Used Hydraulische Kolbenmembranpumpe 50M3/H, for sale (56,258)

Condition: new, Hydraulic piston diaphragm pump, used Type: REWA/Abel HMD-G-50-0500 Construction: long Nedpfx Abeib A Dws Ujlg Flow rate: max. 50 m³/h Delivery pressure: 15 bar Motor: 30 KW, 400 V, 50 Hz, 1500 rpm,

Condition: good (used), functionality: fully functional, Hydraulische Pressen und Maschinenbau GmbH Hydraulic press, 70 9251 3, HES 16MP Model: 7092513 Type: HES16MP General: Nlodpfx Aoumk Naob Usg Display: 0-400kp/cm2 / 0-25Mp

Condition: used, Schulz hydraulic portal press type H26 buy used Machine data: max. pressure 1500 kN (150 tons) Main motor 55kW Cooling system motor 3kW Rexroth hydraulic system Tool plate dimensions 850x760 mm Nlodjvxtrxepfx Ab Usg

Condition: used, tank capacity: 50,000 l, total width: 3,600 mm, total height: 8,700 mm, Insulated 50m³ stainless steel tank with heating jacket and agitator Diameter: 3.60m Height: 7.20m + 1.50m agitator = total height 8.70m The tank is insulated and lined with steel sheet. Nlsdpfxjzwm Nko Ab Uog The heating strip is located in the lower half of the tank. The tank has a flat bottom. Gear motor power: 10 kW/15 kW. Mixing speed: approx. 20 rpm.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz Njdpfx Aszy Ndceb Uelg EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3075419, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, swing diameter over cross slide: 635 mm, turning diameter over bed slide: 1,016 mm, For sale is a HAAS SL-40HE CNC turning center, manufactured in 2006, in a High-Center configuration with a full C-axis and driven tools. This robust CNC turning machine is suitable for demanding turning and milling operations. TECHNICAL DETAILS Travel in X-axis: 432 mm Travel in Z-axis: 1,118 mm Spindle speed max.: 2,400 rpm Swinging diameter over bed: 1,016 mm Swinging diameter over cross slide: 635 mm Bar capacity max.: 101.6 mm C-axis: full C-axis Spindle power: 29.8 kW / 40 hp Spindle nose: A2-8 Spindle bore: approx. 116.8 mm Gearbox: 2-speed Turret capacity: 10 stations Driven tools: yes MACHINE DETAILS Nsdpfx Abszy Npfs Uslg Dimensions & Weight Dimensions (L x W x H): approx. 5,500 x 2,300 x 2,300 mm Machine weight approx.: 11,000 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Nlsdpfszgq Szsx Ab Ueg Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: new, Year of construction: 2026, Heavy-duty hydraulic guillotine shear for universal use for trade and industry. With the hydraulic table shear GLT from Prod-Masz you can make the perfect cut with every job. - The extending table makes it easier to carry large-sized metal sheets on the table - Support table with graduation - robust and compact steel construction - high quality, durable steel knives Nsdpfx Aec I T E Tob Uelg - extremely stable and heavy cast iron construction - Ground and hardened guillotine shear knives - Back gauge system with Scala - CE approved quality - Declaration of conformity - for steel plates up to 1.2mm - Open design suitable for endless cuts - Max. Working width: 3000 mm - Motor power 2.2 kW - HL 46 oil - pressure force 4t - Operating pressure 120-150 bar - has hydraulic compensators from the cutter bar upwards Dimensions: Length: 3500 mm Width: 750 mm Height: 1150 mm Weight about 1000 kg We are looking forward to your contact! We issue the invoices with 0% (intra-Community delivery)

Condition: new, Year of construction: 2025, Schnittbereich rund: 420 mm Schnittbereich quadratisch (B x H): 420 x 420 mm kleinste zu schneidende Größe: 10 x 10 mm Einspannbereich: 0 - 420 mm Bündelschnittbereich (Min.B x H - Max. B x H ): 160 x 130 - 260 x 160 mm Nlsdowqchxjpfx Ab Ueg Kürzeste Länge des abgeschnittenen Stücks : 5 mm Kürzeste Reststücklänge im automatischen Betrieb*: 190 mm Kürzeste Reststücklänge im Einzelschnitt: 20 mm Length: 2220 mm Breite inkl. Späneförderer : 3050 mm Height: 2100 mm Höhe der Materialauflage: 860 mm Weight of machine approx.: 2850 kg Electrical connected load: 9,5 kW Leistung des Sägemotors: 7,5 kW Leistung hydraulischer Motor: 1,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20 - 80 m / min Vorschubgeschwindigkeit der Säge: 1 - 300 mm / min Automatische Materialvorschublänge, Einzelhub: 500 mm Länge des automatischen Materialvorschubs, Mehrfachhub: 9999 mm Abmessungen des Sägeblatts: 5150 x 41 x 1.3mm mm

Condition: ready for operation (used), Year of construction: 2017, Print width up to 320 cm Resolution 800 × 600 dpi Nodpfxozzp Hto Ab Ujlg Throughput: up to 310 m²/h 4 colors (CMYK) The machine is in good technical condition and currently in daily production use.

