Used Lanson Gt3-Ls90S for sale (22)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, clamping force: 900 kN, screw diameter: 35 mm, injection pressure: 1,750 bar, injection weight: 135 g, total length: 4,080 mm, total width: 1,142 mm, total height: 1,874 mm, pressure: 160 bar, closing stroke: 320 mm, Lanson GT3-LS90S – Injection Moulding Machine Title Lanson GT3-LS90S Injection Moulding Machine, 90 Ton, 2024, Excellent Condition, with Vacuum Loader and Doser Price EUR 17,500 Description For sale: 2024 Lanson GT3-LS90S plastic injection moulding machine. Purchased new in 2024, in excellent condition, serviced, fully operational, and ready for immediate production. Estimated production history is approximately 50,000 shots. The machine is fitted with a 35 mm B screw, hydraulic safety door, two sets of air blowers, and a high-mixing screw. Included in the sale: 1 × WSAL-1.5HP vacuum loader and 1 × VCM-20 masterbatch volumetric doser dispenser. Technical Specifications Model: GT3-LS90S Machine Type: Plastic Injection Moulding Machine Series: GT3-S Clamping Force: 900 kN Approximate Clamping Tonnage: 90 ton International Size Rating: 900-262 Screw Diameter: 35 mm Screw Type: B Screw Screw L/D Ratio: 20.1 Shot Volume: 149 cm³ Shot Weight (PS): 135 g Plasticizing Capacity (PS): 21.1 g/s Injection Pressure: 175 MPa Screw Speed: 330 rpm Mould Opening Stroke: 320 mm Tie Bar Spacing: 360 × 360 mm Platen Size: 550 × 550 mm Minimum Mould Height: 185 mm Maximum Mould Height: 385 mm Ejector Stroke: 100 mm Ejector Force: 31 kN Ncjdpfx Aksyz Sb Njfer Number of Ejectors: 5 Hydraulic System Pressure: 16 MPa Pump Motor Power: 14 kW Heater Power: 6.1 kW Oil Tank Capacity: 220 L Machine Dimensions: 4080 × 1142 × 1874 mm Machine Weight: 3.0 ton Year: 2024 Condition: Excellent, serviced, ready for operation Included in This Sale 1 × WSAL-1.5HP Vacuum Loader 1 × VCM-20 Masterbatch Volumetric Doser Dispenser

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, clamping force: 2,600 kN, screw diameter: 60 mm, injection pressure: 1,850 bar, injection weight: 720 g, total length: 6,329 mm, total width: 1,542 mm, total height: 2,071 mm, pressure: 175 bar, closing stroke: 525 mm, Lanson GT3-LS260S – Injection Moulding Machine Title Lanson GT3-LS260S Injection Moulding Machine, 260 Ton, 2024, Excellent Condition, with Vacuum Loader and Doser Price EUR 33,100 Description For sale: Lanson GT3-LS260S plastic injection moulding machine, purchased new in 2024. The machine is in excellent condition, professionally serviced, fully operational, and ready for immediate use in production. Approximate shot count is around 50,000 cycles. The machine features a 60 mm reinforced screw for glass fibre, B type screw, hydraulic safety door, two air blow circuits, and a high-mixing screw. Included in the sale: 1 × WSAL-1.5HP vacuum loader and 1 × VCM-20 masterbatch volumetric doser dispenser. Nameplate verifies model GT3-LS260S with a production date of 2024.09. Technical Specifications Model: GT3-LS260S Machine type: Plastic injection moulding machine Series: GT3-S Clamping force: 2,600 kN Clamping tonnage: approx. 260 ton International size rating: 2600-1462 Screw diameter: 60 mm Screw type: B screw, reinforced screw for glass fibre Screw L/D ratio: 21.0 Shot volume: 792 cm³ Shot weight (PS): 720 g Plasticising capacity (PS): 53.0 g/s Injection pressure: 185 MPa Nodpfxeyz Sfzj Akfecr Screw speed: 210 rpm Mould opening stroke: 525 mm Tie bar spacing: 580 × 580 mm Platen size: 875 × 875 mm Minimum mould height: 250 mm Maximum mould height: 630 mm Ejector stroke: 160 mm Ejector force: 67 kN Number of ejectors: 13 Hydraulic system pressure: 17.5 MPa Pump motor power: 32 kW Heater power: 15.4 kW Hydraulic oil tank capacity: 530 L Machine dimensions (L×W×H): 6,329 × 1,542 × 2,071 mm Machine weight: 8.0 ton (according to catalogue) Nameplate weight: 8,200 kg Year: 2024 Condition: Excellent, serviced, ready for operation Included in this sale 1 × WSAL-1.5HP Vacuum Loader 1 × VCM-20 Masterbatch Volumetric Doser Dispenser

