Used Helmerding Eh 25 for sale (16,555)

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition Hnjdpfoyath Tjx Anven

Condition: good (used), Year of construction: 1987, functionality: fully functional, pressing force: 25 t, table width: 360 mm, table length: 560 mm, throat depth: 180 mm, total length: 1,680 mm, total width: 950 mm, total height: 2,000 mm, overall weight: 1,750 kg, ram adjustment: 60 mm, Projection 180 mm Smallest distance between press bed and ram at maximum stroke at bottom, Ram adjustment at bottom 50 mm Hodpet Sgruofx Anvjnn Largest distance between press bed and ram at maximum stroke top, ram adjustment top 340 mm Fold-through hole in table 150 x 100 mm Table adjustment 150 mm Ram stroke 12-80 mm

Condition: used, Eccentric Press, C-Frame Press, Helmerding EH 35 B, Used Machine Manufacturer: Helmerding Type: EH 35 B Year of Manufacture: 1985 Weight: 2500 kg Technical Specifications: Press Capacity: 35 tons Stroke Length: 70 mm Table Dimensions: 600 x 450 mm Operating Modes: Continuous / Single stroke (Inching) Hsdpfxoy D Uhde Anvenn Safety: Two-hand safety start control Dimensions: Overall Dimensions: 1020 x 1600 x 2400 mm Additional Information: Note: The base plate (bed plate) is not included with the machine.

Condition: used, Year of construction: 1976, pressure 025 t table-size 500 x 400 mm ram stroke - adjustable min/max 20- 120 mm throat 250 mm Hnsdoy Nd Spopfx Anvon ram surface 350 x 250 mm strokes of ram per min. 120 shut height (stroke down, adjustm. up) 300 mm ram adjustment 60 mm tool shank hole (depth x diameter) 32 x 80 mm hole in the table 180 mm weight of the machine ca. 1,6 t Machine has adjustable table (150 mm).

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate Hedpfx Anodzqmzovonn - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, pressure: 3 bar, total width: 750 mm, total length: 2,500 mm, total height: 1,500 mm, overall weight: 120 kg, empty load weight: 75 kg, type of input current: three-phase, 3 Alfa Laval LKH-25 Sets | 7.5 kW Pump + E+H (Promag) Flowmeter + Strainer We offer for sale three (3) professional processing units manufactured in 2020. Each set consists of a high-quality centrifugal pump and a precise measuring and filtration system, mounted on an acid-resistant stainless steel pipeline. Set Specifications: Alfa Laval LKH-25 Centrifugal Pump: - Motor power: 7.5 kW - Capacity: 35.0 m³/h (at 3.0 bar pressure) - Construction: Hygienic stainless steel housing - Mounting: The pump is fitted with its own adjustable support legs for stable, free-standing floor installation and easy leveling. Measuring Equipment (Endress+Hauser): - Each set is equipped with an integrated electromagnetic flowmeter (models Promag P, F, or 300) installed on the pipeline. These are high-precision devices with LCD displays, suitable for operation at temperatures up to 150°C. Filtration and Fittings: - Mesh strainer: Installed on the acid-resistant stainless steel pipeline (visible in the measuring set pictures) - Standard: Hygienic, acid-resistant, fully CIP-compatible Condition and Dimensions: - Year of manufacture: 2020 Hjdpfx Ansy Nkczovsnn - Pump weight: approx. 73 kg - Technical condition: Very good, the units have been operated in a clean production environment and regularly serviced. Application: Ideal for the food, brewing, and chemical industries where hygienic transfer of media with simultaneous precise liquid quantity measurement is required.

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Hodpfx Ajy Rnr Asnvsnn Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,027 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - Special tray 2 + 1 year warranty + incl. aquamatic system + incl. end conductor & REMA 320 plug (other plug types can be fitted on request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,027 mm Width 708 mm Height 784 mm Weight: approx. 1,270 kg Suitable for the following models and others: Toyota 8FBMKT25 Atlet BALANCE Atlet EH 25 Baumann EX 25-40 Caterpillar EP25K PAC Charlatte T135 Charlatte T165 Charlatte T20 Doosan B30NS Hyster E2.0-3.2XM Hnsdpfjy Rnrpsx Anvsn TCM FHB20-E1 TCM FHB25 Common battery sizes available—please enquire. Transport possible.

