Used Ht Hapro Technik Sj 4000 for sale (10,655)

Condition: new, Year of construction: 2026, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies Dodpfx Aou Hz Tqjptscl + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Condition: used, Year of construction: 2004, operating hours: 4,147 h, functionality: fully functional, machine/vehicle number: DRI 04320080, mileage: 100 km, overall weight: 7,000 kg, fuel type: diesel, color: blue, operation weight: 14,000 kg, maximum load weight: 15,000 kg, chain condition: 70 %, bar diameter (max.): 61 mm, pipe diameter (max.): 400 mm, Equipment: cabin, crane, hammer hydraulics, hydraulics, rubber tracks, German horizontal directional drilling (HDD) machine for drilling up to 200 meters in length, with a drilling/pulling force of 15 tons + impact (28 tons) from a hydraulic hammer. Rubber tracks for speeds up to 3 km/h. Designed for laying pipes up to 400 mm in diameter underground. Drilling depth up to 1-10 meters with wireless navigation. Manufacturer: TRACTO-TECHNIK GmbH & Co, 2004. 4147 operating hours. Components and assemblies: Trailer with hydraulic drive, HATZ diesel engine, 4 cylinders, cabin, 3 boxes with drill rods (each box contains 48 rods x 3 m) = 144 rods (432 meters). Control options: 1. Manipulator for feeding drill rods. 2. Semi-automatic rod tightening and pulling. Mixing plant (8056D) with hydraulic power unit (TT-M2) DRI 8904.B, Deutz engine, 4 cylinders, diesel, with bentonite pump P-72, 320 l/min, with two bentonite preparation tanks of 4000 liters each, with two BÖRGER rotary pumps for mixing. Dodpfxoy H H Uuj Aptjcl Cable for connection to the mixing plant. Drum with bentonite hose. 2 drilling heads. Reamer Ø110. Swivel 5t. Reamers Ø280 with swivel, Ø315 with swivel, Ø385 with swivel. Eclipse navigation system. New spare working components (adapter, probe housing, bushing).

Year of construction: 2001, condition: excellent (used), I sell the 2-head 4-lamp UV-drying tunnel Cefla Ecolight TLF/BB/4+TTE 4000 Year 2001 Working width 1400mm. Total length 4,00m Total power 74,3 kW Very good condition, available immediately. Dedpei Eup Eofx Aptocl

Condition: good (used), Year of construction: 2014, functionality: unexamined, machine/vehicle number: 68235-1411-265, overall weight: 1,600 kg, total height: 2,850 mm, total length: 1,415 mm, total width: 1,415 mm, space requirement height: 3,200 mm, type of input current: AC, Equipment: type plate available, We are offering this used Lang Technik Eco Tower 60 automation system, manufactured in 2014. Year of manufacture: 11.2014 Serial number: 68235-1411-265 Type: Eco Tower 60 Article number: 68235 in good used condition, consisting of: 1 ECO FEED component placement machine, manufactured in 2014 1 ECO TOWER 60 component placement tower, manufactured in 2014 40 Eco Grip vises, size 77, base body made of steel 20 Eco Grip vises, size 77, base body made of aluminum 4 Eco Grip vises, size 125 1 Vise carriage 1 LANG Quick-Point clamping tower 1 Pneumatic interface between handling system and clamping tower 1 Operating manual and installation guide The automation system is available immediately! Djdozvc Rhopfx Aptocl Inspection is possible at any time! If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, overall weight: 300 kg, LANG Clamping Tower 70850 with Grid Plates 75710 and Arbor Clamps 48155-125 2 towers with plates and arbor clamps are available! We offer a high-quality LANG Clamping Tower 70850 with matching Grid Plates 75710 and Arbor Clamps 48155-125. This clamping system is ideally suited for precise and efficient 5-axis machining as well as multi-sided machining on CNC machining centers. Technical data: Manufacturer: LANG Technik Type: Clamping Tower 70850 Accessories: 8 x Grid Plate 75710 Clamping system with grid hole pattern High repeatability Robust design for industrial use Ideal for automated manufacturing and setup time optimization Condition: Used, technically perfect. Normal signs of wear and tear consistent with age and use. Scope of delivery: 1 x LANG Clamping Tower 70850 8 x LANG Grid Plates 75710 4 x Arbor Clamps 48155-125 Dodpfxoztzi Rj Aptecl The clamping tower enables optimal use of the machine's working area and increases productivity by machining multiple workpieces in a single setup. Inspection possible by appointment. Shipping or collection by arrangement.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, operating hours: 4 h, input frequency: 50 Hz, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 180 mm, workpiece length (max.): 1,250 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, actuation type: electric, overall weight: 250 kg, Equipment: documentation/manual, We offer this like-new CNC-Technik ALM-1204-002 machining center, manufactured in 2022. Working area: 1,250 x 1,000 x 180 mm Country of origin: Germany Tangential unit preparation for the AL-M series Electronics upgrade with a 4th motor driver for controlling the tangential module or rotary axis Inductive tool length sensor AMB 1400 FME-P Technical specifications: Input power: 1,400 W Rotation speed: 5,000 ... 25,000 rpm Mounting to the portal: 43 mm mounting flange Collet: ER16 Weight: 1.80 kg Power connection: 4 m power cable Set of 3 ER-16 collets Collet dimensions: Vacuum table milled into the plate Grid spacing 20 mm Includes M6 threaded holes in the grid Vacuum pump TOPAS E101 V 2.2 kW (set) Oil-lubricated rotary vane vacuum pump DS motor, 2.2 kW 230/400 V 50 Hz IE3 Motor version with PTC (standard) Nominal pumping capacity 100 m³/h Ultimate vacuum 0.5 mbar (abs.) without gas ballast 1.5 mbar (abs.) with gas ballast Includes suction filter 1 1/4" and paper filter cartridge Dsdozfwavopfx Aptocl Flow rate 84 m³/h The drive operates on 180-watt servo motors and 16 mm ball screws. With this configuration, the maximum speed, depending on the spindle pitch and software, is 500 mm per second. The control system operates with ground and hardened roller guides featuring a gothic profile. If you have any questions or require further information, please write or call us.

