Used Mae S 100 Sz for sale (78,479)

Condition: used, machine/vehicle number: 51568, pressure:100 t stroke:0-500 mm table surface area:800 x 650 mm Fodpfx Aocxxrrea Nogb ram surface:800 x 600 mm hole in the table:355 mm table height over floor:800 mm dayligth:1130 mm weight of the machine ca.:5,7 t throat:310 mm space requirements approx. LxWxH:1,2 x 2,0 x 3,67 m

Condition: ready for operation (used), Year of construction: 1980, Immediately available ex location: MAE Hydraulic Straightening Press Type HY – S 100 RH Year of manufacture: 1980 Inspected according to UVV Fjdpfsy N Ng Sex Aa Nsgb Stroke: 500 mm Pressing force: 100 tons Table: 4000 x 500 mm Complete with straightening unit Weight: 5,700 kg Price: EUR 4,500.— plus VAT, ex location Hamburg

Year of construction: 1991, condition: used, pressure 100 t throat 380 mm stroke 300 mm arm length 380 mm table surface area 1700x700 mm ram surface 1400x700 mm dayligth 650 mm total power requirement 30 kW weight of the machine ca. 10 t dimensions of the machine ca. 2400x3600x3400 m Fodpfxolp U Ayo Aa Nogb

Condition: ready for operation (used), DROOP & REIN SZ 100 / Keyway Broaching Machine for Lubrication Grooves - Maximum machinable diameter: 140 mm - Spindle bore: 40 mm - Groove length per stroke: 100 mm - Distance between chuck and tailstock center: 350 mm - 3 working speeds - Electric chuck guard - Good / fully operational condition Dimensions: LxWxH 0.9x0.6x1.5 meters / Weight: 300 kg Fgsdpfx Aaeyl R Ets Njb Subject to errors and omissions

Condition: used, Max. output: 108.8 ml/stroke, speed: 5-6 stroke/min, capacity: 2x 20l, with documentation, machine was hardly used. Fgedow D Dc Djpfx Aa Neb

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation Fgedpfxsdzp Trj Aa Njb - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: like new (used), Year of construction: 2010, operating hours: 76,482 h, turning length: 800 mm, turning diameter: 430 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 455 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 6,000 rpm, feed length X-axis: 455 mm, feed length Z-axis: 430 mm, workpiece weight (max.): 5 kg, total height: 8,500 mm, total length: 2,500 mm, total width: 2,495 mm, overall weight: 8,500 kg, CNC controller: Fanuc FS31IA5 (MAPPS 4) Capacity Turning length mm: 800 Max. turning diameter mm: ø: Ø430 Turn-mill spindle X-axis travel mm: 455 Z-axis travel mm: 800 B-axis degree: ±120 (0.001º) Speed spindle rpm: 12000 Drive power kW: 9/5.5 Y-axis travel mm: ±105 Tool magazine Magazine places: 76 Tool holder: Capto C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret X-axis travel mm: 160 Z-axis travel mm: 730 Number of tool slots St .: 10 Main spindle Speed spindle rpm: 6000 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 7.5/5.5 Chuck type: Solid Chuck (8") Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Coolant gun Working time hours Under power: 76482 Spindle 1: 14010 Spindle 2: 4306 Potencial nominal kVA: 48 Basic machine dimensions / weight Fsdpfsy Rpq Tex Aa Njgb Length mm: 2500 Width mm: 2495 Height mm: 8500 Weight kg: 8500

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm Fgodpfxswwl I Io Aa Nsb workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The guides have been outdated 10 years ago

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent - Hydraulic system adjacent Fedpfohv A A Djx Aa Negb - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. very good condition

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used GÜNTNER Hermeticool-Hybrid HC-H 100 S-GFHE 080.5/A-N(S)-G4/2P air-cooled water recooler, year of manufacture 2017. Project number: 101048869 Device designation: S-GFHE 080.5/A-N(S)-G4/2P Device serial number: 404549442/19.02129 Fgjdpfoy Akgyox Aa Nsb Year of manufacture: 2017 Ambient temperature min.: -30.0 °C Ambient temperature max.: +50.0 °C Volume: 116.2 l Permissible temperature (TS) min.: -50.0 °C Permissible temperature (TS) max.: +100.0 °C Test pressure: 11 bar Fan speed: 2,609 rpm Fan current: 22.4 A If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor Fedpfeyupuljx Aa Negb - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Fgjdpfx Aajlatz Ds Neb Belt length: 2000 mm

