Used Lubeca Can Filling And Can Seaming Line Lw792 And Lw303 for sale (39,623)

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Diameter range: 50 - 160 mm Height range: 65 - 300 mm Fpedstqmwgjpfx Ap Dsn Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Lubeca LW792 can filler Lubeca LW303 can seamer

Condition: ready for operation (used), Can diameter range: 50 mm - 100 mm Can height range: 28mm - 120mm Capacity: up to 200 cans per minute Tooling for approx.: 73mm No. or seaming heads: 6 No. of filling pistons: 16 Single knive member separator Fodpownriajfx Ap Dopn Driven lifters Siemens touchscreen

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Fodoz Imu Sjpfx Ap Dspn Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Condition: like new (used), JBT Automatic Can Seamer with 48-Piston Filling Unit – Stainless Steel JBT automatic can seamer with a 48-piston filling unit, designed to integrate product dispensing and hermetic can sealing operations within high-production industrial packaging lines. The unit incorporates a 48-piston filling system, enabling continuous and synchronized dispensing before transferring the containers to the sealing section. Its configuration is specifically designed for installations requiring high production speeds, consistent filling, and reliable container sealing. Fpsdpfjzbi Nisx Ap Den The machine features a robust industrial design primarily in stainless steel, with a fully enclosed and protected work area to ensure safety during production. MAIN FEATURES -Manufacturer: JBT -Type: Filling + automatic can seamer -Filling unit: 48 pistons -Rotary filling system -Automatic and continuous dispensing -Automatic can feed -Synchronized transfer between filling and sealing -Automatic cap feed/positioning system -Mechanical hermetic can sealing -Continuous industrial operation -Designed for high-production lines -Construction primarily in stainless steel -Complete enclosure of the work area -Access doors with inspection windows -Safety guards -Automatic lubrication/service system, depending on configuration -Integrable into complete filling and canning lines PROCESS Empty cans automatically enter the machine and are transferred to the rotary 48-piston filling unit. During their movement, the pistons perform controlled dispensing of the product into each container, providing a repetitive process suitable for continuous production. Once filled, the cans are synchronously transferred to the sealing section. The lid is positioned on the container, and the sealing system performs the mechanical seaming between the can body and the lid, resulting in a hermetically sealed container. The cans can then continue to: Can washers Inspection systems Weight checkers Detectors Autoclaves/retorts Pasteurizers Cooling systems Labeling machines Case packers Palletizers APPLICATIONS Particularly suitable for canneries and industrial food manufacturers who need to integrate filling and sealing in a high-capacity automatic line. Depending on the configuration, format, and dispensing system installed, it can be used for different food products packaged in cans, including products with liquid or semi-liquid components and other formulations compatible with the filling system. The JBT 48-piston unit is especially attractive for installations seeking high production capacity and simultaneous dispensing of multiple containers, immediately followed by automatic sealing. Machine available for inspection. Additional technical information, can formats, capacities, production speed, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2022, A complete can filling and packaging line with can feeding, lid feeding, filling, sealing, capping, labeling and banding is available, 1) feeding system, with two format-adjustable rotary tables for the separate feeding of empty cans and lids, 2) REX EVF 327 vacuum filler, year of manufacture: 2017, 3) Fillpack R01-TI filling and closing machine, format: 75-400ml, year of manufacture: 2022, for filling, positioning and sealing the sealing foil as a tamper-evident seal, placing and screwing on the lid, 4) CDA NINON labeling system, year of manufacture: 2021, for lid, wrap-around and body labeling, 5) Garvens BF 8 S2 automatic checkweigher, year of manufacture: 2002, as an inline checkweigher with automatic rejection of products not conforming to the specified weight, 6) ECOMA can banding machine, max. output depending on format: approx. 35cans/min, year of manufacture: 2022, for control or security bands, 7) COMPRAG ARD-1510 screw compressor, power: 15kW, max. operating pressure: 10bar, air flow rate: 1.9m³/min, year of manufacture: 2022, with RH-500 compressed-air receiver (500l) and refrigeration dryer, the connecting conveyor technology, controls, control cabinets and format parts for 75ml and 400ml cans are included, an on-site inspection is possible. Fpsdpfx Aez Ibxxop Den

Condition: good (used), functionality: fully functional, Glass jar filling and closing line. 12 filling heads and 4 closing heads. Fodetqmvrspfx Ap Djpn

