Used Klinger Flaschenwaschsysteme Business Class 14/1/453 for sale (84,355)

Condition: used, Offered for sale is an industrial bottle washing machine with a multi-stage cleaning system. Rated capacity: 2000bottles/h. Bottle volume: 0.2-1.0liters. Bottle diameter: 58-88mm. Bottle height: 140-330mm. Total bottle rows: 61. Bottles in the machine: 770 units. Cycle time: 19.3846sec. Total transit time: 19.71min. Caustic contact time: 11.95min. Max. water consumption: 1.0m³/h. Equipped with bottle infeed and discharge, weak caustic bath, multi-stage spray systems for caustic solution, hot, warm and fresh water, and label discharge. Empty weight: approx. 6500kg. Overall dimensions X/Y/Z: approx. 5050mm/3139mm/2450mm. Height including spindles: 2600mm. Inspection possible by arrangement. Lsdpfx Ake Ad Nqhomohn

Year of construction: 2000, condition: ready for operation (used), A complete bottle rinsing system with Klinger bottle rinsing machine, Hager + Elsässer drinking water treatment system and Ro reverse osmosis system is available. 1) Bottle washer Klinger Euro Class-D 20/1/73, year of construction: 2000, capacity: 9600 bottles/h, cycle time: 7.5s, cycle time: 12.63min, bottles per row: 20, number of rows: 107, max. bottles in the machine: 2020, water consumption: 3.8m³/h, tank volume soft caustic/post-caustic: 5600l/740l. Dimensions X/Y/Z: approx. 8000mm/3400mm/2800mm, weight: approx. 16000kg, control system: Siemens S7. 2) Drinking water treatment plant Hager +Elsässer consisting of cation and anion exchanger, capacity: 5m³/h. Including salt tank, pre-filter and UV sonde. 3) RO reverse osmosis system, full desalination capacity: 2.5m³/h. Documentation available. On-site inspection is possible. Lsdpfxotwqzle Akmohn

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: AB00022616, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 901 kg, SCM Class TI 145ep shaper in CE version, manufactured in 2022. Equipped with the READY 3 UP system, featuring a shaper fence with mechanical programming, a FAST sectional table with manual adjustment, and a support for the feeder with manual vertical and horizontal movements. Interchangeable shaper arbor with MK 5 coupling, tool holder cone MK 5 with adapter and clamp (right), and a T-SET rapid tool clamping system. LL version with 2 cast iron table extensions for profiling. Lhedsz Nggrjpfx Akmen

Year of construction: 2010, condition: used, functionality: fully functional, We are offering this used AWETA GS DV-D 14+1 sorting machine for cucumbers (or zucchini), manufactured in 2010. Machine type: GS DV-D 14+1 Serial number: 60795-01 Year of manufacture: 2010 Description: The system sorts approximately 18,000 cucumbers per hour. Optionally, automatic emptying of the crates, including the removal of the full crates, is also available. Lsdpfezu H Uhox Akmjhn Not included in the sale: Palletizing and strapping machine. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital display, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant!! Technical specifications: Year of manufacture: 2006 Model: EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Lhsdpfxjxyvaqs Akmen Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe for the highest demands: with stepless speed control, constant cutting speed and an impressive 7.5 kW drive power (40% duty cycle). This compact machine with outstanding performance is ideal wherever maximum precision is required in limited spaces, such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is an EMCO EMCOMAT 14 D lathe with Emco digital display, year of manufacture 2006. This lathe is in excellent original condition and comes from a facility where it was only used occasionally for special applications. The control system is very user-friendly. The guideways are lubricated regularly by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our premises. You will find more lathes from renowned manufacturers on our website.