Condition: used, Year of construction: 1988, functionality: fully functional, Press capacity 5,000 kN Table area 2,400 mm x 1,700 mm Ram area 2,400 mm x 1,400 mm Adjustable stroke 25 mm - 200 mm Ram adjustment max. 200 mm Hodpfx Aeyg Emzsnvonn Stroke rate 20 - 100 spm Drive power 84 kW Machine weight approx. 62,500 kg with roller feeder/straightener combination + decoiler Further data and photos available on request

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: SV 18RA, chuck outer diameter: 200 mm, Very well-maintained lathe for sale Hsdpfx Anjxv Sm Ejvenn

Condition: used, Year of construction: 1986, pressure 35 t throat 240 mm stroke 12-84 mm no. of strokes 135 Hub/min ram - range of adjustment 70 mm table surface area 600x450 mm ram surface 360x180 mm hole in the table 220x130 mm table height 630 mm tool hole in ram Ø35 mm weight of the machine ca. 2,5 t Hnodpfx Ansxh Sx Eovon dimensions of the machine ca. BxTxH 1500x2000x2600 mm

Condition: used, Year of construction: 1993, pressure 110 t chamfer lenght 2550 mm Control Cybelec DNC 70 weight 9000 kg Hodpfx Ajzcqyrjnvjnn dimensions 3000 x 2100 x 3000 mm

Condition: used, mileage: 4,56,000 km, power: 316 kW (429.64 HP), first registration: 04/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 8,500 mm, loading space width: 2,550 mm, loading space height: 1,150 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, MERCEDES ANTOS 2543 Platform 8,50 m + CRANE + REMOTE CONTROL Accident-FREE Hnsdpfoy H Ub Nox Anven IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 456 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 850 x 255 x 115 (L x W x H) CAPACITY: 10 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 575/135 cm TIRE SIZE: FRONT : 385/65R22,5 BACK : 315/80R22,5 FRONT : SPRING BACK : AIR CRANE: PALFINGER PK 33002 - EH C + REMOTE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 3850

Condition: used, mileage: 4,56,000 km, power: 316 kW (429.64 HP), first registration: 04/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 8,500 mm, loading space width: 2,550 mm, loading space height: 1,150 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, MERCEDES ANTOS 2543 Platform 8,50 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 456 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 850 x 255 x 115 (L x W x H) CAPACITY: 10 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 575/135 cm TIRE SIZE: FRONT : 385/65R22,5 BACK : 315/80R22,5 FRONT : SPRING BACK : AIR CRANE: PALFINGER PK 33002 - EH C + REMOTE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? Hnodpfx Aney H Ub Ajvjn LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 3850

Condition: used, mileage: 25,000 km, power: 150 kW (203.94 HP), first registration: 10/1989, fuel type: diesel, empty load weight: 6,940 kg, overall weight: 12,000 kg, axle configuration: 4x4, next inspection (TÜV): 05/2027, fuel: diesel, gearing type: mechanical, number of seats: 6, total length: 7,250 mm, total width: 2,500 mm, total height: 3,050 mm, water tank capacity: 2,450 l, Equipment: all wheel drive, differential lock, parking heater, All-wheel drive, Auxiliary drive, Differential lock, Plastic water tank, 2.45 m³ (2,450 L), Pump, 1600 L/min, 272 operating hours, 6 gears, Auxiliary heater, Location: 97688 Bad Kissingen More pictures to follow. German registration. There may be markings on the vehicles. Mileage according to odometer. Hnjdpfszdq Ansx Anven The vehicle is preferably sold to businesses or for export; Private sale possible, subject to approval. Sale without warranty. The above information is non-binding; errors/changes and prior sale are subject to change!

Year of construction: 2011, condition: ready for operation (used), A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware screwing machine in continuous operation, year of manufacture: 2008. 10) Stürtz SE-VW-FT distribution and stacking trolley in the sash buffer system, year of manufacture: 2008. This is a complete production line for window construction. Documentation available. An on-site inspection is possible. Hnodpfxszcyqmo Anvon

