Used Index Abc 52 for sale (4,958)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 75,685 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 85 mm, travel distance Z-axis: 280 mm, spindle motor power: 20,000 W, number of axes: 7, This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Spindle hours: • S1 – 18914h • S2 – 661h • S3 – 3h • S4 – 29211h • S5 – 2413h • S7 – 1250h • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A Kdjdpfx Ajy Sg Daepdon • Hydraulic hollow clamping cylinder D65 Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2007, Siemens C 200 – 4D control Turning diameter: 100 mm Turning length: 280 mm Kodpfoy U Hfpjx Apdsdn 8-position turret with driven tools 6-position turret with driven tools Spindle speed: 6000 rpm Max. bar capacity: 60 mm Rear drilling unit for 5 stations Knoll chip conveyor Coolant system

Condition: excellent (used), INDEX ABC 65 is an INDEX CNC Turning‑Milling‑Drilling Center designed for high precision, accuracy and reliability. Capacity: 2 turning spindles, 2 turrets; spindle bore 65 mm; spindle diameters 140/110 mm; travels Z300 X140 Y100 mm; turret positions 10/9 (back 8). Specs: main spindle stepless 0–6000 rpm, 25/35 kW, torque 80/120 Nm; back spindle 6000 rpm, 5/9 kW; driven tools 7.5/9 kW; tool shank 45 mm; indexing 0.4 s; rapids X30/Z50 m/min; power supply 3x400 V 50 Hz; installed power 41 kW; weight ~6500 kg; dims 3600×1280×1950 mm. Accessories: 300 l coolant, 80 bar high‑pressure, paper filter, lamp, collet device, USB, parts conveyor, chip conveyor, toolholder set. Achieves tight tolerances; ideal for automotive, watchmaking, aerospace, medical and toolmaking. Kdodpfxsy S Dfue Apden

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 190 mm, travel distance Z-axis: 350 mm, overall weight: 2,100 kg, number of axes: 2, This 2-axis Index ABC 63 was manufactured in 1999. It has a rated power of 13 kW and a machine weight of approximately 2100 kg. If you are looking to get high-quality turning capabilities, consider the Index ABC 63 horizontal turning machine we have for sale. Contact us for further details. • Mains voltage: 400 V • Control voltage: 24 V • Frequency: 50 Hz • Rated power: 13 kWThe Axis travels are approximetaly Technical Specification Counter Spindle No Kedpfey Iwrmsx Apdedn Driven Tools No

Condition: excellent (used), Year of construction: 2000, INDEX ABC 60 Spindle automatic CNC operational, fully functional Year: 2000 Condition: very good, operational Ready for immediate delivery Machinery runs without any problems. Technical details: 1-Spindle Automatic CNC Fized Headstock Lathe Serial number 400290 control SIEMENS 840 C passage: 65 m tool turrets with driven tools: 2 front and rear side machining chip conveyor: KS SRF 040.00 Bar loading: SCHMID LN 3200 Weight machine: 3500 kg. Kdsdpsy Nycdofx Apdjn Overall size: 6500 x 1500 x 1800 mm. We are waiting for you in H.B.R. srl - ITALY

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 6 - Number of turrets : 3 MAIN SPINDLE - Spindle power : 29 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 65 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 4.2 [kW] - Spindle speeds : 4500 [rpm] - C axis indexing precision : 0.001 [°] - Travel : 280 [mm] UPPER LEFT TURRET - Number of positions : 5 - Tool type : VDI25 UPPER RIGHT TURRET - Number of positions : 8 - Number of motorized positions : 8 - X/Z stroke : 90/280 [mm] - Tool type : VDI25 - Live tools speed : 4500 [rpm] - Live tools power : 4.2 [kW] LOWER LEFT TURRET - Number of positions : 6 - X/Z stroke : 81/80 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 35 [kW] EQUIPMENT Ksdpfeuhac Dex Apdodn - CNC : INDEX C200-4 - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Collet chuck

Condition: good (used), Year of construction: 1997, functionality: fully functional, Siemens control system, Kdjdezcxk Espfx Apdsn spindle bore 65 mm, two turrets, live tooling spindle, Hainbuch collet chuck, MBL bar loader laser, chip conveyor.

