Used Magraf Fo-32 Endpaper Gluing Machine for sale (68,555)

Condition: new, Year of construction: 2025, ENDPAPER GLUING MACHINE MAGRAF FO-32 -minimum format of book block; 110x148mm -maximum format of book block; 225x320mm -maximum thickness of book block; 50mm -power supply; 220 V -input power; 0,1 kw Crodpfxsfhgzao Anfsc -weight; 75kg -dimension; 60c110c132cm

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Credpfxjy Uiyve Anfoc Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. The machine is ready for hot stamping and die cutting. Machine format: 32x46cm Press force: 60t Weight: 600gsm Operating speed: 4000 sheets/h This model is designed for hot stamping and features a large heating plate. Weight: 2300kg Cedpfx Aey E Exvonferc Holder manufactured by Hakro. Includes frame, fillers, and letterpress locks.

Condition: new, Year of construction: 2025, COMPLETE LINE FOR HARD COVER BOOKS including; 1. SEMIAUTOMATIC CASEMAKER MACHINE MAGRAF KO-50x70 PLUS 2. CASING-IN MACHINE MAGRAF UK-46 3.PRESSING AND JOINT FORMING MACHINE MAGRAF PK-50x40 PLUS 4.HEAD BENDING MACHINE MAGRAF KV-10 5.CORNERING MACHINE MAGRAF ZA-10 Codpfx Aedv Ea Ienferc 6.ENDPAPER GLUING MACHINE MAGRAF FO-32 All machines are new,produced in Croatia For other information please contact us MAGRAF

Condition: used, Year of construction: 2004, machine/vehicle number: 10720, working width: 1,300 mm, power: 3.2 kW (4.35 HP), table length: 400 mm, table width: 1,300 mm, number of rollers: 2, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Csdpfx Aney Uv Adjferc Working width max.: 1,300 mm Number of rollers: 2 Table width: 1,400 mm Table length: 400 mm MACHINE DETAILS Total power: 3.2 kW EQUIPMENT CE marking The machine will be sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8533

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Cedpfxsxgqmxe Anfjrc Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: good (used), CMC Italia Gemini Gem 52 Case in gluer Machine in perfect condition, like new. Manufactured by CMC Italia, Italy. This gluing device allows for the application of glue to both sides of the book block. Two gluers, smooth glue thickness adjustment. Chrome rollers, adjustable glue thickness. Very easy to clean. Working width: 520 mm Power supply: 380 V Weight: 250 kg Made in Italy. Crsdpfx Aney Sfb Refec

Condition: used, Rebar Bending Machine, Reinforcing Steel Bender, Pedax Special 32 S, Used Machine Manufacturer: Pedax Type: Special 32 S Codpfey R A Sdsx Anfsrc Overall dimensions: Width: 1090 mm Depth: 720 mm Height: 850 mm Weight: 391 kg Electrical data: 400 V; 6 A Maximum bending diameter: Ø 32 mm (single bar, for 450 N/mm² steel grade) Bending angle adjustment: Infinitely variable disc adjustment system Control system: Foot pedal operation

Condition: good (used), Sumbel Herold 500 Gluing Machine This machine is like new, fully functional and ready for production. This is the most valued brand among small laminating machines. Ideal for producing covers, decorative packaging, and more. Made in Germany. The machine operates on hot glue. It features a built-in heating plate and a water bath. Brass rollers. Infinitely adjustable: glue thickness, gap width, and speed. Working width: 500mm Power supply: 380V Cjdpfx Ansy Rdzaeforc Weight: 60kg

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Codpsx Upgcofx Anforc

Year of construction: 1996, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 637110, For Sale: Hunkeler VEA 3000 End Sheet Gluing Machine Manufacturer: Hunkeler Model: VEA 3000 Condition: Fully refurbished by the official manufacturer! (the restoration invoice and parts list are included in the photos) Year of Manufacture: 1996 The machine is in perfect condition with complete documents. A few years ago, the official manufacturer fully refurbished it, and it has barely been used since then. Sold directly by the seller Viewing and testing available on-site Csdpfxetx Thqj Anferc Consultations with our technician can also be arranged Currently, the machine is located in Lithuania, Kaunas

