End cutting saw fully electrical

KUSING SPS-500

Condition: new, Year of construction: 2026, I am selling this long-cut (shortening) saw. Suitable for cutting boards, prisms or large prisms. Cgedsx Ut Iqjpfx Agkop Cutting length: 600 / 900 / 1200 mm Cutting height: 100 / 150 / 200mm Motor power: 7.5 / 11 / 15kW Disc diameter: 500 / 600 mm Disc feed mechanical using an electric motor. Individual parameters can be customized. Tables according to specification.

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Cgodpfxow Sy T He Agkop

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. How does it work? The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Thickness min / max: 75 mm - 100 mm Specifications Operators | 0 Cgedpfxewdutmo Agkep Length | 7,5 m Width | 2,5 m Height | 1,8 m Power | 7 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 450 L/min Should be filled and controlled | Lubrication points Machine capacity | 36 blocks/min Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Year of construction: 1984, condition: excellent (used), Blade diameter: 550 mm Minimum cutting length: 500mm Minimum cutting width: 100mm Maximum cutting height: 160 mm Cgjdslrtntspfx Agkjp Minimum cutting height: 40mm Pneumatic clamps

Condition: used, Year of construction: 2014, Stromab CT600 Automatic Upstroke Crosscut Saw for Straight and Angled Cutting - 2014 CE 6000mm infeed capacity 2000mm Outfeed table 12" Touch screen graphic display Power 1000 controller Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. Cgsdpfx Aswl Hyusgkop 5 optimising criteria - longest size, minimum waste, priority size, by volume or by value. Cutting list entered via controller key pad Graphic description of the workpiece. 10hp motor Rack & pinion drive system for pusher with magnetic reading strip to give a high level of  repeat cutting accuracy 600mm diameter blade CUTTING CAPACITY POSITION A) # max height At 0°: mm. 200x215 or 50x370 At 30°: mm. 200x185 or 50x325 At 45°: mm. 200x150 or 50x265 CUTTING CAPACITY POSITION B) # max. width At 0°: mm. 160x315 or 40x410 At 30°: mm. 160x270 or 40x350 At 45°: mm. 160x220 or 40x285 Angle setting -70 degrees, 0 degrees, + 70 degrees Adjustable saw stroke speed Vertical clamping Horizontal clamping Dust extraction 1 off 100mm, 1 off 120mm. Plexiglass hood with gas springs Year - 2014 CE

Condition: used, Year of construction: 2004, cutting width max. 700 mm Csdpfx Agox Eblvekogp Cutting height max. 120 mm saw-blade dia. max. 700 mm

Condition: new, Semi-automated nailing machine for pallet legs. How does it work? The magazines are manually fed with blocks and boards where after the machine automatically nails the parts together. The machine is equipped with three channels for blocks and a magazine for boards. Easily adjustable It’s easy to produce various types of pallet legs with OM-1000. The machine has three channels for inserting blocks. The cassettes in the channels are changed in order to fit the size of the blocks. The cassettes are easy and fast to readjust. Mychrome has various additional machinery that can easily be docked on to existing machines in order to build a longer line where more stages can be automated. The possibility to modify the design and the size of the pallets is still available with the additional machinery. Asssembled leg size: Min / max length: 600 mm - 1 600 mm Width min / max: 16 mm - 150 mm Leg boards: Min / max length: 600 mm - 1 600 mm Width min / max: 75 mm - 150 mm Thickness: 16mm - 28mm Blocks: Material: Solid wood or pressed blocks Dimension: 70 -100mm Width: 75 -150mm Specifications Operators | 1 Length 2,0 m Width 2,5 m excluding platform ladder Height 3,6 m Power Electric: 6 kW, 3x400 V+N, Hydraulic: 15 kW, 3x400 V+N Pneumatic system 7 bar compressed dried air: 300 L/min Cgodjwdutajpfx Agksp Should be filled and controlled Container for lubricating oil Machine capacity 12 legs/min Standard equipment 3 channels with motorized adjustment 3 cassettes, manually adjustable for block sizes 1 cassette, manually adjustable for board length Operators terminal for production control Program for saving nail positioning Nailing system Electric or hydraulic beam nailing 1 nail box (9 nails) 9 nailing hammerheads Individual nail picking nail indication system Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: new, Year of construction: 2025, Professional machine for removing defects from wood and wooden elements. It optimizes the cutting process and ensures minimal material losses. The CROSS CUT 306 optimizer is a new technology of wood machines, produced by the leading brand on the Polish market, which is CNC Technologies. The machine provides fast, simple and precise cuts to size, increasing production efficiency. The optimizer performs cross-cutting of the material into sections of a specified length, eliminating material defects marked with a fluorescent pencil and using a sensor to analyze the position of the pencil. It is worth noting that the machine can measure and cut in an automatic cycle. Model: TechnologieCNC CROSS CUT 306-4M Effective machining length - 4000 mm (optionally 6 m) Cgedetvmv Rjpfx Agkjp Effective machining width - 30-230 mm Effective machining thickness - 40-80 mm Effective machining in cross-section - 250x30mm Scanning speed - 80m/min Scanning device - Infrared sensor of the German brand SICK Scanning/detection of defects - Fluorescent sensor of the German brand SICK Table height - 800mm Feed speed - 60m/min Pusher servo drive - AC DELTA 750w Saw lift servo drive - AC DELTA 1kW Cutting saw motor - 7.5kW, 3Ph, 2930 rpm. Saw blade diameter - fi 500 mm Extraction port diameter - 100mm x2 Total power: +-10kW Overall dimensions - 6750 x 1450 x 1800mm Transport dimensions: 535 x 80 x 110 - table, 200 x 100 x 160 - console Weight: 1436 kg

Condition: good (used), Year of construction: 2011, operating hours: 1,152 h, Vehicle description Roller DYNAPAC CC 800 year 2009 acc. counter 1.152 hours 17.3 KW Cgedouyllkepfx Agksp 1,580 KG - ready for immediate use - original paint! Selling price: 7.950,-- net Cheap delivery also possible!

Condition: excellent (used), Cross cutting line Cutting blade diameter 400 mm Codoyf Dy Djpfx Agkjgp Electronic pusher