Used Ingersoll Gantry Eagle 800 for sale (8,977)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Excellent condition, low operating hours (1540 hours of erosion time) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual erosion with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump max. 18,000 mm/min Travel ranges (X, Y, Z) 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Dwsdpfx Adjzkftborsa Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system Cooling unit

Condition: used, Year of construction: 2008, functionality: fully functional, 1. Wire EDM machine, OPS INGERSOLL Gantry Eagle 800, with IMC5 handling system, year of manufacture 2008. In very good condition and in operation until December 2025. Now dismantled. Includes 1 cooling unit, M.T.A TAE EVO M10 (year of manufacture 2012). 1 fire extinguishing system, Kraft & Bauer FB703. Weight approx. 6,700 kg. Available for sale at a favorable price. Dwedpfoy Ifu Nox Adrsa Price significantly reduced!

Condition: excellent (used), Year of construction: 2011, operating hours: 1,703 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, tank capacity: 800 l, OPS INGERSOLL Gantry Eagle 800 year of manufacture: 2011 travel: x, y, z 550 x 850 x 450 mm control: Eagle Power Tec electrode changer: 20 pieces 3D probe 3D probe on the table magnet: 400 x 200 mm C-axis EROWA clamping system fire extinguishing system remote control Dsdpfxszgt Rms Adrjwa chiller includes approximately 600/700 liters of dielectric fluid includes drawer cabinet with contents documentation machine is powered on for inspection

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Excellent condition, low hours EAGLE Powertec PC/NC Control 3060 22" touchscreen display MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional remote control Manual EDM operations with Powertec Handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High Speed Jump: max. 18,000 mm / min. Travel (X, Y, Z): 550 x 850 x 450 mm Linear measuring system on all axes Distance table / electrode chuck: min. 135 mm / max. 585 mm 20-position electrode changer with pick-up rotary magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Worktable (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Headload: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filtration system Accessories: Dwsdoyzxd Dopfx Adroa Erowa, type UPC Production Chuck CO2 fire extinguishing system Recooling unit

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 575650, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, TECHNICAL DETAILS Design: Lift tank Internal dimensions (W x D x H): 800 x 1100 x 480 mm Dielectric height programmable/automatic: max. 450 mm WORKING HEAD On ram clamping system UPC/H8000/Dynafix: 150 kg Min. distance electrode clamping system to worktable: 135 mm Max. distance electrode clamping system to worktable: 585 mm INTEGRATED C-AXIS Adjustable rotation speed: 1 - 20 rpm Measuring resolution: 0.001 degrees Load capacity with manual electrode change: 50 kg Load capacity with automatic electrode change: 15 kg Holding torque/clamping force: 120 Nm Max. moment of inertia of electrode: 0.4 kgm² WORKTABLE Support surface (W x D): 760 x 1000 mm Load capacity: 2,000 kg TRAVEL PATHS X / Y / Z (inside work tank): 550 x 850 x 450 mm Y (for electrode change and loading position): 1180 mm CONTROL PC-NC dialog: 2 x 32 bit Drive type: digital AC servo motors Max. travel speed X, Y, Z: 5,000 mm/min High speed jump max.: 18,000 mm/min Dedpfew T Thmsx Adrjwa MACHINE DETAILS Main voltage: 400 V / 50 Hz Control voltage: 24 VDC Maximum fuse: 32 A Power consumption: 19 kVA Machine weight: 6,400 kg Main dimensions (W x H x D) including generator: 2760 x 2730 x 2940 mm Footprint with generator: 9 m² Generator weight: 640 kg Operating hours: 3,221 h

Condition: excellent (used), Year of construction: 2011, Control PC-NC Dialog Travel paths X/Y/Z: 1000/1510/700 mm C-axis 30-way electrode changer Hirschmann clamping system Support surface WxD 1140/1640 mm Load capacity 7500 kg Filter system Fire extinguishing system Dedpfx Aozfx S Hedrjwa

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, OPS Ingersoll Gantry Eagle 500 die-sinking EDM machine in very good condition. 3R clamping system Djdpfex Htfyex Adrowa Year of manufacture: 2017. Inspection under power possible.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. Dedpeyzw I Iofx Adrswa The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, controller model: CNC MITSUBISHI 32bit, TECHNICAL DETAILS Travel X-axis: 550 mm Travel Y-axis: 850 mm Travel Z-axis: 450 mm Y-axis travel for electrode change and loading position: 1,180 mm Integrated C-axis head, adjustable rotation speed: 10/20 rpm Integrated C-axis head, measurement resolution: 0.001 mm Table dimensions: 850 x 550 mm Load capacity without changer: 50 kg Load capacity with changer: 10 kg Minimum head weight: 200 kg Distance from tool carrier plate to worktable max.: 585 mm Distance from tool carrier plate to worktable min.: 125 mm MACHINE DETAILS Control: CNC MITSUBISHI 32bit Tank dimensions (W x D x H): 800 x 1,100 x 480 mm Dielectric height programmable/automatic: 440 mm Filter cartridge type: Integrated cartridges Dwjdpfjywguvsx Adrsa Electrode changer system / pick-up disc magazine slots: 20 Electrode weight / single electrode: 15 kg Total changer weight: 60 kg Generator FP70: ampere multipulse Electrode changer: 20-position pick-up linear changer Current: 70 A Dimensions & Weight Space requirement: approx. 2.4 x 2.65 x 2.68 m Machine weight: approx. 6,000 kg EQUIPMENT Electric hand-held control unit CO2 fire extinguishing system integrated / Dielectric cartridge filter system

