Used Hsm Ak 10 / 900 for sale (35,175)

Year of construction: 1987, condition: used, Press force: 10t, loading aperture dimensions X/Y: 580mm/900mm, bale width/height: 500mm/600mm, bale weight depending on material: approx. 100kg, motor power: 6.8kW, Control system: Siemens SIMATIC S5-100U. Machine dimensions X/Y/Z: 4700mm/1000mm/1540mm, weight: approx. 1200kg. The machine has been overhauled and is in good condition. Documentation available. An on-site inspection is possible. Fsdjzybumopfx Ap Dsgh

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, pressing force: 10 t, filling opening width: 580 mm, filling opening length: 900 mm, bale length: 800 mm, bale width: 500 mm, bale height: 600 mm, bale weight: 100 kg, total width: 1,000 mm, total height: 1,540 mm, total length: 4,700 mm, overall weight: 1,200 kg, power: 6.8 kW (9.25 HP), transport length: 4,700 mm, Equipment: documentation/manual, safety light barrier, The machine has been overhauled by us and was completely disassembled. Fodpsy D Dr Sofx Ap Degh Main cylinder resealed. New hydraulic hoses. New hydraulic oil. Sub-oil motor. Plexiglass panels replaced. Guide rollers on the press plate readjusted. Triple horizontal manual tying. Tying with wire. Bale length adjustable: 400, 600, 800, 1000 mm. Operating manual with electrical and hydraulic diagrams available.

Condition: excellent (used), Year of construction: 2019, For sale are the following functional and well-maintained oil burners: 1. Fedpfx Apsy Uvhto Degh Burner type: WM-L10/3-A, MULTIFLAM Output: 200 - 900 kW 17-75 kg/h Design: T-3LN Year of manufacture: 2019 2. For sale is a functional and well-maintained oil burner from Weishaupt, model WM-GL10. It was only used with oil, therefore it does not have a gas line. Burner type: WM-L10/3-A Output: 110 - 1000 kW 15 - 84 kg/h Design: ZM-T Year of manufacture: 2007 3. For sale is a functional and well-maintained oil burner from Weishaupt, model RL3-A. Burner type: RL3-A Output: 120 - 775 kW 10 - 65 kg/h Design: ZMD Year of manufacture: 2002

Condition: used, Year of construction: 2013, Manufacturer: HSM Fgodpfx Apsz I N Uhe Djh Type: HL 4010 Re Year of manufacture: 2013 Pressing force: 40 t

Condition: excellent (used), Year of construction: 2020, operating hours: 18 h, functionality: fully functional, HSM V-Press 610 baling press Year of manufacture: 2020 Operating hours: 18 h Bale counter: 61 bales Machine is fully functional, inspected, and serviced. Fsdpfxoz H R T Ao Ap Djgh Technical data: Pressing force: 120 kN Specific pressing force: 25 N/cm² Drive power: 3 kW Voltage / Frequency: 400 V / 50 Hz Cycle time in idle mode: 22 s Pressing capacity in idle mode (theoretical): 2.5 m³/h Filling height: 655 mm Width x Height of the filling opening: 800 x 495 mm Bale length x Bale width x Bale height: 800 x 600 x 600 mm Bale weight (up to): 100 kg Width x Depth x Height: 1198 x 823 x 1986 mm Weight: 540 kg Type of strapping: Vertical Number of straps: 3 Type of consumable material: Strapping band

Condition: excellent (used), Year of construction: 2011, Weishaupt gas burner, with Dungs gas piping DN 50 Burner type: WM-G10/3-A Fedpfx Apszdku Ro Djgh Design: ZM-LN Year of manufacture: 2011 Output: 125-900 kW

Condition: used, Year of construction: 2014, Manufacturer: HSM Type: HL 4010 Re Year of manufacture: 2014 Pressing force: 40 t Fgsdpfozxqkzsx Ap Deh

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Fodeyhbxcspfx Ap Dogh Year of manufacture: 2015 Pressing force: 40 t

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 1,0 ST. Gebr. Zwei Komponenten Spritzgiessmaschine das zweite Aggegeat ist seitlich angebau Hersteller: NETSTAL Typ: SYNERGY 1750-900-230 Baujahr: 2016 Schließkraft: 175 Tonnen Holmabstand: 510 x 510 mm Schneckendurchmesser 1: 50 mm Spritzteilgewicht 1: 377 g/PS Schneckendurchmesser 2: 25 mm Spritzteilgewicht 2: 47 g/PS Ausstattung: Fjdpoz Nmi Hsfx Ap Djgh Kernzüge 2 x DS / 1 x AS Zweites Aggregat ist seitlich angebaut Roboter Wittmann, Baujahr: 2016