Condition: used, Year of construction: 2023, Manufacturer: Ilapak Italia S.p.A. (IMA Group) Year: 2023 Type: Complete bagging line LINE-UP 1. Belt conveyor – Service PTNMSX 2. Z-type lift with cleats – Service PTNMSX-Z 3. 14-head combination weigher – Ilapak Weightronic WA 14/50 4. Vertical form-fill-seal (VFFS) bagging machine – Ilapak Vegatronic VT2000 OF P 5. Stainless steel platform (gantry) – FQS Maximum line dimensions: 4.81 x 3.00 x 7.35 m (H) (technical data sheet) Designed for use in cold/damp environments (deep-frozen products) 1. VEGATRONIC VT2000 OF P VERTICAL BAGGING MACHINE Vertical form-fill-seal (VFFS) bagging machine, Open Frame version Forming tube and neck Vertical longitudinal seal Horizontal cross-seal jaws with integrated cutting blade Film drive via belts Bag length controlled by encoder Maximum mechanical output: 70 bags/min Film reel: Max. Ø: 600 mm Width: 400 mm Lhedpfxe Ad Rv Ee Akmsn Core: Ø 76 mm Max. weight: 50 kg Current format: Ø 170 mm (can be changed on request) HMI touch-screen control 2. WEIGHTRONIC WA 14/50 MULTIHEAD WEIGHING MACHINE 14 heads – 1 pre-dosing basket + 1 weighing basket per head 15 load cells: 14 weighing baskets + 1 beneath the central cone Central distribution cone Electromagnetic radial vibrating channels, which can be dismantled without tools Ouverture des paniers par moteurs pas à pas – cames paramétrables Timing hopper Unloading via 4 removable chutes into the outlet hopper Maximum speed: 90 strokes per minute Bucket capacity: 5.0 l Volume maximal de vidange (par déversement) : 12,5 l Plage de poids de vidange (par déversement) : 100 g - 3 000 g Maximum length of parts: 150 mm Modes: weighing or piece counting, mixing of up to 4 batches, multiple discharge per bag Automatic tare and calibration Ilapak HMI touchscreen Control of up to 4 external feeders Contact parts that can be removed without tools and are numbered per head AXIS F1035-E surveillance camera above the weighing machine – real-time display on the HMI (augmented reality mode) 3. PRODUCT POWER SUPPLY ( SERVICE) PTNMSX belt conveyor: - AISI 304 stainless steel frame - Modular PP belt - Effective width: 533 mm - Effective length: 2405 mm - Loading/unloading height: 3080 mm - Speed: 22 m/min - SEW SA37 gear motor – 0.37 kW – IP65 - Power supply: 400 V three-phase – 50 Hz - Wash ramp with 10 nozzles PTNMSX-Z Z-lift: - AISI 304 stainless steel structure - Modular PP belt with cleats – pitch 203.2 mm - Effective width: 403 mm - Effective length: 5,300 mm - Loading height: 2,660 mm - Unloading height: 5,215 mm - Speed: 24 m/min - SEW SA47 gear motor – 0.75 kW - Power supply: 400 V three-phase – 50 Hz - Stainless steel loading hopper - Inspection hatches Conveyor control via the bagging machine control cabinet 4. FQS GANTRY PLATFORM Stainless steel tubular structure designed for washing Weighing machine support above the bagging machine Staircase with stringers and steps made of folded sheet metal Stainless steel handrails Bolted assembly (dismantlable) DOCUMENTATION AVAILABLE EC Declarations (production lines and machinery) Declarations of incorporation for conveyors User manuals (FR / IT) Risk assessments (FR) Electrical and pneumatic diagrams Illustrated parts lists (IPB) Recommended spare parts lists (RSPL) Food contact certificates Equipment dismantled and stored on Osertech's premises.