Condition: excellent (used), ABE CraftCan35 canning line for 330 and 440ml aluminium cans, with 5 fill heads, and the rinser/blower addition, and the modified inlet conveyor to accommodate a date coder print head. Upgrade of much of the tubing to standard metric versions (6mm) vs the default 1/4 fittings the line was built with. Walk round video available. Fpsdpoyq Ezyofx Ap Don

Condition: ready for operation (used), Year of construction: 2012, A large-format can filling and closing machine JBT FoodTech from the food industry is available. Can weight: 750g/1000g, can content: sweetened condensed milk, max. throughput capacity: 600cans/min, filling heads: 22, closing heads: 5, design: monoblock, control system: Siemens. Documentation available. An on-site inspection is possible. Fpedpfx Apey N Uv Ss Dsn

Condition: used, Year of construction: 2007, Overview This complete can filling line was manufactured mainly in 2007 and is designed for the filling of beer, carbonated soft drinks and other carbonated beverages in aluminium cans. The line has a capacity of approx. 6,000 cans per hour and is suitable for several can formats, including 250 ml slim, 330 ml sleek, 330 ml standard and 500 ml standard cans. The line includes depalletizing, carbonation, filling and seaming, tunnel pasteurization, tray packing / shrink wrapping, conveyors and control system. The equipment is still installed, currently out of production and available for inspection in Northern Europe. The layout shows a compact line arrangement with depalletizer, filler / seamer, tunnel pasteurizer and downstream packaging area. Technical Data - Line type: Complete can filling line - Capacity: approx. 6,000 cans/hour - Main year of manufacture: 2007 - Application: Beer, CSD and carbonated beverages - Can formats: 250 ml slim, 330 ml sleek, 330 ml standard, 500 ml standard - Packaging: 3x4 or 4x6 trays with shrink foil - Filling / seaming: Monoblock 16/4 - Control system: Siemens SIMATIC S7-300 - Condition: excellent condition - Status: still installed, currently out of production - Location: Northern Europe Inspection: possible anytime Scope of Delivery - Can Depalletizer | TMG Impianti | – | Included with conveyors | 2007 - Carbonator | Comac | Carbonator 1 Column | - | 2007 - Filling & Seaming Monoblock | MCD Bottling Solution / Comac | Can Filler 16-4 P.164.85 | 16 filling valves / 4 seaming heads | 2007 Fjdpfxezh Ifue Ap Dopn - Tunnel Pasteurizer | Comac | Tunnel Pasteurizer | 2007 - Tray Packer / Shrink Wrapper | Dimac | Star One | For 3x4 and 4x6 trays with shrink foil | 2007 - Can Conveyors | Various | – | Complete conveyor system included | 2007

Condition: used, Manufacturer : Indosa Origin : Suisse Year: 1990 (completely upgraded in 2006 with Siemens PLC)   Main machine: Indosa Matic 100 automatic seamer Filling / dosing: AW7/500 module Vacuum / dust collector: CK-V09 system Accumulation table: ZT800 Transport: 12-station star wheel Product feed: pneumatic transfer   Machine type: Automatic filling and sealing line for cans Box type: metal or composite Fodpfx Asx R Dypop Dspn Applications : Dry and granular products Examples: Tobacco, powder, granules, dry foods, solid products   Capacity: up to 40-50 units/min (integrated speed control) Can diameter Ø 80 mm standard (other sizes available on request) Box heights from 20 to 320 mm Dosing type : Weight (vibrator + bucket) Product supply : Pneumatic transfer Metal cover seaming, integrated seaming module Vacuum Integrated dust collection module CK-V09 Lid storage feeder : Yes Automatic control   Documents available in digital format.   Status / Additional information: video available in operation

Condition: as good as new (ex-display), Lubeca LW 303 line for closing Hansa type boxes, including: 1. Two Lubeca LW 303 sealing machines with a full set of production equipment necessary for work. Fpedpfx Aeh S Upmsp Djn 2. A fast clincher to feed both machines at 130 cans per minute 3. Distributor 4. Supply tapes from distributor to 1st and 2nd sealing machines: - 5 m. length - 2.5 m. length 5. Lead strip, after sealing machines: - 5 m. length Note: Gift 3rd Lubeca sealer and clincher, for spare parts. The machines are fully renovated from Lubeca manufacturer. For more information please to send your inquires.

