Used Hbm Typ 16 for sale (14,468)

Condition: new, bore capacity in steel (diameter) 16 mm throat 180 mm bore stroke 85 mm spindle taper MK 2 spindle diameter 47 mm spindle turning speed range 320 - 3300 U/min 230 mm 100 mm table surface area 420 x 155 mm connected load frequency 230 V 900 x 600 x 300 cm total power requirement 0,75 kW weight of the machine ca. 8o Kg dimensions 0,7 x 0,7 x 0,8 m Drilling and milling machine Rjdpeupxcyjfx Abhew - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, bore capacity in steel (diameter) 16 mm throat 170 mm bore stroke 50 mm 16 mm spindle taper MK2 Rodpfx Aeupxmrsbhsw spindle turning speed range 50 - 2250 U/min 320 mm 145 mm table surface area 500 x 140 mm connected load frequency 230 V total power requirement 0,5 kW weight of the machine ca. 90 Kg dimensions of the machine ca. 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display !!

Condition: excellent (used), We offer a climate test chamber for sale. Air-cooled Test chamber nominal volume: 280 liters Dimensions: External dimensions of the test chamber: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range: +5 to +100 °C Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Climate range: +10 to +95 °C Humidity range: 10 to 95 % RH Humidity change rate: ≤ ± 3.0 Water connection for humidifier: Tap water or distilled water, 20-liter reservoir Rodezd R T Tjpfx Abhew Power connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 500 kg Type: 3416/16 Refrigerant: R134a For your peace of mind as a buyer, please note the following: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: as good as new (ex-display), Semiconductor protection Make Klöckner Moeller Type DIL SM 16 V-k 400 Volt 16 A Redpfx Absmxi U Sshew 7,5 kw unused from stock

Year of construction: 2011, condition: excellent (used), functionality: fully functional, For sale is a climate test chamber KPK 200. The unit is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2011 Test chamber nominal volume: 280 dm³ External dimensions of chamber: 1500 x 2040 x 1075 mm Minimum installation dimensions: 2060 x 1095 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Number of shelves: 3 units Rjdpsy E Ilxofx Abhjw Maximum permissible load: 90 kg, evenly distributed across 3 shelves Maximum load per shelf: 30 kg Test chamber material: Stainless steel Wst.-Nr. 1.4301

Condition: excellent (used), Multi-slot broach, broaching tool, broach needle, special tool, slotting tool, slotting machine, slotting machine, slotting tool Rjdpsb A I Upefx Abhew -Number: 2 tools available Price: complete set of 2 pieces -1x Tool: Ø 16 0.056 -1x Tool: Ø 15.75 x 16Ø S8 -Weight: 2 kg

Condition: excellent (used), A robust German machine designed for riveting, crimping eyelets, snaps, and other fastening elements. Thanks to its stable construction and electric drive, it ensures consistent and precise operation. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: 167-12 Serial number: 34,756 Power supply: 220/380 V Motor power: 0.25 kW Motor speed: 1390 rpm Redpfx Ajzgl Hyobhow Electric drive with foot pedal 220 V electromagnetic brake Adjustment of working settings Stable industrial construction Made in Germany Condition: Used machine, in good visual condition. Condition as shown in the photos. Sold in the exact condition as depicted in the photographs.

Condition: excellent (used), Here we offer a temperature test chamber. Feutron Temperature Test Chamber, Air-Cooled Test chamber nominal volume: 280 liters Dimensions: External dimensions of the test chamber: Width 1540 mm x Height 2090 mm x Depth 1240 mm Fan motor and door removed: Width 1540 mm x Height 1940 mm x Depth 925 mm Test chamber: Width 720 mm x Height 690 mm x Depth 560 mm Door, clear opening: Width 720 mm x Height 690 mm Viewing window, heated: Width 500 mm x Height 600 mm Installation dimensions of the temperature test chamber with doors open Width 2340 mm x Height 2090 mm x Depth 2165 mm Feed-through opening, 2 pieces on the side wall, left: Ø 100 mm Temperature range -70°C to +180°C Heating: 3.0 K / min Cooling: 3.0 K / min Mains connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerant: R507 / R23 For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant Rjdpfx Aozgah Sjbhsw 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Simodrive feed model Manufacturer: Siemens Type: 6 SC 6116 OAAOO Rjdpefhkt Refx Abhew G 600 D 490 / 49 M6 REQ Output current: 60/120 A Space requirements: W 290 x D 150 x H 480 mm Weight: 13 kg