Year of construction: 2008, condition: used, Two identical separating tables are available, screen width: 890mm, screen length: 1000mm, screen area per screening deck: 0.89m², number of screening decks: 1, number of outlets: 2 (light/heavy material), screen clamping: manual/pneumatic, dimensions with outlets: 1738x1287x1351mm, dimensions without outlets: 1140x1287x1351mm, weight: 700kg, an on-site inspection is possible. Dodpszyq Txsfx Aptocl

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, LANG Embossing Station 52610 for Macro-Grip® Clamping Technology Offered is a LANG embossing station, type 52610, for preparing raw parts for the proven Macro-Grip® clamping system from LANG Technik. The embossing station enables the embossing of the clamping contour into raw materials, thus ensuring a positive, process-reliable workpiece clamping during 5-axis machining. Equipment: Manufacturer: LANG Technik Type: 52610, older version Embossing station for Macro-Grip® clamping technology Positive pre-embossing of raw parts High process reliability during machining Robust industrial design Dcedpfozu Imfjx Aptsl Simple and fast operation Advantages: Maximum holding forces with low clamping height Optimal accessibility for 5-axis machining Reduction of vibrations and workpiece movements Fast and reproducible workpiece preparation Ideal for raw materials in single-part and series production Application areas: CNC machining centers Tool and mold making Job manufacturing Single-part and series production 5-axis machining of raw parts Used, fully functional. Normal signs of wear and tear corresponding to age and use. Scope of delivery: LANG embossing station with clamping jaws Accessories according to photos or upon inspection Inspection and functional test possible by arrangement. Shipping or pickup by agreement.

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Dsdpjzww R Ssfx Aptecl

Year of construction: 2016, condition: excellent (used), functionality: fully functional, LANG Eco Tower 60 Dcsdpfxjztvgqj Aptsl in like-new condition, consisting of: 1 × ECO TOWER 60 component loading tower, year of manufacture 2016 1 × ECO FEED component loading system, year of manufacture 2016 30 × Macro Grip vises 1 × LANG Quick-Point automated clamping tower This automation system can be easily integrated with any CNC milling machine and is available immediately! Capacity up to 60 vises!! Inspection possible at any time!