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition Dsdpfx Adeyrqpferewa The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 750 mm, table length: 650 mm, TECHNICAL DETAILS Version: Lifting Tank Internal dimensions (W x D x H): 770 x 670 x 440 mm Programmable/automatic dielectric fluid height: max. 395 mm Work Table Support surface (W x D): 750 x 650 mm Dedpfxew T Tg No Adrswa Load capacity: 1,000 kg Travel Paths X / Y / Z (within working tank): 525 x 400 x 450 mm Y (for electrode change and loading position): 675 mm Control System PC-NC dialogue: 2 x 32 bit Drive type: digital AC servo motors Max. traverse speed X, Y, Z: 5,000 mm/min High speed jump max.: 18,000 mm/min Min. distance between electrode clamping system and work table: 135 mm Max. distance between electrode clamping system and work table: 585 mm C-Axis Adjustable rotation speed: 1-20 rpm Measuring resolution: 0.001 degrees Load capacity for manual electrode change: 50 kg Load capacity for automatic electrode change: 15 kg Holding torque/clamping: Yes Max. electrode moment of inertia: 0.4 kgm² MACHINE DETAILS Dimensions (W x H x D) with generator: 2600 x 2680 x 2290 mm Space requirement with generator: 7.3 m² Machine weight: 4,360 kg Generator weight: 640 kg Connected load: 16 kVA Fuse protection: 32 A Supply voltage/frequency: 400 V / 50 Hz Operating hours: 2,001 h

Condition: good (used), Year of construction: 2005, Serial no. 571752, 4 machining axes, travel ranges X/Y/Z 2,050 x 1,050 x 1,000 mm, table size 2,400 x 1,500 mm, table load 10,000 kg, machine bed mounted in a pit, with T-slot clamping surface, electrode changing system type EW15 Linear, dielectric fluid system with cartridge filter system, Ingersoll control system type Multipulse 64, extinguishing system. Dedezq Dl Aspfx Adrswa

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control system: Mitsubishi - 64-bit CNC Generator power: 70 Amps - multipulse Dwjdpfx Ajzgckvedrsa Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-position pick-up disc changer Working tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) The OPS INGERSOLL wire erosion machine GANTRY 1200 HSJ / 64-bit, manufactured in 2006, has undergone a comprehensive and professional overhaul in our facility and is in very good technical and visual condition. During the overhaul, the machine was disassembled to over 70%. All relevant wear parts were carefully inspected. The following overhaul work was carried out on the machine mentioned above: Replacement of the ball screw drive and ball bearings of the X, Y and Z axes. Replacement of all (4) ball screw drives of the tank drive. Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to the OPS INGERSOLL protocol. Thorough cleaning of the entire machine base. Cleaning of the entire working tank including replacement of the felt wipers. Complete repainting of the machine. Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator and the control system. Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. The machine is immediately ready for use and is ideally suited for reliable production operation.

Year of construction: 2003, condition: good (used), EDM machine Machine type: OPS Ingersoll Gantry 5000 Dsdpfx Aezi Sfuedrjwa Year: 2003 SPECIFICATIONS Travel

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, For sale are spare parts from a 3-axis CNC machining center of the brand Ingersoll, model OPS 800. Ideally suited for the production of graphite electrodes thanks to its high-speed spindle. The machine has been disassembled, and individual components such as the controller, extraction system, spindle, and control panel are available for sale. Please let us know which parts you require, and we will provide you with a tailored offer. Technical Data: Year of manufacture: 2004 X-axis travel: 800 mm Y-axis travel: 700 mm Dedpfx Adeuu Rthjrjwa Z-axis travel: 500 mm Control system: ANDRON Spindle speed: 42,000 rpm Tool changer: 36 positions Tool holder: HSK 63 Included: - Graphite dust extraction system - Chip trays - Cooling system Tooling not included. Transport and loading can be organized throughout Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 650 mm, For sale are 2 OPS Ingersoll EDM machines, model Gentry Eagle 500. The machines are being sold from a production facility, are in very good condition, and fully functional. Technical data: Year of manufacture: 2009 Operating hours: approx. 30,758 Available from: By arrangement Travel paths: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm with Erowa) C-axis: controlled (0.001 mm resolution) Electrode holder (quill): Erowa ITS Work tank: 770 mm x 670 mm x 440 mm Table: 750 mm x 650 mm Accuracy: 0.005 mm to 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Equipment: - Filter system with 16m² paper candle - Compressor Dodjxrpm Uepfx Adrswa - Recooling unit - Liftable tank with automatic tank refilling (ATA) - CO2 fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Footprint: 3,135 x 3,944 x 2,871 mm Options: - Pallet holder for four Power-Grip160 (not included in price) - Various 4-fold aluminum exchange pallets with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organized Europe-wide at an additional cost upon request. Prices plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options please visit our website.

