Used Lorenz Msm for sale (131)

Condition: used, Year of construction: 1982, x-travel 0 mm y-travel 0 mm table length 600 mm table width 400 mm Crsdpfx Apjt Hwr Uoteg total power requirement 2 kW weight of the machine ca. 1500 kg

Condition: used, max. wheel diameter 500 mm gear width 75 mm max. module 5 min. module 0,5 Csdpozw N E Usfx Aptorg no. of strokes 45 - 424 Hub/min total power requirement 6 kW weight of the machine ca. 3,6 t dimensions of the machine ca. 2,0 x 1,4 x 2,3 m Rapid traverse in the table. Change gears, toolholders, manuals.

Condition: used, Year of construction: 1979, max. wheel diameter 420 mm gear width 120 mm max. module 7 mm min. module 0,5 gear hobbing diameter - external 420 mm gear hobbing diameter - internal 370 mm table diameter 400 mm boring diameter 125 mm Codpfezv Ulqox Apterg spindle stroke 120 mm stroke position adjustment 230 mm strokes - infinitely variable 30 / 800 Hub/min depth feed stepless 0,016 - 0,063 mm/Hub total power requirement 35 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 2,46 x 3,48 x 2,66 m Accessories: - Various replacement wheels and blade holders - Documentation

Condition: like new (used), number 1 Stück LIEBHERR/LORENZ disc cutting wheel Modul 4 - EW 30° - Zähne 12 - DIN 5480 - new Crsdpfx Apjzupmaetsg

Condition: like new (used), number 1 Stück LORENZ disc cutting wheel HM: HB10 - F Z2/Z0= 15/60 Codpfx Aezupl Aspterg 14 - 44C 46 711/1 mn3.08 an21° z60

Condition: good (used), Year of construction: 1965, max. wheel diameter 900 mm max. module 6,5 stroke up to 150 mm table diameter 900 mm table hole 360 mm weight 3,7 t External: max. diameter 900 mm Max. gear width 150 mm Crodpfx Apeywnt Tetog Internal: Max. diameter 630 mm Max. gear width 150 mm Spindle bore table 360 mm Table diameter Ø 900 mm Module 6.5 mm Length 2500 mm Width 2300 mm Height 2600 mm Weight 4100 kg

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm y-travel 560 mm gear width 180 mm max. module 8 min. module 1 workpiece dia. 750 mm table diameter 450 mm Crsdpfxsyb Sx Te Aptsg draw-in arbor diameter 58 mm spindle stroke 200 mm adjustment range 230 mm distance between table/spindle 225-450 mm taper Morse 4 down feeds 0,03 mm/Hub roll feed 10n: 0,18-0,74 mm/Hub no. of strokes 12n: 47-300 Hub/min electrics - voltage/frequency 380/50 V/Hz weight of the machine ca. 5500 kg The machine was raised by 100 mm.

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm Crsdpfxeu Uu S Tj Apteg table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg Year of construction: Approx. 1970

Condition: used, Year of construction: 2001, sheet width 1650 mm plate thickness 0,5- 3 mm Crodszafi Nopfx Aptsg number of rolls 21 straightening feed 0- 60 m/min straightening roll diameter 50 mm adjustment 30 mm weight of the machine ca. 24,5 t dimensions of the machine ca. 4,5x 2 x 2,8 m voltage 400 V passage width 1720 mm number of support rolls 18 main drive motor 45 kW run-in height 1250 mm 6 HI High-performance straightening machine with 21 rolls for fine straightening work of steel or non-ferrous metals. Machine has 23 intermediate rolls and 18 support points. Working rolls are adjustable with DRO in 0,01 mm. Main Gearbox was renewed in 2021.

