Walking floor

H & W H + W HWDKSS38 93 m³ Liftachse

Year of construction: 2011, condition: ready for operation (used), A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible. Hjdpfju Nlkxsx Aa Seff

Condition: refurbished (used), functionality: fully functional, Vibro screen type HVSM 1000x3500 generally reconditioned (workshop refurbished) with new bearing (spherical roller bearing) and new oscillating elements Make: HAAS Year of manufacture: 1996 Condition: good ( reconditioned) Channel width: approx. 1000 mm Channel length: approx. 3500 mm Gutter height: approx. 150 mm Wall thickness: approx. 5 mm Discharge height: approx. 150 mm Total height: approx. 300 mm Screening capacity: approx. 10 m³/h (for wood chips and sawdust) Fractions: 2 Screen area: approx. 2.2 m² per screen mesh size Screen decks: 1 piece (screen zone D = 10 mm, L = 2,200 mm) Drive power: approx. 4.0 kW Weight: approx. 800 kg Machine colour: RAL 6011 Reseda green without electrical installation Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass Hfedpfx Aajwqx Hkj Sef - waste wood - bark Screening machine | vibrating screen | vibro screen | vibro screening machine | vibrating screen | wood chip screen | screening machine for wood chips | screening machine for cogeneration plant

Condition: good (used), 3 conveyor belts with belt, rollers and drive: 2x approx. 1,000 x 10,900 mm Hsdpot Ua Saofx Aa Soff 1x approx. 1,000 x 10,000 mm 7.5 kW drive

Condition: ready for operation (used), For sale: conveyor belt, 20 m long, belt width 0.8 m. Galvanized steel construction. A new belt is included with the conveyor. Possibility of transport. Hedpfju Tpi Dsx Aa Seff

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 34 h, load capacity: 8,000 kg, lifting height: 3,440 mm, free lift: 1,170 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, fork carriage width: 2,120 mm, fork length: 2,400 mm, empty load weight: 12,500 kg, total length: 4,100 mm, drive type: Diesel, construction width: 2,130 mm, Diesel Forklift Load center of gravity: 600 Fork width: 150 mm Fork thickness: 70 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: New Front tires type: Superelastic Front tires size: 8.25-15 non-marking Rear tires type: Superelastic Hedpsv Ihkhjfx Aa Soff Rear tires size: 8.25-15 non-marking Description: In addition to this Clark model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, would be happy to advise you in detail about this C80D. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom builds for forklifts weighing 8 tons and over. We would also be happy to display your vehicle for consignment sale. Sideshift, fork positioner, Heating, full cab, full free lift, DPF

Condition: ready for operation (used), The subject of my listing is a conveyor belt with a length of 13 m and a belt width of 0.65 m. Possibility of transport. Hfsdpfx Aasukryns Ssf

Year of construction: 2000, condition: ready for operation (used), 1 piece cover belt conveyor Straight length at the bottom: 2200 mm Climbing length: 14200 mm Conveying height: 9700mm belt width: 650mm Drum motor: Rulmeca Hfodpsmrtx Rsfx Aa Sof Drive power: 2x 1,5 kW Voltage 400 Volt belt speed: 0,4m/s pneumatic tensioned pressure rollers Including some new spare parts and rollers.

Condition: refurbished (used), functionality: fully functional, conveyor belt length: 40,000 mm, conveyor belt width: 800 mm, power: 22 kW (29.91 HP), smooth belt EP630 6:3 Hjdpfjtp Ig Tjx Aa Seff SIEMENS electric drive 22 kW Feed and discharge hopper stable V-support

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Hfjdpfoyizxrjx Aa Ssf Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, empty load weight: 8,560 kg, maximum load weight: 27,440 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,515 mm, loading space width: 2,480 mm, loading space height: 2,625 mm, total length: 13,575 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 9,210 mm, color: black, gearing type: mechanical, Equipment: ABS, Moving floor trailer with side doors. Hire purchase available with no down payment; monthly hire purchase rate €1,099, 84-month term. At lease end: option to purchase at residual value, return, or upgrade to a new vehicle. Full-service rental with subsequent purchase possible. Moving floor semi-trailer, hydraulic connections on the front wall, working platform with access ladder (extendable at rear), moving wall for complete unloading. Front wall made of aluminum profiles with heavy-duty upper frame profile. Sidewalls made from 35x268 mm hollow aluminum profiles. Aluminum double wing doors. Legras moving floor system, floor type 10. PVC rolling tarpaulin with 3 removable crossbars. 4 tie-down straps with tensioning winches on the outer frame for securing the tarpaulin, longitudinal straps under the tarpaulin. E-wheel holder, basket version for E-wheel. Brake disc 430 mm. Electrical sockets: 2x7 + 1x15 pin. Foldable rear light covers, rubber rear apron on underrun protection, aluminum rims, and more. Ask for our attractive hire purchase or leasing offers. Our general terms and conditions apply. Subject to prior sale. All prices are plus statutory VAT at 19%. Financing offers subject to a positive credit check and available only to German commercial customers. More information available online. SAF axles, aluminum floor, container doors, toolbox, available for rental, disc brakes, lift axle, side door, partition wall, wing doors, built-to-order vehicle, rental options available, alloy wheels, new MOT/emissions test, further equipment available. Hedpfx Aswmr Exoa Soff