Condition: used, Year of construction: 2000, overall weight: 150 kg, terms of delivery: FCA Pegnitz delivery time: on request Dcedpfxex H Ttke Aptjl terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Koch is up for sale. Below are some technical details: - Designed for 135 kg/h for 7 machines - NEW PRICE of the system: €115,000 Model: CKT 500F, frequency-controlled version Dodpoy Amr Eefx Aptjcl - 500 cubic meters/hour dry air - Touch panel control expansion for CKT/EKO dryers - Control system expansion integrated as a conveying system in CKT/EKO dryers, up to 16 points of demand - Containers: 1 x 200 liters; 4 x 150 liters; 2 x 60 liters, with cleaning door - Koch hopper heaters at 3 kW, 5 units - Koch hopper heater at 1.5 kW, 2 units - V2A extraction containers, 7 units - Stationary frames, 2 units - Economy system control for gentle material drying and maximum energy savings - Empty suction valves NW 40, double empty suction, 7 units - And much more...

Condition: good (used), Year of construction: 2015, 377 USED HB-TECHNIK - External/Internal Flour Silos. Year of manufacture: 2015. EXTERNAL DIMENSIONS (in cm): - External silo: 24-25 tons capacity, dimensions: 290x290 cm, height: 850, - Internal silo: 2 x 4 tons, dimensions: 210 x 155 cm, height: 320, - Internal silo: 1 x 2 tons, dimensions: 100x150 cm, height: 320. EQUIPMENT: - Stainless steel tanks and piping, - 2 flour discharge stations, - Water cooler (for ice-cold water) and water dosing, - Flour dust collector, - Control panel, Dcedpfjy Sgv Nsx Aptjl - Documentation. IMPORTANT: The silos' capacity can be increased to approximately 6-7 tons each. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 2021, Silos 120 x 120 x 141 cm [L x W x H] with a capacity of approx. 1000 l complete with Koch Technik plastic feeders for the central system, Dcodpfx Apozl Szujtsl 3 pcs. 2008, 2010, 2021.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: WL-01990-21, Industrial heater for oil & gas, 19,000 m3 per hour. Consumption: 302 kW. Dcodezyubyspfx Aptsl The burner is a Riello burner, and the gas valve unit is from DUNGS. In new condition.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Dsdsx E Rdwspfx Aptjcl Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: excellent (used), Year of construction: 2017, Koch Technik safety (protective) filter type SA3. Dcjdpfx Apjzkutdjtjl Its main tasks are: -Vacuum pump protection: Protects blowers and suction pumps against the ingress of fine dust, plastic residues or impurities that could lead to engine failure or seizure -Material dust removal: Filters return air from feeders and material separators, ensuring the cleanliness of the entire pneumatic system. These devices are usually installed in transfer lines before the vacuum generator (pump), most often in granulate dryers (e.g. CKT series) or central raw material feeding systems for injection molding machines and extruders. 4 pieces available - years 2008, 2008, 2010 and 2017 Sold complete with 4 Koch pumps and controls

Year of construction: 2019, condition: excellent (used), The Compact Series The new Wanner granulators in the C’s series (“C” stands for “compact,” “s” for “silent,” i.e., noise-optimized) offer practical solutions for virtually all challenges associated with the in-line recycling of sprues and rejected parts during the production process. Thanks to their modular design, the C’s series granulators can be easily adapted to specific applications or operational requirements. Depending on the method of sprue feeding, the discharge of regrind, or the specific injection molding machine being used, the Wanner C’s series offers optimal solutions tailored to your workflow through a wide range of standard components. Optimized cutting geometry and low rotor speeds ensure high-quality regrind with minimal dust content, while sound-insulated feed hoppers and a grinding chamber design optimized to minimize structure-borne noise and vibration contribute to low noise levels. The generously sized gearbox ensures a long service life for the granulators while also allowing for extremely compact dimensions. The grinding chamber can be opened quickly and easily—saving time and costs, for example, during cleaning for color or material changes. Advantages of the C’s Series Easy adaptation to specific applications via a modular system Compact design requires minimal floor space next to the injection molding machine Solid cast/steel housing mounted on swivel casters Robust motor/gearbox unit for long service life Significantly reduced noise levels thanks to a staggered-cut rotor and a grinding chamber design optimized for vibration control. Easy operation and cleaning of the mill save time and costs Improved intake of bulky sprues and regrind parts due to optimal rotor geometry Grinding chamber with hardened inserts for minimal wear when processing glass-fiber reinforced material High-quality, low-dust regrind achieved through optimized cutting geometry. The co-rotating disc in the side wall reduces friction, thereby minimizing heat buildup and material degradation. Blades easily resharpened without special fixtures Sound-insulated feed hoppers with safety guards Technical Data Manufacturer: Wanner Type: C17.26sv Grinding chamber opening: 170 x 260 mm² Rotor diameter: 170 mm Rotor blades: 12 Stator blades: 2 Throughput: 20–25 kg/h Screen perforation: 3–8 mm Voltage: 400 V / 50 Hz Collection bin volume: approx. 6 l Suitable for glass-fiber reinforced material (standard) Control system: Contactor control with overload protection switch Electrically redundant design with self-monitoring safety relay compliant with EN 12012 5 m power cable Weight: 155 kg Year of manufacture: 04/2019 Product video "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Dodpfx Apozc Nydotocl Find more items—new and used—in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2019, Overview This keg handling package consists of a M+F Keg Technik Monomat + RMT keg washing system, a keg filling unit, and a large quantity of stainless steel kegs in various sizes, complemented by beer taps. The system is suitable for small to medium-scale brewery operations, enabling cleaning and filling of kegs for beer distribution. The washer was manufactured in 2019 and offers a compact and efficient solution for keg processing. Technical data - Keg washer manufacturer: M+F Keg Technik - Keg washer model: Monomat + RMT - Year of manufacture: 2019 - Capacity: approx. 12 kegs/hour - Keg filler: Included (manufacturer unknown) - System type: Semi-automatic keg washing and filling setup Equipment Djdpfx Ajy D Ertsptecl - Keg Technik Monomat + RMT keg washer - Keg filling system (standalone unit) - 195 x 30 L stainless steel kegs (Type S/A) - 39 x 50 L stainless steel kegs (Type S) - 22 x 20 L stainless steel kegs (Type A) - 22 x 10 L stainless steel kegs (Type S) - 10 x beer taps (various manufacturers)

