Used Hundegger K3 for sale (924)

Condition: used, Year of construction: 2005, functionality: fully functional, I am offering a rare Hundegger K3 for sale. The machine is operational and can be inspected by appointment. The K3 was manufactured in 2005 and comes with the following equipment: - Infeed and transfer cross conveyor - Offcut holder in front of the saw - Underslung swivel crosscut saw - 5-axis universal milling unit (UF5) - Combination support for vertically operating tools 2 reinforced vertical drilling units - Combination support for horizontally operating tools Slotting unit 1 standard drilling unit 1 drilling unit swiveling at 45 degrees - Fully automatic hydraulic beam turning station - Marking unit on stop side - Marking unit on operator side - Underside marking device - Additional monitor in the outfeed area - Deposit table for short components - Top feed roller The machine must be dismantled by the buyer. Pickup only from company premises. Djdoyvplnjpfx Am Tokp

Condition: used, Year of construction: 2005, functionality: fully functional, Excellent condition, low mileage machine! There is a video of it in action. Dodpfx Ajzgvunom Tokp

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, SPM2 - 2600 - 2600 Can be inspected during operation. Training possible on request - Automatic panel infeed - Lifting table 2600 x 6000 Aggregates Dkjdsu H Uqcjpfx Am Tep - SPM-FF6-23U Finger router 6 Kw max. 23170 rpm - SPM-KSK3 4-axis circular saw unit 3 kW saw blade 220mm - SPM-5F 5-axis milling unit 6.0 kW (special motor 24,000 rpm - 5-axis unit) - SPM-IJ Ink marking system - InkJet HP system Component delivery - SPM-SHP-6000 Special lifting table Panel removal 2600 x 6000 - Access guarding of discharge area

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 11193, functionality: fully functional, type of input current: three-phase, workpiece length (max.): 13,000 mm, workpiece width (max.): 450 mm, workpiece height (max.): 280 mm, overall weight: 14,000 kg, year of last overhaul: 2019, Equipment: CE marking, The machine underwent a complete factory overhaul by Hundegger in 2019. The machine will be available from April 2027. Until then, it can be viewed in full operation at our facility by appointment. Machine equipment: Infeed roller conveyor with a 5-chain cross-transfer system Rotating under-table saw Under-table saw hood 4-axis universal milling unit (UF4) Combination support for vertical tooling Vertical milling unit, 5.5 kW 2 drilling units, 2.2 kW each Combination support for horizontal tooling Drilling unit, 2.2 kW Swiveling horizontal drilling unit, 2.2 kW Dsdpfozi Spmsx Am Tokp Milling unit, 3.0 kW End marking device Fully automatic beam turning station "Two-hand system" transport and positioning system 2.65 m outfeed roller conveyor 6-arm stacking table Electronic control system Protective cover above the waste disposal area

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, For Sale: Hundegger K2i Blockhouse Unit – Fully Refurbished, Excellent Condition I am offering a Hundegger K2i Blockhouse Unit in excellent condition. The unit has been professionally refurbished and is ready for immediate use. Key features: Dsdpfjzgcf Tsx Am Tokp * Fully refurbished and very well maintained * One of the milling heads is brand new (replacement value approx. €5,000) * Reliable and precise operation * Easy to integrate into existing machines The unit can be removed from its current machine and installed into any Hundegger K2i, K2, or K2 Industry machine, making it a cost-effective solution for upgrading or replacing an existing unit. For further information, technical details, or additional photos, please feel free to contact me.