Condition: used, mileage: 4,95,662 km, power: 315 kW (428.28 HP), axle configuration: 6x2, color: silver, driver cabin: day cab, gearing type: automatic, suspension: air, total width: 25,500 mm, total height: 35,000 mm, loading space length: 68,300 mm, loading space width: 24,200 mm, Year of construction: 2018, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will assist you (by phone). Mercedes-Benz Actros 2543 L 6x2 Flatbed with Rear Crane Body: Palfinger PK 18002 EH Axle: Narrow wheel mounting track, Front axle 7.5 t, front axle, cranked design; Rear axle with 440 crown wheel, hypoid, 13.0 t, active lubrication, controlled; trailing axle 7.5 t, steered, unloadable, liftable; axle ratio i = 2.611. Electronic braking system with ABS and ASR, electronic air supply unit (medium), heating, disc brakes on front and rear axle, condensation monitoring for compressed air system, trailer brake (2-line). Wheelbase: 5,200 mm; rear overhang: 2,250 mm. Steering: single-circuit, non-regulated steering pump; stabilizer front axle, additional stabilizer rear/trailing axle. Rear underrun protection (ECE), front underrun protection (ECE, aluminum), rear axle mudguard, 2,550 mm vehicle width, 3-part mudguards with EC splash protection front and rear, aerodynamic underbody paneling. Interior: Smoker’s package, compressed air connection in cab, driver’s air-suspension seat (comfort), co-driver functional seat, seat backrest release, comfort bed top (wide, adjustable), comfort bed bottom with PremiumComfort mattress, velour seat covers, curtain across bed(s), driver’s side sunblind, electric auxiliary air conditioning, automatic climate control, residual heat utilization, additional hot water heater for cab, enhanced insulation, drawers under bed, overhead compartments above windshield, electric roof hatch. 2x 12V/220Ah low-maintenance batteries, regulated generator 24-30V/100A, circuit breakers, voltage converter 24V/12V 10A, 12V/15A connection point for additional consumers, 24V/15A socket passenger side footwell. PSM, Superstructure CAN, ISO 11898 instead of 11992, hill start assist, speed limiter 30 km/h, night driving light switch, 24V 15-pin trailer socket, remote control for air suspension, mirror trim, road vehicle, L-cab StreamSpace (2.50 m), flat floor, cab width 2.50 m, cab mounting height 765 mm, comfort cab suspension with steel springs, manual-hydraulic cab tilt device, left exterior storage compartment/lid, transparent external sun visor, A-pillar cover, tinted windshield with sunband, heated front mirror, air horn, plastic corner bumper, central bumper with towing eyes, door extension, left/right cab entry fixed, central locking system, comfort lock system. Hodpfxjy Adbke Anvonn Transmission: G 211-12/14.93-1.0, Mercedes PowerShift 3, air suspension rear axle, instrument cluster 12.7 cm with additional displays, digital tachograph with extra recording function (VDO), Multimedia Radio Touch, 2-way speaker system, Truck Data Center 6 (DTCO), CB radio pre-installation (12V, DIN slot), toll pre-equipment, Truck Data Center 6 (DTCO) pre-equipment. Tanks: Main tank left, 630 l (aluminum, 650 x 700 x 1600 mm), AdBlue tank 60 l left, lockable tanks. Lighting: fog lamps, LED daytime running lights, LED taillights, work lights rear cab. Engine: OM470, inline 6, 10.7 l, 315 kW (428 hp), 2,100 Nm; Euro VI OBD-C engine version, high-performance engine brake, two-stage fuel-optimized air compressor, radiator louver, regulated water pump, angled air intake integrated into cab, ...

Condition: used, mileage: 60,204 km, power: 177 kW (240.65 HP), first registration: 07/1996, fuel type: diesel, overall weight: 12,600 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro2, Year of construction: 1996, Equipment: ABS, all wheel drive, M-Benz / Daimler 1224 4x4 TLF 16/25 Water Tank Fire Truck VIN 1K111555 Vehicle ID / 0100724 Chassis / Attachments: - Wheelbase: 3,600 mm - Leaf suspension Hsdpfx Anovc Nr Aevenn - AP axle - Tyres: 10 R 22.5 - Remaining tread: Front approx. 80–90%, Rear approx. 90% - 1x diesel tank - 24V power socket at the front - 2x towing hooks, front and rear - Fixed trailer hitch, front and rear - Traction chains Cab: - 6-seater crew / double cab - 2x revolving beacons - 4x air horns - Hill-start assist - Electric mirrors / heated Body: - TLF 16/25 water tank fire truck - Ziegler centrifugal fire pump (322 operating hours) - 1,600 l/min flow capacity - 2,500 l water tank - 8 m suction height - 5x roller shutters (2 each side, 1 rear) Engine / Transmission: - 5,958 cc // 240 HP / 177 kW - Automatic (torque converter) - Retarder - Differential lock - PTO (power take-off) Weights: - GVW: 12,600 kg - Unladen weight: 8,640 kg - Payload: 3,960 kg Miscellaneous: - German vehicle - Municipal vehicle - New roadworthiness inspection (TÜV) available upon request New roadworthiness inspections (TÜV), safety inspections, de-registration/re-registration of weight are available upon request. We can assist you with obtaining export or transit plates and offer vehicle transport within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for typographical errors, changes, prior sale, or mistakes. ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our core strength is the sale of new and used commercial vehicles. On 11,000 sqm we offer a wide range of vehicles. Our company philosophy is based on fairness and trustworthiness. Since customer satisfaction is very important to us, we offer our clients a comprehensive service package and a competent contact person who will assist them throughout the purchase or sale process. See for yourself! Our services for you: Loading of vehicles We are happy to assist you with loading your purchased vehicles. Organizing specialised transport We are happy to help you organise special transports. Temporary/export license plates We are happy to assist you in obtaining export license plates/temporary license plates. Customs documentation We are happy to assist you with customs procedures.