Condition: good (used), Year of construction: 2006, INDEX MS52C CNC Multi-Spindle Mfd. 2006 Control: Siemens 840D 6 Spindles 52mm Capacity Equipped as pictured Under power Knoll System Ksdpfet Rkzwex Apdsdn Chip Conveyor Riedel Chiller 3.6 meter (12ft) IEMCA SIR Bar Feed SIR MS52/F Type 38 XL Mfd. 2005

Condition: good (used), Year of construction: 2004, machine/vehicle number: 2420701, CNC multi-spindle automatic lathe, make Index, type MS52C2-1, year 2004, serial no. 160024, - robot cell, - 7 clamping devices, - 3 rigid tool holders simple, - 3 rigid tool holder multiple, - 4 powered tool holders, - Suction Büchel Handlings and assembly robot cell Stäubli Unimation incl. basket translator with basket stack for raw and finished parts, two shuttles on top of each other for supply/removal baskets, Integrated measuring station Commissioning 2021 Connected load 24 kW, control, make Index, type C200-4D (Siemens 840 D basis), - 2 steering positions, - 6 spindles, - travel X/Y 300 x 500 mm, - bar diameter max. 52 mm, - Kdsdpolmkucsfx Apden - spindle speed max. 5000 rpm, -12 tool carriers, coolant system, - Industrial robot, make Stäubli, - programming panel, - extraction device, - settling device, - Accesories

Condition: used, Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 150 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 6 pieces -Dimension: Ø 36 x 300 mm -Weight: 0.95 kg/piece Kedpjfbmbnsfx Apdedn

Condition: used, Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 300 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 425/45/H45 mm Kjdpjfbmbpefx Apdsdn -Weight: 1.7 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, compact cylinder -Manufacturer: Wabco Westinghouse, compact cylinders Kdedpofxbgfofx Apdjn -Stroke travel: 900 mm -Piston: Ø 80 mm -Piston rod: Ø 22 mm/M20x1.5 -Price: per piece -Quantity: 2 pieces -Dimensions: 1165/95/H95 mm -Weight: 15.2 kg/piece

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Spindle Speed at main and counter spindle: 5,000 RPM Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Leakage oil volume at operating pressure 100 bar: max. 3 l/min Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Electrical data Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Kodpfezdqdfsx Apdodn Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Weight: approx. 11,000 kg EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.

Condition: used, Year of construction: 2013, turning diameter 110 mm Kodpfx Aoyuzfvjpdedn turning length 450 mm control Siemens weight of the machine ca. 9000 kg

Condition: good (used), Year of construction: 2006, Number of working spindles: 6 pieces Bar spindle diameter capacity: 32 mm Working spindle maximum speed: 6000 rpm Spindle chuck diameter: 40 mm Maximum number of tool carriers: 12 pieces Tool carrier travel distances: X = 72 mm, Z = 100 mm Part catcher receiver available in 6.1 position KNOLL chip conveyor In-machine air intake filtration system available (ventilation) Weight: 7,200 kg Magazine: IEMCA 3300 mm capacity bar feeder Kdsdsrqzzpopfx Apden

Condition: used, Year of construction: 2005, In the configuration 1.2-2.1 axes are X-fix Z-NC and all other axes are NC controlled Kdedpfxeld Npye Apdjn Double NCU It has Büschel, Çiller and Knoll units. High pressures 40 Bar SIR25 IEMCA driver available It is in working condition, our workbench can be seen in our Bursa Gemlik factory.

Condition: used, Year of construction: 2014, INDEX C200 CNC Lathe 3 Turrets 2 spindles Fanuc Control: 31i-Model B Axial Motorized Switches: 6 pcs Radial Motorized Switches: 13 pcs Tool Holders: 11 pcs Boring Bar Holders: 21 pcs Pin: 1 pcs Loader Bushings + Sleeves: Ø51/Ø46/Ø41 New MBL loader bushings: 2 sets 2 optical scales overhauled by HEIDENHAIN 1 Balluff Socket Gantry Arms Box with various sensors and proximity switches and cables Motorized Belts: 6 pcs Set of anti-vibration bushings for MBL loaders Start-up time: Kdsdexxm Hfopfx Apden On time: 37946 Hydraulic hours: 37,500 Production time: 26,500 With MBL Bar Feed

