Used Life Technologies Ion Torrent Onetouch Es for sale (35,966)

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch ES This unit does not come with the Ion Torrent OneTouch ES Enrichment component of the Ion OneTouch 2 template amplification & ample preparation system Gedpfxjxzg T Rs Ap Debu 110-240VAC 50/60Hz 0.5 Amp

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 with OneTouch ES The Life Technologies Ion OneTouch 2 with Ion OneTouch ES comprises two modules: the Ion OneTouch™ 2 Instrument and the Ion OneTouch™ ES (enrichment system). It simplifies the workflows by providing an automated solution for scalable and reproducible template preparation. It is used for DNA sequencing in healthcare, lab and life sciences. It streamlines the overall Ion semiconductor sequencing workflow, yielding significant time savings and increasing sequencing productivity. The system enables parallel template processing with sample sequencing on the Ion Proton™ or Ion PGM™ sequencers. This reduces the time from sample to sequence to a single day and enables processing of multiple samples per day. The combination of Ion semiconductor sequencing and the Ion OneTouch™ 2 System maximizes the speed of each experiment and minimizes the overall time to completion for each project. The modular design also allows for QC of Ion Sphere™ particles, to maximize experimental control and the success of each experiment. Features: Integrates multiple manual template preparation workflows into a single system Enables parallel processing of multiple samples per day through modular design Supports scalable template preparation for all Ion semiconductor sequencing chips Supports up to 400 bases on the Ion PGM™ System and up to 200 bases on the Ion Proton™ System Includes a full thermal cycling modality for amplification for quick optimization of thermal cycling parameters Employs a peristaltic pump fluidic system that eliminates the need for gas Gbsdpfxjxzg Ubj Ap Dsu Fits easily on any benchtop with its small instrument footprint Specifications: Weight, OneTouch 2 23 lbs. (10.4 kg.) Weight, OneTouch ES 12 lbs. (5.4 kg.) Dimensions, OneTouch 2 12" W x 16" D x 14" H (30 x 41 x 36 cm) Dimensions, OneTouch ES 9.5" W x 12.5" D x 11" H (24 x 32 x 28 cm) Operating Humidity 20%-80% (non-condensing) Operating Temperature 15°C-25°C Multiplex Capability Up to 384 barcoded libraries High Throughput Compatibility Automated Protocols, Multiplexing, High Throughput-Compatible Power 100-240 VAC, 50/60 Hz, 5.5 A max

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 The Ion OneTouch 2 Instrument performs template amplification as part of the manual workflow for the Ion PGM, Ion Proton, Ion S5, and Ion S5 XL systems. It provides scalable template preparation for all Ion semiconductor chips. The instrument has a small footprint and fits easily on any bench top. For a fully automated workflow, please see the Ion Chef Instrument. The Ion OneTouch ES enrichment module is not included in this purchase. For both the Ion OneTouch 2 Instrument and ES module Gsdsxzg T Depfx Ap Dsbu Efficiency and flexibility The Ion OneTouch 2 instrument integrates multiple manual template preparation steps into a single system. This enables parallel processing of multiple samples per day through modular design. It is flexible and supports scalable template preparation for all Ion semiconductor sequencing chips with up to 400 bases on the Ion PGM, up to 200 bases on the Ion Proton System, up to 400 bases on the Ion 520 and Ion 530 chips, and up to 200 bases on the Ion 540 chip. The need for gas is eliminated by the use of a peristaltic pump. Contributing technologies At the heart of the Ion OneTouch 2 Instrument are three breakthrough technologies that enable automated delivery of the template Ion Sphere particles. The first is the reaction filter that creates millions of microreactors in which clonal amplification occurs. The second is the fully integrated thermal cycler and disposable path amplification plate that enables robust thermal cycling of the microreactors. The third is the integrated centrifuge, which recovers the template Ion Sphere particles. Altogether this allows the OneTouch2 instrument to deliver massively parallel clonal amplification and recovery, all in a small bench top footprint.

Condition: used, This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply The unit is in full working condition and is ready for immediate release he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Weight: 2.9 kg (6.4 lbs) Features & Functionality Designed for Mini Gels: Optimized for use with mini gel electrophoresis setups. LCD Display: 240 × 128 pixel interface displaying real-time run data. Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels 4 user-defined custom methods Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Supports thermal shutoff with probe. Gbsdpfoxv A N Rsx Ap Dsu Usage & Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.

