Used Hbp for sale (55)

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 2030 mm stroke 550 mm Distance table/ram, stroke up 1800 mm table surface area 2000 x 2800 mm table height over floor 760 mm ram surface 2000 x 2000 mm Side window 2000 mm feed down 400 mm/s power requirement 51,0 kW weight 33,0 t dimensions (WxDxH) 3,25 x 3,5 x 5,4 m Height above floor 5,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependant on pressure and way, ram interlocking Iedevuk Hljpfx Adwsht no foundation pit necessary as is where is, WITHOUT putting into operation / WITHOUT additional work

Condition: good (used), Year of construction: 2006, Complete fully automatic large-format bandsaw from Behringer Iedox Upl Sspfx Adwoht Capacity: 510 x 723 mm Double miter (automatic) Feed belt system, self-clamping Year of manufacture: 2006

Condition: good (used), Year of construction: 2001, Manufacturer: BEHRINGER Type: HBP 530 A Year of construction: 2001 Specifications: Metric Metric US Standard Capacity 90° 530 x 530 ° Min, saw length 40 mm Max. Saw length 17 - 110 Saw power 12 kW Iodpfx Aju U Narjdwsht Chip conveyor Yes Dimensions (estimate) length 4000 mm width 2250 mm height 3270 mm weight 4400 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Tensioning device for automatic band saw, saw band rollers, saw band guide Ihsdpfx Aogcct Redwst -Holder, from Behringer HBP automatic band saw -Bore: Ø 80 mm -Dimensions: 380/140/H50 mm -Weight: 8.2 kg

Condition: ready for operation (used), Behringer automatic metal bandsaw, electrically controlled stop, infeed side 15 m, outfeed side 7.5 m Iedpow Tri Aofx Adweht

Year of construction: 2004, operating hours: 15,800 h, condition: ready for operation (used), General Data Ijdpfx Ajx D N Amedweht Machine weight 3000 kg This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine. Application Types Sawing

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Split system. 3 Spindle. Ihsdpfx Aox Ruudodwjt Automatic tool changer. 24 metres infeed. 18 metres outfeed. Gripper Feed measuring system. Infeed and outfeed Cross Transfers.

Condition: excellent (used), Year of construction: 1995, Straight cut: Isdpfx Asu R Rzrodwoht Round 530 mm Flat 1100 x 530 mm Miter Left and Right 45° Round 530 mm Flat W X H 700 x 500 mm Miter Right 30° Round 400 mm Flat W x H 450 x 400 mm

Condition: ready for operation (used), Year of construction: 2002, Band saw, Industrial Band saw, Behringer HBP 220, Used Machine Manufacturer: Behringer Isdpfxetlq Axe Adwjht Model: HBP 220 Year: 2002 Weight: 1120 kg Dimensions: 2350 x 1250 x 1850 mm Cutting Range: 220x230 mm Hydraulic clamp Electrical Data: 1.5 kW; 50 Hz; 6 A Ready for operation

Condition: good (used), Year of construction: 2010, HYDRAULIC BAND SAWING AUTOMATIC MACHINE Manufacturer: BEHRINGER Model: HBP 513 A Year of manufacture: 2010 Sawing capacity round: 510 mm Sawing capacity flat (W x H): 500 x 500 mm Minimum round / flat: 10 mm / 10 x 8 mm Saw band dimensions: 6400 x 54 x 1.1 mm Drive power: 5.5 kW Cutting speed: 20 – 140 m/min Material feed per stroke: 750 mm Material feed, multiple stroke: max. 6750 mm Machine weight: 3,000 kg Dimensions (L x W x H): 2,340 x 3,150 x 2,900 mm Transport height: 2,400 mm Ihsdpfx Aexp Aycedwet All information without guarantee – subject to prior sale and errors excepted. Machine available immediately – subject to prior sale.

Condition: ready for operation (used), total height: 1,400 mm, total length: 2,300 mm, total width: 2,300 mm, throat depth: 260 mm, empty load weight: 2,000 kg, nominal power: 5 kW (6.80 HP), cap round: dia 260 mm cap square: 260 x 260 mm Max height of workpiece: 260 mm Sawspeed: 17 > 120 m/min Length of band saw: 4100 x 32 x 1,1 mm Iodpfoxqr Ursx Adwjht

Year of construction: 2014, operating hours: 5,900 h, condition: ready for operation (used), General Data Measurements width 3100 mm Measurements depth 1850 mm Measurements height 2600 mm Machine weight 2800 kg Isdex D H A Dspfx Adweht This Behringer HBP 410-723 G Metal Band Saw was manufactured in 2014. It features an automatic feed and discharge system, with a working area capacity up to 700 mm x 400 mm. Operating for approximately 5,900 hours, it supports a cutting speed of 20 – 140 m/min and is powered by a 4.0 kW saw drive. Consider the opportunity to buy this Behringer HBP 410-723 G Metal Band Saw. Contact us for more information about this machine. Application Types Sawing

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. Ihodex Rut Topfx Adwst 3 Spindle Drill. 16.5 metres In-Feed. 14 metres Out-Feed. Pusher Unit Feed. Milling / Slotting. Solid Carbide Tooling. Small parts conveyor. 4 way Scribing. In-Feed Cross Transfers. Out-Feed Cross Transfers.

