Used Ifp-Metalclean Metalclean-50 Easy for sale (37,169)

Condition: excellent (used), Year of construction: 2020, READY FOR IMMEDIATE USE! This degreasing system operates under vacuum using modified alcohols. It is used for degreasing metal components contaminated with oil and chips from mechanical machining. Dodpfxehg Ugis Adrjkr Suitable solvents: modified alcohols Hydrocarbons, Class AIII (flash point > 55°C) Ultrasonic Weber 750W 40kHz Double loading table Double bag filter Oiling for corrosion protection (spraying) Candle filter Very good condition (the system has been used very little) 6-month warranty Available from Service Metalclean AG System process: Spray, immersion, ultrasonic, and steam degreasing, including vacuum drying. Data: Basket dimensions: 480 x 320 x 200 h mm Maximum loading weight: 50 kg Average batches/hour: up to 5 System dimensions: 1600 x 1600 x 2400 mm (h) System weight: 2300 kg Electrical connection: 16 kW Energy consumption: 10 kW/h Solvent volume: approx. 250 liters

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, This degreasing system operates under vacuum (pressure swing process) Dkedpfx Adsqy H H Dorjr with modified alcohol or hydrocarbon. (New system) 12-month warranty Immediately available from St. Gallen With vacuum pressure swing process System process: spray, immersion, ultrasonic, and steam degreasing including vacuum drying. Specifications: Ultrasonic 2*1000 W - 25 kHz Double fine filter Chamber door in bulletproof glass 2-tank system, capacity 400L Double distillation and residual distillation Automatic oil discharge 3-stage water separation Electropolished chamber for ultra-fine cleaning Screw vacuum pump (latest generation) Loading trolley 2 wash baskets, mesh size 7mm and 12mm 12" touch panel Prepared for automatic loading Maximum basket size (480 x 320 x 200 mm) Maximum load weight 100 kg System dimensions 2400 x 2400 x 3300 mm System weight (basic version) 2500 kg Color RAL 9003 (white) RAL 7021 (black)

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2535, type of input current: three-phase, product height (max.): 150 mm, product length (max.): 450 mm, product width (max.): 280 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 16 A, width of welding knife: 480 mm, length of welding knife: 380 mm, overall weight: 750 kg, year of last overhaul: 2018, energy consumption: 8 kWh, Neatly refurbished packaging machine with shrink tunnel. Possibility to test run at our location. Maximum speed of 30 pieces per minute. Maximum single fold film width 600 mm. Transport not included. Dkodpfx Adswutu Rjrsr

Condition: used, Year of construction: 2015, gebraucht 2015 5434 prompt, Zwischenverkauf v China 2200 € Dedpfjynmuiox Adrekr 1 1580 € 2.000 x 50 mm 250 x 50 mm 400 - 2800 1/min 35 mm 2.2 kW 1160 mm 700 mm 1850 mm 150 kg belt grinding- and polishing machine in one device continuous variable revs by frequency converter 2 clamping mandrels quick action clamping chuck incl. underframe users manual in ENGLISH

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, Fully Automatic Solvent Cleaning System KP50 HMA For operation with solvents (hydrocarbons or modified alcohol) under full vacuum. The cleaning and drying process runs fully automatically in a closed working chamber under vacuum. Component cleaning is performed via spraying, turbulence flooding, ultrasonic cleaning, and vacuum-assisted cleaning with freshly filtered and distilled solvent from the two storage tanks. Additionally, the system offers vapor degreasing with ultra-pure solvent vapor directly from the main distillation system. The final vacuum drying step ensures components are 100% dry, and the dual condensation stage minimizes solvent loss as well as emission and workplace exposure values (AGW). Technical data / Equipment: - 2-tank FULL VACUUM system incl. main and bypass distillation - Designed for flammable solvents (FP >55°C) - Includes basket holder with swing/rotation device - Basket dimensions: 520 x 320 x 200(h) mm - Batch weight: max. 50 kg/batch - System dimensions: approx. 2,300 x 2,250 x 3,000 mm (W x D x H) - Ultrasonic: 750 W, 40 kHz - 2 bag filters size 1 + preparation for an additional filter - Automatic working chamber door Djdeyi Sf Nspfx Adrekr - Working chamber door in glass - Double loading table (sideways movable) in front of working chamber - 12" control panel - Main and bypass distillation - Remote maintenance module A chiller unit can be supplied optionally, if no cooling water is available on site. Price excl. VAT, transport, assembly/commissioning

Condition: ready for operation (used), Year of construction: 2017, A continuous servo side sealing machine IFP for the food industry is available. Packaging capacity: 100 packages/min, max. sealing dimensions: 650mm, max. sealing length: unlimited, film material: PP/POF/PVC, max. film reel width: 800mm, max. film reel diameter: 350mm, working height range: 870mm-930mm, output: 9kW, machine dimensions X/Y/Z: approx. 1800mm/2650mm/1500mm, control: Siemens. Documentation available. On-site inspection is possible. Dksdpfx Asvf Iydodrer

