and the machine body are made of stainless steel. The machine is still working and will be free in early 2027, when the complete line is replaced. Tech Specs - Capacity: 15,500 bph - Cell Pitch: 95mm - Bottles per row: 16 Ksdpfxjzbha Hj Adlodt - Dimensions + Weights: Housing: 8350 x 1,860 x 2,990 mm / 21,750kg Ready for operation with attachments: 8,700 x 3,560 x 3,330mm / 37,639kg - YOM 2005 - Formats: - 0,5l - 0,75l The Machine in Detail / Equipment Features - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Label press mounted to the machine - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: - Capacity: 6,700 bph - Cell Pitch: 102 mm - Bottles per row: 10 - Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg - YOM 1999 - Formats: - 0,33l - 0,5l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship Kdedpewg E D Iefx Adlst - Automated machine Startup

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Kdjdpfxsxxb Rrs Adlst Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Kodjl Hx Adopfx Adlsdt

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Kdsdpfxox D Tbmo Adlot Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2025, Technical Specifications: Laser Power: 2kW Laser Type: Continuous Fiber Laser Laser Source: MAX Adjustable Cleaning Length: 0 – 300 mm Approximate Cleaning Speed: 10 – 60 m2/hour Laser Wavelength: 1070 nm Output Power Stability: ± 2% Laser Cooling System: Included (with antifreeze) Power Supply: 220V 50Hz Kodezkkc Uepfx Adljdt Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 – 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 10 m Machine Dimensions (L x W x H): 1,000 x 650 x 950 mm Weight: 230 kg CE Certification: Included

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Complete craft beer bottling line: Cime Careddu GOLD DPS 6/6/1 rotary triblock (rinser – isobaric filler with double pre-evacuation – crown capper) and matching Compatta self-adhesive labeler. Both manufactured in 2018, installed in 2019 by Coenco (official Cime Careddu agent for the Benelux), professionally maintained, with low operating hours. Available immediately from a brewery in Dokkum, the Netherlands, due to production shutdown. Kedpjzza Risfx Adledt 1. Triblock – Cime Careddu GOLD DPS 6/6/1 CROWN Type: rotary triblock (rinser – isobaric filler – crown capper) in stainless steel Year of manufacture: 2018 (serial no. 708) Rinser: 6 grippers, water rinse Filler: 6 isobaric (counter-pressure) filling valves with double pre-evacuation (DPS) and CO₂ pressurization for low dissolved oxygen Capper: 1 head for 26 mm crown caps, with crown feeder Capacity: approx. 1,000–1,200 bottles/hour (33 cl) Bottle formats included: [e.g. 33 cl longneck Ø 60 mm, 33 cl Steinie Ø 69 mm, 75 cl Ø 85 mm – fill in] CIP: cleaning-in-place connections for internal and external sterilization Electrical: 400 V / 50 Hz / 3-phase + N Operating hours: approx. [xxx] hours (approx. [xxx,xxx] bottles filled) CE certified, safety guarding fitted 2. Labeler – Cime Careddu / ENOS Compatta Type: linear self-adhesive labeling machine, one label station (front or wrap-around label) Year of manufacture: 2018 (serial no. 720) Capacity: up to approx. 1,800 bottles/hour Electrical: 400 V / 50 Hz / 3-phase + N Manual station adjustment, suitable for round bottles from 25 to 75 cl

Year of construction: 2018, condition: used, A washing machine for cleaning glass bottles prior to beverage filling. The soiled empty bottles are loaded into bottle baskets and pass through the system for approximately 14 minutes. First, the bottles pass through a pre-soaking bath and a lye bath in the lower section, and are then rinsed in the upper section with lye, twice with hot water, cold water and finally fresh water. The cleaned bottles are discharged onto the bottle conveyor above the bottle inlet. Additional title: single-ended machine for cleaning glass bottles Nominal capacity: 33000 Fl/h ; mechanical control range: 13.200 - 36.000 Fl/h Number of basket holders: 269 pcs. ; of which 259 were filled – total number of bottles: 7.770 pcs. Processing time: 14,14 min Heating / Cooling: 1.352.712 kJ/h Water: 7,92 m3/h Formats: 0,5 l NRW bottles Material: housing from stainless steel Position: in a cabinet on legs with an enlarged surface area Kdsdpfx Ajzizyzodljt Base construction: sinle-ended machine Features: pre-soaking and lye baths; spray nozzles; bottle conveyor with drives; pumps; top surface serving as a work platform with guardrails; housing; control cabinet; touchscreen display serving as an HMI panel