Condition: used, Year of construction: 2001, functionality: fully functional, bar diameter (max.): 32 mm, INDEX MS32P CNC Multi-Spindle Kjdpfx Apoy Ruu Dedsdn Mfd. 2001 SN: 150127 Bar Feed: IEMCA SIR-MS32/33/P (3 Meters) Control: Siemens 840D Integrated Knoll Chip Conveyor External Knoll High-Pressure Filtration Unit 6 Spindles 32mm Capacity 1 Synchron High-Performance 6+1 Configuration Back-Working Capability: Equipped with a Swiveling Synchronous Spindle for simultaneous rear-end machining. Complete Part Processing: Characterized by the ability to perform drilling, tapping, and milling on the cutoff face while the next part is being machined in the main spindles, enabling dropped-complete part production. The "P" Quill Advantage: The "P" model uses hydrostatic quills (Z-axis).

Condition: good (used), Tool package 23 pieces various driven and rigid tool holders VDI 30 Kodeiludzopfx Apdjdn were mounted on Index C 200

Condition: used, Year of construction: 2015, Technical details: number of spindles: 6 spindle passage: 22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. No socket for powered tools! Kdodpfx Asxc Idmspden *

Condition: excellent (used), Year of construction: 2009, operating hours: 28,742 h, functionality: fully functional, bar passage: 65 mm, FANUC Series 31i-Model A 3 turrets Parts conveyor Kdedpfx Aeydmbuopdjn Magazine Further details on request

Condition: used, Year of construction: 2007, functionality: fully functional, 6-spindle Hainbuch Spanntop Axfix D22 ARTIS integrated process monitoring system Slide units - Slide unit 1.1: X-axis fixed, Z-axis NC-controlled - Slide unit 2.1: X-axis fixed, Z-axis NC-controlled - Slide unit 1.2: X-axis and Z-axis NC-controlled - Slide unit 2.2: X-axis and Z-axis NC-controlled - Slide unit 3.1: X-axis and Z-axis NC-controlled - Slide unit 3.2: X-axis and Z-axis NC-controlled - Slide unit 4.1: X-axis and Z-axis NC-controlled - Slide unit 4.2: X-axis and Z-axis NC-controlled - Slide unit 5.1: X-axis and Z-axis NC-controlled - Slide unit 5.2: X-axis and Z-axis NC-controlled - Slide unit 6.1: swiveling axis and Z-axis NC-controlled - Slide unit 6.2: X-axis and Z-axis NC-controlled Kedpfx Apsyymbzjdjdn Synchronization device, position 6.1 Part discharge via chute Workpiece conveyor belt at spindle position 6 High-pressure pump Fire extinguishing system Coolant cleaning system Hinged belt chip conveyor Flat loading magazine: IEMCA SIR MS 22/33 P

Condition: good (used), Year of construction: 2013, functionality: fully functional, Siemens control system, 14-position turret, tool holder VDI30, powered tools, Kjdpfx Ajzcxi Iepdedn spindle bore 65mm, bar feed MBF, chip conveyor. The machine was completely overhauled in 2013.