Condition: used, functionality: unexamined, Ferwood Code: RU0010347 - Manufacturer Code: S446.030.9004 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer overhaul service, please contact us. 18KG - 36X26X21 Ncodpfoycfd Ssx Akfjr

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. The machine is ready for hot stamping and die cutting. Nsdpfxsy E Exvo Akfjcr Machine format: 32x46cm Press force: 60t Weight: 600gsm Operating speed: 4000 sheets/h This model is designed for hot stamping and features a large heating plate. Weight: 2300kg Holder manufactured by Hakro. Includes frame, fillers, and letterpress locks.

Condition: good (used), Original Heidelberg GT 34×46 Automatic Die Cutter This machine can cut, creas, perforate, and even print (optional). Excellent condition, recently serviced. Nodpfjywdr Sjx Akfscr 100% original, no modifications. Machine format: 34x46cm Pressure: 60t Weight: 600gsm Working speed: 4000 sheets/h Weight: 2300kg Fully complete, includes frame and spare parts, but no print rollers. A very rare machine on the market.

Condition: new, Year of construction: 2025, DN SOLUTIONS PUMA GT3100L (12/2025) – Long Bed Model: PUMA GT3100L Year: 12 / 2025 Steady rest Chuck Size: 12 inch Max Turning Diameter: ~ Ø480 mm Max Turning Length: ~ 2,000 mm (long bed) Spindle Bore: 102 mm Spindle Speed: 3,000 rpm Main Motor Power: 26 kW Max Torque: ~ 735 Nm X Axis Rapid Traverse: 24 m/min Z Axis Rapid Traverse: 24 m/min Guideway Type: Box guideways Control Unit: Fanuc i Plus Njdpsy Hfh Hefx Akfjcr Turret: 12 station

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm Nedpfx Aksy E I Hisfscr • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA Additional equipment • OPTIONAL: HALTER LoadAssistant Universal Big 70 (robot) • Gripper for Doosan Universal Big 70 • Turning station • Workpiece support • Base plate 23 mm / 175 mm Big 70 • Machine interface box Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), OUR MACHINE IS AT THE ISTANBUL CUSTOMS WAREHOUSE. Turkuaz CNC DN Solutions (DOOSAN) PUMA GT3100 12 inch Nsdpfeywuqfex Akfecr 2022.09 model Maximum turning length: 755 mm Maximum turning diameter: 481 mm Spindle: 102 mm Measuring arm, chip conveyor Fanuc i PLUS control panel Worked for 4249 part processing hours For detailed photos, videos, and further information, please contact us. Muhammed ÖZKAYA

Condition: used, CNC lathe Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T ASA 5 Main spindle power 15 Kw Self-centering diameter 175 mm ASA 5 spindle connection Bar passage 52 mm Turning diameter 230 mm Turning length 500 mm Number of revolutions 5000 Number Tool holder turrets1 Number of tool places first turret 12 Number of motorized first turret 12 First turret tool attachment typeVDI 30 X Axis Travel 160 mm Y Axis travel + - 32 mm Z Axis travel 550 mm Linear axis rapid feeds X Y Z30 m/min Counter spindle yes ASA 5 spindle nose Number of counter spindle revolutions 5000 Power sub spindle 9 Kw Spindle Hole 30 mm Model and brand of bar loader LNS single bar tube Belt chip conveyor Presetting yes 2000 The machine can be seen under power in our warehouse in Gussago BS. Mimu machine tools Ncsdpfxjqn E U Tj Akfor

Condition: ready for operation (used), Year of construction: 2010, spindle speed (max.): 3,000 rpm, travel distance X-axis: 275 mm, travel distance Z-axis: 1,283 mm, spindle motor power: 5,500 W, total height: 2,000 mm, total width: 1,195 mm, overall weight: 8,000 kg, controller manufacturer: FANUC, product length (max.): 2,950 mm, number of axes: 3, This 3-axis YCM GT-300LMB was manufactured in 2010. It features a maximum spindle speed of 3000 rpm and a chuck size of 12 inches. The machine offers an X-axis travel of 275 mm and a Z-axis travel of 1283 mm, making it suitable for various turning applications. If you are looking to get high-quality turning capabilities, consider the YCM GT-300LMB horizontal turning machine we have for sale. Contact us for further details. • Spindle bore: Ø100 mm Ncsdpfx Ajyv E Irekfor • Chuck size: 12 in Technical Specification Counter Spindle No Driven Tools Yes

