Used Bima for sale (143)

Condition: good (used), Year of construction: 1999, large tool changer (tool plate), 12 places - travel X: 4000 mm, travel Y: 1200 mm, travel Z: 100 mm, CNC program control: IMAWOP 2.5, drilling spindles: 11, arrangement Y: 5, arrangement X: 6 Installation dimensions approx. 10 x 6 m, number of vacuum pumps: 2, weight approx. 6000 kg, simultaneous processing of several components: 4, alternating left-right positioning Can be integrated into the network via Ethernet cable, has edge banding unit (defective), the units for post-processing the glued edge are not included The machine was in regular use and functional until the end. Last machine maintenance by IMA specialist in spring 2024. According to his assessment, the overhaul of the control cabinet electronics is recommended Original programming instructions for IMAWOP 2.5 and IMATRONIC 231 training documents included Available from: immediately Terms of delivery: ex works - EXW Terms of payment: Payment before collection Ckndztxbbc Accessories without guarantee. The following applies: "Object purchased as seen". The prospective buyer must convince himself of the completeness of the object on site.

Condition: as good as new (ex-display), Functionality: fully functional, Ferwood Code: RS0000852 - Manufacturer Code: 10551904 - Condition: As new (display item) - Functionality: Fully functional - Compatible machine: Ima Bima drilling-milling-beading center - Weight: 4KG - Dimensions: 36X26X21 - If interested we offer overhaul service, please contact us. Blzqxub079V

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 481, -4 tie bars (normal 3 per side) Dmerw7 -tie bars with probe depth -Machining length 4550x1550mm -8-fold tool changer -drilling unit in x and y row drilling -Sawing unit can be swivelled in x and y -IMAWOOP machining surface -vacuum pump from Becker (dry runner) The machine, as well as the computer, have been regularly serviced by specialized personnel. Condition is good and everything is functional.

Year of construction: 2011, Condition: ready for operation (used), Movement X-Axis Movement 6000 mm Y-Axis Movement 1200 mm This 3-axis IMA BIMA/410/120/600 woodworking machine was manufactured in 2011. It features a working depth of 1200 mm and a working width of 6000 mm, which can be divided into two working areas of 2400 mm each, plus a safety area of 1200 mm. With the "long workpiece" setting, the full working width can be utilized. A great opportunity to buy this IMA BIMA/410/120/600 woodworking machine. Contact us for further details regarding this woodworking machine. Bqr30Fmzm3 Application Types Wood Working

Year of construction: 2014, Condition: excellent (used), IMA moving gantry machine in true GANTRY design Machining area: - Length in X-direction with all aggregates (mm): 6300 - width in Y-direction with all aggregates (mm): 1600 - Height in Z-direction with all aggregates (mm): 225 maximum clamping height including clamping device - the max. workpiece thickness depends on equipment/application - length in X-direction with vertically positioned main spindle and tool diameter 20 mm: 6300 mm - Width in Y-direction with vertically positioned main spindle and tool diameter 20 mm: 2000 mm - Width in Y-direction with edging (mm): 1600 - Length in X direction single station machining without edging (mm): 2 x 3050 - Length in X-direction free space centered (mm): 200 - Length in X-direction single station machining with gluing (mm): 2 x 2800 - Length in X-direction free space centered (mm): 700 - Length in X-direction alternating field machining (mm): 2 x 2425 - Length in X-direction free space centered (mm): 1450 - Weight of IMA moving gantry machine (kg): approx. 10,500 - Work table height (mm): approx. 950 - IMA control system: ICOS CNC - Graphical user interface: IMAWOP in machine license version - Vacuum pump - capacity (m³): 100 - Separate coolant tank Automatic set-up table BIMA Gx50, y=1600 mm with suction plates on linear guides Additional support arm for automatic set-up table BIMA y=1600 mm with a front stop and automatically lowerable support rail Table design for 4 places offset in X for table with 8 support arms Chip ejection conveyor Video camera: installed in the suction hood next to the main spindle, for observation of the machining process on a separate monitor unit including video server 1 main spindle 18 kW, vector-controlled - suitable for milling, drilling, sawing and grinding 1 automatic tool/adapter changing magazine, mounted on the rear side of the support (arrangement on the support moving in X-direction) B2L0Q99G 1 automatic tool/adapter changing magazine, mounted on the rear side of the support (traveling along the support in the Y direction) 1 vertical drilling unit I21 Attachment unit horizontal drilling and milling head (cross head) with its own 360 degree C-axis and pneumatic feed stroke for attachment to mounting position 1 of the drilling head Edge feeding unit for diode lasers in stationary technology mechanically designed for: - edge thickness (mm): 0,4 - 3 - workpiece thickness (mm): 19 - 60 - inner and outer radius: depending on edge material - edge material length min. (mm): approx. 350 - dimension before edge joint (mm): approx. 220 on the straight line Automatically adjustable combi unit (AEK) Self-feeding flat scraper 1 adapter unit profile scraper with flat scraper