Condition: like new (used), functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 200 t, operating speed: 50 mm/s, table width: 1,300 mm, table length: 4,200 mm, ram plate width: 1,300 mm, ram plate length: 4,200 mm, distance table to ram: 300 mm, total length: 14,090 mm, total width: 2,600 mm, total height: 2,380 mm, overall weight: 13,000 kg, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, The QIULIN BY624×14/20 industrial hydraulic press is designed for pressing and gluing flat components, veneer pressing, and the production of furniture and door elements. It features a single-platen design with two heating plates. The heating is electric, using thermal oil, with separate temperature control for the upper and lower plates. TECHNICAL SPECIFICATIONS – CATALOG DATA: – Brand: QIULIN – Model: BY624×14/20 – Country of origin: China – Type: hot hydraulic press – Pressing force: 2000 kN, 200-ton class – Number of working platens: 1 – Number of heating plates: 2 – Length of working plates: 4200 mm Ledpfxoz Ix Aus Akmshn – Width of working plates: 1300 mm – Plate thickness: 52 mm – Maximum press opening: 300 mm – Unit pressure: 3.7 kgf/cm², approximately 0.36 MPa – Working temperature: from ambient temperature to 120°C – Total installed power: 79.35 kW – Plate closing speed: 50 mm/s – Heating: electric with thermal oil – Separate temperature adjustment for both plates – Automatic plate opening – Semi-automatic operation EQUIPMENT VISIBLE IN THE PHOTOS: – Robust frame construction – Hydraulic cylinder assembly – Hydraulic power unit – Separate control panel – Conveyor belt and table for material feeding and removal CATALOG DIMENSIONS OF THE UNIT: – Length: 14,090 mm – Width: 2600 mm – Height: 2380 mm – Weight: approximately 13,000 kg Used machine, as shown in the photos. Paid transport can be arranged. Please contact us for details. JBS Woodworking Machinery WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Year of construction: 2019, condition: like new (used), functionality: fully functional, DESI-14 Industrial Grinding & Micronization System Complete Industrial Production Line – Manufactured in 2019 A complete industrial grinding and micronization system manufactured in 2019 by Desintegraator Tootmise OÜ, Estonia. The system is designed for high-speed fine grinding of dry, powdery and granular materials to produce fine powders. Applications The DESI-14 is designed for fine grinding and micronization of a wide range of suitable materials, including mineral, synthetic, organic and biological materials. It is intended for industrial applications where particle-size reduction and fine powder production are required. Suitability and achievable fineness depend on the properties of the material and the operating conditions. The integrated production line includes material feeding, a high-speed impact disintegrator, cyclone separation, automatic air filtration, product conveying and big-bag discharge. Key Features & Technical Specifications Manufacturer: Desintegraator Tootmise OÜ, Estonia Lhodpfx Akjzy Nbhemjn Model: DESI-14 Year of manufacture: 2019 - Main drives: 2 × 30 kW electric motors - Maximum total installed power: 80 kW - Rotor speed: Approx. 2,965 rpm - Rotor configuration: Six-row design - Feed hopper capacity: 1.5 m³ - Power supply: 380 V, three-phase, 50 Hz - Cooling: Water-cooled disintegrator housing and cover - Two complete rotor sets included Documented Factory Test Performance According to the manufacturer's technical documentation, the system was tested with calcium carbonate (CaCO₃), achieving a throughput of 1,000 kg/h, with 92% of the final product below 30 μm. The test used feed material below 100 μm with 2% moisture. Actual performance depends on the material being processed, its characteristics and the required final fineness. Complete System Includes: - DESI-14 high-speed impact disintegrator - Feed hopper and WAM screw feeder - Two cyclone separators - Three rotary valves - Screw conveyors - WAMFLO automatic air filtration system - Exhaust fan - Big-bag discharge system - Electrical control panel and supporting structures - Installation dimensions: Approx. 6,000 × 5,200 × 4,000 mm - Total gross weight: Approx. 2,700 kg Condition: Used industrial equipment, manufactured in 2019. Current operational condition and maintenance history to be confirmed. Further technical information, photographs and inspection arrangements are available upon request. Machine Condition & Availability Condition: Excellent and fully operational Location: Zagreb, Croatia Availability: Immediately available

