Used Graco Paint Finishing System for sale (43,027)

Condition: used, Year of construction: 2015, machine/vehicle number: 315031/02, working width: 1,800 mm, workpiece length (max.): 3,000 mm, workpiece height (max.): 25 mm, TECHNICAL DETAILS Workpiece dimensions Maximum length: 3,000 mm Minimum length: 400 mm Maximum width: 1,800 mm Minimum width: 200 mm Maximum thickness: 25 mm Minimum thickness: 3 mm Maximum deflection: 1 mm Maximum paper roll diameter: 500 mm Paper web width: 1,980 mm Maximum working width: 1,800 mm MACHINE DETAILS Minimum temperature: -5 °C Operating speed: 0.8–2 m/min Voltage: 400 V Frequency: 50 Hz Kodpfezypm Dox Adlsdt Pressure: max. 6 bar EQUIPMENT Roller conveyor TVR18/2000 Working width: 1,800 mm Speed: 0.35–6.1 m/min Roller diameter: 66 mm Roller spacing: 125 mm

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, 1. MERKUR Airless Pump 45:1 Ratio: 45:1 Maximum fluid output pressure: 310 bar Maximum air inlet pressure: 6.2 bar Fluid flow at 60 cpm: 3 lpm Volume per cycle: 50 cc Air consumption at 7 bar and 20 cpm: 0.48 m³/min Fluid inlet: ¾” Fluid outlet: 3/8” Includes: wall mount, surge filter, suction hose, suction pipe, suction filter. 2. XTR 5 Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid passage: 2.3 mm Kdodpfx Aeyx Irlsdljt Fluid inlet: ¼” Weight: 411 g Dimensions: length 111 mm x height 180 mm Wetted parts: aluminium, stainless steel, polyethylene, polyurethane, polypropylene, nylon, acetal, carbide, solvent-resistant O-rings. 3. Mini Merkur Airless 30:1 Ratio: 30:1 Maximum operating pressure: 207 bar Maximum tip size: 0.019” Fluid flow at 240 cpm: 1.5 lpm Air inlet: 3/8” Fluid outlet: ¼” Minimum compressor capacity: 1.5 HP Includes: wall mount, suction hose, suction pipe, suction filter. Key advantages: convertible wall mounting, pneumatic motor, consistent finishes, low air and material/solvent consumption. 4. Silver Plus Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid inlet: ¼” Weight: 510 g Wetted parts: stainless steel, polyethylene, polyurethane, nylon, Teflon. 5. Product Hoses with Stainless Steel Braid Braid: AISI 304 Inner tube: Teflon Applications: chemicals, solvents, steam. Length: 10 metres Diameter: ¼"

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 24F104, Graco PROMIX 2KE – Demonstration unit, fully functional For sale is a used, fully functional Graco PROMIX 2KE, 30:1 pump ratio, IS, AA, from our demonstration stock. Manufacturer: Graco Designation: PROMIX 2KE, 30:1 pump ratio, IS, AA Article No.: 24F104 Condition: used, fully functional, demonstration unit Offered for sale as part of a stock clearance. This is a great opportunity to acquire a proven, little-used Graco system at attractive conditions. We will be happy to assist you with any questions. Kdsdpfxozwk H Hs Adlst

Condition: like new (used), functionality: fully functional, machine/vehicle number: 25C862, SHIPPING AVAILABLE 🚚 - Brand: Graco - Reference: 25C862-OC - UPC Code: 00755652654278 - General industry - sealants, adhesives, silicones - Application: Beading and encapsulation Kdjdpfx Aoza Utqsdlot - Maximum flow rate: 9 L/min - Maximum working pressure: 207 bar - Air inlet: 1/2" - Mixing ratio 1:1 - Pressure ratio 36:1 - For 20 L drums - Second-hand product, fully inspected

Condition: good (used), Year of construction: 1989, functionality: fully functional, Equipment: cabin, Manufacturer: Garmat Belgium Type: M 6/7A Year of manufacture: 07/1989 Work area volume: 70.5 m³ Fan capacity: 24,000 m³/hour Motor power: 7.5 kW Gas burner: 200 kW Total electrical connection value: 14 kW Operating voltage: 380/220 V The 24,000 m³/hour and 200 kW gas burner make this a serious, professional booth, not a hobby version. Fully functional; Burner and fan are operating; Filter system is complete; No significant rust damage. Internal length: approximately 6.70 m Internal width: approximately 4.0 m Internal height: approximately 2.5 m. The dimensions are approximate. External dimensions: 6.85 x 600 x 310 (approx.) Kjdpjzcfp Iofx Adledt The booth can be inspected, and it must be dismantled by the buyer. We will arrange for a forklift to load it.