Condition: used, Year of construction: 2008, Working dimension X: 4.300 mm Working dimension Y: 1.400 mm Working dimension Z: 125 mm Number of milling spindles: 1 Main motor power: 7,5 kW Rotation speed max: 18.000 rpm Torque support: Yes 4th axis: C-axis 5th axis: Aggregate interface Tool clamping system: HSK-F63 Tool changer positions: 18 Number of exchangeable units: 4 Vertical drilling spindles: 14 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: 90° turnable Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 8 Positioning aid: Yes Vacuum pump: No Safety device: Safety mat Cq9W2Herwk Vario NC: Yes Two rows of stops: Yes Workpiece support aids: Yes Disc tool changer: Yes Handheld terminal: Yes LED luminous tape: Yes UPS - Uninterruptible Power Supply: Yes Manual central lubrication: Yes Software: IMA IMAWOP 6.0, PC office licence Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 17 kW

Year of construction: 2002, Condition: ready for operation (used), Table Outer length 3000 mm Dqnb9J Outer width 1200 mm This 4-axis IMA BIMA 310 120/300 CNC Wood Machining Centre was manufactured in 2002. It features a main spindle for 4-axis machining, a large area of 3000 x 1200 for diverse project sizes, and includes both vertical and horizontal drilling units. Accessories such as adapter units, tools, and HSK holders are also part of the package. If you are looking to get high-quality woodworking capabilities, consider the IMA BIMA 310 120/300 machine we have for sale. Contact us for more information. Application Types Milling (Wood)

Condition: used, machine/vehicle number: 006054, X axis working area: 5300 mm Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 9 KW Number of controlled axes: 5 axes Total number of drilling spindles: 32 Total number of tool changer positions: 8 Dqkwwr

Condition: good (used), Year of construction: 2002, CNC machining center Make: IMA Type: BIMA 310 120/300 Year of construction: 2002 Main spindle with 4 axes machining Cogaqo20Tg Machining area 3000 x 1200 with vertical and horizontal drilling units with accessories (adapter units, tools, HSK holders)

Condition: good (used), Year of construction: 2004, Working center with edgebanding unit IMA Bima 400 in good condition. C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Electrospindle with 7.5 kW Drilling unit with 14 vertical spindles, 6 horizontal drills Cv9I7Ph2 Edgebanding unit More details on request.

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 22129, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, The machine is in very good condition, functional, has two separate heads for drilling and milling pieces with aggregates, as well as a weighing machine especially for circular weighing with a container for abs strips (6 containers). The machine has two movable tables that can work independently of each other, two separate vacuum pumps for each table, a protective fence with an entrance door (3). Cccq78O Belt chip conveyor The machine comes with a lot of spare parts as well as aggregates for processing ABS tapes which are correct.....

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding process) mm 3100 x 2000 x 100 Max useful working area (edge banding process) mm 3100 x 1925 x 60 (panel thickness) No. 6 movable rails (supports) length mm 1400 LED displaying both the axe X and axe Y position Vacuum cups (with No. 1 vacuum pump, capacity 250 m3/h) Safety side metal grids and front emergency carpets No. 1 Vertical Electro-spindle HSK F63 ( Kw 18) Automatic Tools Changing System, with 18 folds (places) No. 14 Independent vertical boring spindles (2 x Kw 1,2) Aggregate Boring Unit, "cross" shape, with 4 horizontal spindles + Circular saw (diam. mm 125) Banding group on board - Glueing Unit (Hot Melt Glue) VT 100 Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate "FLEX 5" Mod. VARIO NC No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit No. 1 Bar Code Reader Dnhcyp