Condition: used, maximum load weight: 25,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2019, loading space length: 1,335 mm, loading space width: 2,350 mm, loading space height: 1,500 mm, loading space volume: 50 m³, * Reisch RHKS-3-SG13 steel tipping body 50 m3 * First registered 2019 * Lift axle * Alloy wheels * Air suspension * SAF axles * Roll-up tarpaulin * Recessed lashing rings * Unladen weight: 9,800 kg * Gross weight: 35,000 kg * Payload: 25,200 kg * Internal dimensions: 13.35 x 2.35 x 1.50 m Nodpjyylrfjfx Ab Uslg

Condition: used, Applicable material: Concrete POLYGONMACH PMC150 150m3 mobile concrete batching plant is a mobile concrete batching plant used to produce large quantities of concrete in large construction projects. These power plants are portable and rebuildable, can work with a wide range of materials and can be used for many construction projects due to their mobility. The following steps are recommended to use the POLYGONMACH 150m3 mobile concrete batching plant effectively: 1. Correct positioning: The switchboard should be installed at the easiest access point possible. It must be securely located and engineers must ensure primary resources are in place. 2. Personnel: Plant operators must be experienced and trained to ensure the best results in construction projects. Employees should be trained regularly and use appropriate protective equipment to work inside the plant. 3. Maintenance: Regular maintenance ensures longer life and efficient operation of the plant. This can reduce disruptions and prevent irregularities in mobile switchboard operations. 4. Production: In addition to their productivity, 150m3 mobile concrete batching plants have technologies that enable the production of high quality concrete. Therefore, it is important to use the right concrete mix to ensure efficient production every time. 5. Storage: The produced concrete should be stored correctly and well protected until the time of use. Ideal storage conditions will ensure safe handling and trouble-free use of concrete. Mobility: mobile Capacity: 150 m³/h Nljdpfsx D A Icex Ab Ujg

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors Nljdpfx Absz Df Txj Ujg - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: new, functionality: fully functional, Year of construction: 2024, This powerful, hydraulic pile rammer from Maruzen is a good choice if you are looking for a strong machine for striking steel and wooden piles. The Maruzen KH193 comes standard without impact piece. Easy and fast to use As many as 1920 blows per minute Operates on hydraulic power source such as a power pack or earth mover Can be used in wet conditions, even underwater Minimal service required; lubricate head every 50 hours and service every 500 hours. Hydraulic powerhouse The KH193 pile rammer is a perfect choice when ramming steel pipes, for example 60 x 40 mm or ø 60 mm, but it is also suitable for wooden piles up to a diameter of 110 mm. It weighs 20 kg and is more powerful than our gasoline rammers. This type of pole rammer offers many possibilities: Maruzen's hydraulic powerpack is intended for mobile purposes and is known for its easy way to use. This powerpack UH070 is matched with the AY01H horizontal auger, the OH01 hydraulic one-man auger and the KH193 pile rammer from Maruzen. This type of powerpack offers many possibilities in: Assembly Fencing Foundation work Guardrail/boarding work Installing solar parks This hydraulic power pack is powered by a Honda GX200 gasoline engine and is delivered fully assembled, on a metal frame with large wheels. Benefits: Low fuel consumption; 1.6 Liters per hour at full power 20-25 Liters per minute Low noise level Light weight (40 Kg) Honda GX200 4 stroke engine (low emission) Very easy to use. EuroGate International offers affordable quality and service Nlsdpfx Ajrtqydjb Usg Maruzen is a reliable machine builder from Japan, for all kinds of hydraulic tools. The top brand offers excellent quality and service. Maruzen has been producing hydraulic machines since 1954.

