Used Hvac P20 / P30 Profile Saw Electric/Air for sale (55,618)

Condition: new, Year of construction: 2026, CFM-01 MACHINE FOR CUTTING PROFILES The machine has been designed for cutting profiles used for P20 or P30 ventilation ducts and fittings. The cutting quality is very high, it does not leave any burrs after cutting. Cutting that can be made in any length thanks to the ruler adjustable from 0-1500 mm. The diamond blade used is many times longer than band saws. The machine has a system of pneumatic cylinders responsible for the movement of the disc and material pressure. Thanks to the foot pedal, it provides quick and convenient cutting of profiles. Nedpefwxxnsfx Ab Uelg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. Nlodpjzx Rz Hofx Ab Ueg The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Nlsdpfjwprmzjx Ab Ujg Saw unit with bottom feed for optimal cutting force

Condition: used, Double-Head Mitre Saw for Aluminium Profiles – Pertici Univer 403 P Main Features Double-head mitre saw for aluminium profiles Numerical control for managing cutting dimensions Cutting heads with rotation and tilting functions Automatic positioning of the movable head Pneumatic profile clamping system Suitable for aluminium window and door manufacturing Maximum cutting length: 3,200 / 3,300 mm Technical Data Blade diameter: Ø 400 mm Blade bore: Ø 30 mm Blade speed: 3,180 rpm Installed power: 3.1 kW Power supply: 380 V three-phase – 50 Hz Current consumption: 6.2 A Operating pressure: 6.3 bar Air consumption: 13.9 Nl/cycle Weight: 370 kg Applications Nodpfxozb Ehnj Ab Uelg Aluminium window and door manufacturing Doors and windows Curtain wall systems Light metal fabrication and construction work

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 units of recirculating air chamber furnaces, fast heating times, short process times, electric, 12-month warranty, available for immediate delivery. - Temperature 200°C, can be increased to 250°C! - Charging car, 5 units available, modification on request. - Homogeneous temperature distribution of +/- 10°C. - Internal dimensions (W x D x H): 3750 x 1400 x 2300 mm - External dimensions (W x D x H): 4850 x 1705 x 3880 mm - Usable volume: 11.6 m³ - Control system: S!MPAC with touch panel Nsdjy Tkfwepfx Ab Uolg - Program execution with a good sensor as a cascade control system - Temperature limiter - Signal tower - Directly accessible, with grid rails - Exhaust air volume flow: 140 m³/min - Electromagnetic door locking system - Rated power: 180 kW - Connection power: 241 kW!! - Weight: approx. 3500 kg - Documentation, CE declaration of conformity We would be pleased to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Furnace, Oven, Furnaces, Drying oven, Industrial oven, Drying cabinet, Heat oven, Heat cabinet, Recirculating air oven, Chamber oven, Heating oven, Chamber recirculating air oven, Tempering oven, Temperature oven, Recirculating air chamber oven, Hardening oven, Vötsch oven, Weisstechnik, Fusing oven, Curing oven, Post-curing of liquid crystal windows, CFRP support structure, Oven for glass, Glass tempering oven, Glass fusing oven, Glass hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 recirculating air chamber furnaces, fast heating times, short process times, electric, 12-month warranty, immediately available -Temperature 200°C, increase to 250°C possible upon request -Charging car, 5 units available, modification possible upon request -Homogeneous temperature distribution of +/- 10 °C -Internal dimensions W x D x H: 3750 x 1400 x 2300 mm -External dimensions W x D x H: 4850 x 1705 x 3880 mm -Usable volume 11.6 m³ -Control system S!MPAC with touch panel -Program execution with good sensor as cascade control -Temperature limiter Nlsdpfxjy Avqwe Ab Ujg -Signal tower -Directly accessible, with grid rails -Exhaust air volume flow 140 m³/min -Electromagnetic door lock -Rated power 180 KW -Connection 241 KW!!! -Weight approx. 3500 kg -Documentation, CE declaration of conformity We would be happy to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Furnace, Oven, Ovens, Drying oven, Industrial oven, Drying cabinet, Heat oven, Heat cabinet, Recirculating air oven, Chamber oven, Heating oven, Chamber recirculating air oven, Tempering oven, Temperature oven, Recirculating air chamber oven, Hardening oven, Vötsch oven, Weisstechnik, Fusing oven, Fusing, Postcuring, Post-curing of liquid crystal windows, CFRP support structures, CFRP support structure, Curing oven, Oven for glass, Glass tempering oven, Glass fusing oven, Glass hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Nsdoxvbvvopfx Ab Uolg Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: new, Year of construction: 2026, I am selling a KUSING SPS-500 bottom crosscut saw. This is a fully electric, robust crosscut saw without the need to use compressed air to operate the machine. Nedex Ut H Tjpfx Ab Uolg The machine offers an ideal solution for sawmills, primary processing of lumber, but also for any production that works with long prisms and needs to be precisely shortened to size, such as in the production of windows and doors. Thanks to the convenient, smooth stroke speed regulation, it is possible to simultaneously cut board material and prisms to size even with a weaker motor. Technical parameters: Motor power: 3 / 4 / 5.5 / 7.5kW Disc diameter: 500mm Cutting speed: 2 - 6s. Maximum cutting height: 150mm Maximum cutting width: 350mm Individual cutting parameters can be customized. The price includes basic tables 2 + 2 m There is also a wide range of extension table configurations to choose from, whether it is digital stops, controlled stops, etc.

