Used Lmi Technologies Gmbh Measuring System for sale (95,102)

Condition: like new (used), Year of construction: 2019, functionality: fully functional, type of input current: AC, input voltage: 240 V, measuring range X-axis: 2 mm, measuring range Y-axis: 1 mm, measuring range Z-axis: 1 mm, Microscopic 3D inspection scanner with measurement envelope of 1.6 x 1.2 x 0.8mm, height resolution 0.1 µm. The unit can take linear measurement in 3 dimensions and also measure edge radius between approximately 5µm and 100µm. It is complete with laptop loaded with the necessary software, dongle, and microscope stand. It has only been lightly used. Laptop: Dell with Windows 10 Bdjdjy Int Uepfx Adreb

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 Bdodpou Hl R Tsfx Adrob MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: used, Year of construction: 2004, Technical details: voltage: 400 V / Hz total power requirement: 0,37 kW weight of the machine approx.: 360 kg dimension machine xH: L:2,7 x B: 0,7 x H: 2,0 m Scraper belt conveyor combined with cooling water system and torque shut-off Discharge length D=280mm Chip infeed width F=325mm Insertion height B=approx. 160mm Insertion height B+I=220mm Chip infeed width F1=300mm Chip infeed length=700mm Floor clearance I=60mm Discharge height above floor C+I=950mm Equipment 2x support feet Bdjdpev N Ekbjfx Adrob *

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036679, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 6,00,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base-level injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, simple operation, and short lead times. The machine is suitable for a wide range of applications, including the packaging, electrical and electronics, medical technology, and automotive industries. Your benefits: – Optimised price-performance ratio for a broad array of applications – High energy efficiency thanks to all-electric machine concept – Fast delivery times thanks to base machine concept with a wide range of available options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year of manufacture 2013) CONTROL SYSTEM • MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT • Clamping force: 1,600 kN • Maximum mould opening force: 120 kN • Daylight (h x v): 570 x 520 mm • Platen size (h x v): 770 x 720 mm • Mould height min.–max.: 200 - 500 mm • Maximum opening distance: 950 mm • Maximum mould opening stroke: 450 mm • Ejector drive: electric • Ejector stroke: 100 mm • Ejector force forward/backward: 33 / 33 kN • Ejector speed forward/backward: 300 / 300 mm/s • Max. mould weight: 1,200 kg INJECTION UNIT • Screw diameter / type: 50 mm / standard • Effective L/D ratio: 20.2 • Injection pressure: 1,892 bar • Shot volume: 393 cm³ • Shot weight at max. stroke for PS: 358 g • Injection speed: 200 mm/s • Injection flow rate: 393 cm³/s • Screw drive/speed: 267 rpm • Plasticizing rate (standard screw): 36.5 g/s • Nozzle contact force: 42 kN ELECTRICAL PARAMETERS • Connected load: 31.2 kW • Installed heating capacity: 15.5 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 9.7 t • Length x Width x Height: 5.65 x 1.82 x 1.95 m Bsdjyzz Irepfx Adrsdb ADDITIONAL EQUIPMENT • Wear-resistant plasticizing • BluePower full insulation of plastification cylinder • Open nozzle • 1-fold air valve (BWAP) • Pneumatic control for hot runner shut-off 1-fold • Electrical interface for pneumatic cascade 4-fold • Euromap interface for handling E18 + E67 • Euromap interface (central computer) E67, E77 • 4-way water manifold • Electrical pre-equipment for hydraulic auxiliary unit • Automatic central lubrication system • Adaptive Process Control (APC) • Injection compression moulding function • Graphic analysis package • Swivelling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts Bdjdpfx Ajgd D U Ejdrob - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Slide width 300 mm Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Insertion width threaded mounts for adjustable feet 410 mm Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Conveyor speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition Bdedpfxsi Huzxo Adrsb

Condition: used, Used stainless steel container / transport container / IBC Last use: Solvent Item number: 10848 Volume: 800 liters Type: Vertical in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Manhole 400mm Design: Single-walled Bdedpfou Ngqtex Adrsb Operating pressure according to type plate: 0.10 bar Empty weight: 213 kg Tank dimensions: Total width: 1020mm Total length: 1220mm Total height: 1400mm Height of the feet: 100mm Materials: Interior: 1.4301 / AISI 304 External parts: Galvanized steel Equipment: Type plate: yes Outlet diameter: 40mm Outlet valve: ball valve Distance drain to floor: 265mm