Condition: like new (used), Year of construction: 2024, operating hours: 490 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, COMPLETE MINERAL MASTERBATCH PRODUCTION LINE – PELLETIZING PROCESS High-concentration mineral masterbatch • Turnkey industrial installation • Spain ASKING PRICE: XX.XXX + VAT | COMPLETE LINE ONLY A complete production solution Complete industrial installation designed for the production of highly concentrated mineral masterbatch. The line integrates raw material handling, weighing/dosing, high-speed mixing, conveying, pelletizing, screening, and bagging into a single, coordinated system. The equipment is offered as one complete lot, dismantled and available for relocation. Capacity Approx. 750–850 kg/h* Operating hours Maximum 490 h Mixer 500 L / 300 L usable / 75 kW Pelletizer 350 mm / 37 kW Automation Siemens S7-1200 PLC Power supply Includes 200 kVA Perkins generator Fpsdpsz Aibasfx Ap Den Integrated process RAW MATERIAL FEEDING → AUTOMATIC WEIGHING/DOSING → HIGH-SPEED MIXING → TRANSFER → PELLETIZING → SCREENING → BAGGING Why this line is attractive • Complete and integrated: avoids the engineering and integration work involved in sourcing the equipment individually. • Very low operating hours: maximum recorded operating time is 490 h. • Industrial-scale mixing: 500 L mixer with 75 kW drive and variable-speed control. • Automated dosing and control: Siemens S7-1200 PLC architecture with weighing and recipe-management functions. • Relocatable asset: installation is offered dismantled, making it suitable for transfer to another industrial site. *Capacity is an approximate figure based on the installation configuration and intended application; actual throughput depends on formulation, operating conditions, and product specification.

Condition: used, Complete Industrial Filling, Weighing & Roller Conveyor System Complete industrial filling and container handling system, previously used in an industrial production environment. The system consists of a stainless steel filling station combined with powered roller conveyors, weighing/control equipment, and automated controls. Main equipment includes: Stainless steel filling station Powered roller conveyor system Mettler Toledo weighing and control equipment Mettler Toledo operator/control panels Siemens SIMATIC PLC control system Fedpoz Diutsfx Ap Depn Hitachi SJ200 frequency inverter SEW geared motors Vector Aandrijftechniek geared motors Stainless steel electrical/control cabinets Product filling connections and hoses Operator platform with stainless steel safety railing Local operator control panels Safety equipment and emergency stops Nomafast high-speed industrial door Associated electrical and mechanical equipment The system appears to have been designed for the automated handling, positioning, weighing, and filling of containers/drums in an industrial production process. Condition: Used industrial surplus Availability: Complete system as shown in the pictures Location: Rotterdam, The Netherlands The complete system is available for sale. Dismantling and loading can be discussed. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for further information or to make an offer.

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats Fpsdpfx Ajz Dv Uysp Den - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: excellent (used), ANGELUS 40P Automatic Can Seamer with 21-Piston FMC Filling Unit – Stainless Steel Automatic can filling and seaming unit consisting of an FMC filling unit with 21 pistons and an ANGELUS 40P seamer, designed to continuously perform the operations of product dispensing and hermetic sealing of cans in industrial canning lines. Fpsdpfx Aswn Dl Hsp Dsn The filling unit incorporates 21 pistons, providing repetitive volumetric dispensing before transferring the cans to the ANGELUS 40P seamer, where the sealing is performed by double seaming between the body of the container and the lid. The combination of FMC and ANGELUS technologies provides an industrial solution especially suitable for production lines that require continuity, consistent filling, and reliable container sealing. MAIN FEATURES -Seamer: ANGELUS -Model: 40P -Filling unit: FMC -Number of filling pistons: 21 -Type: Volumetric filler + automatic can seamer -Automatic and continuous operation -Dispensing by pistons -Volumetric filling system -Automatic can feeding -Synchronized transfer between filler and seamer -Lid feeding and positioning -Automatic sealing by double seaming -Construction mainly in stainless steel -Protective enclosures -Access for inspection, cleaning, and maintenance -Robust industrial structure -Integrable into complete canning lines PROCESS The cans are automatically fed into the FMC filling unit with 21 pistons, where they are positioned and receive a controlled amount of product via the volumetric dispensing system. Once the filling is complete, the containers are automatically transferred to the ANGELUS 40P seamer. The lid is positioned on each can, and the seamer performs the necessary operations to form the hermetic double seam, leaving the container ready for subsequent processing and conditioning stages. It can be integrated with: -Can depalletizers -Container washing/rinsing machines -Product feeding systems -Liquid topping dispensers -Vacuum equipment -Filled can washers -Autoclaves/retorts -Pasteurizers -Cooling systems -Labeling machines -Cartoning and palletizing machines APPLICATIONS Especially suitable for canning industries and canned food manufacturers who need to automate the filling and seaming operations together. The 21-piston FMC system can work with different food products, depending on their viscosity, particle size, container format, and installed configuration. It may be suitable for various vegetable preserves, prepared foods, sauces, and other foods compatible with volumetric dispensing in cans. The combination of the 21-piston FMC filler and the ANGELUS 40P seamer constitutes a robust solution for industrial can filling and seaming lines. Machine available for inspection. Additional technical information, can formats, capacities, production speed, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2008, Machine: Candy Recyling Indusistries 28065-026 Shredder for Food Fpedpfjz Rpvlsx Ap Don