Condition: as good as new (ex-display), Year of construction: 2023, heating capacity: 7 kW (9.52 HP), tank capacity: 350 l, inner dimension height: 600 mm, inner dimension length: 900 mm, inner dimension width: 650 mm, input voltage: 400 V, input frequency: 28,000 Hz, High power ultrasonic cleaning machine Ultratecno EASY-350L. Demo machine from 2023 used for presentations and exhibitions by the distributor in Poland. Excellent condition, like new. Highest quality of components and several innovative solutions backed by 50 years of experience in manufacturing of ultrasonic cleaning machines. Included pneumatic elevator with platform for max. load 125 kg (max. static load 250 kg). Oil separation tank with pump. Special 50mm insulation. Working chamber dimensions: 900 x 650 x 600 mm. Ultrasound frequency: 28 kHz. Ultrasound power: 2 kW. Dsdpfjq Ruxmex Adrokr More technical information included in attached technical sheet. Manufactured in Spain.

Condition: used, lifting height: 4,090 mm, Year of construction: 2019, operating hours: 3,710 h, Empty weight: 5.000 kg Dimensions (LxBxH): 551 x 184 x 252 cm Dkodpfx Adjzpaizsror Track width: 40 cm Digging depth: 3.625 m

Condition: as good as new (ex-display), Year of construction: 2026, The outstanding advantages: Space-saving, compact design – comfortable and powerful. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture area thanks to air deflectors – also suitable for larger workpieces. Separation rate of paint mist up to 99%, pre-filter retention capacity up to 18 kg/m² – resulting in a long filter life! Easy and quick filter change on the front. Cost-effective replacement filters. Low purchase costs and extremely low energy consumption. Dry spray wall made of galvanized steel sheet with welded base frame, cardboard labyrinth filter as a pre-filter, and fiberglass filter as a secondary filter. Ex-fan incl. throttle valve mounted on the left. Don't compromise on surface quality. Easy Paint extraction walls are the ideal, cost-effective solution for effectively capturing and filtering paint mist and extracting solvent vapors. Robust and powerful, yet economical in consumption. Dksdpfx Adecnz Iqsror The IPE dual filtration system ensures that two filter stages provide a maximum separation rate of up to 99%. The cardboard labyrinth filter initially absorbs significantly more overspray (up to 18 kg/m² filter area) than conventional filter mats, thanks to its folded filter pockets. The subsequent fiberglass secondary filter only absorbs the finest residual particles. As a guideline, a service life of approximately 150 to 200 painting hours can be specified for the cardboard labyrinth filter, depending on the paint used. The fiberglass filter only needs to be replaced after approximately 900 to 1200 painting hours, i.e. only every 5th or 6th cardboard filter change. Easy Paint also has a lower intake opening to quickly and safely capture solvent vapors at the floor level or from floor pits. Thanks to this additional intake opening at the bottom, the Easy Paint can be connected to a floor pit or drip tray as an underfloor extraction system. The filter cassette, which can be inserted from the front, also makes filter changes easier. Standard extraction capacity Easy Paint 3500 Item No. 600025 Airflow rate with standard delivery * 3500 m³/h Primary filter area 2.5 m² Secondary filter area 2.0 m² Motor power 400V/50Hz 1.1 kW ex Connection fitting for extraction hose D = 300 mm Width in mm 2750 Total height in mm 1455 Depth in mm with capture area 855 Weight in kg 145 Location: In stock at Bitburg Exhibition machine at a special price.

Condition: new, Year of construction: 2026, Type designation and technical data Dedpjb R D U Ssfx Adrekr The outstanding advantages: Space-saving compact design – comfortable and high-performance. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture area thanks to air guide plates – also suitable for larger workpieces. Separation rate for paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² – resulting in a long filter life! Simple and quick filter change on the front side. Cost-effective replacement filters. Low initial costs and extremely low energy consumption. Dry spray booth made of galvanized sheet steel with a welded base frame, cardboard labyrinth filter as a pre-filter, and fiberglass filter as a post-filter unit. Ex-fan including throttle valve mounted on the left side. Do not compromise on the quality of the surface finish. Easy Paint extraction walls are the ideal, cost-effective solution for the effective capture and filtration of paint mist and the extraction of solvent vapors. Robust and high-performance, yet economical in consumption. Standard extraction capacity Easy Paint 3500 Article No. 600025 Airflow rate in standard configuration * 3500 m³/h Primary filter area 2.5 m² Secondary filter area 2.0 m² Motor power 400V/50Hz 1.1 kW Connection for extraction pipe D = 300 mm Width in mm 2750 Overall height in mm 1455 Depth in mm with capture area 855 Weight in kg 145 Location: In stock at Bitburg Exhibition machine available at a special price.