Year of construction: 1994, condition: used, functionality: fully functional, Emmegi Norma 350 TU/4 double-head saw with dust extraction system and spare blades for cutting PVC profiles. €1,000 (excluding VAT). No delivery; must be picked up at the workshop. Nlodjza Smnopfx Ab Uog

Condition: used, Year of construction: 2017, For processing aluminum and PVC profiles: * Miter cuts possible in 3 planes, also usable as a crosscut saw. * Manual adjustment of the horizontal saw blade, allowing it to be positioned up to 20 mm in front of the vertical blade. Nlodezrk Rbepfx Ab Uog * Notching options: right-angled, single-sided bevel, double-sided bevel, triple-sided bevel. * Processing of profiles up to 300 mm wide at 90°, sharp miter cuts up to 30°, profile height 280 mm. * Notching depth: horizontal up to 185 mm, vertical up to 210 mm at 90°. * Notching width at 90°: 300 mm. * Max. profile height 280 mm. * Swivel range of the saw blade vertically from 30° - 90° - 30° (front/center/rear) manually, positioning via a mechanical digital display. * Swivel range of the saw blade horizontally with the vertical saw blade 30° - 90° - 30°, manually, positioning via a mechanical digital display. * Material stop (tabletop) can be swivelled manually to the left and right from 30° - 90° - 30°, positioning via a scale. * Material depth stop is manually adjustable with a sliding carriage and hand clamp, positioning via a mechanical digital display.

Condition: new, Circular saw automation system Profilma 502, representative of the diverse "Profilma" series ideal for window and facade construction, automotive industry, machine and plant engineering, photovoltaics/solar, etc. • for aluminum and plastic profiles • fully automatic operation • Siemens S7 control with touch display, including piece counter Nedpezlr Rcefx Ab Ujlg • Error diagnosis including IXON router for VPN connection • Batch multiplier for the use of material bundles • Cycle time indication in seconds • for use with Ø 550 mm saw blades • Drive 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm • motorized saw feed, sawing cut from below • Cutting splitter extension on both sides of the saw blade • Material feed unit with ball screw spindle and servomotor • Feed length: 3 - 800 mm • Feed slide with adjustable support roller • Reversing mechanism up to a section length of max. 4.0 m • Automatic shutdown via limit switches at the end of the material • Remnant piece from 75 mm (depending on the profile) The basic machine is also available as a sawing, drilling, and threading automation system or as a sawing and punching automation system. They complete your orders quickly and efficiently with precision and high production volumes. Further circular saw automation systems are also available for larger profile dimensions or cost-intensive workpiece materials, and are part of the proven Pressta-Eisele standard range. Based on your processing requirements, we will be happy to advise you!