Condition: used, Year of construction: 2007, machine/vehicle number: 4801250 / PH06 11 005, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, overall weight: 55,000 kg, year of last overhaul: 2024, clamping force: 3,000 kN, mold height (min.): 1,000 mm, plate length: 2,800 mm, plate width: 2,200 mm, Equipment: CE marking, documentation/manual, For sale is a KraussMaffei LFI shuttle mould carrier for polyurethane processing and backfoaming of large-format components. The system was designed for PU moulding and LFI applications and features a hydraulic clamping unit with a movable lower mould mounting platen. Nledpfez Dn Ixox Ab Ujg Technical data: Manufacturer: KraussMaffei Type: FT-R-H-25-20-3600.0°.65° Year of manufacture: 2007 KM order number: 39000233 Control system: Siemens S7 Clamping force: 3,000 kN Opening force: 800 kN Parallel stroke: 600 mm Mould mounting platens: 2,500 x 2,000 mm Minimum mould height: 1,000 mm Maximum mould height: 1,500 mm Maximum total mould weight: 10,000 kg Maximum upper mould weight: 5,000 kg Upper mould mounting platen pivotable up to 90° Machine weight: approx. 55,000 kg Operating voltage: 400 V Scope of supply: LFI shuttle mould carrier Hydraulic units Control unit Shuttle / traversing unit Production moulds and temperature control units are not included in the scope of supply. Extensive original KraussMaffei documentation is available, including operating manuals, technical drawings, electrical diagrams and spare parts documentation. The machine is fully functional. Inspection under power is possible by prior appointment. The machine is located in the Hamburg area, Northern Germany. The exact location will be provided to qualified prospective buyers. Dismantling, loading and transport are to be carried out by the buyer. Further technical documentation, drawings and photographs are available upon request. Subject to availability.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, overall weight: 6,500 kg, Clamping force: 150 t Year of manufacture: 2012 Injection shot weight: 359 g Injection unit 800 Screw diameter: 50 mm Specific injection pressure: 2000 bar Injection volume: 392 cm³ Injection shot weight: 359 g Screw L/D ratio: 24 Tool closing unit 1500 Nsdpfjz D U Tnsx Ab Uolg Clamping force: 150 t Tool plate dimensions: 695 x 695 mm Distance between columns: 520 x 520 mm Tool height: 250...650 mm Opening stroke: 400 mm Maximum plate distance: 650...1050 mm Weight: 6500 kg Dimensions (m) L x W x H: 5.25 x 1.67 x 2.20 m Control system: Selogica Equipment: Hydraulic core 12-zone hot runner system Accumulator Frequency converter Hidrive drive 4 x pneumatic valve

Condition: new, Year of construction: 2023, Item: A-10196-SS-horizontaltank-50m3 Capacity 50.000 L Exterior dimensions: L 8817 mm H 3200 mm Ø 2800 mm. Nodpfjq Daf Eox Ab Ujlg Horisontal stainless steel tank AISI 304. Newer used - NEW!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X393X00765, Year of construction: 2020, operating hours: 9,763 h, load capacity: 3,000 kg, lifting height: 4,350 mm, fuel type: gas, mast type: simplex, construction height: 2,914 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,350 mm ISO class: 3 Load capacity range, ISO class 3: 2,500–4,999 kg MACHINE DETAILS Mast type: Simplex Njdpfx Aoz Dw Uzeb Ujlg Fuel type: Gas Overall height: 2,914 mm EQUIPMENT 3rd valve 4th valve Heater Full cabin Air conditioning

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones Nlsdpfjzbr U Uox Ab Usg -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: K787016, overall weight: 41,000 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 800 A, operating pressure: 40 bar, control voltage: 24 V, type of input current: three-phase, Equipment: documentation/manual, Krones Contiform S20 PET stretch blow molding machine – 20 cavities, output up to 40,000 units per hour. Used Krones Contiform S20 machine for manufacturing PET bottles. The machine is completely disassembled and prepared for loading onto a truck. Due to its disassembled condition, it is not possible to perform a test run or functional tests – it is sold as a complete set of components for reassembly by the buyer. Technical specifications: • Manufacturer: Krones • Model / Year: Contiform S20 / [2003] • Number of cavities: 20 • Nominal output (according to the manufacturer's specifications): up to 40,000 bottles/hour • Maximum container volume: up to 3 l (depending on the shape) Njdpfx Aez Euubob Uslg • Oven: linear, with a 40 mm stroke • Neck size: 26/22 (PCO 1881) Scope of supply: [preform feeder, hopper/elevator and orienting device, chiller, molds, spare parts, etc.] Inspection possible by prior arrangement – the machine can be inspected in its disassembled state, with the components laid out in Kutno. Loading at the buyer's expense. Transport to be agreed. Price on request.