Year of construction: 2006, condition: ready for operation (used), Wood production line manufactured in 2006. This HUNDEGGER K2-4-450 features a maximum log length at infeed of 13 m and at outfeed of 12 m. The machine includes a fully automatic beam turning station and various cutting and drilling units for versatile operations. If you are looking to get high-quality timber framing capabilities, consider the HUNDEGGER K2-4-450 machine we have for sale. Contact us for further details. • Condition/use: Good condition; regularly maintained; used only in own operations; no multi-shift operation • Color: RAL 5012 blue • Capacity: • Maximum log length at infeed: 13 m • Maximum log length at outfeed: 12 m • Installed working units: • Under-table swivel crosscut saw • 4-axis universal milling unit UF4 • Roller cutter • Finger cutter • Dovetail cutter • Combination support for vertical tools • Drilling unit 2.2 kW • Drilling unit 3.0 kW (reinforced) • Combination support for horizontal tools • Additional drilling unit 2.2 kW • Slotting unit • Marking unit Additional equipment • Infeed cross conveyor, 5 horizontal strands, 2.2 m, with flat belt chain • Infeed strand with shaft extension • Extension stand with feed mechanism • 6-arm discharge table • Fully automatic pneumatic beam turning station • Finished wooden support surfaces • Label printer Dkedpfeza A Ddox Am Tjp

Condition: used, Year of construction: 2000, machine/vehicle number: 11197, Hundegger K2-450 Cutting Machine – Year of Manufacture 2000 Dkedpfjzbnkfsx Am Tsp For sale is a used Hundegger K2-450 cutting machine, manufactured in 2000, from an ongoing operation. The machine was used for processing wooden components in timber frame and timber house construction and is currently located at Norges Hus Nova OÜ in Perila, Estonia. The machine can be inspected in operation by appointment. Technical Data: Manufacturer: Hundegger Model: K2-450 Year of Manufacture: 2000 Machine No.: 11197 Condition: Used Location: Kuivati tee 10, Perila, Harju County, Estonia Equipment / Notes: Complete infeed and outfeed system available Machine used in a production environment until recently Sale due to modernization or restructuring of production Dismantling and loading upon agreement On-site inspection is highly recommended The machine is ideal for carpentry workshops, timber construction companies, and businesses in the cutting field that are looking for a proven and robust Hundegger machine. We are available to provide further information, technical details, additional images, or to arrange an inspection appointment.

Condition: good (used), total length: 24,000 mm, overall weight: 11,000 kg, HUNDEGGER P10 – CNC AUTOMATED TIMBER PROCESSING CENTER For sale: a Hundegger P10 machine designed for processing timber components. The machine is in good working order and is currently in production. Until July 15th, there is an opportunity to view the machine in operation and check all its functions before purchase. Key information: * Machine in continuous operation * Demonstration of operation possible * CNC control Dsdpfsza T Sxsx Am Tokp * Processing of roof truss elements, frame structures, and other carpentry components * High accuracy in performing joints * Design known for its durability and ease of maintenance Unlike many machines offered after disassembly, here the buyer can verify the technical condition during normal operation of the facility. The machine is available for inspection by appointment. More information, photos, and videos of the machine in operation will be provided to interested parties.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting width (max.): 450 mm, working length: 16,000 mm, working width: 450 mm, Equipment: safety light barrier, A well-maintained Hundegger K2 cutting machine with a planer is offered for sale. The machine is fully functional and has been serviced several times a year by Hundegger. The machine is still in operation until the beginning of November and can then be dismantled by the buyer. =Equipment: = Machine type K2-5-450 - Wood length, feed and discharge max. 16m - Color RAL 5012 blue - Feed cross conveyor, 6 strands, horizontal, 2.2 m with flat belt chains - Extendable wood discharge - Undercarriage swivel miter saw - Universal milling cutter, 5-axis UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically operating tools (finger cutter, drilling unit 2.2kW) - Combination support for horizontally operating tools (drilling unit 2.2kW, drilling unit 2.2kW) - Marking device at the front - Discharge table, 6-arm - Beam turning station, hydraulic Dkjdpezb I Iwefx Am Tsp - Enhanced wood support surfaces (the vulnerable plastic coating has been replaced with maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - Extension roller conveyor, 10m with feed roller - Transfer cross conveyor, 7 strands, 3.5m with flat belt chain - Connection to planer HMD = Planer HMD - Fully automatic 4-sided planing and chamfering - Planer motors 7kW - Automatic thickness planer adjustment - Direct planer control - Planer machine directly integrated after the cutting machine = Other - Inspection possible by appointment. - If the machine is being dismantled, it can of course also be inspected in the operating environment. - A new K2 with a planer and comparable equipment costs approximately 800,000 euros. - New spare parts in stock can be included at a favorable price. - The machine runs perfectly, however, no guarantee or liability is assumed for future damages. - Ideal machine for medium to large carpentry or sawmill operations. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - If you have any questions, please call us from Monday to Friday from 7:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m. or send an email at any time. - Unfortunately, I cannot provide a mobile phone number, as the advertisement would otherwise be blocked.

