Used Holzmann Lathe / Turning Machine for sale (67,306)

Condition: used, functionality: fully functional, For sale is a used button-turning machine from the manufacturer Hempel. The button-turning machine is fully functional. To avoid any possible misunderstandings, an on-site inspection is possible and recommended after arranging an appointment. The sale is made in the current condition. For used machines, all warranty claims are excluded; the principle of "sold as seen" applies. Now, the mandatory statement: Csdpfx Aezyfvnoptjrg The sale is made with the exclusion of any warranty, liability for defects, guarantee, and right of return. The buyer agrees to this and acknowledges it with his purchase. Liability for damages resulting from injury to health, body, or life, as well as for gross negligence and/or intentional breaches of my obligations as a seller, remains unaffected.

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 Csdpfx Apozacwdotorg - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm Crjdeqwlmqopfx Aptog above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, spindle speed (min.): 18,000 rpm, spindle speed (max.): 2,800 rpm, mount diameter: 300 mm, feed length Y-axis: 1,800 mm, Two-station CNC lathe – Efficiency, precision and productivity in the processing of cylindrical parts The CNC lathe with 2 working units and numerical control is a modern solution for the processing of wooden parts with a cylindrical shape – such as columns, table legs or decorative elements – offering accuracy, repeatability and efficiency in any workshop or factory. Double performance with independent units Equipped with two working units that operate simultaneously or independently, the lathe allows the rapid processing of parts up to 1200 mm. It is ideal for the series production of furniture components, church elements or artistic objects. Solid construction for durability The welded frame made of rectangular profiles, heat-treated, provides stability and torsion resistance. Linear guides on the X, Y and Z axes ensure precise, vibration-free movement. Precision through numerical control Hybrid servomotors, together with the rack and pinion system, guarantee precise positioning and efficient control on all axes. The manually adjustable tailstock with four clamping points stabilizes the parts during complex operations. Advanced motors and cooling Water-cooled motors allow operation at speeds of up to 18,000 rpm without overheating, ensuring a constant work rate and an extended service life. Intelligent DSP control The DSP control unit with internal memory allows for quick file import, project resumption from the stopping point and real-time parameter adjustment – ideal for a continuous and efficient production flow. Cedpfx Aewhbguoptjrg Precision and maintenance auxiliary systems Self-centering chucks firmly fix the parts, while optical sensors and an automatic lubrication system ensure precision and low maintenance. Key advantages Perfect repeatability, even for large production runs Flexibility in operation with independent work units Robust construction and energy efficiency This CNC lathe is designed to deliver consistent performance, high quality and adaptability in woodworking, making it the ideal choice for modern workshops or furniture factories that aim to optimize production processes. Maximum working length 1200 mm Maximum working diameter (Ø) 300 mm Number of work units 2 pcs Control DSP Workpiece rotation speed 0 – 2800 rpm Motor power 4.5 kW Mill speed 18000 rpm Inverter “BEST” inverter Drive motors Servo motors – Hybrid Maximum feed 50 mm/ s Accuracy 0.0125mm

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm Csdpfx Apjw Uf Hwjterg - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: excellent (used), We invite you to contact us for further information and to arrange a product presentation appointment Cedpownxhpofx Aptjrg

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, LATHE FOR EDUCATIONAL USE For sale is a Drechselmeister Stratos FU 230 LV (long version) lathe with a center distance of 1,000 mm. The machine is in very good condition – it is a lathe used for educational purposes and has few operating hours. Therefore, it comes with a full warranty. Technical data: Crodpowud Izefx Aptog - Center height 230 mm - Swing diameter 455 mm (with optional external turning attachment 800 mm!) - Center distance approx. 955 mm for the SPECIAL MODEL STRATOS FU-230 LV (can be extended further with an optional extension table!) - Spindle connection M33 x 3.5 (hardened) with ASR (Euro) drain safety groove - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with scale and trapezoidal thread) - Motor 2 hp (connection 230 V) - Weight SPECIAL MODEL LV 195 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: € 105.00 incl. VAT. Germany: € 125.00 incl. VAT. South Tyrol: € 150.00 incl. VAT. Related terms: Lathe, turning machine, machine tool, wood lathe, turning, lathe tool, woodturning, machining, machine Reference: 5912