Condition: used, Year of construction: 1997, material width 820 mm coil weight 7,5 t material thickness 0,8 - 5,0 mm coil internal diameter 470 - 520 mm coil external diameter 1600 mm material cross-cut 1600 mm² no. of straightening rolls 7 straightening roll diameter 50 mm number of draw-in rolls 2 speed 0 - 40 m/min Csdpfxozrpp Aj Apterg Decoiler HH 7500.1 with: - hydraulic expansion and automatic re-tensioning - material centre adjustment - adjustable pneumatic disc brake - counter-holder with quick clamping - circular guard ring - fixed coil loading chair Insertion aid consisting of: - snubber roll (driven) - infeed wedge - hold-down roll Straightening machine BRM 50/820.7 with: - automatic circular oil lubrication of the cardan shafts - torque-dependent overload protection - motoric roller cassette adjustment with digital display - quick-change device of the cardan shafts - quick-change device of the straightening rolls Transfer table + ultrasonic control BÜU-5 with: - loop control via ultrasonic sensor (analogue) - strip sag monitoring (min/max) - strip end monitoring

Condition: ready for operation (used), The WS 1250 CNC gear shaping machine features a configuration comparable to the Lorenz LS 1000 or LS 1250 models, is designed as a universal machine, and is employed by manufacturers of gears and transmission technologies for the process of gear shaping. Technical Data Diameter: 1250 mm Module: 12 mm Face width: 210 mm Dimensions: 3,750 x 2,500 x 3,600 mm Machine weight: approx. 19,000 kg *All details and data are non-binding. Subject to prior sale. Special Features: Csdpfx Asyw Hxnopterg The machine is equipped with a digital CNC control by Siemens type 840 D, as well as digital servo motors and drive amplifiers. The control cabinet is air-conditioned. Sinumerik 840 D: PCU 50, 566 MHz, 256 MB RAM, NCU 572.4, 3-axis/spindle, NC memory 2.5 MB, PLC memory 96 KB, 19” flat operating panel OP 10 C, 10.4” flat screen, electronic handwheel for linear axes, diagnostic system for error messages, warnings, and informational texts.

Condition: ready for operation (used), Equipment: documentation/manual, Lieberr - Lorenz S800 / Gear Hobbing Machine -Well-maintained machine with extensive accessories -1 pallet / Change gears -1 pallet / Hobbing cutters -1 pallet / Clamping arbors DOCUMENTATION -Max. workpiece length with counter support 600mm -Max. workpiece length with retracted counter support 800mm -Max. travel of the milling slide 360mm -Largest millable pitch with the largest workpiece 5 PI / Normally 8 PI -Taper for spindle - Milling spindle MK 5 -Milling arbors / 22 / 27 / 32 / 40 mm -Max. cutter diameter 186mm -Max. cutter length 170mm -Max. cutter feed 80mm -Cutter speeds 40 - 220 rpm -Feeds infinitely adjustable / Horizontal -Feeds infinitely adjustable / Vertical -Feeds infinitely adjustable / Tangential -Clamping table without water trough 550mm -Clamping table bore 100mm -Clamping arbor taper MK 4 Dimensions: L x W x H 3.6 x 1.8 x 1.9 meters / Weight: 5000 kg Errors and omissions excepted. Codszv Ed Dopfx Apterg

Condition: excellent (used), max. wheel diameter 300 / 400 mm gear width 76 mm max. module 6 min. module 0,5 Crsdpfxszq Hmce Aptog Control BWO CNC 921 adjustment of stroke position 94 mm/Hub stroke 82 mm no. of strokes 75 - 1000 Hub/min number of teeth 5 - 200 taper of shaper cutter SK 45 table diameter 400 mm total power requirement 50 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 5,0 x 3,8 x 3,4 m Machine in top condition.

Year of construction: 2021, condition: ready for operation (used), An automatic Lorenz filter test station for the automatic testing of filter media, half masks, canister filters, and medical face masks is available. Standards: EN143/EN149/EN14683/ISO16900-3 and more, module components: flow meter/photometer upstream and downstream of the test specimen/aerosol generator/suction and extraction unit, aerosols: paraffin oil/Emery oil/DOP/DEHS, volume flow range: 8L-300L/min, min. separation efficiency measuring range: 0.0001%, min. breathing resistance measuring range: 5Pa-1000Pa, max. filter air velocity: 10.2cm/s, max. test area: 237.8cm³. The device has been used little and would not need to be serviced. Documentation available. An on-site inspection is possible. The image is an example. Codpfx Aey Tx Slspterg