Condition: like new (used), functionality: fully functional, machine/vehicle number: MD1001, total height: 150 mm, total length: 45 mm, total width: 52 mm, overall weight: 50 kg, PROMIX 2KS MIXER, 1 COLOR + 1 CATALYST + 1 AIR + SOLVENT SHIPPING AVAILABLE 🚚 -Brand: Graco -Reference: MD1001 -UPC Code: 633955370647 -General Industry: Paints and Glues -Application: Two-component paints, solvent and water, glues, varnishes, lacquers. Kodpewp Slksfx Adledt -Mixing close to the guns for greater control -Compatible with solvent- and water-based epoxies and polyurethanes -Mixing ratio up to 30:1 -Pressure: 275.6 bar (4000 psi) -Pre-owned, fully inspected -Warranty: 1 year -OPTIONAL: COLOR AND CATALYST CHANGE WITH CONTROL (PRICE ON REQUEST)

Condition: new, total height: 31 mm, total length: 46 mm, total width: 37 mm, overall weight: 23 kg, HIGH-PRESSURE PAINT HEATER, ATEX COMPLIANT, VISCOUNT 2 - Brand: GRACO - REF. 245863 - 123 - Viscount 2 Graco, 220 V, 276 bar, 250°C, EEX compliant. - Suitable for general industry, metal, and wood applications. - NEW, UNUSED PRODUCT Kdsdpfx Aezy U Slodlet - VAT not included.

Condition: new, functionality: fully functional, machine/vehicle number: G30W55, overall weight: 34 kg, operating pressure: 207 bar, compressed air connection: 7 bar, 30:1 Merkur pump: - Wall-mounted - Includes suction hose, material filter - Permissible material operating pressure: 207 bar - Max. material flow rate: 4.5 l/min. Kdsdpfx Adezwb Hwjljt Graco spray guns in our clearance sale: We need space and are therefore offering this and other selected Graco Merkur pumps at particularly attractive clearance prices. If you are interested, we will be happy to assist you.

Condition: new, functionality: fully functional, machine/vehicle number: G30C25, overall weight: 33 kg, operating pressure: 207 bar, compressed air connection: 7 bar, Air-assisted 30:1 Merkur complete system: - Incl. Airmix gun PerformAA 50 - Chassis mounting - Incl. gun-air-material hose, material filter - Permissible material operating pressure: 207 bar Ksdpszv S T Ejfx Adlodt - Max. air inlet pressure: 7 bar - Max. material flow rate: 1.5 l/min. Graco spray guns in our clearance sale: We need space and are therefore offering this and other selected Graco Merkur pumps at particularly attractive clearance prices. If you are interested, we will be happy to assist you.