Year of construction: 2016, condition: ready for operation (used), Life Technologies Amex 1000 Evos XL Core Digital Microscope Magnifications: 4x, 10x, 20x Dimensions: approx. 410mm x 320mm (D x W) Height: approx. 550mm Year of manufacture: 2016 Gjdpfx Ajyx A Smsp Dobu You are welcome to arrange a viewing. We can organise cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you have a valid VAT ID number. Sale subject to prior sale. Visit our shop to view more of our listings. The specified company names and trademarks are the property of their respective owners and are used for identification and product description purposes only. Deviations from technical data or errors in the item description may occur and are subject to change.

Condition: used, machine/vehicle number: MPK5000, functionality: unexamined, Used Neon invitrigen Transfection System with Pipette holder. Gbedpfx Apsxp I Ths Dju Manufacturer: Life Technologies Model: MPK5000 Voltage: 100-240V (50/60Hz)

Condition: used, This listing is for the Perkin Elmer Sciex Turbo Ion Spray Source The unit is in full working condition and is ready for immediate use What Is the PerkinElmer Sciex Turbo Ion Spray (Turbo V) Source? The Turbo V Ion Source (commonly referred to as Turbo Ion Spray Source) is a highly robust and efficient ionization module for LC‑MS/MS systems, originally developed by PerkinElmer and further advanced by SCIEX. Here's a breakdown of its key features and function: Ionization Modes Electrospray Ionization (ESI): Uses a TurboIonSpray® probe. High-voltage spray creates charged droplets, while two heated nitrogen gas jets—in an orthogonal configuration—enhance desolvation by intersecting the spray at ~90°, leading to efficient ion generation. Artisan Technology Group Atmospheric Pressure Chemical Ionization (APCI): Gbedpfx Ajxhfc Rjp Dsu Employs a different APCI probe. The sample is nebulized, vaporized via a heated ceramic tube, then ionized via a corona discharge near the orifice. Design and Performance Highlights Iconic orthogonal spray design with simplicity and durability. Uniform temperature distribution and optimized curtain gas flow contribute to its high ruggedness and low maintenance needs. Robustness & Productivity The design supports multi-day stability, with studies showing

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, input voltage: 240 V, type of input current: AC, Rudolph Technologies / Onto Innovation AXi 940 b Automatic Inline Wafer Inspection Tool Gjdewgm Eaepfx Ap Dobu Model: AXi940b Lamp Operating Hours:

Condition: used, Veolia Water System, Model - Orion 2000 Orion™ is a skid-mounted, multi-technology purified water production system. Gbodpfxsz Ic T Rj Ap Dju Offering softening, reverse osmosis and continuous electrodeionization (CEDI) technologies that can be fully or partially hot water sanitized. Ideal for use as a pharmaceutical water system for the generation of purified water. Orion is digitally-enabled to offer the ability to remotely monitor any parameters you want.

Condition: used, This listing is for 1 of 11 Invitrogen Powerease 500 Power Supply. The unit is in full working condition and is ready for immediate release. This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply Gbodpfxsxx Afks Ap Dju The unit is in full working condition and is ready for immediate release he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Weight: 2.9 kg (6.4 lbs) Features & Functionality Designed for Mini Gels: Optimized for use with mini gel electrophoresis setups. LCD Display: 240 × 128 pixel interface displaying real-time run data. Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels 4 user-defined custom methods Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Supports thermal shutoff with probe. Usage & Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.

Condition: good (used), functionality: fully functional, Year of construction: 2002, • 4 new EDI cells MK3 are available. • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled. Gedpfx Apswy Uu As Dobu

Condition: used, Year of construction: 2023, voltage 400V, 50Hz V current intensivity 40 A output 15 kw operating pressure 4,5 bar weight 1.600 kg Gbedpfxjzbvmhe Ap Dju In our assessment, the assembly system is in like-new condition. Technical features: - Assembly system for pressing individual parts into a battery cooling plate - Pressing process using pneumatic cylinders and servo motors - Pneumatic suction of the cooling plate - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: Gjdpfx Apozdz S Ts Dobu - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: U_H_1341, input voltage: 400 V, warranty duration: 6 months, total width: 1,150 mm, total length: 1,350 mm, total height: 1,900 mm, type of input current: DC, overall weight: 500 kg, year of last overhaul: 2026, Fully automatic dough dividing and rounding machine. Designed for dough with a tolerance range (TA) of 148-160. Key features of the machine: - Output: up to 10,000 pieces/hour, - Weight range: 28 - 85 grams, - Number of rows: 5, - Hydraulic system for the main piston, - Condition: like new (after general overhaul), - Hopper capacity: 50 liters, - Produces round products, - Made of stainless steel. Gbodpfx Apjz N A N Ns Deu