Year of construction: 2007, condition: ready for operation (used), A GM Gera bottle cleaning system is available. Throughput capacity with 1l PET bottles: 13000 bottles/h, bottle cells: 3240 pieces, cells per basket row: 18, cell pitch: 110mm, chain pitch: 169mm, total treatment time: approx. 15min, total immersion time: approx. 7.5min, housing material: stainless steel (SST). System dimensions X/Y/Z: approx. 8900mm/4200mm/3350mm, weight: approx. 23650kg, operating hours (09.2025): approx. 14300h. Documentation available. An on-site inspection is possible. Expected to be available from mid-March 2026. Kjdpfx Ajxfbczjdlodt

Year of construction: 2007, condition: used, A single-ended machine for cleaning glass bottles, with labels removed via a chain. The cleaning solution is steam-heated. Additional title: Single-ended machine Capacity: 17000 bo/h Weight: 26400 kg Machine partitioning: chain division: 110 mm Kdodozg I Efjpfx Adljt Operation / Control: Simatic S7

Year of construction: 2010, condition: excellent (used), machine/vehicle number: 09942, Mercerizing machine No.: 09942 Year of production: 2010 Manufacturer: Goller Textilmaschinen GmbH Am Hammeranger 1 95126 Schwarzenbach/Saale GERMANY The machine is used for mercerizing cotton fabrics (knitted fabrics) with caustic soda solution in three stages: treatment with alkaline solution, washing (stabilization) and rinsing (neutralization). Kedpfjyhn A Ijx Adledt

Condition: good (used), Fountain industrial bagging machine, suitable for the automated weighing and packing of fresh produce and other food products into bags. Kdjdpfxjzzzm Ej Adlst Designed for use within a commercial food-processing/packing environment and suitable for integration with an upstream weighing or feeding system.

Condition: used, functionality: fully functional, SCH-BT/300S Bottle Washing, Filling and Capping Machine The SCH-BT/300S is a fully automated machine designed for washing, disinfecting, rinsing, filling, and capping 18.9-liter (5-gallon) water bottles. The system integrates a multi-stage cleaning process with automated bottle handling, filling, and cap application, ensuring high hygiene standards and reliable operation for bottled water production. Technical Specifications * Capacity: 200–300 bottles/hour (depending on washing cycle settings) * Washing Time: Adjustable from 40 to 120 seconds * Bottle Size: Standard 18.9 L (5-gallon) bottles * Power Supply: 400 V, 50 Hz * Installed Power: 9 kW * Compressed Air Requirement: 800 L/h, 6 bar, oil-free * Water Supply Requirement: 5,000 L/h, 1" connection, 2–4 bar pressure * Weight: Approx. 800–1000 kg * Minimum Installation Area: 7 m × 3 m Kdsdpfx Aezb Rmvedljt The machine is suitable for small and medium-sized bottled water production facilities requiring efficient and hygienic bottle processing.

Year of construction: 2016, condition: ready for operation (used), A GMS stencil cleaner for the PCB industry is available. Drip pan external dimensions X/Y/Z: approx. 1420mm/1150mm/50mm, max. cleaning tank volume: 65l, max. stencil dimensions X/Y/Z: 755mm/755mm/40mm, extraction nozzle diameter: 100mm, air volume flow: 200m³/h. Machine dimensions X/Y/Z: approx. 1400mm/750mm/1100mm, weight: approx. 140kg. Documentation available. An on-site inspection is possible. Kjdpfsxd Awdex Adljdt

Condition: like new (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 105-337, Machine for cleaning the corners of PVC profiles. Kodpfozdqagjx Adlodt

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Kjdpfxsx E Rd Do Adlsdt Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Condition: good (used), Year of construction: 2007, power: 9.1 kW (12.37 HP), Manufacturer: Ilsa Multimatic Type: Topline 320 Designation: Cleaning machine Distillation module: VD160 Tank volume: 320 L Kjdpfx Asw I Ddhodlsdt Spin speed: 550 rpm Power: 9.1 kW Year of manufacture: 2007

