Used Hm Hsm 2020 X 1.5 for sale (64,442)

Condition: good (used), Year of construction: 2001, sheet width 2020 mm plate thickness 1.5 mm ST bending angle max. 180 ° Swing beam adjustment ca. 20.0 mm Bending time for 90° 5.5 sek Control konv. voltage 380 V total power requirement 1.5 kW weight 1180 kg range L-W-H 2650 x 1230 x 1100 mm Features: - Simple electric motor-driven swivel bending machine - Manual depth/material stop * Stepless adjustment up to a maximum of 700 mm * Adjustment via handwheel from the rear * Analog position display Gsdpjzr Rqhofx Ap Dsbu - Simple manual angle adjustment - 1x bending tool set * With bending rail .. 10 mm - Manual lower crossbar adjustment .. approx. 20.0 mm - Emergency stop button on the front - 1x freely movable double foot switch - Operating instructions (DK)

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Gsdpsra Rbgofx Ap Dsbu Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 630213235, The machine is in like-new condition! The technical data is provided by the manufacturer. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Press force: 594 kN / 60 t Specific pressing force: 45 N/cm² Gjdpfxeyqw Sqj Ap Dobu Cycle time in idle mode: 25 s Idle press capacity (theoretical): 32.5 m³/h Filling height: 1,115 mm Feed opening dimensions: 1,195 x 650 mm Bale dimensions: 1,200 x 1,200 x 1,100 mm Max. bale weight: 550 kg Material to be pressed: Film, mixed paper, cardboard, punching waste MACHINE DETAILS Drive power: 4 kW Voltage: 400 V Frequency: 50 Hz Door design: Sliding door Door lock: Hydraulic Type of loading: Manual Consumables: Wire, looped wire Dimensions & Weight Dimensions (L x W x H): 1,780 x 1,568 x 2,985 mm Machine weight: 2,450 kg EQUIPMENT HSM TCS (TorsionControlSystem) for monitoring the inclination of the press plate Automatic start of the pressing process

Condition: excellent (used), Year of construction: 2020, operating hours: 41 h, functionality: fully functional, Baling press HSM V-Press 825 Plus Pro Year of manufacture: 2020 Operating hours: 41 hours Bale counter: 145 bales Machine is fully functional, inspected, and maintained. Technical data: Width x Depth x Height: 1700 x 1248 x 2370 mm Bale length x Bale width x Bale height: 1200 x 780 x 700 mm Width x Height of the feed opening: 1195 x 540 mm Weight: 1210 kg Type of consumable material: Strapping band Material to be baled: Film, mixed paper, cardboard, stamping waste, clothing Pressing force: 250 kN Voltage: 400 V / 50 Hz Power: 4.0 kW Rated current: 9.0 AMP Gbodpfx Aez H Saqjp Deu

Condition: ready for operation (used), Year of construction: 2014, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2014 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press offers simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Gsdpfx Aez Rmg Usp Dsbu Video available upon request!

Condition: ready for operation (used), Model: HSM V-press 1160 plus baler Pressing force (kN): 532 Bale weight depending on material: up to 550 kg Max. bale size (mm): 1200x1100x1000-1200 Dimensions L x W x H (mm): 1780x1150x2985 Power (kW): 7.5 Weight (kg): 2300 Year 2007-2010, price: 5800 EUR Year 2011-2013, price: 6000 EUR YEAR 2018 COSTS 6000 EUR Gsdpfjra Nyuox Ap Debu We also have HSM V-press 1160 max balers from 2014-2015 available.

Condition: excellent (used), Year of construction: 2016, Make: HSM Model: V-press 860 plus Year of manufacture: 2016 Gsdpfx Apoz Ndwpo Dsbu Press force: 418 kN Voltage: 400 Max. bale weight: 480 kg (depending on the material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Feed opening dimensions: 120 cm x 65 cm Video available upon request.

