Used Mae S40S for sale (153)

Year of construction: 1991, condition: used, pressure 40 t throat 320 mm stroke 250 mm arm length 320 mm table surface area 1400x600 mm ram surface 1200x600 mm dayligth 650 mm total power requirement 22 kW weight of the machine ca. 8 t dimensions of the machine ca. 3200x3300x3300 m Bsdpfx Akslp U Avs Hslg

Condition: used, Year of construction: 2008, Technical details: pressure: 6 t stroke: 1020 mm Blodpfx Akow Ng D To Hjg total power requirement: 3,5 kW Can only adjust between tips *

Condition: ready for operation (used), Year of construction: 1980, Immediately available ex location: Hydraulic straightening press MAE Type HY – S 100 RH Bledpfxsy E I Nde Ak Hjg Year of manufacture: 1980 Inspected according to UVV Stroke: 500 mm Press force: 100 t Table: 4000 x 500 mm Complete with straightening unit Weight: 5700 kg Price: EUR 6,000 plus VAT, ex location Hamburg

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Bodpfxedzp Tre Ak Holg Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: good (used), Year of construction: 1991, Hydr.horizontal straightening and bending press Pressure capacity max.160 t MAE Type:HY RI 160 RH Year.1991. Blodpfscffzajx Ak Hsg For more data see data sheet.

Condition: used, Technical details: pressure: 160 t table surface area: 1.260 x 600 (vertical) mm table plate diameter: 1260 x 600 x 70 (vertical) mm ram surface area: 700 x 360 mm throat: 300 mm weight of the machine approx.: 9000 kg dimensions L x W x H: 3,7 x 1,5 x 2,2 m Bedpou Nfpusfx Ak Hslg distance base - ram: 1.000mm mounted ram construction: L:660 x W:300 x H:370mm rollers 1x on the right and 1x on the left with vertical adjustment 250mm. (Ø 80x300mm) *

Condition: used, Year of construction: 2003, pressure . t Bledpfxow Syfcs Ak Hjg throat . mm stroke . mm pressure capacity max. 63 t total power requirement . kW weight of the machine ca. 4 t

Year of construction: 1986, condition: good (used), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic cylinder press brake -Hydraulic cylinder: comes from a hydraulic press manufacturer MAE type HY-S63S pressing force 63 tons -Hydraulic cylinder: pressure piston stroke 690 mm Bsdpfsupbd Tox Ak Hjlg -Piston rod: Ø 130 mm -Piston diameter: approx. 160 mm -Bolt circle: Ø 180 x 18 mm -Dimensions: Ø 270 x 1200 mm -Weight: 330 kg

Condition: good (used), Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Handover: in its current condition as inspected Blodpfxsupbdgs Ak Hog -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm -Max. stroke: 710 mm -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg

Condition: used, Year of construction: 1984, pressure 10 t distance between columns 500 mm Bjdpfx Aet Hwwdok Hslg stroke 200 mm total power requirement 10 kW weight of the machine ca. 4.500 kg dimensions of the machine ca. m

Year of construction: 1991, condition: used, pressure 100 t throat 380 mm stroke 300 mm arm length 380 mm Bsdjlp U Ayepfx Ak Helg table surface area 1700x700 mm ram surface 1400x700 mm dayligth 650 mm total power requirement 30 kW weight of the machine ca. 10 t dimensions of the machine ca. 2400x3600x3400 m

Condition: used, machine/vehicle number: 51568, pressure:100 t stroke:0-500 mm table surface area:800 x 650 mm ram surface:800 x 600 mm hole in the table:355 mm table height over floor:800 mm dayligth:1130 mm weight of the machine ca.:5,7 t Bsdocxxrrjpfx Ak Holg throat:310 mm space requirements approx. LxWxH:1,2 x 2,0 x 3,67 m

Condition: good (used), AMMANN dryer drum with gas burner Blsdpfoywctzox Ak Heg Capacity: 160 tons/hour Year: 2006