Condition: good (used), Year of construction: 1998, Mikron UM 710/900 Universal Milling Machine High-precision universal tool milling machine from the Swiss quality manufacturer MIKRON, model UM 710/900. The machine comes from a well-maintained environment and impresses with the renowned Mikron precision and generous work area (up to 900 mm travel in X). It is ideally suited for toolmaking, prototype construction, training, or demanding repair workshops. Technical data at a glance (manufacturer's specifications): Work area & axes: Longitudinal travel (X-axis): 710 / 900 mm Transverse travel (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Spindle: Tool holder: SK 40 / DIN 69871 Gear stages: 4 Speed range: adjustable (vertical & horizontal) Main drive & feed: Spindle drive power: 11 kW (at 44% duty cycle) / 7.5 kW (at 100% duty cycle) Feed rate (X, Y): 0 – 10,000 mm/min (programmable) Feed rate (Z): 0 – 8,000 mm/min (programmable) Rapid traverse (X, Y / Z): 10 m/min / 8 m/min Work table (rotary table): Clamping surface: 600 x 1,200 mm T-slots: 9 pieces (14-H7, spacing 63 mm) Max. table load: 500 kg Electrical system, dimensions & weights: Connected power: Total installed rated power 21.5 kW Operating voltage: 3 x 400 V - 50 Hz Coolant system: 150 liter capacity Machine weight: approx. 4,300 kg (incl. safety cabin) Product video Fgodszcqcgjpfx Ap Dsh “Everything from a single source: We will gladly offer you suitable bank financing for your project.” More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2013, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Re Year of manufacture: 2015 Fgodpfxjyq Ngte Ap Doh Pressing force: 40 t

Condition: ready for operation (used), Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Year of manufacture: 2012 Fgedpfxex D U N Sj Ap Doh

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Fjdpsz Aaggsfx Ap Dogh Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: excellent (used), Year of construction: 2011, Robot complete with connection cables, teach panel, and control cabinet. All checked and tested. Can be inspected under power on site. Fgodpfxoxv R Sme Ap Dsh

Condition: used, Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2012 Fgsdjx H R U Sjpfx Ap Dsh Pressing force: 40 t

Condition: used, Year of construction: 2018, operating hours: 7,293 h, total height: 9,500 mm, total length: 34,500 mm, total width: 14,550 mm, Production year: 2018 Model: 10HM Drake Number of operating hours: 7293 h Minimum space requirements: 34500mm x 14550mm x 9500mm Electric motor power (Siemens): 550 kW Working shaft width: 1000 mm Configuration: 10 hammers, 3-2-3-2 arrangement (weight per hammer: 105-117 kg) Capacity: 14 tons/hour Magnetic separator (steel) – 2 units Fgodpfszmul Eox Ap Doh Eddy current separator (non-ferrous metals) Drum screen Spare parts: Flap, 3 sets of hammers, pins, conveyor belts, sensors, 6 screens, gearboxes If you have any questions or require further information, please send a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,484 h, overall weight: 2,580 kg, controller manufacturer: SIEMENS, controller model: S7-300, Circular Metal Saw manufactured in 2017. This STEIN BAK10-D features an electrical height adjustment system and individually adjustable caterpillars and saws. It has a maximum saw blade diameter of 400 mm and a regulated saw blade nominal speed ranging from 500 to 4200 rpm. If you are looking to get high-quality cutting capabilities, consider the STEIN BAK10-D machine we have for sale. Contact us for further details. Fedpfezt Sa Hsx Ap Degh - Machine Type: Double Caterpillar Saw Combination- Operating Voltage: 400 V- Connection Power: 22 kW- Nominal Current: 55 A- Frequency: 50 Hz- Operating Hours: 3484 h- PLC / Control Unit: Siemens S7-300 / Dual Siemens SIMATIC HMI Touch panels- Height Adjustment: Electrical height adjustment of the entire system- Caterpillars & Saws Adjustment: Both caterpillars and saws individually adjustableCaterpillar (Haul-off) Specs:- Total Pull-Off Force: 10 kN- Pull-Off Speed: 0.1 to 10 m/min- Belt Contact Length: 1000 mm- Upper Edge Lower Cleat Min. / Adjustment Travel: 1000/150 mm- Belt Width: 100 mm- Maximum Temperature: 120°C- Upper Part Stroke: 200 mm- Center Distance: 220 mmSaw Specs:- Regulated Saw Blade Nominal Speed: 500 - 4200 rpm- Motor Power: 3 kW- Motor Voltage: 230/400 V- Max. Saw Blade Diameter: 400 mm- Max. Material Speed: 10 m/min- Saw Repeat Accuracy: +/-0.5 mm/m- Longitudinal Stroke (Extruder Direction): 900 mm- Average Working Height: 1100 mm- Adjustment Option: +/-50 mm

