Eccentric press

Helmerding EH 25

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations Rsdpfsyath Tjx Aazen - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height Rsdokvnumepfx Aazjn 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1986, grinding diameter 350 mm grinding length 600 mm centre height 175 mm Very well maintained machine. The machine comes from a precision grinding shop from the Black Forest. Can still be viewed under power for a short time at the seller's premises. In 2022, the machine was partially overhauled and serviced in-house with production of the geometry according to the manufacturer's protocol. Redpov Tqqnjfx Aazsn Equipment: -2-axis digital readout FAGOR -sine bar -tailstock with fine adjustment -Hydraulic tailstock -Surface grinding device -Internal grinding device -Fischer UJ70 internal grinding spindle -Paper belt filter -automatic sequence: roughing-finishing-firing-retur Translated with (free version)

Condition: ready for operation (used), Year of construction: 1984, Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. Rsdjr A Eifspfx Aazen

Year of construction: 2002, condition: used, pressure 63 t throat 315 mm Redpslp U D Tjfx Aazjn stroke 8-100 mm no. of strokes 140 Hub/min ram - range of adjustment 63 mm table surface area 1200x630 mm ram surface 800x315 mm hole in the table Ø 110 mm table height 820 mm tool hole in ram Ø 50 mm dayligth 335 mm total power requirement 7,5 kW weight of the machine ca. 5 t

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting Rsdpfxjxd U Sae Aazsn - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Condition: used, Year of construction: 2001, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, nominal power (apparent): 17 kVA, torque: 82 Nm, controller manufacturer: Heidenhain, controller model: Mill Plus, total height: 2,450 mm, total length: 4,000 mm, total width: 2,200 mm, table width: 700 mm, table length: 500 mm, table load: 200 kg, overall weight: 3,500 kg, We are offering here a Deckel Maho DMU 50 T with Heidenhain Mill Plus control for sale. Rodpfx Aaow Dfbhszon

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 520 x 400 mm no. of strokes 160 Hub/min ram surface 160 x 160 mm ram adjustment 40 mm ram hole 32 H7 mm Rsdpfob U Hwpsx Aazjn hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm total power requirement 2,7 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,3 x 1,0 x 1,85 m

Condition: new, pressure 40 t throat 225 mm stroke 8-84 mm Rjdpfx Aaob U Hwtjzjn Table dimensions 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 H7 mm hole in the table 210 x 170 mm T-slots 22 clamping plate 570 x 450 x 65 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

Condition: good (used), functionality: fully functional, Used Kellenberger cylindrical grinding machine for sale in very good condition. Price significantly reduced !!!!! Rsdpfxew Dzbds Aazjn