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: Fjdpfek Eakvex Aa Nogb -230 V -0,7 A -50 Hz -IP 65

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 are each composed of the following components: Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Fjdpfx Aashxvu Ej Nogb Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Condition: good (used), Technical data for pallet pull-out: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x pallet pull-out, used for rack depth: 800 mm Material colour: blue Overall depth: approx. 810 mm Overall width: approx. 1,295 mm Fgsdpoww Im Hefx Aa Njb Height: approx. 265 mm Pull-out: 100% = 740 mm Weight per unit: approx. 100 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, extra costs will apply, which can be provided upon request based on delivery location and order scope.

Condition: used, Year of construction: 2003, pressure . t throat . mm stroke . mm pressure capacity max. 63 t total power requirement . kW weight of the machine ca. 4 t Fodpfx Asw Syfcea Nsgb

Condition: new, Schmersal MZM 100 ST2-SD2PREM-A solenoid interlock,unused in opened original packaging, 100% functional, scope of delivery according to photos Fjdpepnpntefx Aa Njgb

Condition: new, machine/vehicle number: S-CL-100-FN-EC, functionality: fully functional, input voltage: 230 V, volume flow: 134 m³/h, total height: 475 mm, total length: 250 mm, total width: 250 mm, overall weight: 17 kg, Equipment: type plate available, ISI S-CLEANER Mechanical air filtration unit (solder fume) for up to 1 workstation Type: 100 FN Version: conditionally mobile (glide runners/no wheels) Control: none Fgsdowpu Twepfx Aa Nob Horizontal, conditionally mobile mechanical air purifier with EC- radial fan for the separation of solder fumes. TECHNICAL DESCRIPTION: Air volume: - 134 m³/h (air flow rate) - 100 m³/h (effective air capacity) (depending on the filter assembly, without collecting elements) Suction nozzle: NW 50 mm (rear) Filter assembly: - Pre-filter - HEPA filter H13 - Activated carbon cassette (refillable) Color: RAL 7035 light gray Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air capacity: not adjustable Dimensions: Length 250 mm / Width 250 mm / Height 475 mm Weight: 16.5 kg

Condition: ready for operation (used), Year of construction: 2018, clamping force: 400 kN, screw diameter: 30 mm, injection weight: 79 g, Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details. • Tie bar distance: 270 mm • Injection unit: size 100 (per EUROMAP) • Operating hours: 4,261 h (automatic) • Screw diameter options: 15 / 20 / 30 mm • Max. swept volume: 18 cm³ (15 mm), 31 cm³ (20 mm), 71 cm³ (30 mm) • Max. shot weight (at 1.15 g/cm³): 20 g (15 mm), 35 g (20 mm), 79 g (30 mm) • Max. injection pressure: 2,500 bar (15/20 mm), 1,390 bar (30 mm) • Centering diameter: 125 mm Fgodsy Nkwlepfx Aa Nsb • Vacuum pump capacity: approx. 25 m³/h • Pneumatic flow rate: 1,000 l/min per circuit • Heating capacity per control circuit: 3.6 kW / 230 V (16 A fuse) • Drive motor voltage: 380–480 V (50–60 Hz)

Condition: new, AEG Modicon AM-C 916-100 CPU card S/N 0007107, unused, 100% functional Fsdpfx Aaoi D Tu Ae Nogb

Year of construction: 1993, condition: reconditioned (used), year - 1993 / 2020 complete reconditioned with new PLC Management tube diameter max. 100 mm wall thicknes - 10 mm pull up length of tube - 6000 /12000 mm Mandrel pipe bending up to 4 mm pipe wall thickness and pipe bending without mandrel from 5.0 - 10 mm pipe wall thickness accuracy of bending angle ± 0,2 ° total power requirement - 50 kW Fjdoiau Uuspfx Aa Nogb weight of the machine ca. 6 t

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 05/2027, overall weight: 540 kg, total width: 1,000 mm, total length: 1,195 mm, input frequency: 50 Hz, electrical fuse: 16 A, Spiral Kneader Kemper F 100 S Dough machine Kemper Model: F 100 S 2 speeds Fodpfsyhznbex Aa Njgb Simple, robust engineering Only from us: DGUV V3 safety inspection Connection: 400V, 16A-CEE plug Used machine, cleaned Options: Maintenance contract Spare parts kit Service package Delivery service Training & commissioning Visit our large exhibition!