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, total height: 2,750 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table width: 630 mm, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,500 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, Equipment: documentation/manual, CNC JIG GRINDING MACHINE HAUSER S40-400 TECHNICAL CHARACTERISTICS : Stroke X axis: 650 [mm] Max. Stroke speed X axis: 4000 [mm/min] Working feed X axis: 0 - 1800 [mm/min] Bledpfxsya Dz Ro Ak Hsg Stroke Y axis: 450 [mm] Working feed Y axis: 0 - 1800 [mm/min] Stroke Z axis: 130 [mm] Min. Stroke speed Z axis: 0.5 [mm/min] Max. Stroke speed Z axis: 12000 [mm/min] Stroke frequency Z axis: max. 4 [Hz] Stroke W axis: 500 [mm] Planetary speed C axis: 5 - 250 [rpm] Max. Stroke speed W axis: 800 [mm/min] Stroke U axis (radial feed): 5.5 [mm] Distance between columns: 750 [mm] Table length: 770 [mm] Table width: 630 [mm] Clearance between grinding motor and table: 585 [mm] Max. load on table: 500 [Kg] Supply voltage: 400 [V] Weight: 4550 [Kg] ADDITIONAL INFORMATION : x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -HTG-RWS-60 automatic belt filter cooling unit x1 MSS (Multi-Sensoric System) tool detection device x1 CBN dressing unit with HF drive for automatic dressing of CBN grinding wheels (ceramic bond and synthetic resin) x1 T16 grinding turbine - speed: 160,000 rpm - reference: 164225 x1 turbine support with filter for use with T10 and T16 turbines - reference: 166497 x1 60S-TC grinding motor, speed 9000 - 60000 [rpm], for SK20 collets - part number: 208450 x1 intermediate plate for aligning motors and urbines - reference: 192940 x1 centring watch holder for grinding motor rotor - reference: 191790 x15 wheel holder cleats x1 cable for grinding motor Various tools Full documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,550 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, clearance between the columns: 750 mm, Equipment: documentation/manual, CNC Jig grinder HAUSER S 40 400 TECHNICAL CHARACTERISTICS : Stroke X axis : 650 [mm] Max. Stroke speed X axis : 4000 [mm/min] Working feed X axis : 0 - 1800 [mm/min] Stroke Y axis : 450 [mm] Working feed Y axis : 0 - 1800 [mm/min] Stroke Z axis : 130 [mm] Min. Stroke speed Z axis : 0.5 [mm/min] Max. Stroke speed Z axis : 12000 [mm/min] Stroke frequency Z axis : max. 4 [Hz] Stroke W axis : 500 [mm] Planetary speed C axis : 5 - 250 [rpm] Max. Stroke speed W axis : 800 [mm/min] Stroke U axis (radial feed) : 5.5 [mm] Distance between columns : 750 [mm] Table length : 770 [mm] Table width : 630 [mm] Clearance between grinding motor and table : 585 [mm] Max. load on table : 500 [Kg] Supply voltage : 400 [V] Weight : 4550 [Kg] Blodpfjya Az Nox Ak Hjg EQUIPMENT INCLUDED: x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -automatic paper tape filtration unit x1 grinding motor 22 S, speed 4500 - 22500 [rpm], for EX23 collets - part number: 181561 x1 45 S grinding motor, speed 9000 - 4500 [rpm], for EX19 collets - reference: 144017 x1 80 S grinding motor, speed 40000 - 80000 [rpm], for F6 collets - reference: 144021 x1 grinding motor for slot grinding (motor + belt are included) - reference: 144022 x3 grinding tools for slot grinder x1 set of belts for slot grinding motor x1 intermediate plate for alignment of grinding motors - reference: 192940 x1 infinitely adjustable cantilever plate with mounted grinding motor for grinding up to Ø360 [mm] - reference: 144023 x1 adjustable plate, for tilting grinding motors and turbines (up to 16°) - reference: 126148 x1 set of 2 HAUSER 90° angle brackets - reference: 155361 x1 centring microscope - reference: 146318 x1 tool contact detection device - reference: 162334 x20 grinding wheel holders x1 cable for grinding motor Various tools Complete documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, Char-Lynn hydraulic motor Bljdpfx Ajw Dazcsk Heg -Type: MAE 140 740Shaft: Ø 31x 50 mm -Dimensions: 260/133/H130 mm -Weight: 13.9 kg

Year of construction: 2026, condition: new, machine/vehicle number: Al160, Compact size, high productivity food processing machine: Vegetable processor is a productive, compact-sized commercial cabbage shredding machine that is intended for cabbage shredding, slicing, grating, as well as beets, carrots grating, and julienne cutting. High productivity 500-1000 kg/h, high-quality materials as food-grade stainless steel AISI 304. Made for small and medium-sized producing companies. General Features: Bledpfx Asdwfdqok Hsg • Productivity 500-1000 kg/h; • High quality, longlasting stainless steel cutting knives (up to 100 tons between sharpening); • Disc diameter of 40 cm, grants, that you can put whole or cut in half small cabbage heads; • The universal cutting machine, very good for slicing, grating, mashing, julienne stick cutting; • Compact size can be equipped with wheels and easily transported; • Easy to clean, can be washed with low-pressure water; • All food contact elements made of stainless steel; • Powder-painted frame, three-layer lacquer in the standard version, or full stainless steel version • Machine motors can be adjusted as required up to 2200 W. • Electric connection 400/220/120 Volts, 50-60 Hz. For different connections, please ask;

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Sempress type: ADO-MAEFlange: Ø 40 mm -Thread: M16 x 1.5 -Stroke: 980 mm -Dimensions: 1180/65/65 mm Bodpjd Nn Idofx Ak Hjlg -Weight: 8.1 kg

Condition: used, Radial Fan REITZ Type: MAE Serial No.: 601475 Year of manufacture: 2017 Bledpfx Aker H Sqyj Hsg Airflow: 4,260 m³/h = 71 m³/min. Pressure p: 1.2 kg/m³ Air inlet: Ø 250 mm (connection diameter in the base plate) Air outlet: 245 x 195 mm Motor speed: 2,915 rpm Motor power: 7.5 kW Power supply: 400 Volt, 50 Hz - Impeller with 9 blades - Directly flange-mounted drive motor - Flange dimensions for air outlet: 310 x 260 mm - Robust metal housing made of 5 and 6 mm steel Space requirement (L x W x H): 1,390 x 1,030 x 600 mm Radial fan weight: 200 kg In excellent condition, only test run.