Condition: excellent (used), Siemens Simodrive Radial Fan Type 6, Serial No. 1162-OBA02.OAA0 Redpfx Absfuv Tfshow

Condition: ready for operation (used), Technotion Fp 1600N Type: TL 24 N linear motor SN:0322011, used, normal signs of wear, 100% functional, delivery as shown in the photos. Rodox Dwggjpfx Abhew

Condition: ready for operation (used), Siemens 6RA2281-6GS22-0 compact unit type D600/400, used, slight signs of wear, 100% fully functional Redpsxagvijfx Abhjw

Condition: used, continuous blanching / pasteurizing / cooking vessel or cooling plant shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating net length ± 11 m width 3.100 mm all stainless steel adjustable speed variable dwell adjustment suitable for steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with outfeed conveyor belt for unloading with elevating spiral screw for loading in good condition Redpfx Aozb Elyobhow Applications : • Blanching of vegetables and potato products • Pasteurising and/or after-pasteurising of vacuum-packed products • Cooking of sausages in natural or artificial casings • Cooking of heads and tongues • Cooking of poultry • Continuous soup production

Condition: used, mileage: 1 km, first registration: 12/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, loading space length: 4,910 mm, loading space width: 2,390 mm, loading space height: 800 mm, Year of construction: 2016, FOR SALE: DUMP BODY ONLY F.X. MEILLER 3-way tipper Previously mounted on an Iveco 6x4 (only 12,000 km) from the German Federal Armed Forces stock! Hardly used!!! Year of manufacture: 2016 * Type: D 316 * Max. 16,000 kg * Max. 275 bar Rodpfey Unt Iex Abhsw * EN 12352-XL * Condition: AS NEW

Condition: excellent (used), Container roller set, container rollers for moving standard containers, Haacon, 16 t load capacity – used: Price ex location: €7,500 (net) Manufacturer: Haacon Type: 4336.16-231720 Year of manufacture: 2022 Rjdpfxeyr Hgyo Abhsw Serial number: 1074982-01-00-001-51 Component number: 215993 Load per set (4 units): 160 kN Load per unit: 60 kN Rolling speed: max. 6 km/h Container rollers for moving standard containers Steering bar for handling the roller when dismantled and for auxiliary steering with parking brake Roller set consisting of drawbar, four swivel castors, lockable in travel direction Rolling operation up to 6 km/h Original price: €9,907 Available: immediately Condition: as new – used only approx. 3 times Location: 79183 Waldkirch

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. Redpfxsyxr T Tj Abhjw All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: used, Year of construction: 1978, machine/vehicle number: NBGMAN 2, Technical data: 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Rodpfx Aer Igtkobhsw Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning length: 205 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 16 mm, controller model: Fanuc Series 18i-TB, number of axes: 5, CNC Swiss-type automatic lathe with main and sub-spindle! TECHNICAL DETAILS Machining Data Bar diameter: max. 16 mm Turning length: max. 205 mm Spindle speed: max. 6,000 rpm Number of axes: 5 Control Control manufacturer: FANUC Control model: Series 18i-TB MACHINE DETAILS Weight: 1,650 kg EQUIPMENT Main spindle Sub-spindle 8 tool stations for side machining 2x 4 tool stations for rear and face machining 3 driven tool stations Small parts discharge conveyor Bar feeder: FMB Minimag 18 (bar length: 3,200 mm) Coolant system: Oil Rodpfsw Eb Hcsx Abhew