Condition: used, Year of construction: 1998, machine/vehicle number: 000373, Comm. no.: Lg 34723 Double decoiler LORENZ HH 2000.2 Used, in good condition year of construction 1998 - machine no. 000373 with - hydraulic spreading and automatic retensioning - belt center adjustment manually via spindle - counterholder with quick clamping - circular protection ring - easily exchangeable clamping cylinder (service-friendly) - manual swiveling - direction of rotation changeover (top-bottom unwinding) load capacity max. 2.000 kg/side strip width max. 300 mm Coil inner diameter approx. 360 to 420 Coil inner diameter approx. 460 to 520 mm Coil outer diameter max. 1,800 mm Crsdpfjnbdyasx Aptog with drive via three-phase geared motor and pneu. brake. drive power approx. 2.2 KW/side Unwinding speed approx. max. 40 m/min. Coil limitation via fixed limiting ring at the rear and adjustable counterholder (with quick clamping) at the front. Coiler stand with base frame with lateral shifting for coil center positioning. Currently without electric control. Can be re-engineered and offered on request.

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single-sided unwinding reel ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Spreader: hydraulically operated Presser arm: hydraulically operated Take-up reel with auxiliary drive and brake Coil loading table, fixed + reel traversing device including: Lg 33221 High-performance strip straightening machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no. 001669 Maximum pass width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multiply supported to prevent deflection. Drive for all rollers via a distributor gearbox and universal joints. Crjdpfohigmbex Apteg Used, as is, ex warehouse, immediately available. Overhaul possible upon request. Delivery time upon agreement. Further data will be available shortly or upon request.

Condition: used, Year of construction: 1974, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7 t L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _____ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 Cjdpfxet Hww Do Aptjrg No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.

Condition: used, Year of construction: 1977, max. wheel diameter 400 mm gear width 280 mm max. module 1 min. module 4 total power requirement 15 kW Crjdpfx Ast Hw Hxsptsg weight of the machine ca. 6000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1973, max. wheel diameter 400 mm gear width 75 mm Crsdpfxjt Hw Hle Aptsg total power requirement 25 kW weight of the machine ca. 7000 kg

Condition: used, Flow meter, vibration measurement, display device vibration measurement, monitor display -Manufacturer: Lorenz, measuring amplifier Csdpef Tdtrsfx Aptsrg -Type: GM40 -Price: per piece -Number: 5 piece -Dimensions: 75/20/H110 mm -Weight: 0.1 kg/piece

Condition: good (used), Force measuring device, force measuring instrument, calibration, force measurement technology, load cell, tensile force measuring bearing, force sensor, tensile and compressive force sensor Csdpfxsg Sxyvs Aptjrg -Manufacturer: Lorenz, 4 pieces tension and compression force sensor with Durbal, rod end spherical bearing -Sensor: Lorenz Type K-12 -Measuring range: - 100 kN -Sensitivity: 1.000mV/V / 0.999mV/V / 1.001mV/V -Swivel bearing: Durbal EF 35-20-501 -Dimensions of the articulated rod: 445 to 530 x 81 x 65 mm -Fork head: Bore Ø 35 mm -Number: 3 boxes available, sensitivity as shown in photos -Price: per box -Box dimensions: 590/390/H200 mm -Weight: 30.2 kg/box

Condition: used, Technical data: - Manufacturer Leif & Lorenz - Working width max. 1,200 mm - Brush diameter *160 mm - Suction connection D100 mm - Year of manufacture 2005 - Motor power 0.37 kW - Location, in stock in Blomberg - Also available for assembly with roller Credpfxjzf N Ekj Aptjg or belt conveyor

Condition: excellent (used), Year of construction: 2005, MSM dryer (6-9) Model SD65, 2800W, with moisture regenerator, molecular sieves, with plastic intake, 2005 Csdpfxjyznz Ss Aptorg

Condition: good (used), max. ram stroke 230 mm Csdpow Ny S Refx Apterg throat 230 mm table diameter 0 mm are offered : 2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 1250 1x overhauled new 1x has to be overhauled. Year of manufacture: unknown

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW Cjdpetycg Sofx Aptorg weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981