Condition: used, Year of construction: 2017, Overview Complete automatic canning line for beer by American Beer Equipment (ABE), built around the LINCAN 35 inline can filler and seamer. The line runs from the can depalletizer through the twister rinser, atmospheric filling and lid seaming to the air knife dryer. It is fully operational, with maintenance up to date and the latest software installed. Technical data - Year of manufacture: 2017 (LINCAN 35) - Capacity: rated 35 cans/min on 0.33 L cans; about 1,500 cans/h in production - Can formats: 0.33 L and 0.44 L in use; compatible with 0.355, 0.375, 0.5 and 0.568 L cans - Filling: atmospheric, for beer at about 3 °C, CO2 purge of each can before filling - Utilities: compressed air at 100 psi (approx. 7 bar), CO2 at 60 psi (approx. 4 bar) - Cleaning: CIP function started from the HMI - Control: touchscreen HMI with daily, weekly, monthly and lifetime can counters Fpjdpfsz Hziuox Ap Dsn - Construction: stainless steel Scope of Delivery - Can depalletizer | Norland | YELLOW JACKET | for aluminium cans up to 24 oz, pallets 56 x 44 in with tier sheets, approx. 340 kg, footprint approx. 2.7 x 2.7 m with conveyor, height approx. 3.5 m - Twister rinser | inclined can twister with rinsing - Atmospheric can filler | LINCAN 35 | 7 inline filling nozzles with level probes, CO2 purge - Can seamer | LINCAN 35 | seaming unit upgraded, retaining bar added on the lid feed - Drying unit | air knife on the discharge conveyor - Documentation | operator manuals, printed and PDF Condition Fully operational and in very good condition, inspected in production. Maintenance up to date, software updated, seaming and lid feed improved. Availability Immediately. Location: Spain.

Year of construction: 2013, condition: good (used), functionality: fully functional, Capacity: 9,000 bottles/hour Products: Milk, yogurt, probiotic and protein drinks Bottle volume: 150 ml The system consists of the following components: Fodpfx Apey Uy Iqe Djpn AUGENSTEIN washing machine (year of manufacture 2006) DECKERT bottle filling machine (year of manufacture 2003) ALCOA/Augenstein cup feeding and application system (years of manufacture 2003/2008) PACE bottle feeding and positioning unit (year of manufacture 2004) SLEEVER INTERNATIONAL pouch machine with steam tunnel (year of manufacture 2013) METTLER TOLEDO 3-scale and metal detector (year of manufacture 2008) Condition: used, fully functional

Condition: ready for operation (used), Diameter range: 52 mm – 65 mm Height range: Production capacity: up to 3000 c.p.h. No. of heads: 18 Fpedpfeyv An Aex Ap Don Tooling for approx. 52 mm (202) Filler and seamer available separately or together