Condition: excellent (used), Kuper FWM 630 in excellent condition Csdpsy Swpmsfx Anfjrc

Condition: used, machine/vehicle number: 006290, Max working width: 1300 mm Credpju A Evhjfx Anfjc Max. machinable height: 100 mm No of Rollers: 2

Condition: excellent (used), Year of construction: 1997, Indexing table 400 mm hand Set tooling included Table bore 10 - 130 mm Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min; Table Ø: 690 x 460mm Codpfoxclfzsx Anfjrc Table load: 2000 Ram adjustment:0 - 425mm Length: 1300mm Width: 1100mm Height: 1400mm Weight: 1800kg

Condition: good (used), Year of construction: 2005, travel distance X-axis: 560 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 2,400 m/min, feed rate Y-axis: 2,400 m/min, feed rate Z-axis: 2,400 m/min, table width: 450 mm, table length: 950 mm, Fixed table 950 x 450 mm Feeds all direction ISO-40 and 3kW 3 Axis Digital Read Out Systsem CE-Safety  Coolant system with semi closed lower base  X-Axis: 560mm Crjdoxdltbjpfx Anfjc Y-Axis: 320mm Z-Axis: 400mm Table Length: 950mm Table Width: 450mm Table load: 350 Spindle speeds: 2240Rpm Feed rate X-Axis:2400mm/min. Feed rate Y-Axis:2400mm/min. Feed rate Z-Axis:2400mm/min. Stroke pinole: 0 - 95mm Length: 1800mm Width: 1600mm Height: 1900mm Weight: 1700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed Crsdewka S Iepfx Anfec - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 20131018, working width: 1,640 mm, compressed air connection: 6 bar, total width: 2,600 mm, total length: 12,500 mm, total height: 2,250 mm, overall weight: 7,100 kg, Fasson gluing machine with a working width from 150 mm up to a maximum of 1,640 mm. It can process corrugated or honeycomb board up to 20 mm thickness and cardboard from 350 g/m². Plate thickness: 8 mm, material: sponge/rubber foam. Power requirement: approx. 15 kW. Csdpfxoy R Emke Anfjrc

Condition: excellent (used), Year of construction: 2012, Ref:11095 . 2012 ‘Heidelberg’ Stahl TH82/442K-RFH High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SAK-66 shingle belt delivery table. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit. Credpfxsy Hixvj Anfoc VFZ mobile electronic ‘Z’ knife fold unit. Folding sequence: 1st buckle unit - with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - with 2 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 741883-01, Fisher + Rückle, Omnimaster 900, year of manufacture 2015 Veneer longitudinal splicing machine, bonding with urea glue, veneer thickness from 0.4-1.5 mm, feed speed: 5-50 m/min, dimensions (L x W x H): 2400 x 2000 x 1900 mm, weight approx. 1500 kg, connected load: 9 kW, electrical consumption approx. 4 kWh, compressed air: 5 NL/min, current 20A/300mA FI / RCD Location: Switzerland Cjdoy Idmkopfx Anforc

Condition: good (used), Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Csdpeyv Inzofx Anfsrc Overall dimensions mm 1800 x 1900 x 2100 h Weight kg 500

Condition: ready for operation (used), * Brand: Derrick Corporation * Type: F36-126D-3DD Credpfx Asywmzcenfsc * Surface: 3200 x 800 mm - 2 Decks * Driving: 1 vibration motor * On stock: 2 pieces

Condition: ready for operation (used), * Brand: Hein Lehmann * Type: LS 1.5-32 DD * Year of manufacture: 1998 - Overhauled in 2019 Crjdpfxsywmgfs Anfjc * Surface : 7600 x 1500mm - 2 decks * Driving: 45 kW E-motor * Weight: 12 Tons.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: SEM126/TH46098, Automatic Carton Folder Gluer, Max open blank width: 1100 mm, Min open blank width: 126 mm, Max feed up length: 800 mm, Min feed up length: 60 mm Stock : Cartonboard up to 800 gsm, Corrugated up to E flute.Max belt speed i: 425 m/min Cjdpfsv Ipl Tjx Anforc Complete with : Bottom belt feeder, Back lifters with vibration for smooth and consistent feeding, Pre-breaking system, Small box attachment - allowing min 76mm open blank width, Crash-lock module, Bottom left hand side glue pot, Three belt carrier folding section, Heavy duty Double Trombone delivery, Compression belt section, HHS C-1100 8 B cold glue system, 4 x HHS glue guns, Remote control, Manuals and electrical diagrams.