Condition: used, Year of construction: 2016, Equipment: all wheel drive, This machine has just arrived at our facility: Liebherr wheel loader L 526 Z 2 plus 1? In good condition? Excellent features? Looks like new!! Liebherr service maintained? Service history stored on the Liebherr central computer! All major services performed by Liebherr. VIN: VATZ1558PZB0444200 Year of manufacture: 2016 First put into service: 2017 Operating hours: Original 10,566 hours, verifiable! Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and charge air cooling, 136 hp, emission stage TIR IV (Note: Brochure = TIR V!!!) Hydrostatic drive with 3 driving ranges, driving speeds: Range 1: 0 - 6.0 km/h, Range A1-2: 0 - 16.0 km/h, Range A1-3: 0 - 20.0 (40) km/h (currently limited to 20 km/h!) * Standard Z-linkage * Quick coupler with hydraulic attachment kit, 3rd hydraulic circuit for tipping/grabbing/or 4/1 bucket with multi-quick coupler, towing hitch at the rear, ride vibration damper, linkage vibration damper, automatic central lubrication system - factory installed by Liebherr, air conditioning, automatic climate control - automatically maintains temperature, step for easier cleaning of the windshield, steel lamp mounts instead of plastic, folding and heated exterior mirrors, tilting window on the left/driver's door, premium display with touchscreen, driver's seat "Comfort" with pneumatic suspension, seat heating and headrest, Comfort radio with hands-free system, 2 work spotlights on the cab roof at the rear (LED), 2 work spotlights on the cab roof at the front (LED), fuel filter with pre-filter, air intake with pre-separator - TopAir, reversing fan for blowing out the radiator, interior mirror, adjustable steering column, pre-installation for rotating beacon - flashing light, folding upper section of the cab in the center, rear view monitoring with camera - monitor in the display, crane/tie-down eyes at the rear and front, protective ventilation system. Tires 17.5 x 25 L3, front: 2 x 60% Tires 17.5 x 25 L3, rear: 2 x 60% Offer with quick coupler and bucket - at a price of €62,900.00 net. Additional equipment available at an extra cost: * Tipping bucket from 2.5 to 4 cubic meters from €4,950.00 * Bucket with bottom holder for quick coupler from 3.5 cubic meters €3,660.00 * 4-in-1 bucket 2 cubic meters, upon request. * Pallet fork 5 tons from €1,850.00 Lhjdpfx Asz A Nqrskmjn If desired, also available with a used scale! Pfreundt WK 60 (calibratable) - €5,900.00 Printer for the scale, price upon request. Prices net + VAT or for export. Note: The brochure only approximately corresponds to the offered machine!!! (Brochure is for machines from the year of manufacture 2019 onwards with engine emission class V) Sale only to business customers or for export. Sale in the condition as is. No guarantee or warranty. The specified mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense of purchase. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics.

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels Ljdpfx Aoxqmrfskmehn This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Condition: good (used), Hydraulic valve, pressure valve, filling valve, pre-fill valve -Manufacturer: Rexroth, Filling valve type ZSF 160 FO-1-14/M/01 -Classification: NG160ZSF-160F1-1 -Nominal size: 160, A B, mechanically operated -Connections: G 1 1/4" / G1/2" Lhedst Ultijpfx Akmen -Individual components: see photos -Overall dimensions: 470/310/280 mm -Weight: 49 kg

Condition: excellent (used), 1 x stainless steel 14 head multihead Screw weigher complete with twin incline feed conveyor and exit conveyor. IP65 rated. Dimple pans for sticky and awkward products. Model TY-P14 Lhjdpfxjz Ak I Uj Akmen

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Lodpfxexwtu To Akmshn Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: used, Year of construction: 2002, gebraucht 2002 4543 prompt, Zwischenverkauf v Spanien 11400 € 1 50 - 1700 (12) U/min ISO 40 600/210/400 mm 800 x 225 mm Lodpfx Akjyrhn Esmehn 1700 mm 1500 mm 1960 mm 950 kg 1,5 kW with 3-Axis Digital display Fabr. Time Technology Europe Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing and 1 pc. long milling arbor Coolant device Machine light automatic feeds in X and Y Machine feet with vibration absorbers no User Manual DOES NOT COMPLY WITH GERMAN UVV & AUSTRIAN AMVO BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, This listing is for the LABCOLD RLDF1520 Climatic Class 4 Refrigerator The unit is in full working condition and is ready for immediate use The LABCOLD RLDF1510 is a pharmacy / vaccine‑grade refrigerator designed for storage of temperature‑sensitive medicines, vaccines, or biological materials Some of its key specs and features: Feature Specification / Detail Capacity ~ 430 litres External Dimensions (H × W × D) 1860 mm × 600 mm × 700 mm Temperature Operating Range +2 °C to +8 °C (nominal operating ~5 °C) Lhjdpfoxhdthjx Akmsn Control / Monitoring “IntelliCold™” controller, 24/7 temperature logging, alarms (high/low temp, door open, power failure) Insulation / Construction Enamelled steel exterior, corrosion‑resistant painted aluminium interior; fan‑assisted cooling; off‑cycle auto defrost Door Type Solid door (non‑glass) version Other Features Door lock with keys, access port for probe, remote alarm contacts, data storage (13 months) Power / Energy Use Often quoted ~ 5.52 kWh/24h (for a 440 L variant/related model) In short: this is a robust, regulated refrigerator intended for cold chain use (i.e. storage of medicines, vaccines, biologics) rather than for general domestic or food us