Condition: good (used), Jones and Shipman Suprema 650 M Easy Universal OD/ID Cylindrical Grinder s/n SO19131, w/ J&S PLC Control, 12" Swing x 25" Centers, Swivel Wheelhead w/ OD & ID Capability, Internal Spindle, Hydromation Coolant System, Heidenhain DRO, Workholding NOT Included Dkjdpfxoywfyqs Adrjr

Condition: used, Year of construction: 2012, grinding diameter max. 320 mm grinding length 1.500 mm centre height 160 mm Control Touch Jones & Shipman between centers max. 100 kg Traverse Z-Axis 1.645 mm traversing speed m/min swivable +5 / -5 ° Traverse X-Axis 260 mm traversing speed - 6 m/min grinding wheel motor 7,5 kW cutting speed 45 m/s Grinding wheel Ø x width x bore 450 x 50 x 203,2 mm Swivel range -15 / +90 ° Dkedjtqmrpopfx Adror turning speed range 0 - 660 U/min Torque 27 Nm tool adaptor MK 3 weight of the machine ca. 8,5 t dimensions of the machine ca. 5,5 x 2,5 x 2,0 m Cylindrical Grinding Machine JONES & SHIPMAN - Suprema Easy 1500 E - Replacement grinding wheel flange - Multi-grain diamond (for circumferential and lateral dressing, 10mm, 1 carat) - Tailstock with micro adjustment (max. adjustment range +-0.05mm) - Pneumatic quill retraction - Two-jaw bezel (range 8-75 mm)

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) Dkjdpfx Adjfgyicoror *Switch with pictogram, easy and clear to use

Condition: new, cutting diameter 255 mm saw band length 2765x 0,9 x 27 mm cutting width 300 x 180 mm turning speeds 35 + 70 U/min total power requirement 1,8 kW weight of the machine ca. 450 t dimensions of the machine ca. 1,7 x 1,23 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed Dodjfn Andepfx Adrokr • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t Dodpfx Aefgyh Uodrjkr dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: excellent (used), CATALOG NUMBER 7186 TECHNICAL DATA - Max. planing width: 510 mm - Max. planing height, double-sided: 170 mm - Max. planing height, four-sided: 100 mm *Top section: - Infeed roller, toothed - Kickback fingers - Feed roller, toothed - Pressure bar - Planing shaft 510 mm, 4-knife (equipped with 2 knives) 4 kW - Outfeed roller, smooth *Bottom section: Djdsztalqepfx Adrekr - Guide rail - Sliding roller – adjustable table with up/down roller - Planing shaft 510 mm, 2-knife 4 kW - 2 smooth, sliding, adjustable rollers *Rear section: - 2 side spindles + pressure unit - 1) right vertical 100 mm 2.35 kW - 2) left vertical 100 mm 2.35 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Manual thickness adjustment - 4 feed speed options - Feed motor 1.5 kW - Overall dimensions (L/W/H): 1940 x 1320 x 1140 mm - Weight: 1330 kg ADVANTAGES – Ideal for processing beams, flooring, etc. – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7134 TECHNICAL DATA - Max. planing width: 500 mm - Max. planing height: 190 mm Top section: - Anti-kickback fingers - Pulling feed roller, sequential - 2 rows of pressure rollers - Pull-in feed roller, sequential - 500 mm planing cutterhead, 4-knife, 7.5 kW motor - Pressure rollers - Smooth, pulling outfeed roller - Outfeed pressure roller Bottom section: - Adjustable infeed table + pressure roller - Smooth sliding roller - 500 mm planing cutterhead, 4-knife, 5.5 kW motor - 2 smooth sliding rollers - Side pressure roller Rear section: - Side spindles: 1) Right vertical 140 mm, 4 kW 2) Left vertical 140 mm, 4 kW - Spindle diameter: 40 mm - Spindles adjustable up/down, right/left - Stepless feed speed adjustment: 8–30 m/min Dsdpfjzh Iz Asx Adrekr - Electric table lifting - Extraction port diameters: 2x145 mm, 2x160 mm - Dimensions (L/W/H): 2050 x 1700 x 1700 mm - Weight: 2100 kg FEATURES – Ideal for flooring production – Electric table lifting – Czech manufacture – Used planer, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR (based on EUR rate 4.2) (Prices may change with significant fluctuations)

Condition: good (used), GUK K50/4/1/FL 2-50 Automatic Folding Machine Machine in perfect condition, ready for production. Format: 500x700mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes electronically adjusted via computer 1 cross-cut knife First cassette extended. Continuous speed control via inverter control panel Counter with batching function and folding speed indicator. Rietschle compressor. Raised soundproofing hood. Dkodpjzmu Hcofx Adrer Tool roller for mounting tools such as perforation, creasing, and cutting. FL2-50 feeder with vacuum unit Window cassette with control unit. Mobile delivery with continuous speed control.