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 6,00,000 g, Injection molding machines direct from the manufacturer! Bodpsud H Dmjfx Adrodb As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 10,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0 Bsdjud N Hdepfx Adredb  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 6,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400 Bdodpfxeuggb Ds Adrjb  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 22,00,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm Bedjw U N Ixjpfx Adrjdb - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Year of construction: 2016, operating hours: 700 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 88-16-4043, Sigmet 2000V high vacuum coating machine The system overdamps even the most complex 3D molded metal, glass or plastic parts with aluminum while producing an accurate, precise and homogeneous surface with a captivating appearance. Total operating time of the machine: 700h Features: -Double door for high productivity -Precise drive system -Planetary drive for uniform coating -Vertical arrangement of the substrate holders -Modular and flexible design -Glow pre-treatment by AC or DC -Glow pre-treatment by MF (40kHz) Typical applications -automotive industry interior/exterior Bodsuz Rcwjpfx Adrsdb -Cosmetics -Household and furniture -Glass and bottles -General decoration -lighting

Year of construction: 2024, condition: like new (used), functionality: fully functional, System Overview Complete modular chamber furnace system for batch homogenising of aluminium extrusion billets, electrically heated with jet-heating, waste-heat recovery, and full automation. CE-certified (Machinery Directive 2006/42/EG). Scope of supply: 1× Preheating furnace (BSN 1607) — electric, jet-heating 2× Holding furnaces (BSN 1608, 1609) — electric, forced air circulation 2× Heat-exchanger furnaces (BSN 1610, 1611) — unheated, forced air circulation 1× Charging machine (BSN 1612) — electric/hydraulic 12× Charging racks (BSN 1614) Control cabinet with Siemens S7-1515F 2PN (Profinet) PLC and operator panel Pusher thermocouples for direct billet temperature measurement Key technical advantages: Jet-heating for fast, uniform billet heating (typically 3–4× faster than conventional convection furnaces) Bdodpfjyuvq Tsx Adrjb Integrated heat-exchanger furnaces for efficient waste-heat recovery — reduced energy consumption and operating costs Overtemperature operation possible — shorter cycle times with direct billet temperature monitoring Suitable for homogenisation and/or solution heat treatment / ageing Modular design — suitable for new installations and retrofits of existing lines Ideal for: Aluminium extrusion plants and casthouses seeking to optimise energy consumption, CO₂ footprint, and throughput. Further technical details available upon request (PDF with full specifications).