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 2020 mm plate thickness 2.0 mm distance between columns 2100 mm angle adjustable from - to 130 Grad total power requirement manuell weight of the machine ca. 1850 kg. range L-W-H 3100 x 725 x 1350 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - heavy/manual swivel bending machine, with counterweight Gbsdpfxsxab S Sj Ap Dsu - long service life thanks to robust welded steel construction - universally applicable for metalworking shops and craft businesses - quick and easy bending process using a bow handle - all bearings and guides in a stable design - easy adjustment of the upper beam for efficient work - manual adjustment of the lower beam - manually adjustable angle fixed stop with analogue degree display

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Gedpfx Aoz Iww Rsp Dobu Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Gsdpfx Apowiatij Dsbu Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: ready for operation (used), Year of construction: 2017, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2017 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Gbjdpez Imlqofx Ap Dsu Video available upon request!

Condition: ready for operation (used), Year of construction: 2015, operating hours: 13,907 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, table load: 800 kg, overall weight: 9,000 kg, spindle speed (max.): 14,000 rpm, spindle motor power: 29,300 W, number of slots in tool magazine: 32, tool weight: 7,000 g, number of axes: 5, This 5-axis Eumach HSM-5XC was manufactured in 2015, featuring a Heidenhain control unit and a robust 5-axis rotary table with a Ø 610 mm diameter. It supports a maximum workpiece load of 500 kg and offers extensive axis travels (X/Y/Z: 1020/610/610 mm). The spindle reaches speeds up to 14,000 rpm, powered by a 29.3 kW motor. If you are looking to get high-quality milling capabilities, consider the Eumach HSM-5XC machine we have for sale. Contact us for more information. • Power and weight • Voltage: 400 V Gbedpfx Aox D Hapep Deu • Frequency: 50/60 Hz • Installed power: 75 kVA • Operating hours (Heidenhain – actual machine data) • Control ON time: 42,157 h • Machine ON time: 37,219 h • Program run time: 18,252 h • Spindle running time: 13,907 h • S head running time: 0 h • Table system • T-slot table: 18 × 6 × 100 mm • Rotary table (5-axis), built-in saddle design • Diameter: Ø 610 mm • Spindle to table center: 0–715 mm • Spindle to table top: 105–715 mm • Max. workpiece load: 500 kg • Axis travels • B-axis tilt: +30° to −120° • C-axis rotation: 360° (0.001° resolution) • Geometric distances • Spindle to column cover: 629 mm • Spindle to table center: 947 mm • Spindle • Bearings: Ø 70 mm ceramic • Max torque: 160 Nm • Axis motors • X/Y/Z: Siemens 1FK7083 (16 Nm) • A/B: Siemens 1FW6130 (1320 Nm) • Feeds • Rapid traverse (X/Y/Z): 36 / 36 / 24 m/min • Cutting feedrate: 1–7500 mm/min • Tool magazine • Type: Double-arm tool changer, 430 mm stroke • Capacity: 32 tools • Max tool diameter: 150 mm • Max diameter without adjacent tools: 300 mm Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. Gbjdpfxjz H I Dlo Ap Dsu The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: good (used), Year of construction: 2017, operating hours: 432 h, functionality: fully functional, Horizontal baling press HSM HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of manufacture: 2017 Pressing force: 70 t Operating hours: 432 Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x L) Bale weight: up to 600 kg Tying: 4-strand horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. Gbsdjz H I D Ejpfx Ap Dsu This offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty. Our payment terms are 100% prepayment.