Condition: as good as new (ex-display), Year of construction: 2025, GT 30 - The OPTIMUM premium NC sanding machine with Siemens touch screen. - Electromagnetic clamping plate for fixing the workpiece with automatic demagnetization function - High-quality spindle with precision tapered roller bearings - Hardened and ground table guideways - Turcite-B coated counter guides for high wear resistance and low friction - Grinding spindle with high-quality precision bearings - Grinding wheel can be resharpened directly on the machine using a sharpening device - Digital position indicator - Machine base made of sturdy torsion-resistant cast iron for maximum rigidity and stability - Guideways for longitudinal, transverse and vertical movements are backlash-free and self-centring as V and flat tracks - Precision recirculating ball screws - Guideways and transport spindle with central lubrication - All flat guides are finely scraped and thus guarantee maximum precision of all manual movements - Safety electrics with 24 V DC voltage - Large decoupled handwheels in all three axes - Hydraulic lines according to DIN EN 853 - Sanding accuracy: 0.005 mm - Grain 46 corundum grinding wheel for all common steels - Swivel-mounted control panel makes work considerably easier - Separate hydraulic unit with heat exchanger, avoids vibrations and thermal stress - Two-channel safety electronics - Grinding table splash guard - EMC filter class - With IE3 motor - consumes considerably less energy, resulting in significant cost savings Dimensions and weights Length approx. 3200 mm Width/depth approx. 2200 mm Height approx. 2100 mm Weight approx. 3000 kg Electrical data Total connected load 6.5 kW Supply voltage 400 V Mains frequency 50 Hz Ncsdpfeymdtyox Akfor Surface grinding table Clamping surface length 300 mm Clamping surface width 600 mm Grinding wheel(s) Outer diameter 350 mm Width 40 mm Bore 127 mm Peripheral speed 27 m/s Spindle Speed 1450 min¯¹ Concentricity 0.005 mm X-axis Feed speed 5 - 25 m/min Scope of delivery Unit of measure: piece Packaging unit: 1 Digital position indicator Coolant device Balancing mandrel Grinding wheel grit 46 Diamond pin Operating tool Manual oil pump LED lamp Electromagnetic clamping plate Demagnetizing function Equipment Electromagnet clamping plate Splash guard table enclosure Automatic demagnetizing device Parallel dressing device ✔ Coolant device 125 W Work light LED lamp Alignment feet ✔

Condition: good (used), machine/vehicle number: 1161020, Year of construction: 2016, Width: 3,000mm, front boom dimension: 135mm, load capacity: 3,000kg Ncjdpjt A A Igjfx Akfer