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 7,000 rpm, travel distance X-axis: 70 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 250 mm, spindle motor power: 22,000 W, controller manufacturer: INDEX, controller model: C200-4D Control, number of axes: 9, This 9-axis Index C100 was manufactured in 2012. It features a robust cast iron machine frame and a powerful main spindle with a maximum speed of 7000 rpm and a bar diameter of 42 mm. The machine includes three turrets with live tools, offering versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the Index C100 horizontal turning machine we have for sale. Contact us for further details regarding this machine. Kodpfx Apozcykgjdsdn - Machine Frame: Cast iron machine frame in vertical bed design- Tool Carrier Guides: Plate guides with high level of rigidity and dampening- Axis Drives: Double-scissor kinematics for tool carriers; AC synchronous drive technology- Headstock Design: Thermo-symmetrical design- Main Spindle (D42): Spindle head size 5 (DIN 55026 and ISO 702), max. bar diameter 42 mm, max. speed 7000 rpm, front bearing diameter 75 mm- Main Spindle Power: 22/29 kW (at 100%/40% duty cycle)- Main Spindle Torque: 50/65 Nm (at 100%/40% max.)- Main Spindle Clamping Cylinder: Hollow clamping cylinder D42/14 for collet or chuck clamping, hydraulic operation, stroke 12 mm, clamping pressure 8/80 bar, max. thrust 34 kN, max. pull 34 kN- C-Axis Drive (Main & Counter Spindle): Hollow shaft motor, angular gauging system on spindle, resolution 0.00014 degrees, repeatability scatter Psmax = 0.01 degrees- Main Spindle Clamping Unit: Single pressure clamping unit, adjustable from 8 to 75 bar- Counter Spindle (D42): Spindle head size 5 (DIN 55026 and ISO 702), max. bar diameter 42 mm, max. speed 7000 rpm, collet chuck diameter 110 mm, front bearing diameter 75 mm- Counter Spindle Power: 16.5/19 kW (at 100%/40% duty cycle)- Counter Spindle Torque: 32/43 Nm (at 100%/40% max.)- Counter Spindle Slides (Z-axis): AC motor and ball screws drive, working travel 500 mm, rapid traverse 60 m/min, acceleration 10 m/s^2, feed thrust 3000 N- Counter Spindle Clamping Cylinder: Hollow clamping cylinder D42/14, hydraulic operation, stroke 12 mm, clamping pressure 8/80 bar, max. thrust 34 kN, max. pull 34 kN- Counter Spindle Clamping Device: Single pressure clamping device, adjustable from 8 to 75 bar- Tool Carrier 1: X-axis travel 70 mm (rapid 30 m/min, acc. 9 m/s^2, feed force 3000 N); Z-axis travel 250 mm (rapid 60 m/min, acc. 9 m/s^2, feed force 3000 N); Y-axis travel 70 mm (rapid 15 m/min, acc. 5 m/s^2, feed force 3000 N). Turret 1 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max. speed 8000 rpm)- Tool Carrier 2: X-axis travel 70 mm (rapid 30 m/min, acc. 9 m/s^2, feed force 3000 N); Z-axis travel 400 mm (rapid 60 m/min, acc. 9 m/s^2, feed force 3000 N); Y-axis travel 70 mm (rapid 15 m/min, acc. 5 m/s^2, feed force 3000 N). Turret 2 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max. speed 8000 rpm)- Tool Carrier 3: X-axis travel 125 mm (rapid 30 m/min, acc. 10 m/s^2, feed force 3000 N). Turret 3 with 10 stations, parallel shank mountings D25x48 (DIN 69880), live tools on all stations (Power 4.2 kW, Torque 11 Nm, max.

Year of construction: 2020, operating hours: 10 h, condition: like new (used), functionality: fully functional, Automatic line for rinsing, filling, pasteurizing, drying and packaging of glass juice bottles consisting of following modules: 1. SEMI AUTOMATIC DEPALLETIZER (model: Depal 512 – mini) for unpacking glass bottles from pallets, 1 operator required to put the pallet into the machine and remove the cardboard that is inserted in between the glass bottle layers 2. UNIVERSAL RINSING MACHINE (model: IND-Wash 56 S2) for steam sanitizing and hot water rinsing of the bottles before filling Kodpfx Apszdr Ilsdsdn 3. ROTARY FILLING MACHINE (model: IND-Dose 46 PO-12) for filling of the hot product into the glass cylinder shape bottles 4. CLOSING MACHINE FOR TWIST OFF CAPS (model: IND-Close 12E) for vacuum closing of the filled bottles using steam injection induced vacuum system 5. PASTEURIZATION AND COOLING TUNEL (model: PT 42-9) for further continuous pasteurization of the product 6. VACUUM TESTING MACHINE (model: IND-Test 61) for selection and eviction of the improperly closed bottles 7. DRYING MACHINE (model: IND-Blow 86) for drying the residual moisture on the battle surface before applying labels 8. LINEAR LABELLING MACHINE FOR APPLICATION OF SELF-ADHESIVE LABELS (model: IND-Lab 32B) with top (over the cap) and side application of the labels on cylindrical bottles 9. AUTOMATIC GROUPING AND SHRINK-WRAPPING MACHINE WITH TRAY AND FILM (model: IND-pack 29 T) for packing the bottles onto cardboard trays in various configurations per different bottle sizes 10. SET OF FLAT TOP CHAIN CONVEYORS (model: IND-Trans 71) connecting the various modules of the line (conveyors between rinsing, filling and closing sections with top covers)