Condition: used, Year of construction: 2004, Colour: Blue Weight: 8.000 kg Price: On request - Details: - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 Dsdpfx Aeyy Nnqom Tekp - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Fuse [A]: 63 - Power [kW]: 15.0 - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2005, For sale is a used HUNDEGGER SC1 machine for processing prefabricated house elements. Year of manufacture: 2005 Automatic feeding system with transport chains, for workpieces up to 10 m in length. Saw blade diameter: 650 mm Minimum workpiece length: 800 mm Waste conveyor belt Drilling unit with quick-change system, vertical Milling unit, vertical Turret milling unit for 4-axis machining Available from October 2026 Dkjdpfx Aszda E Tom Top In very good condition.

Condition: good (used), Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 7105, feed length X-axis: 16,500 mm, feed length Y-axis: 1,300 mm, workpiece weight (max.): 1,000 kg, cutting height (max.): 300 mm, total length: 45,300 mm, total height: 5,700 mm, cutting width (max.): 1,300 mm, total width: 16,800 mm, control cabinet width: 730 mm, saw blade diameter: 800 mm, overall weight: 31,000 kg, control cabinet length: 4,500 mm, control cabinet height: 2,500 mm, working length: 20,000 mm, working width: 13,000 mm, Equipment: safety light barrier, HUNDEGGER K2-Industry 1300 fully automatic sizing machine, consisting of: 1 ABM-I125 1 K2-Industry 1300 basic equipment, including: - Saw unit 13 kW - Automatic beam turning station - Control panel and switch cabinet - Safety devices 2 ROB-2500 1 Hundegger production program CAMBIUM 3 ABM-1272 1 Machine frame K2-Industry 1250 - 15.40 m 4 ABM-BO13 1 Transport and positioning device "Two-hand system" - with servo drive in the positioning carriage Djdpfx Aoza Ehrom Tjkp 5 ABM-3061 1 S-axis universal milling unit (UF5) with 15 kW motor 6 HH-8562 1 Remote maintenance Base machine price 7 ABM-1232 1 Machine frame K2-Industry 1250 - special length - price per meter 8 ABM-1816 1 Extension and encapsulation - Machine enclosure including preparation for dust extraction 9 ABM-2151 1 Infeed cross conveyor and infeed roller conveyor for max. wood length 20 m (8 strands), including servo motor 10 ABM-2800 1 Zero stop for pre-cut components 11 ABM-2851 1 Rough wood holder in front of the universal saw (multi-length processing) 12 HH-8501 1 Adjustable safety impact plate - infeed roller conveyor 13 ABM-3401 1 Horizontal saw 11 kW (saw blade max. 900 mm) 14 ABM-3651 1 Revolving milling unit - vertical (installed from above) 15 ABM-5550 1 Universal cutter UBF 280 16 ABM-BO41 1 Combined support for vertically operating tools (Y-axis electric) 17 ABM-5091 3 Drilling unit 3.0 kW hydraulic - drilling direction vertical 18 ABM-5400 2 Vertical finger milling cutter 5.5 kW 19 ABM-B61 1 Combined support for horizontally operating tools 20 ABM-5030 1 Drilling unit 2.2 kW - drilling direction horizontal 21 ABM-5220 1 Pivoting drilling unit 45° (3.0 kW) - drilling direction horizontal 22 ABM-5751 1 Slotting cutter 7.5 kW - on the stop side 23 ABM-5500 1 Longitudinal and transverse groove milling cutter 24 ABM-5776 1 Slotting cutter 7.5 kW - on the operator side with pre-positioning (Y-axis) 25 ABM-4101 1 Double combined