Year of construction: 2000, condition: good (used), Weight: 4600 kg Dimensions LBH: 4350 x 1070 x 2690 mm Saw blade dimensions: 8250 x 54 x 1.6 mm Fright basis: EXW with disassembling Price: on demand The 2000 Kaltenbach KBS 1001 DG band saw is a semi-automatic, high-performance band saw for cutting and drilling profiles. The Kaltenbach band saw has a two-metal saw blade M42 measuring 8250 mm x 54 mm x 1.6 mm. The motor of the saw is frequency controlled and has a driving power of 7.5 kW. The cutting speed is continuously adjustable between 16 - 100 m / min. -Working height is 450 mm, working width 1000mm. -drill diameter:10- 40 mm Nlodshkhumjpfx Ab Usg -material dimension max: 1000mmx450mm -material dimension min:65mmx65mm -3 drilling axes, one vertical and one horizontal -drill feed rate of 20-200mm/min -5 tool changer position per axis with an iso 40 tool holder The machine can transmit data in different ways: 1. The operator is programmed directly on the control panel. 2. The data is entered into the job preparation via computer and then imported as a CSV file. Data transfer takes place via a floppy disk or network. 3. Data are entered using CAD programs. DSTV data is imported via a floppy disk or network.

Condition: good (used), Year of construction: 1998, Cutting length 6000 mm Saw blade diameter 500 mm Mitre cuts swivelled from 22.5° outward to 45° inward Two-hand operation Nlodoyz Il Rspfx Ab Ujg with intermittent spray device

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Miter cut: +/- 45° Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm - Motor type RF 1.5 / 4 / 2-7 - Saw unit for shifting cut, tiltable 45° to the left - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Space requirement (L x W x H): 1050 x 1020 x 1700 mm Weight: 150 kg In good condition Njdpfx Abszinzrj Uslg

Condition: new, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Nljdpfszlivpox Ab Uog Manufacturer: Schneider Electric Series: Masterpact NW Model: NW32HF Schneider reference: 48321 Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Version: Drawout / withdrawable Rated operational voltage: 690 V AC Frequency: 50/60 Hz Rated insulation voltage, Ui: 1000 V Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Rear high-current terminal connections Withdrawable cradle/chassis included Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector

Condition: excellent (used), functionality: fully functional, Schorch electric motor 75 kW - 735 rpm. For direct frame saw drive. With reinforced bearings. Equipped with a 400 mm diameter pulley. Nledpoxvpqbjfx Ab Ujg

Condition: as good as new (ex-display), Year of construction: 2005, ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery SEMI AUTOMATIC DOUBLE MITRE SAW Technical Data Right head displacement by means hand wheel Reading of the cutting dimension on high precision metric scale with micrometric adjustment Sliding of the moving head by means of ricirculating ball bearings on rectified and tempered guides Radial sliding of the sawing group Full protection of the sawblades by means of safety hoods with automatic closing Pneumatic heads tilting at 90°/+ 45°/-45° Possibilty to mount sawblades Ø 500 - 530 - 550 mm 2,2 Kw (3 HP) 3 phase motors - 2800 r.p.m. Nsdpob Rnv Ssfx Ab Uelg Sawblade shaft Ø 30 mm Cutting lenghts 4000/5000/6000 mm Working pressure 7 bar Overall dimensions 524-624-724x139x155 cm Weight 1200 - 1350 - 1500 Kg Standard Equipment Horizontal pneumatic clamps Automatic lubrication by means of nebulizer Air filter Air gun Service spanners Optionals Reading of the cutting dimension on digital display Turning vertical clamps kit Pneumatic central support Manual central support Right head in feed roller conveyor Semi-automatic reduced cut modification c/w in feed roller conveyor Vee notch device for PVC profiles Micro-spray nebulising device Pneumatic support for long bars cover customer Startup type negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: used, Year of construction: 2009, Circular saw KASTOflex F in good condition, documentation included. Can be tested in Kaunas. Specification Model: Kastoflex F Year: 2009 Weight: 2700 kg Power: 13 kW Dimensions: length 4800 x height 2225 x width 2580 Automatic feeding, dumping Nledpjwfd Icefx Ab Ueg Sawn conveyor Corner cutting Pressure CNC controller Cutting at an angle of 90 (round, square, flat) 150 / 140 x 140 / 200 x 100 mm Cutting at an angle of 45 (round, square, flat) 145 / 120 x 120 / 160 x 80 mm Cutting at an angle of 60 (round, square, flat) 115 / 100 x 100 / 120 x 60 Disc diameter (Ø 350 mm opt.) Ø 400 to 450 mm If If you have more questions, we will be happy to answer them.