Year of construction: 2003, Condition: ready for operation (used), Control Unit Brand IMATRONIC Model NT 231 IMAWOP 4.0 on Windows 2000 Professional Main Drive Spindle speed range 1500 - 24000 rpm Spindle motor power 7.5 KW Movement X-Axis Movement 6000 Y-Axis Movement 1400 Z-Axis Movement 100 Imd0Mfvq7 Media Chip conveyor Yes Additional Equipment LED setting help 2 vacuum pumps 18-fold tool changer Edge gluing unit VT 100 This woodworking machine was manufactured in 2003. Equipped with a CNC control IMATRONIC NT 231 and IMAWOP 4.0 on Windows 2000 Professional, it features a main spindle with 7.5 KW power and a speed range of 1500 - 24000 rpm. It includes an 18-fold tool changer and a vertical drilling unit with 21 spindles. The edge gluing unit VT 100 supports 4-sided and round butt gluing. For more information about this woodworking machine, please reach out to us. Application Types CNC Wood Machining

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,630 mm, TECHNICAL DETAILS R9Gnphta X-travel without gluing: 6,000 mm X-travel with gluing: 5,000 mm Y-travel: 1300 mm Y-travel with main spindle + tool diameter 20 mm: 1630 mm Y-travel with gluing: 1450 mm Setup table: Dyna Poin BIMA 410 V Occupancy: 4 places Edge banding unit: available

Condition: good (used), Year of construction: 2013, operating hours: 4,123 h, 5 - axes main spindle Cross drilling head Saw head 0/90° Working dimensions: approx. 530 x 130 cm Dprb2B Overhauled replacement spindle installed in 2023 Operating hours 4,123 h (read at the end of 2023)

Condition: repair required (used), Year of construction: 1998, Functionality: limited functionality, machine/vehicle number: 20671, Equipment: documentation/manual, The machine is basically functional, but should be completely overhauled before being put into operation. Uj2Etydqsf The machine is connected and can be inspected on site.

Condition: good (used), Year of construction: 2013, IMA BIMA CNC GX 30 R - year 2013 - immediately available - Machining approx. 5 x 1.3m Dpdgcx

Condition: excellent (used), C.N.C. WORKING CENTER with 5 axes (X-Y-Z-C-5) routering, boring, cutting and edge banding Goose-neck machine - Front emergency carpets Safety cabin (enclosure) of the working head Numerical Control Type ICOS CNC - Software IMAWOP Working table with pods and rails (No. 8 rails x mm 1400) LED system (on the rails) for the vacuum pods positioning Automatic Tools Changing System (Store with No. 18 positions) Useful working area (X - Y - Z) mm 4000 x 2100 x 300 Useful working area (X -Y - Z) in edge banding mm 4000 x 1800 x 60 Nr. 2 Working areas - Vacuum pump / capacity (m3/h) 140 Motorized carpet to evacuate the wastes from the working process Separate electric and command cabinet - Total power installed Kw 32 Working group (top head) Nr. 21 Independent vertical boring spindles (4 X Kw 1,2) Nr. 1 Vertical Electro-spindle HSK F63 ROBOT (Kw 16) Edge Banding group (ready on board) with Glueing Unit (Hot Melt) VT 100 Edges (tape) thickness in rolls (min/max) mm 0,4 / 3 Qcfpt Edge coils supporting unit (Nr. 2 reels) OPTIONALS: Circular saw aggregate (diam. mm 200) Combined aggregate (Flush-Trimming/Scraping) Drilling Aggregate (with 4 horizontal boring spindles)