Condition: used, Year of construction: 2018, Overview This compact automated can filling line was manufactured with main equipment from KHS, Ferrum, Ska Fabricating and Atlanta. The line is designed for beverage can production and includes depalletizing, can transport, ionized air rinsing, filling, seaming and downstream film / shrink packaging. The core of the line consists of a KHS Innofill Can C filling system combined with a Ferrum FC03 can seamer. The system is integrated with overhead and floor-mounted can conveyors and is arranged in a compact production layout. Technical Data - Manufacturer / main equipment: KHS / Ferrum / Ska Fabricating / Atlanta - Line type: Automated can filling line - capacity: 15.000/h - Number of filling valves: 21 - Number of seaming heads: 3 - Container type: 330ml, 440ml, 500ml standard can - Packaging type: loose cans into 12 & 24 trays and WA boxes - Year: 2018 - Operating hours: 3,446 h - Layout: compact canning line layout with overhead and floor-mounted conveyor sections Scope of Delivery - Can Depalletizer | Ska Fabricating Co. | – | Enclosed depalletizing system with safety guarding | 2018 - Can Conveyor System | KHS / AE | – | Overhead and floor-mounted conveyor network for empty cans and line transfer | 2018 - Ionized Air Rinser | Ska Fabricating Co. | AV-C500 | Empty can rinsing / cleaning module before filling | 2018 Fjdpfxey Tt H Do Ap Dspn - Can Filler | KHS | Innofill Can C | Automated can filling system | 2018 - Fill level detection | Heuft | - - Can Seamer | Ferrum | FC03 | Rotary can seaming unit | 2018 - Can dryer | Air control industries | 2018 - Labeller | Pack Leader Advanced Dynamics | Pro-516 | Labelling machine incl. roller feed | 2018 - Case Packer | Atlanta | Rafaello 726 | packaging system | 2018 - Case Packer Printer | SATO | S86-EX | 2018

Year of construction: 2014, operating hours: 800 h, condition: like new (used), functionality: fully functional, We offer an automatic weighing and packaging line manufactured by BW Packaging Systems (formerly Simionato), built in 2014. The line is designed for the automatic portioning, weighing and packaging of dry food products such as nuts, dried fruits, seeds, cereals, confectionery and other free-flowing products. Fpedpfx Ajznlbgjp Don The machine is in excellent, like-new condition, has less than 1,000 operating hours and has been fully refurbished. It is fully operational, immediately available and ready for production. The weighing system has a capacity of up to 80 portions per minute, while the intermittent packaging unit operates at speeds of up to 40 packages per minute, depending on the product and packaging format. The combined metal detector and checkweigher shown in the pictures is available separately and is not included in the listed price. A complete maintenance history is available for every individual module of the line, including all service records and invoices. Full original CE documentation for the complete system is included, ensuring complete traceability and compliance. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Diameter range: 99 mm - 153 mm Height range: 28 mm - 250 mm Production capacity: up to 160 - 200 pieces per minute (c.p.m.) Number of heads: 4 Fpedpfx Apszkqwls Don Extended lid feeder Stainless steel

Condition: used, Little used Kosme filling line with equipment made between 2020 and 2021. Equipment includes: - Kosme rotary weight-filler, designed for precise filling of liquids such as edible oils, dairy, home care, or personal care products. - Kosme Flexa Sensicol rotary labelling machine. - Kosme and Atlanta S.p.A. packaging equipment. Fpjdpjzunu Nofx Ap Den

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 Fpsdpfx Apszlqu Ts Den - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: DV 800, type of input current: three-phase, input voltage: 400 V, operating pressure: 6 bar, input current: 16 A, We offer this used Stiller DV 800 semi-automatic can seaming machine with a work table, manufactured in 2020. Fjdpfx Aez I Ty Iep Dopn According to production records, approximately 30,000 cans have been sealed. Serial number: 20089 Cans: Diameter 40-99 mm, height 20 - 150 mm (seaming unit included) Year of manufacture: 2020 Weight: 140 kg Voltage: 230/400 V Current: 16 A Frequency: 50 Hz Power: 0.6 kW Compressed air: 3.4 m3/hour at 6 bar. Cans in 2 different heights, including lids (approximately 6,000 pieces each), are available for the installed seaming unit. Installed seaming head (replaceable) up to 99 mm, chuck (replaceable) exactly 60 mm. Compressed air, including air dehumidifier, is required for operation. The option to purchase an air compressor and air dehumidifier, including couplings and connecting hoses, is available. Forklift/ramp for loading is available. If you have any questions or require further information, please feel free to send us a message or call us.