Condition: excellent (used), I sell a massive band saw for cutting metal in bdb condition. Njdpfx Aeu Udrieb Uslg

Condition: used, Year of construction: 2018, Panel dividing saw Manufacturer: Homag Type: Profi HPP300/43/43 Year of manufacture: 2018 Technical data Cutting length: 4,300 mm Cutting width (programmable sliding table): approx. 4,250 mm Max. feed rate of the saw carriage: 130 m/min Optional saw carriage feed rate up to 150 m/min Saw blade projection: 80 mm (optional 95 mm) Max. saw blade diameter: 350 mm Main saw motor: 11 kW Nljdozuy N Sspfx Ab Ujg Scoring saw, motor-adjustable Clamping jaws: 7 pieces (2-finger design) Control system: CADMATIC 4.1 / 4.5 or powerTouch Total connected load: approx. 18.4 kW Compressed air: 6 bar CE marking Package thickness up to approx. 80 mm (standard) Max. saw blade: 350 mm Main saw blade: 350-380 mm, depending on configuration Scoring saw motor: 1.5-2.2 kW Extraction capacity: approx. 3,350-5,230 m³/h Processing: Single sheets and package cuts Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2024, condition: new, functionality: fully functional, Electric vaporizer Nlsdjx H R Ryopfx Ab Ueg Capable of vaporizing liquefied gas at any temperature. We utilize these units to vaporize liquid CO2 and store it in concrete. It can also be used for other applications, such as vaporizing nitrogen, oxygen, or other gases for use in end processes. New price 140,000 CHF.

Condition: used, Year of construction: 2008, functionality: fully functional, manual in images. This is a 5 head horizontal Band Saw. It has tilting heads making it ideal for Feather Edge board production. It has 18KW motors. This machine comes with its own saw sharpening equipment and 10 new blades. All power feed wheels have been replaced with new. It runs on 30mm blades. Nlsdpfx Ajzwh Rcsb Uog All new power feed sprockets and fully DC braked.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 242724, Automatic miter cutting Overlength cutting Saw blades 500mm etc. Nlodpfxezqu Ego Ab Usg

Condition: as good as new (ex-display), functionality: fully functional, Panel saw ALTENDORF HAND GUARD latest software 7/26 TwinFlex edition with 12" touchscreen, double sliding table, adjustable on both sides, manual parallel fence adjustment, parallel fence with fine adjustment, control panel at eye level, adjustable, dimension input via touchscreen, F 45 ElmoDrive control system, electric height adjustment, electric tilt adjustment, AKE tool clamping system, automatic correction of cutting height, when the saw unit is tilted, easy axis calibration, machine diagnostics, operating hour counter, USB interface, dust-proof ----- Technical data ----- Swivel range: 0 - 46 °, Cutting length: 3,000 mm, Cutting width: 1,000 mm, max. saw blade diameter: 450 mm, max. saw blade overhang: 150 mm, angle stop with fixed position: 90 °, manually adjustable via measuring scale: 3,200 mm, speeds: 3,000 / 4,000 / 5,000 rpm, motor power 400 V: 7.5 hp / 5.5 kW, screen size: 12 ", machine height: 91 cm Optical protection system: Two cameras collect data for hand recognition from a wide area around the saw blade. As soon as hands are detected in that area, the saw unit is quickly lowered and quickly stopped within a quarter of a second. Nlsdpfx Aozgwl Ijb Usg EDITION TWINFLEX - Double sliding table 3,000 mm - Saw blade overhang 150 mm - Motor power VARIO 5 kW (6.8 hp) - Adjustable on both sides - Angle miter stop DIGIT LD, cutting length up to 3,200 mm - CNC parallel fence, cutting width 1,000 mm - On/off switch on the double sliding table - Template holder - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for adjustment on both sides - Scoring unit 2-axis, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable - Quick lowering and quick lifting, - Drive motor 0.75 kW (1 hp), 8,200 rpm. - Scoring system RAPIDO 180 mm ALTENDORF for adjustment on both sides - LED lighting on the scoring unit ALTENDORF - Double sliding table 3,400 mm, ALTENDORF - CNC parallel fence, 1,300 mm, ALTENDORF - Camera arm, can be swivelled out of the way ALTENDORF - Front support roller ALTENDORF Width 300 mm - Air cushion table ALTENDORF - Table extension 840 mm ALTENDORF with air cushion - HandGuard 2025 new version The machine is sold with a new warranty of 1 year. The machine can be purchased at an absolute special price. We would be happy to make you an offer.

Condition: used, Year of construction: 2015, Travel range: X 600 mm Y 400 mm Nlsdpfsz D Egrsx Ab Uog Z 400 mm Including coolant system Water bath machine