support - (on the stop and operator side) 26 ABM-5041 4 Drilling unit 2.2 kW with hydraulic feed for double combined support 27 ABM-6000 1 Marking device at the rear (on the stop side) 28 ABM-6040 1 Marking device at the front (on the operator side) 29 ABM-6100 1 Marking and labeling device at the bottom 30 ABM-6180 1 Marking and labeling device at the rear (on the stop side) 31 ABM-6300 1 InkJet 4 system HP - on the stop side 32 HH-8610 1 Label printer at the control panel 33 ABM-2900 1 Wood removal hood = flap for removing short components on the under-table swiveling miter saw 34 HH-8640 1 Additional cost for a mobile control panel on rollers 35 HH-8645 1 Direct control of planing machines 36 ABM-7750 1 Line laser for component referencing 37 ABM-8050 1 Additional wood storage point 38 ABM-8300 1 Feed roller from above 39 ABM-8416 14 Extension roller conveyor with adjustable rollers, max. width 1300 mm 40 HH-8521 1 Adjustable safety impact plate - discharge roller conveyor 41 AH-9001 2 6-strand transfer cross conveyor with wide flat belt chain HUNDEGGER Pick & Feed System designed for the following workpiece dimensions: Length: 2,000 - 15,000 mm Width: 100 - 680 mm Thickness: 60 - 300 mm Max. part weight: 400 kg Performance max.: 1 cycle in 1.5 min Stack dimensions: Length: 2,000 - 15,000 mm Width: up to 1,200 mm Height: up to 1,200 mm consisting of: Pos. 1 Lifting gate and package infeed Pos. 2 Portal system with suction gripper Pos. 3 Spacer rack Pos. 4 Safety technology Pos. 5 Stack pattern input aid Pos. 6 Increase max. workpiece weight to 1000 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: Hundegger SC 480 Speed-Cut – Year 2023 We are selling our fully automatic cutting system, the Hundegger SC 480 Speed-Cut, from 2023. Machine equipment (excerpt): - SC 480 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production software CAMBIUM - Line laser for component referencing - Infeed and outfeed cross conveyor 10.1 m, 7 strands (for timber lengths up to 13 m) - Hydraulic lifting table for timber length 13 m (6 t) - Vertical finger milling cutter 6.5 kW and 10 kW HSK spindle - 4-axis revolver milling cutter 7.5 kW universal unit - Drilling unit 3.0 kW hydropneumatic - Grooving unit - Inkjet labeling system (max. 101.6 mm) - Label printer system on the component discharge area - Discharge table, pneumatic, for timber lengths up to 13 m - Central lubrication system Djdpfx Amsza Dzdo Tokp - Various other options and units General: Year of manufacture: 2023 Operating hours: low (machine from ongoing operation) Regularly maintained by Hundegger Condition: very good Contact: Philipp Schöb, Schöb AG, Haagerstrasse 80, 9473 Gams

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 9076, cutting height (max.): 160 mm, cutting width (max.): 450 mm, power: 15 kW (20.39 HP), TECHNICAL DETAILS Max. cutting width: 450 mm Max. cutting height: 160 mm Infeed table length: 8,200 mm Outfeed table length: 8,900 mm Max. infeed length: 8,000 mm MACHINE DETAILS Main motor power: 15 kW Power: 15.0 kW Control: Windows 10 Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 23,000 x 5,200 x 2,700 mm Weight: 8,000 kg EQUIPMENT Dodpfx Amsy Nx Eqo Tokp Safety light curtain Safety fence Waste conveyor belt Label printer Marking pen

