Used Impact Screw Compressor For Laser 16Bar for sale (13,909)

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser – RMZY Series (15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: RMZY Series (16 Bar Version) Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Gedpfx Acoy Ecuzetsiw Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2025, AHB-20A screw compressor special for laser machine double use 8 till 16 bar G3/4 connection 380 volt 3 phase 50Hz air delivery 1,2 m3/min Tank 500 l High Efficiency Refrigerated Air-dryer include High Efficiency Precision Filters include Air supply without oil and water two stge screw type INCLUDE IN THE PRICE: 1 airfilter ( have to change after 3000 hours ) 1 oil filters ( 1 change after 500 hour second after 3000 hours ) 1 separator ( change after 3000 hours ) Advantanges High Pressure Screw Air Compressor SPECIAL FOR LASER MACHINES Integrated Design Air compressor, air dryer, air tank and line filters integration. Avoid the trouble to connect the pipes, can use it after power on. Air Supply Without Oil and Water The compressed air contains oily water mist and oil, and high-pressure spraying on the protective mirror will seriously affect the transmission of the laser beam, disperse the focus, cause the product to be cut through, and produce waste. Intelligent Monitoring ( option ) Smart housekeeper remote monitoring, 24-hour online monitoring, no need for special management to open the phone to quickly obtain machine operation information, When the machine encounters a malfunction or needs maintenance, the system will automatically send an early warning message. Giodpfxem E Im Te Actjw High Quality Spare Parts High-End Air End The double screws adopts the latest line design, high-precision processing, reduces the leakage of compressed air, reduces power consumption, and saves money for customers. Imported Electronic Accessories Imported electronic components, high protection and safety level, to ensure the stable operation of the equipment, and the electrical part is enlarged by 30-50%. High Efficiency Precision Filter Using high-precision and high-pressure-resistant filters, multiple filtrations to ensure that the gas supply is oil-free and water-tree, ensuring production. Large Capacity Air Tank Large capacity, more energy-saving and electricity-saving, thicker material, buffering, cooling, water removal, and stable air pressure. FOR MORE INFORMATION PLS TAKE CONTACT WITH US. J.C. Helthuis Coevorden Netherlands

Condition: like new (used), Kaeser M30 PE screw compressor on a trailer The unit is in perfect condition, like new. The unit was purchased from a warehouse and has never been used. Only 50 hours of operation. Technical specifications: Operating pressure: 7 bar 18.2 kW motor Automatic start Giodpfx Acszlaa Eetew Capacity: 3 m3/min Weight: 595 kg Year of manufacture: 2022/12

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Made in Germany Good working condition Gijdpsyb Sdiofx Actew