Condition: used, maximum load weight: 25,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2019, loading space length: 1,335 mm, loading space width: 2,350 mm, loading space height: 1,500 mm, loading space volume: 50 m³, * Reisch RHKS-3-SG13 steel tipper body 50 m3 * First registration 2019 Nlodpezaznnjfx Ab Ueg * Lifting axle * Alloy wheels * Air suspension * SAF axles * Recessed lashing eyes * Unladen weight: 9,800 kg * Gross weight: 35,000 kg * Payload: 25,200 kg * Internal dimensions: 13.35 x 2.35 x 1.50 m

Condition: used, functionality: fully functional, machine/vehicle number: 1941, empty load weight: 7,480 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2011, next inspection (TÜV): 10/2024, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,770 mm, loading space volume: 93 m³, suspension: air, tire size: 385/65/22.5, color: silver, Year of construction: 2011, Equipment: ABS, H & W moving floor , Cargo Floor floor , Lift axle , Roller tarpaulin , Platform , Folding rear light protection , Moving wall with service door , German trailer Sale only to traders and under exclusion of any warranty . We deliver to any GERMAN seaport . Nodjq T Iuyjpfx Ab Uelg

Condition: new, Year of construction: 2025, Schnittbereich rund: 320 mm Schnittbereich quadratisch (B x H): 320 x 320 mm kleinste zu schneidende Größe: 10 x 10 mm Einspannbereich: 0 - 320 mm Bündelschnittbereich (Min.B x H - Max. B x H ): 160 x 100 - 260 x 130 mm Kürzeste Länge des abgeschnittenen Stücks : 5 mm Kürzeste Reststücklänge im automatischen Betrieb*: 130 mm Kürzeste Reststücklänge im Einzelschnitt: 20 mm Length: 2320 mm Breite inkl. Späneförderer : 2600 mm Nodpfowaa A Eox Ab Uslg Height: 1750 mm Höhe der Materialauflage: 750 mm Weight of machine approx.: 1800 kg Electrical connected load: 6,2 kW Leistung des Sägemotors: 5 kW Leistung hydraulischer Motor: 0,75 kW Schnittgeschwindigkeit stufenlos regelbar: 20 - 80 m / min Vorschubgeschwindigkeit der Säge: 1 - 300 mm / min Automatische Materialvorschublänge, Einzelhub: 500 mm Länge des automatischen Materialvorschubs, Mehrfachhub: 9999 mm Abmessungen des Sägeblatts: 4115 x 34 x 1,1 mm

Condition: excellent (used), Year of construction: 2017, CNC cylindrical / roll grinding machine KRAFT / Praise TT60-40L-C2-H, used – Ø 600 x 4,000 mm, Siemens Nledpfoz Ebl Tsx Ab Ujg Traveling-table CNC grinder for rolls and heavy shafts up to 4,000 mm between centres and 3 t between centres. Built 2016/2017 by Praise Machinery, Taiwan, and hardly used since. Located in Einbeck (Germany), available at short notice. Inspection by appointment. Technical data (manufacturer's spec sheet): - Swing over bed: 600 mm - Distance between centres: 4,000 mm - Centre height: 320 mm - Max. workpiece weight: 3,000 kg between centres, 6,000 kg on steady rests - Control: Siemens Sinumerik CNC, Siemens drives - Grinding wheel: 760 x 100 x 304.8 mm, 45 m/s, wheel motor 22.5 kW, stepless spindle speed - X-axis travel 315 mm, 0.0005 mm/pulse; Z-axis travel 4,400 mm, 10–6,000 mm/min - Workhead speed 8–80 rpm, 11.25 kW - Tailstock quill stroke 100 mm, MT 6 - Accuracy: roundness and cylindricity 0.002–0.005 mm, Ra ≤ 0.3 µm - Hydrostatic/hydrodynamic lubrication of wheelhead and carriage - Connected load approx. 45 kW, 400 V / 50 Hz - Footprint approx. 13,000 x 2,900 x 1,800 mm, weight approx. 14.7 t Equipment: - Swivel workhead 0–90° - Electromechanical tailstock quill with foot pedal - Crowning device (type C2) - Grinding wheel guard sensor - 4-jaw chuck - 2 two-point steady rests (neck Ø 100–300 mm) - Dresser, wheel flange with puller, dial gauge, magnetic base - Coolant system with magnetic and paper band filter - Full enclosure with sliding doors, telescopic covers - Electrical cabinet with air conditioner - CE documentation, operating manual Dismantling, transport and re-installation can be arranged. Price on request.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,800 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain 530, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 630 mm Spindle speed max.: 15,000 rpm Tool holder: BT40 MACHINE DETAILS Control system manufacturer: Heidenhain 530 Operating hours: 9,800 h Nedpfx Asz Apd Ueb Ujlg Machine weight: approx. 7,700 kg EQUIPMENT Chip conveyor