Year of construction: 2017, condition: like new (used), Set for robotic laser welding Scope of supply: 1 x IPG YLS-4000 4KW output laser (2017). Fiber core 300 microns and 30 meter length, LCA LCA. Optical coupler inside. Profinet interface. Power ON work time : 32832 hours 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD with air knife. Dcodpfx Ajrfucqeptjl Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: used, Year of construction: 2011, Overview This M+F KEG-Technik MICROMAT M 1/1-F KeyKeg is a semi-automatic filling machine for one-way KeyKegs, built in 2011 by M+F KEG-Technik (Bottrop, Germany) and used in a Belgian brewery. Dedpfx Apozrihxstjcl The machine fills 20 l and 30 l KeyKegs at 50-60 kegs per hour. It became redundant when the brewery switched its production from one-way KeyKegs back to returnable stainless steel kegs. It has already been dismantled, is in storage and can be inspected on request. Technical data - Manufacturer: M+F KEG-Technik - Model: MICROMAT M 1/1-F KeyKeg - Year of manufacture: 2011 - Machine type: semi-automatic KeyKEG filling machine - Capacity: 50-60 KeyKegs per hour - Container formats: 20 l and 30 l KeyKEG - Fitting type: KeyKEG fitting - Connection voltage: 230/400 V, 50 Hz Equipment - EC Declaration of Conformity (Machinery Directive 2006/42/EC) - Technical documentation Condition Used. The machine has already been dismantled and is stored. Availability Immediately available. Location: Belgium. Handling and truck loading are included.

Condition: good (used), Year of construction: 2015, functionality: fully functional, The conveyor belt from trio-technik is for sale. The following are the technical details: Djdpfx Apjzqz Stetjcl Length: 3500 mm Useful width: 700 mm Blue plastic slat belt Heat resistant up to 90 degrees Celsius Height adjustable: 600 mm - 1100 mm

Condition: excellent (used), DAGE Series 4000 PXY – Bond Tester / Shear & Pull Tester for Connection Strength Testing Dcsdpfx Aezma Skjptel

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, The separating device from trio-technik is for sale. This unit is designed for the separation of objects with various geometries. Length: 950 mm Width: 700 mm Height adjustable: 700-1380 mm Dedpfx Aex Dm Rzsptjcl Possible gap width: 50 mm Tilt angle: max 20 degrees Drive/three-phase current: 400V 50Hz Power consumption: 0.09 kW/h Speed adjustable.

Condition: excellent (used), Offered for sale is a high-quality Koch material station for centralized material supply in plastics processing. 3 units with frame available; 1 unit without frame. Dcjdpszxpipefx Aptel The system features a robust design and is built for continuous industrial use. Thanks to the use of hardened steel elbows, the material station is exceptionally wear-resistant and ideally suited for abrasive plastics.