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut FSCUT, controller model: 2000E, laser type: fiber laser, laser source manufacturer: MAX/RAYCUS 3000, laser source model: 3000, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 1,350 mm, table width: 930 mm, working length: 1,300 mm, working width: 900 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, fume extraction, CNC Laser machine for sheet metal, complete close and compact design. IMPACT CL-1390 Fully automatic Metal Cutting Machine 1300*900 fiber laser cutting machine with economical price. Small laser cutting machine, compared to regular laser cutting machines, boasts higher precision and excels in cutting high-reflective materials with smaller kerfs and no burrs, thereby reducing the cost of secondary processing. Often referred to as a "desktop" or "medium-format" model, its enclosed design and axis configuration make it the gold standard for safety and detail. Maximum Safety & Environment - The fully enclosed cabinet provides a light-tight environment, protecting operators from laser reflections and eliminating the need for safety goggles. It also features a dedicated ventilation port to efficiently extract fumes and dust, keeping your workspace clean and healthy. Compact & Versatile - With a 1.3m x 0.9m workspace, this model bridges the gap between hobbyist tools and massive industrial cutters. It is small enough to fit through standard double doors but powerful enough to handle most type of production parts. Stability and Protection - The "closed" box structure acts as a rigid frame, reducing vibrations during high-speed and fly cutting movements. Additionally, the enclosure protects sensitive internal components—like the laser head and guide rails—from external debris, significantly extending the machine's lifespan. IDEAL for precision parts, thin sheets and small-medium size workpieces: ( up till 20 mm thickness steel ) Gijdpox Rn Tmjfx Actew • Auto-focus laser head and Automatic edge detection; • Stable cutting quality; • Compact footprint with complete closed design for safety and environment, CE standard; • Easy to operate. Intelligent control system Intelligent control system, real-time monitoring, many functions, safe production, large-size high-definition screen, ergonomic design. Windows interface with CYPCUT software controller offers a simple yet intuitive control with optimization and nesting functions included. Also it allows internet connection so that a remote intervention can be made when needed. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display Automatic oil lubrication system Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system OD4+ laser protection glass system with fully enclosure Voltage stabilizer & regulator unit CE mark Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, functionality: fully functional, laser power: 1,500 W, travel distance X-axis: 1,530 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 100 mm, This series from IMPACT is an economical, single-platform laser cutting machine. Its space-saving design makes it easy to load and unload the cutting table, which is accessible from all sides of the machine. Suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, and brass. It meets various cutting needs for most sheets and is ideal for a wide range of industries. It ensures flexibility in your production, being very easy and quick to operate. We provide all the support you need to start production in a few days. TECHNICAL FEATURES: • Compact electrical cabinet, integrated into the machine construction to save space; • Large LCD operating panel and easy-to-use mobile arm support; • Remote technical troubleshooting - Equipped with internet connectivity; • Laser head with automatic focus and anti-collision functions; • Industrial components from renowned manufacturers with high reliability; • Access on both sides for dust carts; • Safety systems for operator and machine safety; • CE standard. TECHNICAL SPECIFICATIONS: Gedoxfiwyepfx Actoiw Model: FM3015 Laser power: 1.5 kW (MAX source) Maximum cutting thickness (1.5 kW): STEEL: 12 mm / STAINLESS STEEL: 8 mm / AL: 4 mm Working area: 3,050*1,530 mm X/Y/Z axis travel: 1,530 / 3,050 / 100 mm Maximum load on machine table: 800 kg Positioning accuracy: ±0.03 mm Repeatability accuracy: ±0.03 mm Maximum speed: 80 m/min Acceleration speed: 0.8G Exhaust system: Included (with centrifugal motor fan) Laser source and head cooling system: Included Machine size (reference): 4,500*2,250*1,920 mm Total weight: 2,500 kg Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2026, laser power: 3,000 W, laser wavelength: 1,064 nm, working length: 3,050 mm, working width: 1,530 mm, Model: IMPACT Laser OP-3015H Cutting Size: 3050*1530mm Laser Power: 3000W or 6000W Laser Generator: MAX Laser Wave Length: 1064nm Position Accuracy: 0.02 mm/m Repeatability Accuracy: 0.01 mm Max Acceleration:1G Cutting Speed: 0-140 m/min Interface: USB,RJ45 Working Voltage: 1000-2000W:220v, 2phase, 50hz 3000W:380v, 3phase, 50hz Working life of fiber module: More than 100000 hours Work Environment: 0-45°C, Moisture 45-85% Machine structure: Big thickness stable & strong square tube welded steel bed Beam: Aviation grade tensile aluminum beam Brand of Motor and Drivers: China Innovance Servo motor and drivers (1800W*2+850W+400W) Transmit System: Dual Rack & Pinion type Control System: FUSCUT 4000E Controller Cutting Head: BLT421 automatic focus cutting head Reducer: Italian Motovario reducer Liner Guider System: Taiwan Hiwin (X 25mm, Y 30mm, Z 20mm) Water Chiller: S&A Computer: Industry computer Automatic lubrication system: Yes Pneumatic proportional valve: Japan SMC Prices: 3kW: 39.500€ 6kW: 44.500€ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer Giedpfx Aceyut Dketjw CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2026, laser power: 3,000 W, laser wavelength: 1,064 nm, working length: 3,050 mm, working width: 1,530 mm, Model: IMPACT Laser OP-3015H Cutting Size: 3050*1530mm Laser Power: 3000W or 6000W Laser Generator: MAX Laser Wave Length: 1064nm Position Accuracy: 0.02 mm/m Repeatability Accuracy: 0.01 mm Max Acceleration:1G Gisdpfx Ajytd Scjctow Cutting Speed: 0-140 m/min Interface: USB,RJ45 Working Voltage: 1000-2000W:220v, 2phase, 50hz 3000W:380v, 3phase, 50hz Working life of fiber module: More than 100000 hours Work Environment: 0-45°C, Moisture 45-85% Machine structure: Big thickness stable & strong square tube welded steel bed Beam: Aviation grade tensile aluminum beam Brand of Motor and Drivers: China Innovance Servo motor and drivers (1800W*2+850W+400W) Transmit System: Dual Rack & Pinion type Control System: FUSCUT 4000E Controller Cutting Head: BLT421 automatic focus cutting head Reducer: Italian Motovario reducer Liner Guider System: Taiwan Hiwin (X 25mm, Y 30mm, Z 20mm) Water Chiller: S&A Computer: Industry computer Automatic lubrication system: Yes Pneumatic proportional valve: Japan SMC Prices: 3kW: 39.500€ 6kW: 44.500€ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, functionality: fully functional, control type: CNC control, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, table length: 3,050 mm, table width: 1,530 mm, working length: 3,050 mm, working width: 1,530 mm, cutting speed: 120 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.02 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, IMPACT 3015A Fiber laser cutting machine suitable for high-precision cutting of metal plates, with high photoelectric conversion rate. It is a new energy-saving and environmentally friendly product, and one of the world’s leading technology products. It is suitable for cutting metal plates such as stainless steel, carbon steel, alloy steel, silicon steel, aluminum, copper, brass, titanium alloy, galvanized sheets, etc. Unmatched Accessibility - Because the machine is an "open type" (without a full protective enclosure), operators have 360° access to the cutting bed. This makes loading raw sheets and unloading finished parts significantly faster and easier, especially when using a forklift or overhead crane. Space Efficiency - The 3015 model is designed with a compact footprint. Without the bulk of a large safety cabin or a dual-shuttle table system, it fits comfortably into smaller workshops where floor space is at a premium, providing a high "power-to-square-foot" ratio. Cost-Effectiveness - Open-type machines generally have a lower initial investment compared to fully enclosed or exchange-table models. They are also easier to maintain, as all mechanical components (rails, racks, and motors) are readily accessible for routine cleaning and lubrication. Efficient and precise cutting of medium and thin plates: • Easy access for loading and unloading the material from all 4 sides; • Auto-focus laser head; • Automatic edge detection; Giodpfxsyhclwo Actow • Nesting included for optimizing the drawings and optimize material usage; • Easy to operate; • CE standard. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display 18.5 inch Automatic oil lubrication system Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system Voltage stabilizer & regulator unit CE mark Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, functionality: fully functional, Year of construction: 2025, travel distance X-axis: 50,000 mm, travel distance Y-axis: 4,000 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: cooling unit, GS-50040LB (Bevel Cutting) Ultra-Large Format Laser Cutting Machine 40kW Bevel Cutting + 60kW Straight Cutting Dual Beam, Dual Head, Dual Ultra Ultra-Large Cutting Area: 50m × 4m Dual High-Power Cutting Heads – 60kW Straight & 40kW Bevel Cutting Gsdpfxjv Ng E Tj Actjiw Precision Cutting for Ultra-Thick Plates Bevel Cutting Performance: ✔ Y-Bevel: 40kW | 20mm Carbon Steel | 1.4m/min ✔ K-Bevel: 40kW | 30mm Carbon Steel | 0.35m/min ✔ V-Bevel: 40kW | 50mm Carbon Steel | 0.2m/min ✔ Straight Cutting: 60kW | 150mm Carbon Steel | 0.3m/min Applications: Aerospace | Shipbuilding | Bridges | Heavy Machinery