Condition: ready for operation (used), Year of construction: 2002, This 4-axis HUNDEGGER K2 was manufactured in 2002, designed for efficient wood beam processing. It features a loading area with motorized chains, a maximum beam length of 13,500 mm, and a working section up to 440 mm × 240 mm. Includes a circular saw and universal milling unit, both with 4 axes, alongside versatile drilling units. Ideal for complex woodworking tasks. Contact us for more information about this machine. • CNC designed for wood beam processing • Maximum incoming beam length: 13,500 mm • Maximum outgoing beam length: 12,000 mm • Maximum working section: 440 mm × 240 mm • 2 independent clamps for transport and positioning (“two-hand” system) • Circular saw unit, Ø 750 mm, 4 axes • Universal milling unit with double output, 4 axes • Lower vertical drilling unit with multi-purpose support • Horizontal drilling unit with multi-purpose support, tilting • Long horizontal chain saw unit, 700 mm, with counter-support system • Includes tool change equipment • Independent control panel • CE compliant Additional equipment • Loading area with 7 motorized transverse chains • Unloading area with 6 arms for parking and storage of parts Djdpfxoyaq Dxo Am Tskp

Condition: used, Year of construction: 1995, functionality: fully functional, For sale: Hundegger P10 machine, in continuous use. The machine was purchased used, directly from the manufacturer in Germany. Ready for further operation. Possibility to inspect the machine live during operation. Dkjdpfoxlla Dsx Am Top

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse grooving mill Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector Dkedpswuppwjfx Am Tjp 5-arm wood rack Safety devices and protective guards

Condition: like new (used), Year of construction: 2015, I sell the automatic CNC working centre for wooden constructions Hundegger K2i. Almost new machine. Year 2011. Under-table rotary saw with saw blade from 750 mm to 800 mm, 360 degree rotation, servohydraulic tilting 0 – 65 degrees universal 5-axis unit equipped with cylindrical milling cutter, end mill and end mill, milling head diameter 350 mm x 100 mm end mill combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min 460 mm, machining depth min 300 mm combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min. 460 mm, machining depth min. 300 mm positioning and gripping of the material using arms, which, while the material is measured, transported to the desired location, the arms keep the processed element as close as possible to the tool that processes it for stability. the processed material can be rotated automatically tolerance +/- 2 mm at a length of 13 m Fully automatic wood input with input roller track and input and sliding cross conveyor K2i: Under-table tilting cross-cut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Kombisupport for vertically working tools K2i: Drilling device (2.2 kW) – vertical drilling direction K2i: Kombisupport for horizontally working tools K2i: Drilling device (2.2 kW) – horizontal drilling direction K2i: Marking tool (rear or on the user side) K2i: Fully automatic element rotation – hydraulic K2i: Transport and positioning system “two-hand system” K2i: Electronic connection K2i: Roller track for removal wooden elements with a pusher K2i: 5-arm storage table K2i: Safety device K2i: Higher quality upper surface of the machine K2i: Extension of the K2i frame to 13.56 m K2i: 5-axis universal milling unit - UF5 (increase to 4-axis) K2i: Remote maintenance (including portable video camera) K2i: Dovetail milling machine (with rotating knives) 60x28x16.5 Dsdpoxtxkxefx Am Tekp Suitable for wooden house constructions! Available immediately.