Year of construction: 2014, Condition: ready for operation (used), General Data Machine weight 10500 kg Control Unit Brand IMA Model ICOS CNC Main Drive Number of spindles 1 Spindle motor power 18 kW Number of axis 3 Movement X-Axis Movement 6300 mm Y-Axis Movement 1600 mm Z-Axis Movement 225 mm Bodoguovh8W Media Chip conveyor Yes Additional Equipment Compressed air via central connection Extraction via central connection Individual extraction units with automatic slide damming Tool/adapter changer magazines on the rear of the support with 18 pockets moving in the X and Y directions Vertical drilling unit with 21 spindles Attachment unit with drilling and routing head Gluing area Edge feeding unit for diode laser Edge thickness measuring device 4-fold roller magazine (traveling in X-direction) General Data Machine weight 10500 kg Control Unit Brand IMA Model ICOS CNC Main Drive Number of spindles 1 Spindle motor power 18 kW Number of axis 3 Movement X-Axis Movement 6300 mm Y-Axis Movement 1600 mm Z-Axis Movement 225 mm Media Chip conveyor Yes Additional Equipment Compressed air via central connection Extraction via central connection Individual extraction units with automatic slide damming Tool/adapter changer magazines on the rear of the support with 18 pockets moving in the X and Y directions Vertical drilling unit with 21 spindles Attachment unit with drilling and routing head Gluing area Edge feeding unit for diode laser Edge thickness measuring device 4-fold roller magazine (traveling in X-direction) This 3-axis IMA BIMA Gx50 E 160/630 CNC Processing Centre was manufactured in 2014. It features a robust heavy-duty design with a machining area of X=6300 mm, Y=1600 mm, and Z=225 mm. Equipped with an 18 kW main spindle, vertical drilling unit with 21 spindles, and a tool changer magazine with 18 pockets. Ideal for complex woodworking tasks, the IMA control system ensures precision. For more information about this Wood Processing Centre, please reach out to us. Application Types Wood Working

Condition: good (used), Year of construction: 2001, CNC machining center IMA BIMA P480V 180/480 Year of construction2001 - X = 2 x 2.400 - Y = 1,800 mm - Main spindle 12 kW - 18-fold tool changer - Gluing unit with 6-fold coil magazine D7Vzarc Alternative processing: - X = 2 x 2,400 - Y = 1,800 mm - Main spindle 12 kW - 18-position tool changer - Gluing unit with 6-fold coil magazine Working range: for standard machines Y = 1,800 mm Interchangeable table surface for interchangeable machining: X = 2 x 2,400 mm /milling and drilling processing X = 2 x 2,100 mm / gluing processing CNC line control IMATRONIC NT 231 automatic setting table with clamping plates main spindle 12 kW with integrated C-axis 360 degrees automatic tool/adapter unit changer 18-fold 1 VT100 edge banding unit with glue applicator Edge thickness: 0.4 - 3 mm for 4-sided edge banding and all-round edge banding with butt joint 6-fold roll magazine 1 snipping unit 0.8 kW Incl. adapter unit - Saw, 90 degree fixed - Horizontal trimming unit (corner release) - Chamfer trimming unit - Straight trimming unit - Profile scraper Location: Romania

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type, with Numerical Control ICOS-Open. Software IMAWOP + IMAwinCAD Working table with pods and rails. No. 6 Supports (rails) of lenght mm 1450 - DYNAPOINT Automatic deplacement by CNC (X axis) of the Supports/rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups Automatic Tools Changing System. Tools storage plate (No. 18 folds- positions) Max. useful working area (X - Y - Z) mm 6300 x 1450 x 100 Min. workpieces dimensions (X - Y - Z) mm 320 x 115 x 14 Max. workpieces dimensions (X - Y - Z) mm 5600 x 2100 x 38 Motorized carpet to evacuate chips and wastes Gxbwfmq Separate electric and command cabinet. Total installed power (Kw) 34 WORKING GROUPS (TOP): Vertical electro-spindle 1 x HSK F63 - electro-spindle motor power Kw 18 (S6) Circular Grooving Saw (90°) diam. (mm) 200 Edge Banding unit (always ready on board) - VT 100 Edge coils supporting unit (No. 2 reels) Combined aggregate (Flush-Trimming/Scraping) Workpieces Infeed system (to the Bima Cut) with Brush Table N° 6 Clamps to fix the panel and move it on to the machine (on top of the vacuum pods) Workpieces Outfeed (from Bima Cut) With motorized Rollers + Angular Transfer System