Condition: good (used), Schmedt PraForm 21-50 joint-setting press Book press with a joint forming. Production Schmedt, Germany. The machine is in very good condition, ready for production. Technical data: max format: 450 x 520 x 100 mm Dodpozmnikofx Adrokr Weight 264kg Power supply 230V + compressed air.

Condition: good (used), KAS Crease Matic Auto 50 Automatic Creaser Machine in very good condition, from a state-owned institution. Dodszlgcyjpfx Adrekr Description: Working width up to 500 mm. Sheet length up to 999 mm. Programmer with the ability to store up to 28 creasing/perforation positions. Sheet feeding is automatic, and the machine has a built-in Becker compressor. Easy-to-use control panel with the ability to store up to 99 programs. Sturdy metal construction mounted on wheels for easy movement. A longitudinal perforation tool is included. Creasing of digital prints and laminated sheets is possible. Four creasing widths are included with the machine. Large work table. 230V power supply. Weight 190 kg.

Condition: excellent (used), CATALOGUE NUMBER: 6507 TECHNICAL DATA SURFACE PLANER: - shaft width: 510mm - rollers in the bottom table - original cast iron tilting fence - table length: 1810mm - both tables adjustable THICKNESSER: - max thickness of workpiece on thicknesser: 200mm - cutterhead guard on the thicknesser from above: - pawls - geared infeed roller - pressure bar - planer cutterblock - pressure bar - smooth outfeed roller from below: - 2 adjustable rollers in the bottom table - 2 feed speeds - main motor: 2.95kW - dimensions (LxWxH): 1940x1200x1120mm Dkjdezmg N Njpfx Adrsr - weight: 970kg Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), I am offering for sale a professional RF signal generator, the Agilent 83651B Synthesized Sweeper, designed for laboratory, research and development, and service applications. This device is used for testing microwave circuits, telecommunications equipment, and high-frequency measurements. Model 83651B offers a wide frequency range from 10 MHz to 50 GHz, making it ideal for laboratories involved in electronics, microwave technology, and telecommunications. The device is equipped with numerous measurement and control connectors, a GPIB interface, 10 MHz reference inputs and outputs, and the ability to interface with other measuring instruments. The equipment comes from a dismantled laboratory. It has not been tested by us and is sold as a used device. The visual condition is shown in the attached photos. Technical specifications: Manufacturer: Agilent Technologies Model: 83651B Dedpezl H Ddefx Adrjkr Type: Synthesized Sweeper / RF Signal Generator Frequency range: 10 MHz – 50 GHz Power supply: 230 V AC, 48–66 Hz Communication interface: GPIB (IEEE-488) 10 MHz reference input and output Control inputs and outputs (Trigger, Sweep, FM, AM, Pulse) Applications: laboratories, research and development, telecommunications, microwave technology, RF measurements Condition Used device. Not tested. Good visual condition, with normal signs of use visible in the photos. Sold in the exact condition as shown in the photographs.

Year of construction: 2023, condition: excellent (used), Invoice: I issue a VAT invoice Brand: unbranded Type: hydraulic pump Model: Type- CBL 50-200/200 Manufacturer code: 2 Packaging condition: no packaging Djdjy Amumepfx Adrjkr

Condition: excellent (used), CATALOGUE NUMBER 7606 Dkodozkhryepfx Adrsr Technical data: - Shaft width: 500mm - Number of knives: 3 pcs - Shaft guard - Table length: 2530mm - Cast iron tables - Both tables adjustable - Original cast iron fence adjustable at an angle - Motor: 3kW - Dimensions (L/W/H): 2530x1000x1100mm - Weight: 920kg ADVANTAGES – Made in Italy – 3-knife shaft – Used jointer – Very good condition Net price: 8,900 PLN Net price: 2,100 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7618 TECHNICAL DATA - shaft width: 500 mm - number of knives: 4 pcs - max thickness of workpiece: 230 mm top section: - anti-kickback fingers - toothed, feed, swivel, sequential infeed shaft - pressure rollers - planing shaft - pressure roller - smooth feed outfeed shaft bottom section: - 2 slip rollers in the table - motor: 5.5 kW - manual table height adjustment - 2 feed speeds: 7.5; 13 m/min - extraction port diameter: 160 mm - dimensions (L/W/H): 1100x1000x1200 mm - weight: 600 kg ADVANTAGES Dsdpfszkg T Nex Adrekr – made in Italy – original paint (not repainted) – used thickness planer, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)