HUNDEGGER K2 4 assi

HUNDEGGER K2 4 assi

Year of construction: 2011, condition: used, functionality: fully functional, Finger jointing line for cross sections up to 200 cm² (80/240 mm or 100/200 mm), with the following. components: 1. HOWIAL tilt unstacking - SH/4t - 1,75x1,75x6,00m - 4t - short. Length 2,50 m, semi-automatic separation of the package. For tilting the wood pile up to 45°. Electric motor drive. stack dim. max. 1,75 x 1,75 x 6,00 m max. stacking load 4 t shortest wood length 2,5 m 2. HOWIAL - VE 1 lamella separator for crosscut saw. With pneum. controlled tongues, on which the material is marked for defects, deposited on the roller conveyor below. 3. HOWIAL - evaluation roller conveyor RO-1 digital wood moisture measuring, control and recording system for autom. recording and control of wood moisture in cycle measuring method according to electric resistance principle. 4. gann DMT-8 dig. Wood moisture measuring, control and recording system for automatic detection and control of wood moisture in the cycle measuring method according to the electrical resistance principle. Plant in large switchboard complete with ink jet printer. 5. HOWIAL - crosscut saw AS-30 B pneum. Under table crosscut, with 2 autom. feed units, autom. crosscut. Special photocell control for detection of fluorescent line markings. Automatic waste disposal possible. Saw motor power 7,5 kW saw blade diameter 700 mm feed drive approx. 2 x 1,5 kW Air pressure 8 bar feed speed max. approx. 60 m/min. 6. HOWIAL - conveyor belt cut off waste, with studded belt and guide plates belt width 350 mm belt 2000 mm long belt speed 0,4 m/sec. 7. HOWIAL - double roller conveyor RO-2 6,00 m long incl. transversal transport, drive by round belt, all rollers driven. Cross transport chain conveyor. Ejection ± moisture right Transport speed adjustable 100 m/min. length approx. 6,00 m Width of rollers approx. 400 mm Diameter 112 mm 8. compact finger jointing machine Cook Bolinder The technical data are original from Cook Bolinder: wood width from 75 to 245 mm Timber thickness from 20 to 105 mm Input lengths from 1m to 6 m Cross sections from 30 cm² to 200 cm² Pressing force 5 - 22 to Spindle diameter 50 mm tine profile 15/15 spindle speed approx. 6000 upm Total electrical connected load approx. 62 kW Machine weight approx. 9 to. Gluing OEST comb system for PU Modern Telemechanique SPS control. 9. HOWIAL - Roller conveyor with destacking system Driven roller conveyor with autom. ejector and hydr. driven destacking arms. Technical data: H: 920 mm L: approx. 12.000 mm 10. safety fences incl. circuit breaker 11. finger joint testing machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385 Support distances freely adjustable, attached dimension scale, autom. calculation of support distances in the software. Fully automatic test procedure by mouse click on PC (not included). Alternatively, the test procedure can be started by key operation on the front panel. Connection of any commercially available PC or laptop (Win 2000/XP) via the supplied RS232 serial cable. Fully automatic measured value logging as well as automatic logging in MS-Excel with graphical display. Representation max. wood width: 300 mm max. wood thickness: 140 mm max. compression force: < 100 kN max. support length: 2100 mm Measuring accuracy WITHOUT DISMANTLING Psdpji Ezx Defx Afhepl

Condition: good (used), functionality: fully functional, Complete Weinig planing line consisting of: Package intake. Automatic de-stacking of packages. Batten separation. Cross conveyor with reject sorting. Feed to twin band saw. Singling out before the planing machine infeed. Through-feed crosscut saw. Infeed to the planing machine. Weinig 22 B planer with 8 spindles. Electronic feed with frequency converter up to 80 m/min. In 2023, the planer was equipped with a new frequency-controlled feed, new table, and new wear plates. Outfeed from the planer. Weinig stacking system with batten magazine. Also Almab stacking system. The planing line is fully mechanized. Podpfxewvqvbj Afhspl Specifications: Wood length from 2 to 6.10 m. Wood thickness from 10 to 120 mm. Wood width from 40 to 220 mm. Package size input: 1.20 x 1.30 m. Output: 1.20 x 1.20 m (W x H). Well-maintained system. Regular servicing.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 11470, workpiece width (max.): 450 mm, Hundegger K2 in very good condition, overhauled, rebuilt, and commissioned by Hundegger. Since then, it has only run for about 20 hours and was professionally dismantled and stored in a heated hall. Psdpfx Afewhpavehepl