Condition: used, Year of construction: 1989, functionality: fully functional, power: 7.5 kW (10.20 HP), stroke length: 250 mm, oil tank capacity: 120 l, Hydraulic press brake Make: DARLEY Model: EHP Year of manufacture: 1989 Technical Specifications Manufacturer: DARLEY Model: EHP 110 31/25 Year of manufacture: 1989 Usable bending length: 3,100 mm Press capacity: 110 t Throat depth: 250 mm Motor power: 7.5 kW Hydraulic oil: 120 L Dimensions: approx. L 3.5 x W 1.5 x H 2.45 m Weight: approx. 8.7 t Equipment • CNC control Delem DA 42 • Multi-opening die: V12, V20, V20, V16, V40, V70 mm • Straight punch, height 120 mm • Controlled axes: Y1, Y2, X • 2 support arms Hnsdpfxoy Dqpdj Anvon All information subject to change and without warranty. A powered demonstration is available at any time in our exhibition hall.

Condition: used, first registration: 01/2022, color: other, total length: 5,800 mm, Year of construction: 2022, Unused Hiab Optima 25-ton hooklift with 580 cm system length Year of construction 2002 Including service = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. Hodpfx Anoyrd R Novenn You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm clear support width: 3050 mm Hsdpfx As Dqaqonvenn support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Hsdpfey D Sy Rex Anvenn Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, operating hours: 17,446 h, power: 11 kW (14.96 HP), input voltage: 400 V, oil tank capacity: 130 l, total length: 3,300 mm, total width: 2,000 mm, total height: 2,440 mm, overall weight: 8,900 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,100 mm, bending force (max.): 110 t, control type: CNC control, number of axes: 8, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: Used press brake DARLEY EHP-L 110 31/25, year of manufacture 2000. The machine is in excellent technical condition and is highly reliable. Very precise and offers repeatable results. In December 2023, all cylinder seals as well as the hydraulic oil and filters were replaced. In February 2024, the upper WILA tool clamping system was serviced. The machine has very few operating hours. Hydraulics: Hoerbiger Hnjdpfx Anox N Ibhsvon Machine number: 122067 Machine type: EHP-L 110 31/25 Year of construction: 2000 Maximum pressing force: 1100 kN Working length: 3100 mm Power: 11 kW Voltage: 400 V Hydraulic oil tank capacity: 130 l Hydraulic system pressure: 28 MPa Weight: 8,900 kg Tooling type: Hydraulic Wila / Trumpf Control: DELEM DA65 Number of axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 + crowning compensation If you have any questions or would like more information, please send us a message or contact us by phone.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Used Darley CNC press brake Type EHP LS 130 31 25 CL Capacity 3100 x 130 tons Delem DA 65W CNC control Hnedpfjxzgixsx Anven Y1, Y2, X and R axes CNC controlled CNC crowning Hydraulic Wila NS upper and lower clamping

Condition: good (used), mileage: 71,000 km, power: 188 kW (255.61 HP), first registration: 06/1986, fuel type: diesel, empty load weight: 13,295 kg, overall weight: 14,000 kg, fuel: diesel, gearing type: mechanical, operating hours: 1,225 h, Magirus Turntable Ladder DLK 23/12, Year of manufacture: 1986. Operating hours: 1225, last inspection at 1197 operating hours (28 hours ago). Gross weight: 14 t, unladen weight: 13.295 t, swinging seat, differential lock, automatic traction chains, power steering, ABS. German registration. Mileage as per odometer. Vehicle is preferably sold to businesses or for export; private sale conditional. Sale without warranty. The above information is non-binding, subject to errors, changes and prior sale! Phone: 08026/2188 Hnjdpfx Anjx Eda Aoven