Condition: new, power: 75 kW (101.97 HP), Year of construction: 2026, An impact crusher is a machine that uses striking as opposed to pressure to reduce the size of a material. Impact crushers are versatile and widely used in various industries for the crushing of hard, abrasive materials. They operate by applying force on the material to be crushed, breaking it into smaller pieces. Here is a general introduction to impact crushers: The impact crusher is a versatile machine used for various applications in construction, mining, and recycling industries. Below are some of the key applications of an impact crusher: 1. Primary and Secondary Crushing Impact crushers are commonly used in both primary and secondary crushing stages. In primary crushing, they break large rocks into smaller, more manageable sizes, and in secondary crushing, they refine the material further into smaller grades. 2. Production of Aggregates Impact crushers are widely used in the production of aggregates for construction. They are effective at producing a wide range of materials, including: Crushed stone for road construction. Sand for concrete and asphalt production. Gravel for general construction and drainage. 3. Recycling One of the most significant applications of impact crushers is in the recycling industry, especially for processing construction and demolition (C&D) waste, which includes materials like concrete, brick, and asphalt. The crushers help convert waste into usable products such as: Recycled concrete aggregates (RCA). Asphalt. Recycled sand and gravel. 4. Mining Industry Impact crushers are used in the mining industry to process ore materials. These crushers help break down large rocks and ores into smaller pieces, making them easier to process for extraction of valuable minerals like gold, copper, and other metals. 5. Production of Manufactured Sand In the production of manufactured sand for concrete, impact crushers are used to break down larger rocks into fine particles, which are then used as an alternative to natural sand. This is especially useful in areas where natural sand is scarce or environmentally protected. 6. Construction and Road Building Impact crushers are integral in the production of materials for road construction, such as base and sub-base materials. These materials are crucial for the stability and durability of roads, highways, and foundations. 7. Industrial Applications Impact crushers are also used in various other industrial applications, such as: Cement production: Crushing limestone and other materials for cement manufacturing. Glass recycling: Breaking glass waste into smaller pieces for recycling. Gjdpfx Acoq I N Iqeteiw 8. Demolition and Dismantling Impact crushers are used in demolition projects where buildings or structures need to be demolished and the materials crushed for reuse or disposal. They help reduce the size of debris like concrete, asphalt, and bricks into smaller, manageable pieces.