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: 2230832-269, Barbaric RTS 02 Professional reverse transfer system with destacking, year of manufacture 2023. Workpiece recirculation with 0 - 90 - 180 degree rotation, part measurement, destacking function including stack construction and manual mode for oversized panels. Composed of a removal station RX U4 B2200, conveyor belt L9000 B800, delivery station Comfort, movable table, dual function, steplessly adjustable conveyor belt, support rollers with double track, portal RTS 6100, safety fences and 2 safety light curtains. Largest part 2800 x 1300 mm, smallest 300 x 80 mm, maximum 60 kg. Pick-up with suction cups, up to 12 cycles per minute, transfer speed up to 120 m/min, stacking height 800 mm. Connection 400 V / 50 Hz, 20 A and compressed air 0.6 MPa. Gbjdpfxoz Ngg Ej Ap Deu

Year of construction: 2005, condition: ready for operation (used), A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible. Gbsdpfx Apsv Extze Dou

Condition: used, Nita hygiene station -Functions: sole cleaning and disinfection, hand disinfection -External dimensions: 2100 x 1210 x 1200 mm, 950 x 1200 x 1380 mm Gbedsz A Ru Sopfx Ap Deu -With two brushes -Brush dimensions: 940 x 150 mm (x2) -The gate opens automatically after disinfecting both hands -Easy to install -Stock quantity: 1 -Condition: Used in very good condition, ready to work

Condition: used, Nita hygiene station Gsdpfx Aez A Rurep Dsbu -Functions: shoe soles cleaning and disinfection, hand disinfection -External dimensions: 1780 x 930 x 1700 mm -With two brushes -Brush dimensions: 940 x 150 mm (x2) -The gate opens automatically after disinfecting both hands -Easy to install -Stock quantity: 1 -Condition: Used in very good condition, ready to work

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: HEB IPE section bending roll, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, shaft diameter: 200 mm, roller diameter: 650 mm, bending radius (max.): 1,000 mm, pipe diameter (max.): 250 mm, overall weight: 27,000 kg, input voltage: 3,80,440 V, input frequency: 5,060 Hz, Equipment: CE marking, documentation/manual, emergency stop, hardened rollers, Profile bending roll hydraulic model AR200, year 2008 make MG Italy Capacity bending chart and photos in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. -electric 30 Kw on the hydraulic power unit- voltage 380/50 Gjdpfx Aoz Dkr Hsp Debu -Digital position readout on the bending rolls -Manuals and schematics all available along with the machine. -Machine delivered in working condition. CAPACITY CHART IN ENCLOSED MG MODEL AR200 SECTION BENDING ROLL

Condition: used, Year of construction: 2020, functionality: fully functional, total height: 900 mm, total length: 3,000 mm, total width: 1,500 mm, overall weight: 1,028 kg, Siegmund Welding Table Professional 750, Plasma-nitrided Size: 3000 x 1500 x 150 mm System 22 mm with diagonal grid and scale with base, standard version, 700 mm Gbsdpsz Dpwnjfx Ap Dou Only the table is for sale, without any accessories.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2013.11.293, overall weight: 8,000 kg, HEESEMANN MFA IMPRESSION 2013 WIDE BELT SANDER – JBS Industrial wide belt sander HEESEMANN MFA Impression from 2013, manufactured in Germany. The machine is designed for sanding wood surfaces and wood-based materials. It is a solution for carpentry workshops, furniture manufacturers, door manufacturers, and manufacturers of finishing elements. Through-feed material transport and roller tables on the infeed and outfeed sides facilitate the handling of large parts. The operator panel with a screen enables control of the machine's operation, and side doors provide access to the sanding units. TECHNICAL DATA: – brand: HEESEMANN, – model: MFA Impression, – manufacturer: Karl Heesemann Maschinenfabrik GmbH & Co. KG, – year of manufacture: 2013, – country of manufacture: Germany, – machine number: 2013.11.293, – operating voltage: 400 V, – frequency: 50 Hz, – total power according to the nameplate: 97 kW, – rated current: 205 A, – control voltage: 24 V DC / 230 V AC, – total weight: 8000 kg, – CE marking. EQUIPMENT: – operator panel with screen, – belt conveyor, – infeed roller table, – outfeed roller table, Godpfx Apoz Rnugj Dsbu – sanding units with separate drives, – CSD pressure system marking, – connections for dust extraction system, – pneumatic elements with a pressure gauge, – emergency stop buttons, – side access doors to the units. Transportation to the specified address can be arranged for an additional fee. Please contact us for more information. We invite you to contact us and view our other listings. WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, Year of construction: 2015, functionality: fully functional, power: 38 kW (51.67 HP), • Year of manufacture: 2015 • Max. log diameter: 1.5 m • Automatic, hydraulic belt tensioning Gbsdjzl Stwspfx Ap Dju • Automatic pre-cutter • Automatic board guiding system • Max. log length: 8 m • 8 hydraulic clamps • 3 log turning devices with left-right positioning • Automatic control • Automatic lifting belt conveyor for boards • Dust extraction system • 38 kW motor • Price: 35,000 euros