Condition: used, Year of construction: 2016, functionality: not functional, machine/vehicle number: 3752, Technical characteristics: Measurement Capabilities - Traversing length (X-axis): 0.2 mm to 120 mm - Measuring range (Z-axis): 50 mm - Resolution (Z-axis): * Relative to stylus tip: 0.38 µm (with 350 mm probe arm), 0.19 µm (with 175 mm probe arm) * Relative to measuring system: 0.04 µm - Guide deviation: < 1 µm over 120 mm - Measuring force (Z-axis): Adjustable from 1 mN to 120 mN - Tracing angle: Up to 88° trailing edges, 77° rising edges Performance & Speed - Measuring speed (X-axis): 0.2 to 4 mm/s - Contacting speed (Z-axis): 0.1 to 1 mm/s - Positioning speed: * X-axis: 0.2 to 8 mm/s * Z-axis: 0.2 to 10 mm/s Bedexx R Tpepfx Adrodb Stylus & Probe - Probe arm lengths: 175 mm or 350 mm - Stylus tip radius: 25 µm - Stylus exchange: Magnetic mount for tool-free swapping - Calibration: Individual stylus data stored for rapid setup System & Software - Control unit: MidRange Standard PC with MarWin-based XC2 software - User interface: Touchscreen with intuitive icons and Quick & Easy programming - Evaluation features: * Regression lines, circles, points, radii, angles, coordinates * Nominal/actual comparison * DXF import (optional) * Tolerance monitoring * Automatic program runs Included Components: - CD 120 drive unit - ST 500 measuring stand with granite plate (700 × 550 mm) - MCP 23 manual control panel - CT 120 XY table with rotary adjustment - Calibration set - 17" TFT monitor Machine status: NOT WORKING – License key lost, requires new reboot with license key.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 3286, Technical characteristics: Measurement Capabilities - Traversing length (X-axis): 0.2 mm to 120 mm - Measuring range (Z-axis): 50 mm - Resolution (Z-axis): - Relative to stylus tip: 0.38 µm (with 350 mm probe arm), 0.19 µm (with 175 mm probe arm) - Relative to measuring system: 0.04 µm - Guide deviation: < 1 µm over 120 mm - Measuring force (Z-axis): Adjustable from 1 mN to 120 mN - Tracing angle: Up to 88° trailing edges, 77° rising edges Performance & Speed - Measuring speed (X-axis): 0.2 to 4 mm/s - Contact speed (Z-axis): 0.1 to 1 mm/s - Positioning speed: - X-axis: 0.2 to 8 mm/s - Z-axis: 0.2 to 10 mm/s Stylus & Probe - Probe arm lengths: 175 mm or 350 mm - Stylus tip radius: 25 µm - Stylus exchange: Magnetic mounting for tool-free changeover - Calibration: Stored stylus-specific data for quick setup System & Software - Control unit: MidRange Standard PC with MarWin-based XC2 software Bjdjxx R I Hjpfx Adrodb - User interface: Touchscreen with intuitive icon navigation and Quick & Easy programming - Evaluation capabilities: - Regression lines, circles, points, radii, angles, coordinates - Nominal/actual comparison - DXF import (optional) - Tolerance monitoring - Automatic program runs Included Components: - CD 120 drive unit - ST 500 measuring stand with granite plate (700 × 550 mm) - MCP 23 manual control panel - CT 120 XY table with rotary adjustment - Calibration kit - 17" TFT monitor Machine status: Operational

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: SAA81E9S0112721, Technical characteristics: System Components - XR1 Evaluation Unit: PC-based system with MarWin software - SD26 Drive Unit: Skidless tracing system with motorized height adjustment - ST-G Measuring Stand: Granite base (500 × 300 mm) with manual column adjustment Measurement Capabilities - Tracing length: 1.75 mm, 5.6 mm, 17.5 mm (DIN/ISO); 1–16 mm (ISO 12085) - Tracing speed: 0.2 mm/s or 1 mm/s - Positioning speed (X-axis): 5 mm/s - Height adjustment (Z-axis): 7.5 mm motorized - Positioning speed (Z-axis): 2 mm/s - Measuring range: ±250 µm (±500 µm with extended probe arm) - Probe force: ~0.7 mN Probe System: BFW 250 (skidless, magnetic mount for fast change) Software & Evaluation - Supported parameters: R, P, W, Motif, D profiles - Standards: ISO, JIS, MOTIF (ISO 12085) - Features: - Over 80 surface parameters - Automatic cutoff and measuring path selection - Quick & easy measuring programs - PDF report generation - ASCII export and USB data transfer - Multi-user levels and calibration reminders Hardware & Interface Bodpfx Aoxx R Rnodrjdb - PC: All-in-one or industrial PC (optional) - Connectivity: USB and Bluetooth (for drive unit) - Display: Touchscreen interface with intuitive icons Accessories: - CT 120 cross table - Calibration set - Magnetic probe arm holder - Optional contour evaluation module Machine status: WORKING

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 10110710, Technical characteristics: # Measurement capacity [mm]: Diameter 0.2 to 50 / Length 300 # Maximum workpiece size: Diameter 150 / Length 300 / Weight 10 Kg # Resolution: Diameter 0.1μm / Length 0.1μm / Rotation 0.018˚ # Precision: Diameter (2+D[mm]/100)μm / Length (5+L[mm]/100)μm # Repeatability: Diameter 0.5μm / Length 3μm Dimensions # Measuring system: 780*650*912 # Installation surface [m]: 0.8x0.8 # Weight: 145 Kg # Clamping type: Morse Taper MK2 / Travelling head tension length 20 mm IT system: Windows XP Professional Bsdpjxxvpvjfx Adrjdb Electrical Equipment # Operating voltage: 230/115V # Connected load: 1.5 kVA / 16 A