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 3085, turning length: 205 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 16 mm, controller model: FANUC Series 18i-TB, number of axes: 5, CNC Swiss-type automatic lathe with main and sub spindle! TECHNICAL DETAILS Machining Data Maximum bar diameter: 16 mm Maximum turning length: 205 mm Maximum spindle speed: 6,000 rpm Number of axes: 5 Bar length: 3,200 mm Control: FANUC Series 18i-TB Rjdpfx Abow Echnohew MACHINE DETAILS Weight: 1,650 kg EQUIPMENT Main spindle Sub spindle 8 tool positions for side machining 2x 4 tool positions for rear and face machining 3 driven tool stations Small parts discharge conveyor Bar feeder: FMB Minimag 18 Coolant system: oil

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 205 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 16 mm, controller model: FANUC Series 18i-TB, number of axes: 5, CNC Swiss-type automatic lathe with main and sub spindle! A similar machine was recently auctioned successfully! TECHNICAL DETAILS Machining data Max. bar diameter: 16 mm Max. turning length: 205 mm Max. spindle speed: 6,000 rpm Number of axes: 5 Bar length: 3,200 mm Control system: FANUC Series 18i-TB MACHINE DETAILS Weight: 1,650 kg EQUIPMENT Main spindle Sub spindle Rjdjw Uip Aopfx Abhjw 8 tool stations for side machining 2x 4 tool stations for rear and face machining 3 driven tool stations Small parts discharge conveyor Bar feeder magazine: FMB Minimag 18 Coolant system: Oil

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1673, turning length: 205 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 16 mm, controller model: FANUC Series 18i-TB, number of axes: 5, CNC sliding headstock automatic lathe with main and sub spindle! TECHNICAL DETAILS Machining data Max. bar diameter: 16 mm Max. turning length: 205 mm Max. spindle speed: 6,000 rpm Number of axes: 5 Bar length: 3,200 mm Control: FANUC Series 18i-TB MACHINE DETAILS Weight: 1,600 kg EQUIPMENT Main spindle Sub spindle 8 tool stations for side machining 2x 4 tool stations for back and face machining 3 driven tool stations Small parts discharge conveyor Rsdpfsw Uim Isx Abhew Bar feeder: FMB Minimag 3200 A

Condition: excellent (used), Feutron Temperature Test Chamber We are offering a temperature test chamber here. Feutron Temperature Test Chamber, Air-Cooled Nominal test chamber volume: 280 liters Dimensions External dimensions: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test chamber interior: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Heated viewing window: 500 x 600 mm Temperature range -70°C to +180°C Heating rate: 4.0 K /min Cooling rate: 0.6 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerants: R507 / R23 For your safety as a buyer, please note the following information! The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (See photo) Redpfx Aoygulyebhsw (Specifications subject to change and errors excepted!) If you have any further questions, we are happy to answer them by phone.

Condition: good (used), Year of construction: 2022, Stow Frames: 9000x1100x100 - 600 pcs - 95 EUR Rodpfx Absqzhncjhjw 9500x1100x100 - 200 pcs - 100 EUR 10000x1100x100 - 90 pcs - 105 EUR Beams: 2700x130 mm (3000 kg load capacity) - 8744 pcs - 11 EUR 3600x160 mm (4000 kg load capacity) - 378 pcs - 14 EUR Leg protections - 890 pcs - 6 EUR/pc

Condition: good (used), Shell end milling cutters, milling cutters, milling cutters, shell milling cutters Rodpfx Absrhmnaohow -Manufacturer: WMW, shell milling cutter, milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg

Condition: used, Flange connection, V-flange, pipe flange -Pipe flanges/welding neck flanges: 81 pieces -Type: DIN EN1092-1 16 different versions see photos / parts list -Material: P235 GH -Price/tax: complete -Weld neck flanges: please inquire about other sizes in stock Rodpeq Rhaqefx Abhow -Transport dimensions: 1200/800/H200 mm -Weight: 467 kg