Condition: new, functionality: fully functional, machine/vehicle number: G36W05, overall weight: 39 kg, operating pressure: 248 bar, compressed air connection: 7 bar, 36:1 Merkur pump: - Wall-mounted - Includes suction hose, material filter - Permissible material operating pressure: 248 bar - Max. material flow rate: 6 l/min. Kdodpfezwb Nrjx Adlot Graco spray guns in our clearance sale: We need space and are therefore offering this and other selected Graco Merkur pumps at particularly attractive clearance prices. If you are interested, we will be happy to assist you.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 050.940-08, LUTRO Painting and Drying System – 2 Booths + Dryer – Year of Construction 2008 Price: €24,900 (negotiable) net Dismantling and removal to be carried out by the buyer For sale is a comprehensive LUTRO painting and drying system for professional/industrial use. The system was manufactured in 2008 by LUTRO Luft- und Trockentechnik GmbH and, according to the available nameplates, consists of two booths and one dryer. The system also includes the existing ventilation/filtration system, heating/burner technology, and the electrical control system with a Siemens SIMATIC touch panel. The system is currently still assembled on-site. This allows a prospective buyer to gain a good impression of the layout, components, and scope of the system before purchase. System components: 1. LUTRO KSP 7 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 7 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 127 m³ Connected power according to nameplate: 7.5 kW Air velocity: 0.24 m/s Air flow rate: 24,000 m³/h Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,713 g Maximum permissible solvent quantity during spray operation: 80,000 g/h 2. LUTRO KSP 8 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 8 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.5 m Max. component width: 3.5 m Max. component height: 2.5 m Max. wheel load: 1,000 kg Usable volume: 122 m³ Total steam volume: 178 m³ Connected power according to nameplate: 11 kW Air velocity: 0.23 m/s Kjdpfxozwvb Aj Adledt Air flow rate: 30,000 m³/h Minimum exhaust air volume flow: 1,800 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 2,321 g Maximum permissible solvent quantity during spray operation: 100,000 g/h 3. LUTRO TR 1 Dryer Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: TR 1 Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 107 m³ Connected power according to nameplate: 4 kW Air velocity: 0.15 m/s Air flow rate: 15,000 m³/h Minimum exhaust air volume flow: 900 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,307 g Maximum permissible solvent quantity during spray operation: 50,000 g/h Equipment / existing components Based on a visual assessment, the system includes, among other things: 2 LUTRO booths 1 LUTRO dryer Large-area floor extraction with grating Ceiling filter/supply air system Supply and exhaust air technology Ventilation units Heating/burner technology Air ducts Electrical switch cabinets LUTRO system control Siemens SIMATIC touch panel Booth doors and personnel doors with viewing windows Lighting and other existing system equipment In principle, the system scope present on-site will be sold. Condition The system is in used condition, reflecting its age, and is currently still assembled. Important note regarding dismantling and transport Dismantling is not included in the purchase price. Price €24,900 (negotiable) net Inspection / further information An inspection of the system is possibl

Condition: good (used), Paint unit, paint pump GRACO MERKUR + Graco G40 gun. Kdodeulc S Rspfx Adlst

Condition: new, Year of construction: 2026, An open-type industrial booth engineered for efficient air extraction and ventilation in professional and industrial environments. The unit features overall dimensions of 1269 × 1367 × 2379 mm and is equipped with an electric motor rated at 1.1 kW operating at 2800 rpm. Air movement is provided by a Ø315 mm impeller, delivering an airflow capacity of 2600 m³/h. The booth is designed for reliable continuous operation, ensuring stable airflow performance and effective extraction, making it suitable for industrial applications that require controlled ventilation and air handling. Kdedpfxoyghnne Adlot

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, paper weight (min.): 65 g/m², paper weight (max.): 300 g/m², product length (max.): 320 mm, product width (max.): 620 mm, TECHNICAL DETAILS Minimum paper size: 120 × 210 mm Maximum paper size: 320 × 620 mm Paper weight: 65–300 g/m² Booklet heads: 2 ISP booklet heads Maximum book thickness: 10 mm Maximum page count: approx. 200 pages at 80 g/m² Staples per spool: approx. 50,000 EQUIPMENT Plockmatic Morgana BM 5050s Booklet Maker Kdsdszzp Scopfx Adlet VFX high-performance feeder with vacuum feeder CST 5000 creasing and 2-sided trimming module for head and foot trimming FM 5000 finishing module for front trimming BEST 4000-1 extended conveyor stacker Anti-static kit for VFX feeder Anti-static kit for CST 5000

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: Kdjdpfszubtlox Adlst • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: MKR30029343, MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Power: 6.2 kW Kedpfxey Tn Rke Adljdt FEATURES CE marking MAKOR unloader is not included in the scope of supply.

Condition: new, Year of construction: 2027, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Kjdpovv Rfksfx Adljdt Contact us for more information and quotations

Condition: used, Year of construction: 2007, functionality: fully functional, total height: 2,900 mm, total length: 1,100 mm, total width: 3,150 mm, working width: 3,000 mm, Manufacturer: Heimer Kedpfxozlrrme Adlsdt Model: TSW-R 22-22 Year of manufacture: 2007 General / technical data: Used spray booth with dry filter technology (TSW). The spray booth has a modular design and can be connected to an exhaust unit. The filter mats above the paint booth absorb the particles during the painting process within their structure. Due to the modular design, the filter mats can be easily replaced. Dimensions (h x w x d): 2900 mm x 3150 mm x 1100 mm