Condition: new, functionality: fully functional, power: 14.6 kW (19.85 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 1 l, color: yellow, operation weight: 3,000 kg, maximum load weight: 3,000 kg, lifting height: 4,010 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, first registration: 01/2026, emission class: euro5, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: 1, Equipment: additional headlights, air conditioning, cabin, Excavators GT3000 The GT3000 excavator is a modern crawler machine designed for earthmoving operations that require an extensive working range, high breakout force, and a stable construction. Thanks to its compact dimensions and robust undercarriage, the machine is ideal for foundation work, installation jobs, municipal projects, and tasks in areas with limited maneuvering space. Engine The machine is equipped with a reliable Yanmar 3TNV80F engine delivering a rated power of 14.6 kW. This engine ensures stable and fuel-efficient performance. Working Range The excavator is fitted with a bucket offering a capacity of 0.09 m³ and a width of 460 mm. The bucket breakout force of 17.6 kN enables efficient digging, even in tougher soil conditions. A maximum digging depth of 2810 mm and a maximum reach of 4375 mm provide a large operational area, reducing the need for frequent repositioning. A maximum digging height of 4510 mm and a dumping height of 2760 mm allow easy loading of material onto transport vehicles. Dimensions and Stability The overall dimensions of the machine are 4010 mm in length, 1540 mm in width, and 2360 mm in height up to the top of the cab (1380 mm to the top of the boom). The track contact length with the ground of 1530 mm and a track gauge of 1510 mm ensure stability during operation. The 250 mm wide track shoes and low ground pressure of 26.7 kPa allow safe operation on less compacted surfaces. Mobility and Maneuverability A rear swing radius of 710 mm allows comfortable operation in confined spaces. The swing frame width of 1350 mm and a counterweight clearance of 485 mm, as well as a minimum ground clearance of 255 mm, enable smooth movement over uneven terrain. The sturdy undercarriage with a track length of 1895 mm guarantees good traction and safe operation. Technical specifications Operating weight: 3000 kg Engine: Yanmar 3TNV80F Number of cylinders: 3 Rated power: 14.6 kW Ncjdpfx Aksymtfxofor Bucket capacity: 0.09 m³ Bucket width: 460 mm Bucket breakout force: 17.6 kN Swing arm: Present Joystick: Present Swing speed: 13 rpm Max. digging height: 4510 mm Max. dumping height: 2760 mm Max. digging depth: 2810 mm Max. reach: 4375 mm Rear swing radius: 710 mm Track contact length with ground: 1530 mm Total track length: 1895 mm Track gauge: 1510 mm Track shoe width: 250 mm Swing frame width: 1350 mm Ground pressure: 26.7 kPa Total length: 4010 mm Total width: 1540 mm Total height (to top of boom): 1380 mm Total height (to top of cab): 2360 mm Counterweight clearance: 485 mm Minimum ground clearance: 255 mm

Condition: like new (used), Year of construction: 2022, functionality: fully functional, turning length: 725 mm, turning diameter over cross slide: 590 mm, turning diameter: 376 mm, spindle motor power: 30 W, spindle speed (max.): 2,800 rpm, spindle bore: 115 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, torque: 1,112 Nm, bar passage: 103 mm, bar diameter (max.): 103 mm, quill stroke: 100 mm, quill diameter: 100 mm, quill travel distance: 100 mm, swing diameter over cross slide: 590 mm, spindle nose: A 2-11, swing diameter over bed slide: 720 mm, feed force X-axis: 9,465 N, feed force Z-axis: 17,379 N, Equipment: documentation/manual, rotational speed infinitely variable, As-new machine, only used for commissioning and combined with a Universal BIG 70 LoadAssistant holder. Can also be purchased separately. Ncodpfx Akeyud Uaefjr

Condition: used, Year of construction: 2017, Doosan Puma GT3100LM Year of manufacture: 2017 Control: Fanuc 0i-TF Turning diameter: [mm] 376 Nodpfx Aoxggktjkfecr Turning length [mm] 1245 Main spindle: Belt-driven spindle Max. spindle speed 2800 rpm Max. power 22 kW Max. torque 1124 Nm Bar capacity 102 mm 3-jaw chuck, Schunk ROTA THW plus 315-104 12-position turret BMT65 turret head Travel in X/Z axes 260/1350 mm

Condition: excellent (used), With C-axis With driven tools FANUC TXP-200 FA control Nsdpfx Akoq Dlt Sofecr Turning diameter max 360 mm Turning length -683 mm Swing Diameter -450 mm Spindle speeds -3'000 rpm Top turret tool holders 12 driven positions Misc. accessories MARCELS MASCHINEN CH

Condition: like new (used), Year of construction: 2024, functionality: fully functional, turning length: 1,275 mm, turning diameter: 481 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 26 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,907 mm, total length: 5,300 mm, total width: 2,105 mm, type of input current: three-phase, overall weight: 6,900 kg, spindle nose: ASA 11, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​2-axis CNC lathe "DN Solutions model PUMA GT3100L" with DN Solutions-Fanuc i-Plus iHMI CNC complete with chip conveyor, Morari self-centering steady rest with 15-170mm opening, automatic doors, 12-position turret, auto power off and tool life management. Ncodpfx Akswuti Usfor

