Used Hydraulic Three-Roll Plate Bending Machine for sale (84,703)

Condition: excellent (used), Technical Details: Working width: 3100 mm Maximum bending capacity: 16.0 mm Hfjdoxyvx Tjpfx Akren Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Hydraulic drop end bearing Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Net weight: approx. 8.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. Hfjdpfx Akoz Ix Ukeron It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 21977-1964, Offer 26165 Technical Data - Two driven rollers, each hydraulically adjustable - For edging and conical rolling - Operation via a separate control panel, with digital actual value display - and manual operation - Max. working width 1300 mm - Max. sheet thickness at 400 N/mm² without edging - at bending diameter 370 mm, inside 30 mm - with edging at bending diameter 370 mm, inside 25 mm - without edging at bending diameter 380 mm, inside and - width of 370 mm 45 mm - Upper roller diameter each 300 mm - Side roller diameter each 310 mm - Working speed 4.5 m/min - Drive 400 V / 30 kW - Space requirement W 5800 x H 1900 x D 2200 mm - Weight 8500 kg Hedpfxszf Hkds Akrjfn

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Hjdpjyzc Iajfx Akrjfn Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hodpfowkaalex Akrsfn Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Hjdpfxezbcwmo Akrofn Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm Hedpfxswk Rlxs Akrjfn height: 100cm width: 65cm weight: 240kg

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm Hedpfeza D U Dox Akrofn CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2007, Technical data: Working length: 2550 mm Max. bending capacity for small diameters: 12.0 mm Bending capacity from diameter 900 mm: 18 mm Bending allowance: 10 / 12.0 mm Roller diameter: 310 mm Hydraulic folding bearing Drive power: 11 kW Lateral bending support Sheet metal holding device Digital display Dimensions (length x width x height): approx. 4200 x 1500 x 1650 mm Weight: approx. 10 tons Condition: Hodpfxoztckis Akrofn Overall in very good condition, used only sparingly. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Hfedjx Ii Hvspfx Akron Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1989, sheet width 2050 mm plate thickness 8.0 mm pre-bending capacity 6.0 mm upper roll diameter 190 mm lower roll diameter 180 mm bending speed 5.2 m/min Hfedpsz Dkzhsfx Akron work height max. ca. 980 mm total power requirement 5.5 kW weight of the machine ca. 3500 kg. range L-W-H 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears * for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device * Inclination of the side rollers by handwheels * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - free-moving operation * electric delivery rollers * electric turning/rolling movement * digital position display of the reels - hardened rollers SAE 1050 CK 45 - Hydraulic folding store for removing closed pipes - safety device (cable) - Original instruction manual + CE declaration * Machine link : ?machineno=1008-9401255

Condition: good (used), functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Hfodsww I Tmspfx Akron

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Hsdpfoyttv Rox Akrjfn

Condition: excellent (used), Year of construction: 2021, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20.0 mm voltage 400 V total power requirement 1.1 + 2.2 kW weight of the machine ca. 2370 kg range L-W-H 3300 x 1150 x 1110 mm Rarely used, according to the previous owner Hfedpfx Aez St Rvokren Current new price approx. 25.000 euros Special price upon request (!) Features: - Electro-hydraulic 4-roll plate bending machine * ??Equipped with a driven top roll and bottom roll * Sturdy welded construction - Application range: * Light to heavy-duty sheet metal processing (steel/aluminum/stainless steel) - Electro-hydraulic adjustment of the bottom and side rolls - Linear guidance for the side rolls - Top roll driven by a robust electric motor and planetary gearbox - Mobile, separate control console - Hardened, crowned rolls (SAE 1050 / CK 45 steel) - Conical bending device - 3-axis digital display for precise roll positioning - Electro-hydraulic drop-end (swing-out bearing) - Operating manual (PDF)

Condition: used, functionality: fully functional, Year of construction: 2009, machine/vehicle number: 4ROLL DUAL PREPINCH, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 430 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 35 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness brass (max.): 50 mm, overall weight: 35,000 kg, total length: 6,100 mm, total width: 2,225 mm, total height: 2,700 mm, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 7, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, PLATE BENDING MACHINE 4 ROLL HYDRAULIC 3000 X 40 MM brand OMCCA YEAR 2009 DOUBLE INITIAL PINCH Machine used in working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 30 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 430 mm One extra smaller upper roll D=350mm fast interchangeable • Hardening of the rolls high strength surface • All 4 rolls driven hydraulic powered rollers rotation • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening of top roll hydraulic drop-end to unload the plate being formed Hfjdpfx Asz Rw R Dskrjn • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and digital readout 3 axis. • Digital readouts of the rolls position and top support • Power electric 50 Hp voltage 3-phase 400 /50 • Dimension 6100 x2225 x H 2700 mm - weight 35000kgs Additional tooling with the machine Top central support motorized to hold in place the formed plate up to diameter 3500 mm Side support hydraulic dual articulation