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Dwodpjxpvhaefx Adrja Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 650 mm, workpiece weight (max.): 7,500 kg, total height: 3,900 mm, total width: 2,950 mm, total length: 3,430 mm, Equipment: documentation/manual, For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. Dwodpfxsvwa Nbe Adrja The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered. For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered.

Condition: used, Radial drilling machine with table WEBO type HRH 100 / 3000 Machine No. 10009555/7 -- 1110185 -- 6046 -- Year of manufacture 1979 Drilling capacity: Ø 100 mm in ST 60 at a feed rate of 0.5 mm/rev. Nominal overhang: 3000 mm Maximum overhang: max. 3100 mm Spindle mount: MK 6 Spindle speed: 22.4 - 1600 rpm, 36 steps Feed rate: 0.05 - 2.5 mm/rev, 18 steps Distance spindle - baseplate: 970 - 2335 mm Quill stroke: 325 mm Swivel range of the arm: 360° Traverseable on bed, bed length: 7500 mm Dwsdpfxofbt Huo Adrsa Clamping area of the table: 8000 x 2100 mm - Electric central clamping device - Drilling unit on the machine bed, traversable lengthwise by electric motor - Table consisting of 2 clamping plates with 7 x T-slot, (length 4000 x width 2100 x plate thickness 360 mm) Space requirement L x W x H: 8000 x 4550 x 4300 mm Maximum height: 4300 mm Transport height (bed with drilling machine): approx. 3150 mm Transport weight (bed with drilling machine): approx. 20 tons Transport dimensions table: L x W x H 4000 x 2100 x 900 mm (2 plates stacked on top of each other) Transport weight table: approx. 14 tons Good condition

Condition: new, Catalog number: S0367 TECHNICAL DATA dimensions of the work table: 800x800mm motor power S1/S6: 3.0 / 4.4kW diameter of the hole in the table: 190mm spindle diameter: 30mm spindle tilt: 0° -45° spindle speed: 1400 / 3500 / 6000 / 8000rpm rotation: right, left vertical spindle travel: 175mm working height of the spindle: 125mm max. tool diameter for profiling / for tenon machining: 180/250mm diameter of the extraction nozzle: 120mm dimensions L/W/H: 2800x1800x1090mm Djdpfxozh Ii Ts Adrswa weight: 410kg – machine is new – tilting spindle – with side table Net price: 17200 PLN Net price: 4100 EUR, depending on an exchange rate of 4.2 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Dwedpjzph N Aofx Adroa Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: good (used), Year of construction: 2014, Manufacturer: DEMAG Load capacity: 860 kg + 630 kg (equipped with two cranes) Exact technical dimensions are shown in the pictures. Dsdpfxsyu R Dzs Adrswa The crane runway can be extended using the structures and supports shown in the pictures; however, additional track elements are required for the extension, which are not available!!

Condition: used, Year of construction: 2009, total height: 2,800 mm, total length: 3,500 mm, total width: 1,800 mm, Empty weight: 13.000 kg - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 675002 - Drive system: CNC - Number of axes [pcs]: 3 - X-axis travel [mm]: 650 - Y-axis travel [mm]: 1100 - Z-axis travel [mm]: 500 Dodpfx Aszry E Isdrswa - C-axis rotation [°]: 360 - Options: Chip conveyor, Tool magazine, Probe - └ Tool magazine [pcs.]: 32 - Transport dimensions: 3500mm x 1800mm x 2800mm (l x w x h) - Transport weight [kg]: 13000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances Travel distance X-axis: 650 mm Travel distance Y-axis: 550 mm Travel distance Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Dodszquqcjpfx Adrjwa Spindle interface: HSK-E 40 Spindle speed: 42,000 rpm Spindle running time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. EUR 40,000 Tool magazine Number of tool slots: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Machine type: CNC machining center Manufacturer: OPS INGERSOLL Model: SPEED HAWK 650 Year of construction: 2016 Electrical connection data Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT Technical documentation Manual HSK-E 40 tool holders 3 pallets

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Max. workpiece weight: 2,000 kg Distance spindle center – table: 550 mm Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Dwjdpfxezqupxs Adrja Tool Changer Tool magazine positions: 40 MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Electrical Connection Data Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Spindle operating time: 11,297 h 20 min 11 s EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm External Reference: Demo - Lot 2