Condition: used, Year of construction: 2005, operating hours: 8,592 h, Equipment: all wheel drive, Just arrived! Liebherr 524 - excellent machine for storage operations!!! No particulate filter - no AdBlue - no exhaust gas treatment!!! TOP Chassis number: VATZ0438AZB013004 Year of manufacture: 2005 Recorded operating hours: 8592 Liebherr 4-cylinder inline engine, water-cooled with turbocharging and charge air cooling, 86 kW - 118 hp, Version: 33 km/h - hydrostatic drive with 2 speed ranges * Air conditioning * 2 additional headlights on the front of the cab roof * 1 additional headlight on the rear of the cab roof * Debris screen in front of the radiator * Air intake with pre-separator "TopAir" * Road approval possible! * Tires 17.5 x 25 front, 2 x 50% tread * Tires 17.5 x 25 rear, 2 x 40% tread Purchase price for fixed-mount bucket, approx. 2.2 cubic meters: 28,900.00 EUR net, export/domestic, plus 19% VAT. Optional equipment available at an extra cost: Quick coupler, hydraulic, 3,550.00 EUR * High-dump bucket from 3.0 cbm from 4,950.00 EUR * Bucket with lowering device for quick coupler, 3.0 cubic meters from 3,660.00 EUR * Volume bucket 4 cubic meters 4,500.00 EUR * 4-in-1 bucket 2 cubic meters on request. Lhedpe Ad Ta Hefx Akmon * Pallet fork 5 or 8 tons from 2,190.00 EUR All prices net, plus 19% VAT. Inspection by appointment only! Sale only to commercial businesses or for export. Sale in "as is" condition, as the machine stands. No guarantee or warranty. The indicated mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information provided therein serve only for the general identification of the vehicle and do not constitute a warranty in the legal sense. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately. We will also accept your vehicle as part of the payment. We are available to answer any further questions you may have. For our customers from abroad, we prepare all customs and export documents for a smooth transfer to their country.

Year of construction: 2014, condition: used, functionality: limited functionality, machine/vehicle number: 02/2014, The flat pouch packaging machine is suitable for packaging bulk products, granular and powdered materials, spices, and cream powders into paper-based or composite film packaging. It requires a continuous supply of the material to be filled and an intermittent supply of packaging material. All packaging operations are performed in automatic mode. Ljdpfoz Ryfwsx Akmshn The equipment has been taken out of production, had no issues, but has not been used for three years, so it may require refurbishment. Stored in a covered, enclosed warehouse.