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device Ihjdpjxab R Ujfx Adwet

Condition: ready for operation (used), Year of construction: 2009, Band saw, industrial band saw, Behringer HBP 220N, Used machine Manufacturer: Behringer Type: HBP 220N Ihjdpfxotlqaro Adwet Weight: 1300 kg Dimensions: 2550 x 1250 x 1700 mm Cutting range: 240 x 240 mm Hydraulic vise Electrical data: 230/400 V; 1.5 kW; 5.9 A Ready for operation

Condition: used, Year of construction: 1997, Material feed of any length (max. stroke 400 mm) Cutting diameter: round 360 mm, square steel 90°: 360 x 360 mm Cutting speed continuously adjustable: 17 - 110 m / min. Ijdpfx Asxgn U Tsdwsht chip conveyor Operating instructions and additional saw blades available Further technical data on request Machine weight: approx. 3,400 kg

Condition: excellent (used), Year of construction: 2012, Cutting range round: max. 530 mm Cutting range square: max. 530 x 520 mm Iodowvtckepfx Adwsht Saw band dimensions: 7,000 x 54 x 1.6 mm Cutting speed: 10 - 110 m/min Drive power: 7.5 kW Weight: approx. 4.5 tons

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. Ihodpfxedzp Tce Adwjt From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: good (used), Capacities: Capacity 360 mm diameter , Rectangular 704 x 360 mm at 90 degrees or 340 mm diameter , Ijdpfsig T Abox Adwjht Rectangular 400 mm x 340 mm at 45 degrees. Input 415/3/50 4kw approx. Speeds 20-120 meters per min. Swivel frame 0-45 degrees. Vice opens 710 mm. Measuring Head. Infeed / Outfeed powered rollers. Infeed / Outfeed Cross transfers

Condition: new, Year of construction: 2022, You have a Behringer saw and your control panel is defective, the membrane keypad is broken, but the machine is still too good to replace. The BT 41 is a very common control panel and we can repair it for you! Please contact us. Iedpetv Ip Ijfx Adwsht

Condition: excellent (used), Year of construction: 1995, Manufacturer: Behringer Type: HBP220 Year of manufacture: 1995 Inclusion dimensions: 2400 x 1800 x 1500 mm Weight: ~1300 kg Cutting range: 350 x 220 mm Ø: 220 mm - Hydraulic vise - Chip conveyor Works perfectly, two-handed start Iedon Tphtopfx Adweht

Condition: used, Year of construction: 2008, Material feed in any length (max. stroke 610 mm) Cutting diameter: round 510 mm, flat 500 x 500 mm Ihjdpfxsvxqtae Adwet Cutting speed adjustable via control: 25 - 235 m/min chip conveyor Operating instructions, circuit diagrams and spare parts lists available Just under 5,000 sawing hours Further technical data see photo or on request Machine weight: approx. 3 t

Condition: used, Year of construction: 1985, cutting diameter 340 mm dimensions of saw-blade 4860 x 32 x 1,1 mm cutting range square 340 x 340 mm cutting speed 17 - 120 m/min Iodpowyfa Aefx Adwoht drive motor 4 kW weight of the machine ca. 2,5 t dimensions ca. 2600 x 2600 x 1650 mm ncl. chip conveyor and chip tray Hydraulic bundle clamping device incl. electrical circuit diagrams the previous owner only sawed at one speed Adjustable cutting pressure valve HSS bimetal saw band Hydraulic material and saw band tensioning with electrical monitoring Automatic height adjustment of the saw frame Automatic adjustment of the movable band guide arm Electrical piece counter Digital display of the dimension preselection Constant, hydraulic clamping of the carbide band guides

Year of construction: 1997, condition: used, Quick clamping device, quick clamping device, hydraulic clamping device, automatic band saw clamping device, hydraulic double vice Ihedpfx Adsgbvnvowjt -Clamping device: hydraulic double vice from automatic band saw Behringer HBP 360 A -Clamping depth: up to approx. 380 mm -Measurements: see photos -Dimensions: 400/1130/H665 mm -Weight: 192 kg

Condition: used, Year of construction: 2013, functionality: fully functional, HD-X 918 – HBP 410/923G complete, state-of-the-art, CNC-controlled system for efficient and rapid fabrication by drilling and sawing of almost all types of structural sections and flat bar. 3 G Ihedow Hf T Nepfx Adwet