Year of construction: 1992, condition: used, You can check under power, after scheduling an appointment. Dismantling, moving and transporting the machine is entirely the customer's responsibility. We can help with loading as needed. Parity: EXW Székesfehérvár. TSUGAMI NP-32 CNC Lathe Machine Machining rangers Machining diameters 8 to 32 mm Maximum machining length 210 mm (one stroke) Maximum hole diameter 20 mm (drill) Maximum thread diameter M14 (tap) Slide travel X1 slide (front slide) 85 mm (80 + 5) X2 slide (rear slide) 115 mm (110 + 5) Z1 slide (headstock) 215 mm Cedpsidqvcefx Anfjrc Rapid-traverse speed For X1, X2 and Z1 slides 8m/min Main spindle Rotation speed For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless) For high-speed cutting (optional) 60 to 8,000 rpm (stepless) Bore diameter of chuckoperating tube 36 mm Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis) C-axis rapid-traverse speed -/60rpm Spindle-center height 900 mm Turrets Number of turrets 2 Number of tool-mounting stations 12 (6 stations x 2) Number of rotary-tool-mounting stations 12 (all stations on front and rear turret) Tool sizes Turning tools 16 (square) x 80 mm Drill-holder hole diameter 35 mm Indexing method Random Rotary-tool spindle speed For heavy cutting 224 to 2,240 rpm (stepless) For high-speed cutting 475 to 4,750 rpm (stepless) Machining rangers Machining diameters 8 to 32 mm Maximum machining length 210 mm (one stroke) Maximum hole diameter 20 mm (drill) Maximum thread diameter M14 (tap) Slide travel X1 slide (front slide) 85 mm (80 + 5) X2 slide (rear slide) 115 mm (110 + 5) Z1 slide (headstock) 215 mm Rapid-traverse speed For X1, X2 and Z1 slides 8m/min Main spindle Rotation speed For heavy-duty cutting (standard) 35 to 4,500 rpm (stepless) For high-speed cutting (optional) 60 to 8,000 rpm (stepless) Bore diameter of chuckoperating tube 36 mm Minimum indexable angle (commandable value in degrees) 5/0.00 (C-axis) C-axis rapid-traverse speed -/60rpm Spindle-center height 900 mm Size & weight of machne Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm Machine weight 3000 kg Required total electrical capacity 25 KVA Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm² Year of manufactured 1992 Serial number 9502 Sub-spindle Maximum thread diameter M12 (brass) Machining diameters 8 to 32 mm Spindle stroke (Z2-axis) 215 mm Spindle speed 300 to 3,000 rpm Spindle motor 1.5 kW 4P (inverter) Motors For main spindle 5.5/7.5 kW (AC spindle motor) For attachment drive: Front 0.75kW 4P (inverter type) Rear 1.5kW 4P (inverter type) For hydraulic motor 0.75kW 4P For coolant pump 0.25 kW For lubricating-oil pump 4 W Tanks For hydraulic oil 30 liters For coolant 150 liters For lubricating oil 2 liters Size & weight of machne Machine size ( L x D x H ) 2,900 x 1,650 x 1,615 mm Machine weight 3000 kg Required total electrical capacity 25 KVA Required air volume and pressure 100NL/min. at not less than 4.5 kg/cm² Year of manufactured 1992 Serial number 9502 Freight basis: EXW, unpackaged

Condition: used, Dieses Gerät trägt Klebstoff auf der Rückseite eines zu beleimenden Materials auf This device will carry adhesive on the back of a material to be glued Anleimmaschine  / Gluing Machine Tränklein AM500 Zweiwalzen-Anleimmaschine  / Two-roller Gluing Machine  Serial-No. 2535 Arbeitsbreite / Working width 500mm Arbeitsgeschwindigkeit / Working speed 4 - 20 m/min für Kaltleim / for cold glue Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Csdpfxjyq S Iys Anforc