Condition: new, Year of construction: 2026, HSI Crusher and Impact Crusher: Efficient Solutions for Limestone and Talc Crushing Introduction An HSI crusher (Horizontal Shaft Impact crusher) is a highly efficient crushing machine widely used in mining, quarrying, and aggregate production. As a key component in a limestone crushing plant, it delivers precise shaping and high reduction ratios. Whether used as a limestone crusher or talc crusher, the HSI impact crusher ensures consistent particle size and superior performance across various materials. Features of HSI Impact Crusher High Crushing Efficiency The impact mechanism uses high-speed rotors and blow bars to achieve fine and uniform crushing results. Versatile Applications Suitable for medium-hard to soft materials such as limestone, talc, gypsum, and coal. Adjustable Output Size Hydraulic or mechanical adjustment systems allow easy control of product size. Durable Components Godpfxsq Ny Sae Acteiw Wear-resistant blow bars and liners extend service life and reduce maintenance costs. Easy Maintenance Quick access doors and modular design simplify inspection and part replacement. Energy Efficiency Optimized rotor design and balanced operation minimize energy consumption. Technical Specifications (Typical Range) Model:1214 Max input size： 300 mm, Capacity: 100-140 t/h Model:1315 Max input size: 350mm Capacity: 150-200 t/h Specifications may vary depending on material hardness and feed size. Applications Limestone Crushing Plant: Primary or secondary crushing of limestone for cement, aggregates, and construction materials. Talc Crusher: Fine crushing of soft minerals like talc and gypsum for powder production. Aggregate Production: Produces cubical-shaped aggregates ideal for asphalt and concrete. Recycling: Effective for crushing concrete, asphalt, and demolition waste. Why Choose a Reliable Impact Crusher Manufacturer Selecting a trusted impact crusher manufacturer ensures high-quality materials, advanced design, and reliable after-sales service. A professional supplier provides customized solutions for specific materials, such as limestone crusher or talc crusher, ensuring optimal performance and long-term durability. Impact Crusher for Sale Modern impact crushers for sale feature advanced automation, energy-saving systems, and improved wear resistance. They are ideal for operators seeking high productivity, low operating costs, and consistent output quality in both stationary and mobile crushing setups. Conclusion An HSI impact crusher is a versatile and efficient solution for crushing limestone, talc, and other medium-soft materials. With robust design, adjustable settings, and high throughput, it plays a vital role in any limestone crushing plant or mineral processing line. Choosing the right impact crusher manufacturer ensures reliable performance, reduced downtime, and long-term value.