Condition: used, Year of construction: 2015, operating hours: 10,900 h, functionality: fully functional, overall weight: 19,000 kg, Model: Fine Shredder Doppstadt AK 510 BioPower Year of manufacture: 06/2015 Serial No.: 983 Location: NRW Operating hours: approx. 10,900 hrs Availability: short-term, by arrangement Standard equipment: - Central axle trailer chassis for 80 km/h - Brake system with ABS according to EC directive - 50 mm EC towing eye, bolt-on shoe - Tyres 285/65 R 22.5 - Permissible total weight 19,000 kg - Mercedes-Benz engine OM 460 LA, 375 kW at 2,000 rpm, emission standard Euro Mot III B - Load-dependent feed control incl. automatic scraper conveyor reversal - Fuel tank 600 liters - Complete radio remote control - Hydraulic drive - Hydraulic support legs - Separate drive for feed roller/scraper conveyor 'TwinDrive' - Painted in RAL 2011 deep orange Condition of the machine: Fgsdpfxoy Sam Uj Ap Doh The machine is in technically and visually good and ready-to-use condition. New diesel engine at 10,310 operating hours! Warranty: The machine is sold in the condition existing at the time of delivery. The seller assumes no liability for defects.

Condition: used, Year of construction: 2018, HSM V-Press 605 Waste Paper Baler — Used The HSM baler is a compact machine that can reduce packaging waste by up to 95%. It is designed for compressing and baling cardboard (paper bags, waste paper, trimmings) and plastic film (stretch film, plastic bags). It enables cost-effective disposal of these materials. The waste paper baler features a graphical text display showing the machine’s operating status and a large opening for loading waste. All of this contributes to the baler’s ease of use and intuitive operation. Advantages of the HSM V-Press 605 baler: • Compact size – saves space. • Compression force of 57 kN (approximately 6 metric tons)—allows for the formation of bales weighing up to 70 kg with dimensions of 80 x 60 x 60 cm. Fsdpfx Aszrl I Iop Dogh • Low noise level—60.1 dB(A) • Material-supporting claws – increase the loading capacity, thereby boosting baling efficiency. • Mechanical ejector – facilitates bale removal. • Large waste loading opening – enhances ease of use. • Quick and easy installation. This offer applies to the HSM V-Press 605 waste paper baler: • Manufacturer: HSM • Product condition: used • Year of manufacture: 2018 • Model: V-Press 605 • Width: 119 cm • Depth: 81.5 cm • Height: 198 cm • Weight: 485 kg • Power: 1,500 W • Voltage: 400 V Net price: 3,579.00 euros per unit * I have large quantities available; price negotiable for larger orders. * Shipping available throughout Europe. * The above offer does not include shipping costs. * Location: Chmielów/Tarnobrzeg

Condition: good (used), Year of construction: 2017, operating hours: 432 h, functionality: fully functional, Horizontal baling press HSM HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of manufacture: 2017 Pressing force: 70 t Operating hours: 432 Specific pressing force: 58 N/cm² Fgodpfx Asz H I D Eop Dsh Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x L) Bale weight: up to 600 kg Tying: 4-strand horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. This offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty. Our payment terms are 100% prepayment.