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 11441, At the moment we are working with the following version: 9.23.12.102733-12 The equipment of the K2: a 4-axis universal milling machine 2 drilling rigs a finger cutter below a slotter Hydraulic beam turning station Pedpfx Aowvih Asfhjpl Machine is fully working, can be visiited upon agreed time. avaible from 30/11/2025 Disassembly from our company and loading to truck, and is included in the price. Sale is as a used machine with exclusion of any warranty.

Condition: used, Tenoning spindle 1 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Weinig Unicontrol 12 with radial and axial NC spindles, VARIO table, and milling carriage ..... Ppsdpexwdv Iofx Afhjl Machine still in operation available for viewing! Optionally available with used tools and window design software for data transfer to the Unicontrol 12! Technical Data Summary (Please inquire about any additional accessories included) ..... Crosscut Saw ..... > Electronic crosscut saw, continuously adjustable horizontally > Number of tools: 1 > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for detecting the saw cut > Axial adjustment range: 150 mm, electronically continuously adjustable NC axis > Radial pneumatic adjustment range: 8 positions, e.g., for edge rounding from above Rounding Unit ..... > Position: horizontal, below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment range mechanically coupled to the cross-cut saw. > Radial adjustment pneumatically controlled on/off Electronic length stop ..... > Length 4,100 mm 1. Tenon and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Follow-up counter, the entire clamping length is countered Transfer belt ..... For transferring parts to the longitudinal processing area, including double part separation before the infeed of the longitudinal processing area. 1. Profiling spindle (up- and down-axis rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm, continuously variable NC axis > Radial adjustment range: 80 mm, continuously variable NC axis > Spindle speed: 6000 rpm > Minimum tool travel circle: 140 mm > Maximum tool travel circle: 232 mm > 2 feed rollers, pneumatically controlled axially opposite the spindle, 8 positions 2. Profiling unit (grooving unit from above) ..... > Position: horizontal, top > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range: 30 mm 8 positions > Radial travel 125 mm, 8-station turret > Spindle speed: 9,000 rpm > Maximum tool travel: 130 mm 3rd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial travel 350 mm, continuously variable NC axis > Radial travel 80 mm, continuously variable NC axis > Spindle speed: 6,000 rpm > Minimum tool travel: 140 mm > Maxi...

Condition: excellent (used), Year of construction: 2000, Schmidler CNC carpentry line - Model: SAB 4 R - Year of production 2000 - DOS-based software, production files in BTL format - Line length 30 meters - Additionally a spare saw - Video available The line is 100 % FUNCTIONAL Ppodpfx Aeulvldofhol

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, working width 300mm working height 140mm feeding rate 200m/min spindles speed 6000 RPM spindles diameter 50mm spindles set: 1. bottom - 22kW 2. top - 22kW 3. right - 18,5kW 4. left - 18,5kW 5. right - 18,5kW 6. left - 22kW 7. top - 22kW 8. bottom - 22kW Podpfx Aovu Sayjfhjpl 9. top - 22kW 10. bottom - 22kW 11. bottom - 22kW

Condition: good (used), Year of construction: 2010, functionality: fully functional, Weinmann Butterfly Turning Table Dimensions per table: 12.0m x 3.20m 1 fixed table with pneumatic clamps and extendable counter-clamps 1 movable table with longitudinal transport rollers incl. cable trays and floor rail Fully functional. Ppjdpexdm H Aofx Afhol Immediately available, partially already dismantled.

Condition: ready for operation (used), Year of construction: 2004, Characteristics: The Rondamat 168 is extremely simple and as versatile as possible to operate. The machine sharpens straight planing knives, milling tools and circular saws. 40mm shaft Ppsdpeh Txfdsfx Afhel Wet grinding Maximum tool diameter 350 mm Disc diameter 150 mm Maximum tool length 240 mm Tooth pitch min. 32 mm Tooth pitch max. 20 mm Main motor power 1.1 kW Total connection 1.5 kW

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1779, The K1 was rebuilt in 2020 and equipped with the latest safety features. It is now dismantled and can be loaded immediately. Ppjdpsx Ehmajfx Afhol