Condition: used, Year of construction: 2020, mileage: 1,294 km, power: 55 kW (74.78 HP), first registration: 10/2022, overall weight: 3,500 kg, fuel type: diesel, color: orange, gearing type: automatic, total length: 4,157 mm, total width: 1,350 mm, total height: 2,160 mm, number of seats: 1, Equipment: air conditioning, all wheel drive, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to final sale, errors, typographical errors, and prior sale: Aebi Schmidt Flexigo 150 municipal vehicle with sweeping attachment including container + water, winter service equipment with spreader attachment and snowplow blade (Vehicle 444) First registration: 14.10.2022 1,294.7 operating hours Engine: 2,216 cc 55 kW / 75 hp Length: 4,157 mm x Width: 1,300 mm x Height: 2,160 mm Permissible total weight: 3,500 kg Unladen weight: 2,150 kg Payload: 1,350 kg TÜV (technical inspection): 10/2027 Tires: 255/65R16, front approximately 50% tread, rear approximately 40% tread Air conditioning Flexigo 150 chassis Perkins 404J-E22TA engine, 4 cylinders, 55 kW / 75 hp, 4 cylinders, diesel Permanent hydrostatic all-wheel drive Comfort cab with middle seat including heating, ventilation, and air conditioning Operating armrest with joystick and 4.3" graphics display Water tanks: 200 L including filling connection Storz C-coupling, suction pipe Backrest tilt adjustment, lumbar support, seat heating, armrest, seat occupancy sensor Adjustable headrests, automatic seat adjustment to the driver's body weight ISRI comfort driver's seat, air-suspended Radio with Bluetooth and hands-free system, USB connection, MP3 player Integrated rear-view camera including 7-inch color display Rear monitoring with infrared night vision camera + TFT monitor in cab Additional suction shaft camera with infrared night vision and LED work light Transport speed: 40 km/h Hydraulic pressure regulation for front lift Lubrication strip block Adapter mounting triangle, Category 0 Water system HD/system, return water hose, detachable, with coupling, for better flushing Tires as all-season tires 255/65R16 with alpine symbol including fender extensions Sweeper attachment Multigo Series 74-1-062, production 2020 Sweeping material container 1.5 m3 and circulating water system, container made of high-quality, rust-free aluminum High-dump emptying 1,600 mm, 200 L circulating water Suitable for sweepers and grass collection Multi-purpose separation sieve for efficient dirt and grass separation Deflector plate with rubber coating (wear protection) Gjdjz Rkt Sopfx Ap Debu Hydraulic quick-change coupling (faster coupling), single-lever operation Stand for removing the sweeping attachment container (tipping trailer) Rear impact protection with 55 mm spacing LED work lights at the rear of the sweeping material container, shovel and broom holder Sweeping unit: 2-brush system (drawn) including suction shaft Sweeping width: 1,190 - 2,400 mm, brush diameter: 900 mm Suction shaft with interchangeable function (attachment and removal) Hydraulic coarse dirt flap on the suction shaft Stepless brush speed adjustment 0-150 rpm Dust reduction by 2 water spray nozzles per disc brush Automatic impact protection, hydraulic tilt adjustment for brushes on the right Body spreader Schmidt Stratos S06-15L, Series S2S34787, production 2020 Spreader superstructure Stratos S 06-(12) with 0.6 m3 container Screw conveyor Protective grille 40x40 mm Folding roof stainless steel Drive via vehicle hydraulics Multi-fast coupling set Control system Evolution Classic EC Spreader plate "350", 2-6 meters Spreading control via LED lamp (red or white) Intermediate frame for Multigo 1.4T Stainless steel front cover Multigo 4 support legs, 1.4 tons load-bearing capacity, crank drive in the center R

Condition: excellent (used), I am offering for sale a professional Bohm Wiedenmann Super 300 sweeper-collector with a working width of 1.5 m. This machine is designed for collecting cut grass, leaves, branches, thatch after scarification, and other debris from green areas, sports fields, parks, golf courses, and large lawns. The Super 300 model is highly regarded for its robust construction and high performance. Technical data: * Manufacturer: Bohm Wiedenmann GmbH * Model: Super 300 1.5 * Year of manufacture: 1998 * Working width: 1.5 m * Permissible total weight: 1450 kg Gsdpfx Apozmhz Te Dobu * Permissible axle load: 1250 kg * Permissible drawbar load: 200 kg * Maximum transport speed: 40 km/h * PTO shaft * Large collection container * Hydraulic control The machine shows normal signs of wear and tear consistent with its age. It is being sold in the exact condition as shown in the photos.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Godpfoygud Aex Ap Dobu Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: used, Year of construction: 2007, total length: 5,810 mm, total width: 1,980 mm, total height: 1,540 mm, Colour: Blue Gsdpfozw A Suex Ap Dobu Empty weight: 11.500 kg Price: On request - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 600007090 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Power [kW]: 15.0 - Max. sheet thickness [mm]: 13 - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 280 - Bottom roll diameter [mm]: 280 - Bending speed [mm/min]: 5000 - Options: Cone rolling, Digital readout - Transport dimensions: 5815mm x 1985mm x 1540mm (l x w x h) - Transport weight [kg]: 11500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2020, operating hours: 1,600 h, clamping force: 400 kN, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, screw conveyor diameter: 55 mm, terms of delivery: EXW (ex Works) Gedpfx Ajv S H Rbep Djbu delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2020, operating hours: 5,400 h, clamping force: 400 kN, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, screw conveyor diameter: 55 mm, Freight basis: ex-site Gbjdpjv S H Rhsfx Ap Deu Delivery time: by arrangement Payment terms: 100% before taking delivery of the machine, net