Year of construction: 2003, Condition: ready for operation (used), Control Unit Model IMATRONIC NT 231 Main Drive Spindle speed range 1500-24000 Movement X-Axis Movement 6000 mm Y-Axis Movement 1400 mm Z-Axis Movement 100 mm Additional Equipment 18-fold tool changer Vertical drilling unit Edge gluing unit Vacuum pumps Chip conveyor Bz0C3Napjg This CNC machining center with edge gluing was manufactured in 2003. Equipped with a CNC control IMATRONIC NT 231 and IMAWOP 4.0 on Windows 2000 Professional, it features a comprehensive editing area with dimensions X=6000mm, Y=1400mm, and Z1=100mm. It includes a robust 18-fold tool changer and a versatile edge gluing unit VT 100. Ideal for complex woodworking tasks, the IMA BIMA 410 / V Typ 140 / 600 machine we have for sale represents a significant opportunity. Contact us for further details. Application Types CNC Wood Machining

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control ICOS OPEN 231. Software IMAWOP Portal Loading and Unloading System No. 2 Working tables (with pods and rails), each one with No. 4 Support rails (tot. 8) DYNAPOINT LED system on the rails for the vacuum pods positioning (Y-axe) and on the basement for rails (X-axe) Automatic Tools Changing System. Tools storage plate (No. 2 x 18 of folds-positions) Max. useful working area (X - Y - Z) mm 5100 x 1400 x 180 Workpieces dimensions (X - Y - Z) 2 x (mm 2350 / 2200 x 1400 x 60) (N°) 2 Working Areas 2 x Vacuum pump (capacity m3/h). Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. WORKING GROUPS (TOP): No. 21 Independent vertical boring spindles (Drilling head motor-power: Kw 4 ca.) No. 1 Vertical electro-spindle (HSK F63) with motor power (Kw) 18. With C axe, 360° No. 1 Edge Banding unit (always ready on board) VT 100. Glueing Unit (Hot Melt glue) Cy8Bvvfnni Edges (tape) thickness in rolls (min/max) mm 0,4 / 3. Edge coils supporting unit (No. 2 reels) No. 2 Pre-End cutting (pre-snipping) Unit OPTIONAL: Circular saw aggregate (diam. mm 200) OPTIONAL: Combined aggregate (Flush-Trimming/Scraping) OPTIONAL: Drilling Aggregate (with 4 horizontal boring spindles)

Year of construction: 2004, Condition: ready for operation (used), Main Drive Spindle speed range 1500 - 24000 Spindle motor power 12 kW Tool taper HSK F63 = 38 mm Dpa38X Movement X-Axis Movement 6000 mm X-Axis Rapid Traverse 100 m/min Y-Axis Movement 1300 mm Z-Axis Movement 100 mm Z-Axis Rapid Traverse 25 m/min C-Axis Movement 360º Table Height adjustment 950 mm Tools Slots in storage 18 Max weight 6 kg Max tool diameter 100 mm Max tool length 150 mm Media Main electronic connection 3/N/PE, 400/230 V, 50 Hz This woodworking machine was manufactured in 2004. It features a robust 12 kW main spindle with a programmable speed range of 1500-24000 rpm and a tool holder HSK F63. The machine table includes 6 support arms and sets of suction plates, adjustable for various workpiece sizes. Additionally, it boasts a 100 m/min rapid traverse on the X-axis and an 18-fold tool change magazine. For more information about this woodworking machine, please reach out to us. Application Types Wood Working

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 5 axis (ROBOT head) Goose-neck type Numerical Control ICOS CNC - Software IMAWOP / (OPTION IMAwinCAD) Vs3A7A Safety cabin (enclosure) of the working head Working table with pods and rails- No. 8 Support rails LED system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates (No. 8 folds) + (No. 18 folds) Max. useful working area (X - Y - Z) mm 4300 x mm 1300 (mm 1410) x mm 350 No. 2 Working areas - Vacuum pump (capacity m3/h) 140 Separate electric and command cabinet. Total installed power (Kw) 23 WORKING GROUPS (TOP): No. 21 Independent vertical boring spindles No. 4 Independent horizontal boring spindles Drilling head motor-power (Kw) Kw 1,2 x 4 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 No. 1 Vertical electro-spindles ROBOT (HSK F63), motor power KW 9 Independent Z-axis with a stroke of 650 mm Axis A arranged / assembled at an angle of 90° to the C axis. Rotating range of the C-axis 420°, rotating range of the A-axis 140°