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks Hfodpoz N Hxhefx Akrsn * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: like new (used), Year of construction: 2021, Hydraulic 4-roll bending machine Digital display of roll positions Capability to form cones Length: 3050 mm Diameter of upper rolls: 220 mm Diameter of side rolls: 180 mm Hedpfoz I D Agox Akrefn Bending capacity: 7 to 8 mm with a minimum radius of 1000 mm Machine dimensions: 4700 x 1100 x 1330 mm Weight: 5700 kg Operating videos available upon request.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Smart Line, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 180 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, power: 11 kW (14.96 HP), input voltage: 400 V, number of digital displays: 1, warranty duration: 12 months, Equipment: documentation/manual, emergency stop, DIGIMA W12-8x3200 Hydraulic Four-Roll CNC Plate Rolling Machine The DIGIMA W12-8x3200 is a hydraulic four-roll CNC plate rolling machine designed for accurate, repeatable and efficient sheet-metal forming. With a working width of 3200 mm, it is suitable for producing large cylindrical parts, sleeves, pipes, curved sections, housings, tanks and other technical components used in metalworking, steel construction, ventilation, machinery manufacturing and industrial production. The four-roll system provides a major advantage over conventional three-roll machines. The sheet is held securely between the upper and lower rolls, while the two side rolls perform the pre-bending and rolling operations. This arrangement allows both edges of the sheet to be pre-bent without removing and turning the workpiece, reducing handling time and limiting the length of straight sections left at the ends. The result is improved repeatability, higher productivity and more consistent part geometry. Hjdpfjznw T Usx Akrsfn The W12-8x3200 can roll sheet metal up to 8 mm thick and perform pre-bending up to 6 mm. Its 3200 mm working length enables the processing of wide sheets for both one-off jobs and series production. The upper roll has a diameter of 210 mm, the lower roll 190 mm, and the side rolls 180 mm. The minimum rolling diameter is 400 mm, allowing the machine to produce a wide range of cylindrical and curved components. The hydraulic drive ensures smooth, stable movement and reliable clamping force throughout the forming process. The 11 kW motor provides the power required for regular industrial operation, while the rolling speed of 4 m/min supports efficient production without compromising process control. The rigid machine body and carefully arranged roll system help guide the material accurately and reduce unwanted deformation. Computerised CNC control makes the machine convenient to set up and operate. The operator can control roll movements, monitor the forming process and reproduce previously established settings for recurring jobs. This is especially useful in batch production, where the same diameter, radius and dimensions must be achieved repeatedly. The control panel also helps reduce setup time and simplifies everyday machine operation. The operating sequence is straightforward. First, the sheet is inserted and stabilised between the rolls. The side rolls then pre-bend the sheet edges, minimising flat ends. Finally, the material is passed through the roll system until the required tube, sleeve, arc or cylindrical shape is obtained. The machine can also be used for forming conical components by applying a controlled inclination of the rolls. Thanks to its wide working capacity and computer-controlled operation, the machine can be used in flexible workshop production as well as organised manufacturing processes. It is suitable for companies producing ventilation ducts, structural elements, machine covers, tanks, steel sleeves and custom-made components. Repeatable CNC settings are particularly valuable when several identical parts must be formed with the same diameter and curvature.

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 220692, Equipment: emergency stop, sheet width 1550 mm Hjdpfszxt Txox Akrjfn plate thickness 6 mm diameter of upper rolls 228 mm drive elektronisch zwei angetri

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll Hfodpsz Dxpmsfx Akren without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, actuation type: electric, roller diameter: 90 mm, working width: 1,270 mm, sheet thickness (max.): 3 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), input voltage: 400 V, rotational speed (max.): 6 rpm, type of input current: three-phase, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, sheet metal roll bending machine BOLUK BM 1270 x 90 - 2.5 mm NEW! for sale. manufacturer: BOLUK 1270X90mm year of manufacture: 2024 Bending Length: 1270 mm Bending capacity: 2.5 mm Roller diameter 90 mm - SAE 1050 certified high tensile steel rollers - Wire grooves at the ends of the rollers (4/6/9) mm - Manually adjustable rear roller - Mobile control panel with foot pedal - Precision bending with brake motor - Conical bending device - Manually foldable end - Cast iron main frames Bending speed 6m / min Motor power 1.1 kW 50Hz 380v Wire groove diameter 4/7/10 mm Hsdexhub Aopfx Akrofn Machine dimensions 1850x700x1200 mm Weight 520 kg

Condition: excellent (used), Year of construction: 2006, Technical specifications: Working width: 2100 mm Bending capacity: 28.0 mm Springback: 22.0 mm CNC control Diameter of upper roller: 350 mm Diameter of middle roller: 330 mm Diameter of side rollers: 240 mm Hardened rollers Conical bending unit by inclining the two side rollers Hfsdpjx Dtt Aofx Akron Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (length x width x height): approx. 3600 x 1500 x 1500 mm Weight: approx. 14.5 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 90 mm, working width: 1,550 mm, roller height adjustment: 110 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, overall weight: 600 kg, total length: 2,300 mm, total width: 700 mm, total height: 1,150 mm, power: 1.1 kW (1.50 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, AKYAPAK AS 1550x90 sheet metal bending machine 1550mm x 2.5 mm, 3 rollers /ct2289/ Electric, pedal-operated rolling machine. Strong, robust construction. The upper roller can be rotated to remove the workpiece Convenient to use, suitable for workshops and industry Manufacturer: AKYAPAK AS 1550X90mm Year of manufacture: 2002 Bending Length: 1550 mm Bending capacity: 2.5 mm Roller diameter 90 mm - SAE 1050 certified high tensile steel rollers - Wire grooves at the ends of the rollers (4/6/9) mm - Motorized adjustable rear roller - Mobile control panel with foot pedal - Precision bending with brake motor - Conical bending device Hfjdpfxoxmvgkj Akrsn - Manual folding end - Cast iron main frames Bending speed 6m / min Motor power 1.1 kW 50Hz 380v Wire groove diameter 4/7/10 mm Machine dimensions 2400x800x1200 mm Weight 600 kg

Condition: new, sheet width 1570 mm Hedevkixxspfx Akrofn plate thickness 10 mm pre-bending 8 total power requirement 7 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,5 x 1,5 x 1,55 m

Condition: new, sheet width 2070 mm plate thickness 10 mm pre-bending 8 mm total power requirement 7 kW Hodpfevn U H Aex Akrofn weight of the machine ca. 5 t dimensions of the machine ca. 4050 x 1470 x 1550 mm