Condition: excellent (used), Year of construction: 2018, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2018 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running ProcessDesigner processes. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Nozzle radius: 25 mm Nozzle opening: 9 mm Clamping unit Clamping force: 9000 kN / 900 t Mold opening force: 630 kN Platen dimensions (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Standard maximum distance / opening width: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight: 3228 g* Injection speed: 90 mm/s Injection rate: 779 cm³/s Standard screw speed: 150 rpm Plasticizing rate at standard speed: 135 g/s* Nozzle pressure force: 166 kN * according to the manufacturer's specifications / reference material provided. Electrical and hydraulic equipment Rated motor power: 120 kW Fsdezvm E Aspfx Ap Dsgh Installed heater power: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Required hydraulic oil quantity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40.0 t

Year of construction: 2022, condition: like new (used), Used Machine Year of Manufacture: 2022 Condition: Like new, very few operating hours, not used in production Features and Technical Specifications: - Compact screw compressor with variable speed control and innovative LOGIN control system - Includes air receiver and refrigerated dryer - Maximum pressure: 10 bar - Effective air delivery: 1,050 l/min - Motor power: 7.5 kW - Noise level: 62 dB(A) - Connection: 1/2 - Tank capacity: 270 liters (AD2000) - Variable-frequency drive - Electronic control - Oil heat exchanger - Compressed air receiver hot-dip galvanized inside and out - Drive transmission: Direct coupling - Starting method: Star-delta Fgjdpfxjzk Nrze Ap Dsh - AD 2000 compliant: yes Dimensions: 1,200 × 650 × 1,540 mm Weight: 295 kg Availability: available shortly Storage location: Röllbach

Condition: excellent (used), Year of construction: 2004, Ref:11162 . 2004 Kolbus Publica KM410.C High speed perfect binding line. Comprising: 15 x stream feeders with extended infeed for log loading 30 x ZU841C gatherer with interchangeable top-loading feeders for folded sections and single sheets Hand feed station Automatic thickness control AS 800 reject station for over or incomplete books with length & width monitoring Raceway/transfer with vibrate unit Publica binder type KM410.C with 24 clamps with ‘Co-Pilot’ Milling/brushing, equalizing milling, ‘Micro’ notching & brushing units LH370 EVA pre-melt units 2-shot EVA hot-melt spine glue tank EVA hot-melt side glue unit I.R. heating in radius for increased glue open time SAL410A Stream cover feeder with four-line scoring Cover nipping/pressing station Delivery system with lay-down device and reject station Conveyor system including cooling tower to; Kolbus HD152.P pile trimmer with ‘Co-Pilot’; Rima RS-3310S compensating book stacker to; Specification: Book size, Max: 420 x 290 x 65 mm Max: 420 x 305 x 20 mm Min: 105 x 100 mm Book thickness : 3 -- 70 mm Mechanical speed, Max: 15,000 cycles/hr Fgedez I Tz Sepfx Ap Dsh

Condition: excellent (used), Year of construction: 2015, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2015 Clamping force: 9000 kN / 900 t Fgodpezvm T Tsfx Ap Djh Control system: MC6 Closing system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen closing system with 4 pressure cushions on the stationary platen and 4 adjusting units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer with real-time Ethernet technology, equipped with an integrated 19-inch control panel with a color touchscreen, LED backlighting, and ProcessDesigner process visualization. Plasticizing unit Complete plasticizing unit for thermoplastics, featuring abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Closing unit Mold clamping force: 9000 kN / 900 t Mold opening force – pressure cushions: 630 kN Dimensions of mounting plates (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Maximum mold opening stroke: 1600 mm Mold height min./max.: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 3228 g Injection rate: 805 cm³/s Screw speed: 150 rpm Nozzle clamping force: 166 kN Electrical and hydraulic equipment Rated power of pump motor: 120 kW Installed power of heaters: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40 t

Condition: good (used), Year of construction: 1996, travel distance X-axis: 710 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 5 rpm, For sale: Mikron UMS 710-900 machining center The machine is in good condition. New ball screw drives for X and Y axes, new cover for Z axis, and new Z-axis spiral. Technical data: x-travel: 710 mm y-travel: 630 mm z-travel: 500 mm CNC control: HEIDENHAIN TNC 426 Table size: 1200 x 600 mm Max. table load: 500 kg Spindle mount: SK 40 with ring groove Spindle speed range: 5 – 5,000 rpm Spindle drive power: 11 kW Feed rate range: 0 – 10,000 mm/min Rapid traverse: 10 m/min Operating voltage: 400 V Total connected load: 15 kW Machine weight approx.: 5.0 t Floor space required approx.: 2.40 x 3.40 x 2.30 m Chip tray No internal coolant supply (IKZ) 44-position tool changer Handwheel Initial filling with operating fluids for the machine available on request. Fjdpfx Apett Acgo Djgh Loading and transport can be organized throughout Europe for an additional charge. All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? For further information or contact options...