Condition: used, Year of construction: 2017, operating hours: 8,340 h, Beautiful machine - Well equipped - No play in the joints - No oil leaks! VIN: VATZ1265CZB044737 Year of manufacture: 2017 Original operating hours: 8,350 hours Liebherr dealer maintained Special factory paint RAL 1027 curry yellow 4-cylinder inline engine, water-cooled with turbocharging, 103 hp Hydrostatic travel drive with 2 speed ranges – max. 32 km/h * Standard Z-bar linkage * Ride control / boom suspension * Hydraulic quick coupler with installation kit * Liebherr factory-installed central lubrication system * 3rd hydraulic control circuit for high-tip / grab bucket / or 4-in-1 bucket * Steel lamp brackets instead of plastic * Rear tow hitch * "Comfort" suspended driver’s seat * Comfort radio * 2 LED work lights at rear of cab roof * 2 LED work lights at front of cab roof * Adjustable steering column * Rotating beacon / warning strobe on the center of the cab roof * Crane / lashing eyes at rear and front frame * Fire extinguisher * Road approval 32 km/h Tires 17.5 x 25 L3, front axle: 2 tires, 95% tread, like new!! Tires 17.5 x 25 L3, rear axle: 2 tires, 95% tread, like new!!! Permissible total weight approx. 10,500 kg Operating weight approx. 8,500 kg Lhsdpsyqn Hlofx Akmsn Offer includes quick coupler and 1.6 cbm standard bucket – Price: €46,900 net (export), plus 19% VAT for domestic sales Optional attachments at additional cost: · Folding bucket 2 cubic meters from €3,550 · High-tip bucket · Screening / mixing bucket, manufacturer "Wolf" · 5-ton pallet fork from €2,190 Prices net plus VAT or for export Sale only to businesses or for export. Sale in as-is condition. No guarantee or warranty. The indicated operating hours or kilometer readings are taken from the hour or odometer counter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not represent a binding offer and the details provided should not be regarded as warranted characteristics. The description and information serve only for general identification of the vehicle and do not constitute a legal warranty. Information is not guaranteed to be complete. Any details/descriptions and images are non-binding and do not represent assured properties. Only the stipulations in the order confirmation and invoice are binding. The seller assumes no liability or warranty. The advertisement may contain typing or data transmission errors. The seller has not inspected the machine. Equipment needs to be checked separately if necessary. We gladly accept your vehicle as a trade-in. For further questions, please contact us. For our international customers, we can prepare all customs and export documents for smooth transfer abroad.

Condition: like new (used), Year of construction: 2016, operating hours: 101 h, load capacity: 1,400 kg, lifting height: 2,900 mm, fuel type: electric, mast type: duplex, construction height: 1,920 mm, Manufacturer + model: STILL EXP 14 Atex * EX * Mitrex - 2GD - Zone 1, 21 and 22 Mast: 2F2900 ID: 22123.0042 Category: Demo Mast: 2F2900 Lowered height: 1920 mm Lifting height: 2900 mm Capacity: 1400 kg Year: 2016 Hours: 101 hours Capacity: 24 V / 345 Ah Options: * EX * Mitrex !!!!! System: ATEX 94/9/EC - Compliant with 2014/34/EU Gas group: IIB + IIIB Type: 2GD - Exd dB 11B T5 Gb (permitted in Zone 1, 21 and 22) Temperature class: T6 (85 *C) Wide track * EX * version Lsdpfszutw Nsx Akmohn - PROPORTIONAL lift and lower valves - with FREE-MOVING adjustable forklift forks - SUITABLE for all types of pallets - also equipped with ADJUSTABLE support legs POWER STEERING

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of manufacture: 2016 For cleaning grinding emulsions Supply rate: max. approx. 250 L/min. at approx. 3.5 bar water pressure Overflow to the filter system is provided on site, air- and foam-free. Maximum temperature: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to dirty tank: 100-350 L/min. Machine supply: max. 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Particle separation limit: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particle volume: approx. 5.14 m3 Operating volume max.: approx. 4.58 m3 Operating volume min.: approx. 3.60 m3 Process flow: fully automatic full-flow filtration Sludge discharge: fully automatic, with consistent solid content The dirty liquid is fed via on-site pumping stations. The chips and fine sludge generated during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. The sludge is pre-dried in the upper section of the scraper. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system operates fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharging grinding sludge Type: KR 1.75-5.1 Ljdpfx Aszwccmekmehn Total volume: approx. 5.14 m3 Maximum volume: approx. 4.58 m3 Length: approx. 4,000 mm, including 70 mm stiffening Width: approx. 1,890 mm, including 140 mm stiffening Height: approx. 1,105 mm, including 100 mm base profile Neck height: approx. 2,300 mm Theoretical maximum discharge volume: 15 kg/h Function: Coolant tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank. Oil-tight welded, with internal circumferential bevel gear, various cover plates (non-walkable plates screwed onto an angle frame), without ladder, without railing, without internal access rungs Maximum volume: approx. 0.55 m3 191026ä