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, LATHE FOR WOOD TURNING For sale is a used lathe, model Drechselmeister Twister FU 200, with a center distance of 715 mm. The machine is in very good condition. Technical data: - Center height 200 mm - Swing diameter 395 mm (700 mm with optional external turning attachment) - Center distance approx. 715 mm (can be extended optionally) - Spindle connection M33 x 3.5 with ASR (Euro) drain safety groove - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with trapezoidal thread), prepared for ER-25 drill chuck Crjdpfx Aowudkioptjg - Motor 1.5 kW / 2 hp (230 V connection) - Brake switch, 2-stage - Weight (standard version) 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping by freight forwarder: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT Related terms: Lathe, turning machine, wood lathe, turning, woodturning, turning tools, wood turning, machine Reference A0117

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor Cedpjxf Uwxofx Apterg - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm Crsdjlzm Eqjpfx Aptjg turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz Csdpjwz Rifefx Aptsrg - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: new, Equipment: rotational speed of tool magazine infinitely variable, Heavy grey cast iron machine bed for optimal smooth running and stability when working with unbalanced workpieces Headstock can be moved along the entire machine bed, rotatable by 360° with detents at 0, 30, 60, 90, 135, 180, and 270 degrees Variomatic speed control, infinitely adjustable from 280 to 2500 rpm via rotary knob at the end of the headstock Integrated spindle indexing device 36 x 10° Spindle lock at the front of the headstock for easy changing of workholding fixtures Double wedge clamp for tool rest and extension arm, particularly slip-resistant and efficient Codpfjw A Rqfox Aptsrg Tailstock with robust trapezoidal thread, 108 mm quill travel with scale, 9 mm through hole

Condition: good (used), Code: 0410 Brand: CMC - ITALY Model: LT 1500 Lathe with copying device for wood and similar materials Crsdezc Rmlopfx Apteg Technical specifications: Max centre distance 1500 mm Centre height 240 mm Max working diameter (without copying device) 450 mm Copying device with manual handwheel feed Gouge rest Tailstock Spindle speed rpm 600/1000/1500/2000 Motor power 1,5 Hp three-phase Overall dimensions mm 2430 x 730 x 1230 h Weight kg 340

Condition: good (used), Lathe Crsdpfsi Akv Sox Aptog Length: 1750 mm Motor power: 3 kW Voltage: 380 volts Location: available from warehouse 54634 Bitburg - immediately available -

Condition: used, functionality: fully functional, Hempel P9 cylindrical grinding machine for turned parts Credpfx Ajzlcvpsptog Working length 900 mm Maximum grinding diameter 100 mm Grinding performed using oscillating brushes

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 20577, For sale: Centauro T-Star computer-controlled lathe. Manufactured in 2012. Lightly used. Maximum turning length: 1600 mm, maximum diameter: 250 mm. Cedpfsztfpzex Aptorg

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 161 kg, input voltage: 230 V, spindle speed (max.): 3,700 rpm, spindle mount: MK 2, input frequency: 50 Hz, Twister FU-200 lathe, purchased on April 13, 2021, including roughing gouges and extensive clamping accessories. Suitable for woodturning, round parts, bowls, handles, small series production, and creative workshop projects. Key technical data: - Machine type: Lathe / Woodturning lathe - Center height: approx. 200 mm - Turning diameter: approx. 395 mm - Distance between centers: approx. 715 mm, optionally extendable - Motor power: approx. 1.5 kW - Speed range: 2 belt stages, approx. 60–1350 rpm and 180–3750 rpm - Spindle connection: M33 x 3.5 with ASR Euro safety groove - Tailstock/spindle taper: MK2 - Includes roughing gouges and extensive clamping accessories as per inventory list Crjdpjzuyt Rofx Aptjg - Rotatable and adjustable headstock for flexible machining - Attractive complete package for hobby woodturners, workshops, schools, and makerspaces No warranty