Condition: new, functionality: fully functional, power: 75 kW (101.97 HP), Year of construction: 2025, Impact Crusher: Structure, Operation, and Technical Specifications An impact crusher is a high-efficiency crushing machine widely used in mining, cement, construction, and recycling industries. It is designed to crush materials by utilizing the energy of impact rather than pressure, making it ideal for medium-hard and soft materials such as limestone, gypsum, coal, and concrete aggregates. Its ability to produce uniform, cubic-shaped particles makes it a preferred choice for aggregate production and fine crushing applications. Working Principle The impact crusher operates on a simple yet powerful principle: material is fed into the crushing chamber and struck by high-speed rotating blow bars mounted on a rotor. The kinetic energy from the rotor transfers to the material, causing it to break upon collision with the impact plates (also known as breaker plates). The crushed material rebounds within the chamber for secondary impacts until it reaches the desired size and exits through the discharge opening. The process involves: Primary Impact: Material is hit by blow bars and thrown against the impact plates. Secondary Impact: Rebounded fragments collide again with the rotor or other particles, achieving finer crushing and better shape. Structural Composition An impact crusher consists of several key components that ensure efficient operation and durability: Rotor Assembly: The core component, equipped with blow bars that deliver high-speed impact energy. Impact Plates (Aprons): Adjustable plates that control the crushing gap and final product size. Feed Inlet and Discharge Outlet: Designed for smooth material flow and uniform discharge. Frame and Housing: Heavy-duty welded structure providing stability and vibration resistance. Adjusting Device: Hydraulic or mechanical system for controlling the gap between rotor and impact plates. Safety Mechanism: Hydraulic opening system for easy maintenance and overload protection. Technical Highlights Feed size: ≤500 mm Discharge size: 0–60 mm (adjustable) Capacity: 30–800 t/h Motor power: 45–560 kW Rotor speed: 500–1500 rpm Performance Features: High Crushing Efficiency: The high-speed rotor and optimized chamber design ensure strong impact force and high reduction ratio. Excellent Particle Shape: Produces cubic, uniform aggregates suitable for concrete and asphalt production. Adjustable Output Size: Hydraulic or mechanical adjustment allows precise control of product size. Easy Maintenance: Replaceable blow bars and liners with quick access doors simplify servicing. Versatile Applications: Suitable for primary, secondary, and tertiary crushing in various industries. Types of Impact Crushers Horizontal Shaft Impact (HSI) Crusher: Gedev E Ddlopfx Acteiw Uses a horizontal rotor to deliver impact energy. Ideal for soft to medium-hard materials and widely used in aggregate and recycling applications. Conclusion The impact crusher combines high-speed impact energy with a robust structural design to deliver efficient, reliable, and versatile crushing performance. Its ability to produce well-shaped aggregates, adjustable output sizes, and low maintenance requirements make it indispensable in modern crushing systems. Whether in mining, construction, or recycling, the impact crusher remains a key machine for achieving high productivity and superior material quality.

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor). Gedpfx Acoyy U Shetsiw

Condition: used, Schraubenkompressor / Screw Compressor ECOAIR D 50 Baujahr / Year 1991 - Serial-No. 27020521 Verdichtungsdruck / Compression Pressure 10 bar Drehzahl / Rotation Speed 2950 u/min Volumenstrom / Volume flow 5,0m2/min Leistungsbedarf des Verdichters / Power requirement of the compressor 37 kW  Godpsxiv Rnefx Actjiw Abmessungen / Dimensions 200 x 80 x 150 cm  Gewicht / Weight 730 kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2012, operating hours: 34,014 h, functionality: fully functional, Screw compressor, Atlas Copco GA30VSDFF 30 kW 12.80 bar 5.58 m3/min Godpfx Aozkwfvsctoiw Year of manufacture: 2012 Operating hours: 34,014

Year of construction: 2021, condition: good (used), Styrofoam press / compact screw compactor for EPS (Styrofoam®) and XPS, EPS packaging or production waste, Heger – used: Price ex works: only €9,950 (net)! Manufacturer: Heger GmbH, Herrenberg Type: Tiger 130 T Year of manufacture: 2021 3x400V, former new price: EUR 15,000 Throughput 1) up to 15 kg/h Achievable compression 1) up to 250 kg/m³ Processable material densities up to 30 g/l Processable molded part height up to 300 mm Effective feed opening (W x D) 700 x 360 mm Giodpfx Ajzk Da Hsctjw Block size 130 x 130 mm Installation dimensions (L x W x H) 2,824 x 440 x 1,602 mm Machine weight 310 kg Electrical connection power 1.5 kW Supply voltage (EU) 3 x 230 V 50 Hz 3 x 400 V 50 Hz Supply voltage (USA) 3 x 230 V 60 Hz 3 x 480 V 60 Hz CE marking Condition: good – very good, little use Available: immediately Location: 25813 Husum