Condition: good (used), Year of construction: 1992, machine/vehicle number: 921602, Offer 25342 Technical data: - Maximum load capacity per shelf level: 2000 kg - 6 extendable shelves - 1 upper storage compartment - Shelf dimensions approximately: W 3100 x D 1600 mm - Maximum extension of each shelf approximately: 100% - Distance between shelves: 240 mm Gbsdpfx Aszdrulop Dsu - Space requirement approximately: W 3500 x H 2250 x D 2980 mm - Space requirement in depth when extended: 3200 mm - Weight approximately: 2000 kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: FR Jungheinrich, Year of construction: 2020, load capacity: 1,000 kg, lifting height: 6,200 mm, fuel type: electric, mast type: telescopic, construction height: 2,600 mm, fork length: 1,200 mm, tire condition: 95 %, Equipment: head guard, lighting, sideshift, Jungheinrich EFG 550 Electric Front Forklift, 450 hours, Year 2020, 6200mm lift height Drive type: Electric Load capacity: 1,000 kg Year of manufacture: 2020 Operating hours: 485 (may vary, machine is still in use) Technical condition: very good Optical condition: very good Mast type: none, lift height: 6,200 mm Overall height: 2,600 mm Free lift: 1,800 mm Fork carriage / side shifter Fork length: 1,200 mm Gsdpfx Apjpq Id Rj Djbu Incl. charger In very good condition Pickup by appointment only in 79111 Freiburg. Shipping by freight carrier possible, please inquire with your postcode.

Condition: used, Year of construction: 2013, Manufacturer: HSM Type: HL 4010 Re Year of manufacture: 2013 Godpfx Apjz I N Uhs Dobu Pressing force: 40 t

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 602/02, center width: 4,000 mm, center height: 415 mm, spindle speed (max.): 1,600 rpm, controller model: Control System Euro Turn, TECHNICAL DETAILS Maximum turning height: 415 mm Turning diameter over bed: 830 mm Turning diameter over slide: 540 mm Distance between centers: 4,000 mm Spindle bore: 130 mm Spindle speed: 2–1,600 rpm MACHINE DETAILS Gedpfxez Ebbzs Ap Dsbu Control method: Teach-in Control system brand: Monforts Control system type: Control System Euro Turn Power: 55 kW Dimensions & Weight Dimensions (L x W x H): 6,750 x 2,100 x 2,020 mm Net weight: 7,500 kg Transport packages: 2 units EQUIPMENT Documentation CE marking

Condition: used, Year of construction: 2005, power: 7 kW (9.52 HP), FOR SALE / FOR RENT: VERTICAL BALER! (Rental available in Lithuania, Latvia, Estonia, and Poland) Technical Information: Manufacturer: HSM Model: HSM 500 VL Pressing force: 54–540 kN Bale size: 1200 x 800 x 1200 mm Bale weight: approx. 500 kg Gbedpfxjz Ehgwo Ap Deu Max. bale size: approx. 1200 x 800 x 1200 mm (W x D x H) Press chamber dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of manufacture: 2005 SALE PRICE - 4400 EUR + VAT RENTAL PRICE - 160 EUR + VAT