Condition: good (used), Code: 0396 Brand: EINHELL Model: TC - WW 1000 Wood lathe Technical specifications: Crjdpezaa Adjfx Aptsg Power supply 220 Volt Centre distance 1000 mm Turning diameter 280 mm Motor power 350 W N° 4 speeds (890/1260/1760/2600 rpm) Backing pad Tailstock Overall dimensions mm 1500 x 200 x 350 h Weight kg 23

Condition: used, functionality: fully functional, Genini Miniautomat – automatic lathe Automatic lathe for turning square stock Hydraulic pump motor with a power of 1.5 kW Crjdpfozgc Rcjx Aptjg Maximum length of square stock: 950 mm Maximum turning length: 120 mm Maximum turning diameter: 80 mm Two tool posts with profiling tools 1 front spindle for drilling or front profiling 1 roughing tool Machine weight: approximately 1800 kg CE marking

Condition: excellent (used), Year of construction: 2020, For sale is a used Drechselmeister Twister FU 200 woodturning lathe with a center distance of 715 mm. The machine is in good condition. Technical specifications: - Center height: 200 mm - Max. turning diameter: 395 mm (700 mm with optional outboard turning attachment) - Center distance: approx. 715 mm (optionally extendable) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Speed ranges (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Tailstock quill travel: 100 mm (trapezoidal thread), prepared for ER-25 drill quill - Motor: 2 HP (230 V connection) - 2-stage brake switch - Weight, floor-standing version: 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Sale subject to prior sale! Related terms: woodturning lathe, lathe, turning machine, wood lathe, turning, turning tools, woodturning, machining, machine Cjdpfxsyucw Ts Aptsrg Reference: B18OO

Condition: excellent (used), functionality: fully functional, LATHE FOR WORKSHOP USE For sale is a Drechselmeister Twister FU 200 lathe with a center distance of 715 mm. This lathe, which was used in a workshop setting, is in very good condition. Technical data: - Center height 200 mm - Turning diameter 395 mm (with optional external turning attachment, 700 mm) - Center distance approx. 715 mm (optionally extendable) - Spindle connection M33 x 3.5 with ASR (Euro) drain safety groove* - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm Crodpfx Ajzn Nm Tjptsg - Quill travel 100 mm (with trapezoidal thread), prepared for ER-25 boring quill - Motor 1.5 kW / 2 hp (connection 230 V) - Brake switch, 2-stage - Weight of base model 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, machine tool, woodturning lathe, turning, lathe tool, woodturning, turning, machine Reference: Turning at B.

Condition: used, functionality: fully functional, L&Z precision lathe, Leinen & Boley model, with lighting, quick-change tool holder Multifix, steady rest, coolant pump, and 125mm chuck. Cedpfozpd T Dox Apterg (A 165mm chuck is also possible), turning length 500mm, various related parts included, with a 50-liter compressor. €1500.00

Condition: excellent (used), functionality: fully functional, OMA COSBO 120 Grinder for Turned Parts Working length: 1200 mm Two grinding units Polishing brushes with oscillation Template-based operation Cjdpfx Aey Elw Eoptorg

Condition: excellent (used), functionality: fully functional, Genini TBK 70 Automatic Lathe Output square 45×140 mm (approx. 10 pcs/min – 600 pcs/h, with 2 roughing tools – 1 finishing tool) Max. workpiece block: 70×70 mm Min. machinable block: 20×20 mm Crodpfx Aoyxqc Heptsg Max. machinable length: 300 mm Min. working length: 25 mm CE mark

Condition: excellent (used), Livio Macchia 08 LPT lathe part grinding machine Two grinding units Oscillating polishing brushes Template-guided operation Csdpoydn Amjfx Apterg