Condition: new, AGRE ALUP SCK 10-10 270+ Belt-driven. Space-saving. Cost-effective. Easy to operate. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Refrigerant dryer installed. Sound-insulated screw compressor with belt drive on a 270 l compressed air tank, with integrated refrigerant dryer, integrated cyclone separator, electronic condensate drain, and C55 graphic control. Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled Drive: Efficient IE3 motor, belt drive Control: Fixed speed Controller: Aircontrol 5.0 Refrigerant dryer: Mounted, refrigerant R513A Filtration: Incl. cyclone separator Tank: Horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load 10.2 kW Rated motor power; IP55 7.5 kW Oil quantity 4 liters Dimensions and weight: L x W x H = 1530 x 662 x 1531 mm Weight: 310 kg Gisdeixt H Nepfx Actsw Compressed air outlet: G 1/2'' Compressed air tank capacity: 270 liters

Condition: new, Screw compressor AGRE Model Sonetteo 7.5+ 10 Giodshun Tzspfx Actow Compact screw compressor unit including refrigerant dryer and compressed air tank, 270 liters. Belt-driven. Space-saving. Economical. Easy operation thanks to the Infologic² Basic control system. Efficient compression stage. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Refrigerant dryer installed. Detailed features: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control system: Infologic² Basic control unit Refrigerant dryer: Installed, refrigerant R513A Tank: 270 liters, horizontal, painted, 11 bar Motor power: 5.5 kW Pressure: 10 bar Delivery rate: 780 liters/min Including time-controlled condensate drain Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: excellent (used), Year of construction: 2004, operating hours: 59,690 h, functionality: fully functional, Screw compressor Atlas Copco ZR90VSDFF Inverter and dryer integrated. 90 kW 8.75 bar 14.70 m³/min Godjyuvwaopfx Actoiw

Condition: as good as new (ex-display), Year of construction: 2022, Kaeser screw compressor SM 13 - 11 bar exhibition piece at a special price Volume flow at 11.0 bar (g) 1.07 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 9.63 kW Specific power 9.00 kW/(m³/min) Maximum overpressure 11.0 bar Drive motor efficiency at full load 91.7% Drive motor efficiency class IE4 Nominal drive motor power 7.5 kW Drive motor speed 2955 rpm Gedpfjvk R A Ssx Actoiw Drive motor protection class IP 55 Electrical supply 400 V / 3 Ph / 50 Hz Compressed air outlet temperature above ambient temperature (at +20°C, 30% relative humidity) 8 K Sound pressure level 65 dB(A Compressed air connection G 3/4 Location: From stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2024, Effective delivery rate approx. 1050 l/min Maximum pressure 10 bar Tank capacity 270 l Air outlet ½" Sales unit 1 Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1540 mm Weight approx. 295 kg Electrical data Power consumption of electric motor 7.5 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Noise emission Gsdpfxsfh Hahe Actsiw Sound pressure level Lp 62 dB(A) Explanation of sound pressure level: Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Motor(s) Motor type Electric Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2022, Kaeser screw compressor SK 22 - 11 bar - exhibition piece - Volume flow at 11.0 bar (g) 1.67 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 13.7 kW Max. overpressure 11.00 bar Drive motor efficiency at full load 91.2% Drive motor efficiency class IE3 Drive motor rated power 11.0 kW Drive motor speed 2960 rpm Drive motor protection class IP 55 Electrical supply 400V / 3 / 50Hz Compressed air outlet temp. above ambient temperature (at +20°C, 30% relative humidity) 6 K Sound pressure level 66 dB(A) Max. usable warm air volume 2500 m³/h Compressed air connection G 1 Cooling oil capacity 7.0 l Cooling oil type compressor SIGMA FLUID MOL Dimensions (W x D x H) 750 mm x 895 mm x 1260 mm Giedpfx Aevk R Dcjctow Weight 312 kg Location: from stock 54634 Bitburg - available immediately -

Year of construction: 2010, condition: excellent (used), Kaeser SM 9 – 11 bar screw compressor Manufacturer: Kaeser Type: SM 9 Machine type: Oil-injected screw compressor Year of manufacture: 2010 Condition: Used screw compressor, ready for operation Max. operating pressure: 11.0 bar Delivery rate: 0.75 m³/min Motor rated power: 5.5 kW Gsdpfxjhy Tzyo Actjiw Compressed air connection: G 3/4 Electrical connection: 400V / 3Ph / 50Hz Dimensions W x D x H: approx. 630mm x 800 mm x 900 mm Sound pressure level: 64 dB(A) Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Giodpfevmivcsx Actow Machine is being sold as defective Without guarantee - without warranty -