Condition: excellent (used), For sale: Professional digital height gauge Mitutoyo (model 192-613) – Japanese precision and reliability in a single device. Ideal for workshops, quality control, and precise measurements. Specification: • Measuring range: 0–300 mm • LCD display – clear readings even in low light • Functions: ZERO/ABS, PRESET, HOLD • Power supply: CR2032 battery • Stable base ensuring secure support and accurate measurement • Original – Made in Japan Bdsdpfxsw N Hn So Adrsb Condition: Device is fully functional and well maintained,

Condition: used, Dear Sir or Madam, We are pleased to offer the following equipment for sale: Keyence VL-500 measuring system. Bedsy Iaa Tjpfx Adrjdb The machine is sold with the equipment shown in the photos and listed in the advertisement text. Location: 40764 Langenfeld PLEASE NOTE! The equipment originates from an insolvency. We are auctioning this off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information regarding the current highest bid. Your bid becomes binding upon receipt by email. Please submit your binding bid by 10:00 am on 13 May 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: used, Year of construction: 1990, Zoller H520/019 – tool measuring machine – optical projector for precise inspection of cutting tools. Rotary table (~760 mm), digital readout, robust industrial construction. Used, fully functional, ready for operation. Bdodpjy Hl I Tsfx Adrob

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Y5061080272, total width: 500 mm, total length: 600 mm, total height: 600 mm, overall weight: 20 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Lens diameter: 120 mm MACHINE DETAILS Bdjdsy D R D Uepfx Adreb Dimensions & Weight Dimensions (L x W x H): 600 x 500 x 600 mm Machine weight: 20 kg External reference: 58

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23352279, type of input current: three-phase, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 460 kg, power: 5.5 kW (7.48 HP), compressed air connection: 6 bar, Equipment: documentation/manual, type plate available, SICK MCS 100FT/F CEMS System (2023) - Unused / Zero Hours - QAL1 Certified Available for immediate sale: A complete, unused (zero hours) Continuous Emission Monitoring System (CEMS) SICK MCS 100FT/F, manufactured in October 2023. This is a turn-key solution featuring advanced multi-component analysis technology. Key Technical Specifications: - FTIR Technology: Simultaneous measurement of SO2, NO, NO2, CO, CO2, HCl, HF, and H2O - FID (TOC) Analyzer: Integrated total organic carbon measurement - Zirconia Sensor: Integrated O2 measurement - Certification: Fully QAL1 certified (EN 15267 compliant) - Acid Mist Protection: Includes special cabinet with Acid Mist Absorber Box (ideal for H2SO4 protection during petcoke combustion) Complete Package Includes: - SICK MCS 100FT/F Analyzer Cabinet - Sampling Probe - 20m Heated Sampling Line - MEAC/DAU Data Acquisition System Bdjdpey A Nu Asfx Adrjb Condition: Brand New / Unused Availability: Immediate (Ex-stock) Ideal for cement and lime plants, refineries, and power generation facilities looking for a high-end upgrade without the manufacturer's lead time. FAT reports and technical manuals are available upon request.

Condition: excellent (used), Year of construction: 2014, 3D measuring macroscope Controller VR 3000K Measuring head VR 3100 Measuring range 24 x 18 x 10 mm Measuring diagonal 30 mm Magnification 12x – 160x Resolution 0.1 µm Bedpjy Ayntjfx Adredb Automatic edge detection

Condition: excellent (used), Year of construction: 2010, 1" image sensor, 6.6 megapixels, CMOS Double telecentric lens Z-axis travel distance 30 mm Bodpoy Aym Ajfx Adredb Z-stage maximum load 3 kg

Condition: used, Year of construction: 2013, machine/vehicle number: 2690/07, Mahr Perthometer PGK 120 Measuring range: 100 [x in mm] Max. load capacity: 10 kg with cross table Bdsdpsy D Eadjfx Adrjb Probe system: MFW-250 (measuring range: in z ±0.25 mm) Measuring principle: tactile-inductive Contact forces: 1–3 mN Probe: roughness probe (tip radius 2–5 µm, opening angle 60° and 90°)