Condition: new, empty load weight: 1,300 kg, maximum load weight: 2,200 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 7,330 mm, loading space width: 2,400 mm, loading space height: 2,300 mm, loading space volume: 40.3 m³, color: black, construction height: 2,300 mm, working width: 2,400 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, sheet steel sandwich body 40mm walls, braked, PVC floor, 3x sales hatch + bag storage, gas door, * IMMEDIATELY AVAILABLE * Sheet steel sandwich body 40mm walls, braked, PVC floor, 3x sales hatch + bag storage, gas door TECHNICAL DATA - Make: Other - Model: VK 35602523 - Vehicle type: Sales trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 597 x 240 x 230 cm - External dimensions (L x W x H): 733 x 250 x 293 cm - Floor loading height: 55 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,300 kg - Payload: 2.200 kg - Chassis: High loader (wheels under the body) - Tyres: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Sturdy V-drawbar, hot-dip galvanized - Tandem axle - Floor plate made of multiplex - Side walls made of very solid sheet steel sandwich, 40 mm thick - Sales hatch on the right side with bag storage - Lockable gas door - Additional rear sales hatch with bag storage - PVC covering on the floor - Door in the front wall, lockable from the inside and outside - Step on the drawbar - Support wheel with clamp - 4x scissor supports mounted incl. crank - Maintenance-free rubber support legs - Maintenance-free rubber support legs on the front wall, lockable from the inside and outside. maintenance-free rubber spring axles from KNOTT - automatic reverse drive - KNOTT overrun device and parking brake - plastic mudguards - 13-pin plug - reversing lights - large safety lighting - integrated rear fog light Accessories can be retrofitted at extra cost - please enquire: - anti-theft device - 100km/H approval with wheel shock absorber - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Ncjdpfx Aksu Ht Tcofer

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 1,800 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 650 mm, workpiece weight (max.): 180 kg, We are selling a refurbished Wenzel WGT350 XL rack and pinion measuring machine. The machine can be used to measure gears and racks. - Max. Rotary table workpiece diameter = 5 to 400mm - Max. Rotary table load = 180kg - Travel X= 1800mm Y=200mm Z=650mm - Counterholder measuring range = 20 to 900mm - Module measuring range from 0.5mm - Max. Max. rack length = 1200mm - 6x probe changer incl. 6x SP600M plates - Temperature compensation of the machine - Active air damping of the machine - Year of manufacture 2006 - Accessories such as, driver, reference ball etc. as shown - Jaw chuck D=200mm with inside and outside jaws The following software modules are included: - TMain - program management - TStylus - Probe management - TCali - probe calibration - TAmo - Calculated axis position determination - TGear - Cylindrical gear measuring program - TShaft - Program for dimension, form, position and scanning of unknown contours - contours Nodpfxjvitkie Akfocr - TWorm - Worm measuring program - TRack - Rack software - TReverse - The parameters of an unknown gear, module (mn), helix angle (ß) and pressure angle (a), can be determined with TReverse. can be determined. - Statistical program, statistical evaluation for spur gear, bevel gear and worm gear testing. worm testing For further information, please contact us by e-mail.

Condition: used, Year of construction: 2013, load capacity: 2,500 kg, Pantograph ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: poor Description: Year 2013 ISO 3A (51 cm) to ISO 2A (41 cm) Capacity 2500kg Opening range 0-950 mm Width 1080 mm ID OS1357 Njdsudgazjpfx Akfscr

Condition: used, Year of construction: 2017, Year: 2017 Condition: good Schulze PRETREATmaker IV A unique device for applying penetrant liquid before textile printing. Thanks to the dimensions of the area it is capable of apply liquid (40x60 cm) is especially suitable for DTG printers M2, M3, M4, but of course also for printers with a smaller printing area flat, such as R-Jet, Brother GT3, Anajet, TexJet... The advantage is that it does not need a compressor. The machine is equipped with 4 independent and adjustable nozzles (you can apply only small area, e.g. when printing logos on hearts). Spraying time of full area 40x60 - 4.5 seconds. Optional spray size liquids of 2 cm each (2 - 60 cm length). Large clear LCD display. 5 storable positions/area and quantity settings injection. High efficiency and productivity of work. It does not need a compressor * The machine has 4 independently adjustable nozzles (you can apply only a small area, e.g. when printing logos on hearts) * Spraying time of full area 40x60 - 4.5 seconds * Optional liquid injection size of 2 cm (2 - 60 cm length) * Large clear LCD display * 5 storable positions/area settings and spray amount * High efficiency and productivity of work PRETREATmaker IV is a top-of-the-line device designed for the professional application of penetrating liquid to textiles. It has an advanced electronic system, which enables high performance and easier control during the textile pretreatment process. Clear color touch screen allows you to easily adjust the length and width of the spray and to easily adjust the spray volume. The device is equipped four nozzles, each of which can be switched on individually. This allows you to precisely adjust the area to apply the penetrating solution (Dupont Artistri, Image Armor, Brother...) but also saves a lot of penetration compared to applying by hand with a pressure/air gun. The length of the spray area can be regulated in 2 cm increments, using the touch screen. To set the amount of penetration liquid application, 10 values are available. Pre-treat maker IV also has an automated cleaning process for the spray nozzles (consumption approx. 12 ml per hour), which keeps nozzles through and prevents them from drying out or blocking. Spray area: 40 x 60 cm Spray method: Nozzles move above the table (inside) Table length: 80 cm Nozzles: 4 pieces Dimensions: T 90 x W 72 x H 48 cm Dimensions (for transport): T 95 x W 80 x H 61 cm Weight: 68 kg Weight (for transport): 86 kg Connection: 220/230 or 110/120 VAC (automatic switch) Consumption: 150 W Operating pressure (before coating): max. 7 bar Menu: 5 languages: German, English, French, Italian, Polish Measurement: "cm" or "inch" Included in delivery: spare nozzle, spare filter and ultrasonic cleaner Other features: galvanized and powder-coated housing Ncjdjufi Uwspfx Akfsr