Condition: used, Year of construction: 2010, machine/vehicle number: 9532, total height: 3,000 mm, total length: 30,000 mm, total width: 3,000 mm, Hundegger SC-3 – CNC Through-Feed Processing Center (Year 2010) Hundegger SC-3 CNC Through-Feed Processing Center For sale is a Hundegger SC-3, year of manufacture 2010, a proven and high-performance CNC through-feed processing center for modern timber construction and industrial wood processing. Djdpox Rkrfefx Am Tjkp This machine is ideally suited for timber framing, prefabricated housing production, and high-capacity woodworking operations, offering excellent precision, reliability, and productivity. Key Features: CNC-controlled through-feed processing center High level of automation and efficient material flow Accurate and reliable cutting of timber components Versatile processing options – with suitable optional units or by retrofit / upgrading, additional operations such as drilling, milling, slotting, marking, and labeling are possible Robust, durable design by Hundegger Technical Overview: Manufacturer: Hundegger Model: SC-3 Year of manufacture: 2010 Condition: used, in operational condition Location: Estonia Price: on request / according to listing The Hundegger SC-3 represents a cost-effective solution to increase throughput, precision, and process reliability in timber processing. 📩 Further technical details, documentation, and on-site inspection available upon request.

Year of construction: 1993, condition: good (used), Hundegger planer Year of manufacture 1993 4 sides planer and chamfering machine Dksdol Hw Ehepfx Am Tjp

Condition: good (used), Year of construction: 1994, functionality: fully functional, FOR SALE HUNDEGGER P10 Dkodewhn A Njpfx Am Top ROOF STRUCTURE PROCESSING MACHINE. THE MACHINE IS IN GOOD CONDITION, IT WORKED UNTIL IT WAS DISASSEMBLED AND DRIVEN TO THE LOCATION WHERE IT IS WAITING FOR A NEW OWNER. IT WAS TAKEN OUT DUE TO THE ARRIVAL OF TWO NEW MACHINES FROM THE SAME MANUFACTURER. THERE ARE MANY NEW SPARE PARTS THAT ARE NOT INSTALLED. THE PRICE IS NOT FIXED AND CAN BE NEGOTIATED UPON ARRIVAL AT THE LOCATION DURING THE INSPECTION OF THE MACHINE

Condition: used, Year of construction: 1994, machine/vehicle number: 1301, functionality: fully functional, I am offering for sale a Hundegger P-10 woodworking machine, designed for processing roof beams. The machine is fully operational and still in use; demonstration under power is possible. Maximum cross-sections: 260 x 400 mm. Year of manufacture: 1994. Included with the machine: - Under-table cross-cut saw - 2 marking pencils - 3 large milling cutters - 1 finger joint cutter - 2 drill bits + nail drill - 4 chain mortisers Dksdpjw I Emkofx Am Tjp Service carried out on 10/6/2025. A large number of spare parts are included. Please do not hesitate to contact me for more information.

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 24,000 kg, I am selling a Hundegger K2i carpentry centre from 2008. The machine is in very good condition and well equipped, including: - 13 m infeed table - Beam clamps with chain drive - 5-axis sawing unit with new 800 mm saw blade - 5-axis milling unit with finger cutter, new 60 mm cutter, and new dovetail cutter - Horizontal and vertical drilling - Additional end milling unit for rafter tails from underneath - Slotting attachment with a complete set of 8 and 10 mm chains Dedpfx Amexx T Rde Tekp Note: The slotting attachment is rare equipment, used for the production of trusses with concealed plates. The machine is in excellent technical condition, regularly serviced, and has been in continuous operation. We are selling due to purchase of a much newer unit. Availability: immediate. We offer disassembly and installation for €10,000.

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 11470, functionality: fully functional, workpiece width (max.): 450 mm, Hundegger K2 in very good condition, overhauled, rebuilt, and commissioned by Hundegger. Since then, it has only run for about 20 hours and was professionally dismantled and stored in a heated hall. Dkjdpfx Amewhpavj Tjp

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, working width: 450 mm, Equipment: safety light barrier, TECHNICAL DETAILS Dkedeyfhi Nepfx Am Top Working width: 450 mm (limited processing up to 520 mm possible) EQUIPMENT - Safety light barrier - Saw - Universal milling unit with roller cutter - Dovetail cutter - Finger joint cutter - Drilling units: 1x horizontal + 2x vertical - Slotting device - Marker on stop side - Automatic beam turning station - Wood length is now processed in the feed up to 16m - Control computer with EKP program included