Condition: good (used), machine/vehicle number: 042-020/101, Single-column press with drawing cushion, good condition, immediately available Fedey Hq Ifjpfx Aa Nogb

Condition: used, mileage: 84,000 km, power: 75 kW (101.97 HP), first registration: 01/2021, fuel type: diesel, overall weight: 2,220 kg, wheelbase: 2,755 mm, next inspection (TÜV): 05/2028, color: white, emission class: euro6, number of seats: 2, construction height: 1,819 mm, working width: 1,855 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, traction control, Air conditioning, central locking with remote control, electrically adjustable exterior mirrors, electric front windows, Plus multifunction display, Driver Assistance System: Driver fatigue detection, Cruise control with speed limiter, Leather multifunction steering wheel with shift function, Rear parking sensors, Full-size steel spare wheel, Intermittent wipers with light sensor, LED headlights, 'Composition Audio' audio system (touchscreen color display), Emergency call system, tinted laminated windshield, green-tinted heat-insulating glazing (side/rear), driver’s airbag, passenger airbag (can be deactivated), Electronic Stability Program (ESP) with brake assist - ASR/ABS - EDS - MSR, Front lumbar support, Start/stop system, Particulate filter, Right sliding door, Electronic immobilizer, 6.5x16 steel rims (black), Headlight leveling control, Onboard tools and jack, Electronically controlled power steering (Servotronic), Paint: Candy White, Carrier Neos 100 S cooling unit for deep-freeze operation, Multifunction steering wheel, 'Composition Audio' audio system (touchscreen color display - 2 speakers), 2 speakers, Height-adjustable front seats, Special paint finish Candy White uni, Full wheel covers/hubcaps, Armrests for driver and front passenger seats, Non-smoker package, Black, unpainted exterior mirrors and door handles - silver sliding door track cover, Black, unpainted exterior mirrors, Silver sliding door track cover, Black, unpainted exterior door handles, Roof rail/roof rack preparation, Automatic headlight activation (ALS), Standard rear lights, Interior trim: Matte decor inlays, Front carpeting, Standard load compartment lining, 2 folding remote keys, Plastic door trims, Front seat belts with pretensioners, height adjustable, Front seat belt warning system, 1 interior light in the load compartment, Open glove compartment, Front cup holders, Lashing eyes in cargo compartment, First aid kit and warning triangle, Anti-lock Braking System (ABS), Electric parking brake with auto-hold function, Driver Assistance System: Multi-collision brake, Truck registration, Steering column (mechanically adjustable in height and reach), SCR system (AdBlue technology), Body type: panel van, Drivetrain: front-wheel drive, Wheelbase 2,755 mm, 6-speed gearbox. Over 150 transporters and buses in stock. Financing or leasing available via Santander Consumer Bank, Targo Bank or Auto Europa Bank – we are happy to advise you. This offer is non-binding; no guarantee is given for equipment details. Listed equipment is subject to separate verification. Changes, errors and prior sale reserved. Delivery available for an additional charge. Export registration plates available on site. Trade-in of your old vehicle possible. Retrofitting of: - Tow bars (up to 3,500 kg possible) - Auxiliary heaters - Screen for reversing camera and/or smartphone navigation (Android Auto) - Reversing system with rear camera - Workshop fit-out - Cruise control - Installation of a tail lift (LBW) and further customized solutions for your business needs possible at extra cost. Fodoyxwz Aspfx Aa Njgb

Condition: used, Type: AE 100 S Fsdpfoy Apcmex Aa Nsgb Part No.: 202-00023 Steps/revolution: 1024 Model/Version: 471/V001 Interface/Code: Parallel/Binary Output level: Push/Pull +(11-27) Volts Option: F/R, Latch incremental adjustment