Condition: excellent (used), Condition: used, with normal signs of use, fully functional Manufacturer: Vetter (Germany) Country of manufacture: Germany 📦 Set includes: Vetter air lifting bag air hoses with quick couplings transport bag complete set as shown in the photos ⚙️ Technical data: Model: Type 1/13 (VSM 14) Max. lifting force: 65 kN (approx. 7.2 tons) Lhodoz Smv Hjpfx Akmsn Max. working pressure: 1 bar (14.5 PSI) Nominal capacity: 403 L Air requirement: 806 L Year of manufacture: 2018 🛠️ Applications: technical rescue (fire brigade) lifting of machinery and vehicles service and industrial work emergency situations 📌 Additional information: equipment from a reputable German manufacturer robust and durable construction fast and safe lifting of heavy items sold exactly as shown in the pictures

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: MTU 12V4000 L33, type of input current: three-phase, total height: 5 mm, total length: 25 mm, total width: 3 mm, type of cooling: water, Equipment: documentation/manual, rotational speed infinitely variable, Plant assembled and NEVER put into operation Cogeneration Unit MTU 12V4000 L33 GAS GENERATOR SET Condition: New – 0 hours Enclosure: Enclosed container Rated electrical power: 1,262 kW Thermal power: 1,355 kW Electrical efficiency (cos φ = 1.0): 42.1% Thermal efficiency: 45.2% Total efficiency (full heat recovery): 87.3% Fuel consumption: • At 100% load: 299 Nm³/h • At 75% load: 232 Nm³/h • At 50% load: 167 Nm³/h Manufacturer: MTU – Centrica Business Solutions Srl Equipment designation: Type: E1265 250 Nox L33 Natural Gas CHP Unit Configuration: Containerized Rated current: 1,935 KVA Engine: Genset Rolls Royce MTU 12V4000L33 Number of cylinders: V12 Max engine power: 1,320 kW Generator: Stamford Model: PE734E-312 Type: Three-phase, synchronous, four-pole, brushless Rated voltage: 400 V Lhjdpfxeydqlqo Akmsn Frequency: 50 Hz Dimensions (L x W x H): 12,800 / 2,700 / 2,900 mm Absorption Unit CARRIER 16LJ-F41 Condition: New – 0 hours Enclosure: Enclosed container Capacity: 1,178 kW Cooling System Flow rate: 56.4 L/sec Pressure: 45 kPa Connection (DIN): 8” (inch) Volume: 0.48 m³ Heat Rejection System Flow rate: 93.1 L/sec Pressure: 117 kPa Connection (DIN): 10” (inch) Volume: 1.39 m³ Dimensions (L x H x W): 5,330 x 3,080 x 1,690 mm Weight: 13,700 kg Evaporative Cooling Towers: No. 2 Condition: New – 0 hours

Condition: used, Year of construction: 1969, Used Machine Year of manufacture: 1969 Features and technical specifications: - Working width: max. 170 mm; planing head: 125 x 170 x 35 mm - Working height: max. 130 mm; planing head: 125 x 130 x 35 mm - 1st shaft: bottom, 3 kW - 2nd shaft: right, 3 kW - 3rd shaft: left, 4 kW - 4th shaft: right, 4 kW - 5th shaft: top, 4 kW - Feed speed: continuously adjustable from 5 to 40 m/min Lodpfx Ako Ad Rn Iemjhn

Condition: good (used), Offer consisting of: Transomat/stacker by Knorr Systeme, robust design, year of manufacture 1999, incl. material for supplementing a guillotine cutter, year of manufacture 1999. Lhodpfx Asxwqx Nekmsn

Condition: used, Year of construction: 2006, power capacity max 22 kW volt / V ampere / A Lhedpfjmpb Inex Akmon