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1407, total width: 2,500 mm, total length: 2,710 mm, total height: 3,000 mm, overall weight: 10,000 kg, maximum load weight: 330 kg, loading space volume: 3.3 m³, air pressure: 7 bar, Tonello 330 HS Industrial Garment Washing & Dyeing Machine (re-controlled 2014) Large-Capacity 3300 L Industrial Garment Wet-Processing Machine with B&R Touchscreen Control The Tonello 330 HS is a large-capacity industrial garment washing and wet-processing machine manufactured by Tonello S.r.l. (Sarcedo, Italy), the leading garment-finishing technology brand. The 330 class (3300 L drum) handles industrial washing, dyeing, softening, bleaching and stone-wash / enzyme effects on denim and garments at production scale. This unit (MASI in-house reference "Pesumasin No 3") was in professional denim-finishing production until factory shutdown. The machine body dates from 2000 and the complete electrical control system was rebuilt in 2014 with a new Tonello / B&R panel. Technical Specifications • Manufacturer: Tonello S.r.l. (Italy) • Model: G1 330 HS • Serial / Matricola: 1407 • Year: machine 2000 / electrical control rebuilt 2014 • Basket / Drum Volume: 3300 L • Power Supply: 380–400 V, 3-phase + GND, 50 Hz • Installed Power: 27 kW (machine plate) / 14 kW (2014 control plate) • Air Pressure: 7 bar · Max Steam Pressure: 3 bar · Hydraulic Pressure: 10 bar • Weight: 10,000 kg • Supply Cable: 25 mm² • Country of Manufacture: Italy Key Features • Large 3300 L stainless drum for high-capacity garment wet processing • B&R Power Panel 300 touchscreen HMI (rebuilt 2014) with programmable cycles • Yaskawa Varispeed 616G5 variable-frequency drum drive • Mettler Toledo weighing controller and Siemens Sitrans flow metering • Automatic chemical dosing system • Steam, water, air and hydraulic services • Front loading door with sight glass Includes • Tonello 330 HS washing machine with stainless drum • B&R touchscreen control cabinet and pushbutton console • Yaskawa VFD and PLC electrical cabinet • Chemical dosing system, pumps and instrumentation Applications • Industrial denim and garment washing • Garment dyeing and over-dyeing • Softening, bleaching, enzyme and stone-wash effects • High-volume garment wet processing Condition • Working — main machine functional (per factory records) • Previously in professional denim-finishing production (MASI "Pesumasin No 3") • Machine from 2000 with 2014 electrical-control rebuild • Typical wear/dust from a wet-processing environment Kodpfszmt S Dox Adledt • Available for inspection under working conditions before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional rigging required (heavy industrial machine, ~10 t). Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation. Part of the Tonello industrial laundry line (available individually or as a complete line).

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1406, total width: 2,500 mm, total length: 2,710 mm, total height: 3,000 mm, overall weight: 10,000 kg, maximum load weight: 330 kg, loading space volume: 3.3 m³, air pressure: 7 bar, Tonello 330 HS Industrial Garment Washing & Dyeing Machine Large-Capacity 3300 L Industrial Garment Wet-Processing Machine with B&R Touchscreen Control The Tonello 330 HS is a large-capacity industrial garment washing and wet-processing machine manufactured by Tonello S.r.l. (Sarcedo, Italy), the leading garment-finishing technology brand. The 330 class (3300 L drum) handles industrial washing, dyeing, softening, bleaching and stone-wash / enzyme effects on denim and garments at production scale. This unit (MASI in-house reference "Pesumasin No 3") was in professional denim-finishing production until factory shutdown. The machine body dates from 2000 and the complete electrical control system was rebuilt in 2014 with a new Tonello / B&R panel. Technical Specifications • Manufacturer: Tonello S.r.l. (Italy) • Model: G1 330 HS • Serial / Matricola: 1407 • Year: machine 2000 / electrical control rebuilt 2014 Kdedpfx Aezmvgwodljt • Basket / Drum Volume: 3300 L • Power Supply: 380–400 V, 3-phase + GND, 50 Hz • Installed Power: 27 kW (machine plate) / 14 kW (2014 control plate) • Air Pressure: 7 bar · Max Steam Pressure: 3 bar · Hydraulic Pressure: 10 bar • Weight: 10,000 kg • Supply Cable: 25 mm² • Country of Manufacture: Italy Key Features • Large 3300 L stainless drum for high-capacity garment wet processing • B&R Power Panel 300 touchscreen HMI (rebuilt 2014) with programmable cycles • Yaskawa Varispeed 616G5 variable-frequency drum drive • Mettler Toledo weighing controller and Siemens Sitrans flow metering • Automatic chemical dosing system • Steam, water, air and hydraulic services • Front loading door with sight glass Includes • Tonello 330 HS washing machine with stainless drum • B&R touchscreen control cabinet and pushbutton console • Yaskawa VFD and PLC electrical cabinet • Chemical dosing system, pumps and instrumentation Applications • Industrial denim and garment washing • Garment dyeing and over-dyeing • Softening, bleaching, enzyme and stone-wash effects • High-volume garment wet processing Condition • Working — main machine functional (per factory records) • Video recorded 19.3.2026 • Previously in professional denim-finishing production (MASI "Pesumasin No 2") • Machine from 2000 with 2014 electrical-control rebuild • Typical wear/dust from a wet-processing environment • Available for inspection under working conditions before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation. Part of the Tonello industrial laundry line (available individually or as a complete line).