Condition: used, Year of construction: 2011, operating hours: 5,051 h, functionality: fully functional, machine/vehicle number: 20, travel distance X-axis: 730 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 800 mm, controller model: PRO 5, spindle speed (max.): 14,000 rpm, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Makino A61nx, 4-axis horizontal machining center, fully functional and can be inspected while powered on. 11,324 hours of power-on time 5,051 hours of operating/runtime 3,253 hours of machining time 4,188 hours of spindle runtime Gbjdezw Dzdspfx Ap Deu A Travels  X-axis travel (frame) ..... 730 mm  Y-axis travel (spindle) ..... 650 mm  Z-axis travel (table) ..... 800 mm  Distance from pallet surface to spindle center ..... 80 ~ 730 mm  Distance from pallet center to spindle nose ..... 100 ~ 900 mm  Linear guides, heavy-duty design, size (roller bearing) ..... #55  Size of ball screws (X, Y-axis / Z-axis) ..... #45 / #50 B NC rotary table (DD motor) C1 Spindle 14,000 rpm (240 Nm)  Tool holder ..... HSK-A63 D Feed drives  Rapid traverse speed ..... 60,000 mm/min  Feed speed ..... 1 ~ 50,000 mm/min  Feed speed (jog mode) ..... 1 ~ 8,000 mm/min Tool magazine  Storage capacity ..... 60 tools  Maximum tool diameter with space allocation ..... 170 mm  Maximum tool diameter without restrictions ..... 70 mm  Maximum tool length ..... 510 mm  Maximum tool weight ..... 12 kg Tool change time increases for tool weights over 8 kg.  Maximum imbalance relative to the gripper groove ..... 11.7 Nm  Maximum total weight of all tools in the magazine ..... 180 kg  Tool-to-tool change time (without door movement) ..... 0.9 s  Chip-to-chip time (ISO method) ..... 2.8 s  Tool ready time in the magazine (min./max.) ..... 3.1 / 6.1 s Drives  Main drive ..... AC15 kW  Feed drives (XYZ axes) ..... AC4 kW  Table (indexing table) ..... AC0.9 kW

Year of construction: 2013, condition: used, This listing is for Agilent Technologies 2200 Tapestation The unit is in full working condition and ready for immediate use This automated electrophoresis system provides rapid, scalable analysis of DNA, RNA, and proteins. It accelerates sample quality control workflows using minimal sample volumes Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Gbjdozgfpnepfx Ap Dju Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: excellent (used), Year of construction: 2017, Ref:11159 . 2017 GP2 Technologies SC3-31 Autocase Fully integrated automatic case making system designed for hardcover and rigid case production with minimal manual input. Process: The operator places the cover material onto the G‑2 gluer, which automatically feeds it and applies adhesive, then positions the boards and spine onto the glued cover. The SC‑3 system then takes over, automatically feeding the case inward, trimming corners, wrapping and folding each side, and pressing the boards to the case material. All functions are controlled via a touchscreen interface, providing intuitive setup and consistent results. Features: Fully automatic case making with minimal operator intervention. Godpfx Aoz H Rgvjp Dsbu G‑2 Gluer with Automatic Viscosity Control for consistent adhesive application. Automated corner trimming and side wrapping for clean finished cases. Integrated pressing system for accurate board bonding. Tablet touchscreen for centralized control and streamlined operation. Reliable, repeatable case alignment and finish quality. Specification: Case Size Range: Height: 168.1–406.4 mm Width: 218.9–660.4 mm (up to 711.2 mm without corner trimmer option) Board Thickness: 1.52–3.18 mm (padded board up to ≈6.35 mm) Spine Width: 6.35–82.55 mm Operating Speed: Up to 300 cycles per hour.