Condition: new, Year of construction: 2026, functionality: fully functional, We hereby submit our offer for the supply of a large open-type industrial cabin designed for high-efficiency air handling applications. The offered unit is engineered for continuous industrial operation and robust performance in demanding environments. The cabin has overall dimensions of 2,500 mm (length) x 2,250 mm (width) x 2,650 mm (height). It is equipped with a high-performance electric motor rated at 5.5 kW, running at a nominal speed of 2,800 rpm. The motor is directly coupled to a dynamically balanced centrifugal impeller with a diameter of Ø452 mm, ensuring stable operation, minimal vibration, and high aerodynamic efficiency. The system is designed for a maximum airflow of 7,000 m³/h, providing efficient air extraction and circulation for industrial processes. The open-type cabin configuration allows for easy access, straightforward installation, and optimal airflow distribution, making it ideal for applications such as ventilation, fume extraction, and general industrial air handling. All mechanical components are manufactured in accordance with standard industrial practices, ensuring durability, reliability, and long service life. The unit is suitable for continuous duty and complies with typical industrial safety and performance requirements. This offer includes the complete, fully assembled machine as specified above, ready for installation. Kjdpfoyghwijx Adlodt

Condition: new, Year of construction: 2027, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. A hopper with vibrated sieve can be added optionally for powder recycling. ADVANTAGES Saves space in the workshop Easy and fast cleaning Made in Türkiye Kdedpfevv H Hdsx Adljt CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: used, Year of construction: 2001, SUPERFICI UV lamps Type: TU166/35-3UV55 Ksdpfx Adszg Ht Usledt Effective working width: 1300 mm 3 UV radiators with a power of 120 W/cm Tube conveyor with adjustable speed: 4-16 m/min External air filters Lamp dimensions: 250x360x160 cm Control cabinet dimensions: 80x200x210 cm

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Ksdpfx Ajv Ed Ukjdlsdt Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: new, Year of construction: 2026, functionality: fully functional, This solution is an innovative development by 3K, designed as a compact yet highly efficient laboratory furnace system with dimensions of 1000 × 1000 × 1200 mm. The unit utilizes a 0.75 kW electric motor paired with a 200 mm diameter backward-curved impeller, ensuring optimized airflow within the chamber. This design delivers uniform air circulation, promoting consistent thermal distribution and reliable process outcomes throughout the usable volume. From an engineering perspective, the system achieves stable aerodynamic properties with reduced turbulence and energy loss, ultimately enhancing operational efficiency and reliability. In summary, this is a compact, durable, and thoughtfully engineered furnace solution that fuses precise airflow control with proven performance—an ideal choice for demanding laboratory as well as light industrial operations. Kdedpfxsy A Eb Ss Adlst

Condition: new, Year of construction: 2026, Equipment: cabin, Painting/Spraying Booth The Reinox 300x140 professional painting/spraying booth is designed for partial painting and spraying in production facilities where controlled filtration and safety measures are required in environments with explosive materials (ATEX). Thanks to its powerful extraction system and three-stage filtration, a clean working environment is ensured even during intensive operation. De Dsia Ta Hskryqzeci !! This is always a new machine (photo from customer installations). We are the manufacturer. !! Technical specifications: - Fan is certified for ATEX zone 22 Kedpfx Adezkfnrslodt - Extraction area: 3,000 x 1,400 mm - Power supply: 400 V / three-phase - Control: frequency inverter – stepless power control via a potentiometer on the control panel. - Filtration: three-stage filter Certifications & documentation: CE, ATEX, complete technical documentation Warranty: 12 months It is possible to order machines in various individual configurations and sizes! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, We hereby submit our offer for the supply of a large open-type industrial cabin designed for efficient air handling and ventilation applications. The offered machine is engineered for reliable operation and consistent performance in industrial environments. The cabin has overall dimensions of 2000 mm in length, 2050 mm in width, and 2850 mm in height. It is equipped with an electric motor rated at 3 kW, operating at a nominal speed of 2800 rpm. The motor is directly coupled to a dynamically balanced centrifugal impeller with a diameter of Ø452 mm, ensuring smooth operation, low vibration, and high mechanical efficiency. The system is designed to deliver an airflow capacity of 4000 m³/h, providing effective air extraction and circulation for various industrial processes. The open-type cabin design allows unobstructed access, ease of maintenance, and optimized airflow distribution, making it suitable for ventilation, fume extraction, and general industrial air handling applications. Kjdeygh Alspfx Adljdt All mechanical and structural components are manufactured in accordance with standard industrial engineering practices to ensure durability, operational reliability, and long service life. The unit is designed for continuous-duty operation and complies with typical industrial safety and performance requirements. This offer includes the complete machine as described above, fully assembled and ready for installation.