Condition: used, Year of construction: 2017, Thermal Transfer Press Year: 2005 Status: functional Ncodsufknrspfx Akfer Model: Schulze Air press x Double pneumatic transfer press, semi-automatic model. The pressure can be adjusted using an air pressure gauge, which also ensures the same pressure regardless of the quality of the garment. Digital temperature and time control. After the transfer is complete, the will open automatically. Bottom plates are available in different sizes. • Print format: 400 x 500 • Dimensions: 1.67 x 0.74 x 0.98 m • Weight (including packaging): 170 kg • Power consumption: 10 A / 230 V • Temperature: max. 220 °C • Temperature accuracy: ± 0.5% • Power: 2.4 kW • Heating time: 12 min. at 180 °C • Timer range: max. 9 min., 59 sec. • Operating pressure: 2490 kg Schulze PRETREATmaker IV Year: 2017 Condition: good A unique device for applying penetrant liquid before textile printing. Thanks to the dimensions of the area it is capable of apply liquid (40x60 cm) is especially suitable for DTG printers M2, M3, M4, but of course also for printers with a smaller printing area flat, such as R-Jet, Brother GT3, Anajet, TexJet... The advantage is that it does not need a compressor. The machine is equipped with 4 independent and adjustable nozzles (you can apply only small area, e.g. when printing logos on hearts). Spraying time of full area 40x60 - 4.5 seconds. Optional spray size liquids of 2 cm each (2 - 60 cm length). Large clear LCD display. 5 storable positions/area and quantity settings injection. High efficiency and productivity of work. It does not need a compressor * The machine has 4 independently adjustable nozzles (you can apply only a small area, e.g. when printing logos on hearts) * Spraying time of full area 40x60 - 4.5 seconds * Optional liquid injection size of 2 cm (2 - 60 cm length) * Large clear LCD display * 5 storable positions/area settings and spray amount * High efficiency and productivity of work PRETREATmaker IV is a top-of-the-line device designed for the professional application of penetrating liquid to textiles. It has an advanced electronic system, which enables high performance and easier control during the textile pretreatment process. Clear color touch screen allows you to easily adjust the length and width of the spray and to easily adjust the spray volume. The device is equipped four nozzles, each of which can be switched on individually. This allows you to precisely adjust the area to apply the penetrating solution (Dupont Artistri, Image Armor, Brother...) but also saves a lot of penetration compared to applying by hand with a pressure/air gun. The length of the spray area can be regulated in 2 cm increments, using the touch screen. To set the amount of penetration liquid application, 10 values are available. Pre-treat maker IV also has an automated cleaning process for the spray nozzles (consumption approx. 12 ml per hour), which keeps nozzles through and prevents them from drying out or blocking. Spray area: 40 x 60 cm Spray method: Nozzles move above the table (inside) Table length: 80 cm Nozzles: 4 pieces Dimensions: T 90 x W 72 x H 48 cm Dimensions (for transport): T 95 x W 80 x H 61 cm Weight: 68 kg Weight (for transport): 86 kg Connection: 220/230 or 110/120 VAC (automatic switch) Consumption: 150 W Operating pressure (before coating): max. 7 bar Menu: 5 languages: German, English, French, Italian, Polish Measurement: "cm" or "inch" Included in delivery: spare nozzle, spare filter and ultrasonic clean...