Condition: used, Year of construction: 2021, machine/vehicle number: PB017, operating hours: 335 h, Max. load capacity: 2,820 kg, max. working radius: 820 cm, hook height approx. 870 cm, max. lifting height. Battery type: lithium-ion, dimensions (L/W/H) approx. 280-332x75x147 cm, fully electric drive with lithium-ion battery, variable motor 7.5 kW AC 30 V, own weight approx. 1,995 kg Bledpfxsy D Tyfj Ak Hsg

Condition: used, Year of construction: 2021, machine/vehicle number: P3375, operating hours: 867 h, Max. lifting capacity: 2,820 kg, max. working radius: 820 cm, hook height approx. 870 cm, L/W/H: 332x75x147 cm, dual power Diesel/Electric 400 V, diesel engine Yanmar 2TNV70-NMBA 7.4 kW, 2,500 rpm, electric motor fully enclosed and fan-cooled (5.5 kW, 4P, 400V), own weight approx. 2,160 kg, crane hook MAEDA SCM4x5 (capacity: 2.79 t) Bedoy D Tylopfx Ak Helg

Condition: used, Year of construction: 2017, machine/vehicle number: E0455, operating hours: 1,910 h, Max. lifting capacity: 3,830 kg, max. working radius: 1,600 cm, hook height approx. 1,680 cm, dimensions (L/W/H) 498x138x198 cm, combination unit with diesel/electric motor 380 V, diesel engine Yanmar 3TNV88-BPMB 21.4 kW at 2,500 rpm, electric motor 7.5 kW, 4-phase, net weight approx. 5,750 kg, crane hook MAEDA SCM 435 (max. lifting capacity 3,780 kg) Bodsy D Tyrjpfx Ak Hjlg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, working width: 800 mm, workpiece height (max.): 150 mm, Hello, we are selling a production line for hammering stone slabs with a maximum width of 800mm. The package also includes a Donatoni reinforcement mesh remover for the back side of the slabs. The line is still operational and can be tested. We will dismantle the machine in January 2026. Loading onto truck is included. Bjdpfxsx Afp Hs Ak Hslg

Year of construction: 2022, condition: used, Uplifter mini crane MC 285-3 CWME, lifting capacity 2,820 kg at a radius of 1,400 mm. Maximum lifting height: 8,700 mm. Maximum working radius: 8,200 mm (at a load of approx. 150 kg). Equipped with assembly jib and transport cart UPT 200. Less than 100 operating hours. Storage location: at customer site. Blodpfxjytrd Ts Ak Hjg

Condition: new, functionality: fully functional, fuel type: hybrid, color: blue, overall weight: 2,900 kg, empty load weight: 2,900 kg, operation weight: 2,900 kg, lifting power: 2,980 kg/m, tire condition: 100 %, Year of construction: 2024, operating hours: 1 h, Equipment: adjustable boom, crane, hydraulics, low noise, onboard computer, rubber tracks, 🔧 Key Specifications: • Year: 2024 • Operating hours: 1 h (NEW) • Max capacity: 2,980 kg (main boom) / 1,000 kg (with jib) • Max lifting height: 16.95 m (with jib) / 12.0 m (main boom) • Max working radius: 14.3 m • Power: Bi-energy (diesel + electric + battery) • Remote control: Fully proportional radio control • Hydraulic winch: Yes • Jib: Hydraulic telescopic jib included • Undercarriage: Variable crawler gauge • Outriggers: Automatic multi-position outriggers • Tracks: Rubber tracks (non-marking) • Weight: approx. 2,900 kg • CE certification: Yes Bledpey Hqhrofx Ak Hjg ✨ Highlights: ✅ Bi-energy spider crane (diesel + electric operation) ✅ Suitable for indoor & zero-emission working ✅ Fully proportional remote control ✅ Hydraulic winch for precise lifting operations ✅ Hydraulic telescopic jib for extended reach ✅ Variable crawler gauge for maximum stability ✅ Automatic multi-position outriggers ✅ Compact design for confined spaces ✅ Ready for immediate deployment ⚙️ Condition: New machine — never used. Factory-new condition with full inspection and CE certification. 🌍 Location & Price: 📍 Sittard, Netherlands 🚚 Worldwide delivery available 💰 Price: €119,500 (EXW / excl. VAT) 🚚 Delivery: • Crane loading available • Flexible transport options • Handled by Collé Rental & Sales logistics