Used Mark Msa 15 500Ad2000 for sale (20,236)

Condition: excellent (used), Year of construction: 2015, operating hours: 1,884 h, PROD. BRAND TYPE MSA 15 500AD2000 S/N CAI857781 YEAR 2015 POWER (kW) 15 CAPACITY (m3/min) 1.79 PRESSURE (bar) 10 HOURS (LOAD/TOTAL) 1884/8665 FREQUENCY INVERTER no BUILT-IN DRYER yes HEAT EXCHANGER no COOLING (AIR/WATER) air ON TANK yes, 500 l DOCUMENTATION yes NEW/USED USED Hodoyi A Aropfx Anyjt

Condition: excellent (used), Year of construction: 2013, volume flow: 2 m³/h, pressure (min.): 8 bar, MARK MSA 15 screw compressor 15 kW motor Capacity: 2.00 m3/min Pressure: 8 bar Year of manufacture: 2013 Net price: 8,500,- Gross price: 10,455,- Hjdpfx Aoy Uwi Eonyot Compressor is in fully working condition.

Condition: excellent (used), Year of construction: 2015, volume flow: 1.79 m³/h, pressure (min.): 10 bar, MARK MSA 15 screw compressor Mounted on 500 L pressure vessel Hodpfx Ajyui Acenyjt With refrigeration dryer 15 kW motor Capacity: 1.79 m3/min Pressure: 10 bar Operating hours: 14,100 Compressor fully functional

Condition: excellent (used), Year of construction: 2012, volume flow: 2.2 m³/h, pressure (min.): 8 bar, MARK MSA 15 IVR screw compressor Variable speed (inverter) Hsdpfev A U I Ajx Anyst 15 kw engine Efficiency 2.2 m3/min Pressure 8 bar Mileage 11285 mtg Fully functional compressor

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 330 kg, volume flow: 100.8 m³/h, pressure (max.): 10 bar, type of cooling: air, hopper volume: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK TYPE MSM15D TM500 S/N ITJ874646 YEAR 2024 CAPACITY (kW) 15 OUTPUT (m3/min) 1.68 m3/min CIS (bar) 10 BUILT-IN DEHUMIDIFIER YES ON 500L TANK Hjdpfx Aovrcnvjnyjt DOCUMENTS YES NEW/USED NEW

Condition: good (used), Year of construction: 2021, S015464 MANUFACTURER: MARK MODEL: MSM 15 SERIAL NO.: ITJ514259 YEAR: 2021 POWER (kW): 15 Hodpfsyh Rx Nex Anyjt CAPACITY (m³/min): 1.68 PRESSURE (bar): 10 OPERATING HOURS (LOAD/TOTAL): 948/1868 FREQUENCY INVERTER: no BUILT-IN DRYER: no

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Hjdpfoy H N Tmjx Anyjt Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: A20611RM1, working width: 1,150 mm, feed rate X-axis: 3 m/min, type of input current: three-phase, sheet thickness (max.): 150 mm, overall weight: 3,900 kg, input voltage: 400 V, nominal power (apparent): 86 kVA, compressed air connection: 6 bar, input frequency: 50 Hz, workpiece width (max.): 1,150 mm, grinding width: 1,150 mm, height adjustment type: pneumatic, input current: 400 A, The COSTA MSA 2 CCCS 1150 is an industrial wide belt sander with three working units, designed for professional deburring, calibration, and superfine finishing of metal parts. It is intended for high productivity and excellent surface quality when processing steel, stainless steel, and aluminum. The machine offers adjustable speed, robust industrial design, central extraction, and the option for fine-tuning the working process to meet the needs of any metalworking company. Hsdpfsxugxasx Anyet

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades - Smooth feed roller - 4 feed speed options - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland Hodpfx Anszulwzoyet – Used machine, condition: very good Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, drilling depth: 1,500 mm, feed length X-axis: 3,250 mm, feed length Y-axis: 1,500 mm, spindle speed (max.): 4,200 rpm, table load: 35,000 kg, CNC SELCA 4040 DH Maximum drilling depth in single cycle, V axis: 1,500 mm Column, longitudinal travel X axis: 3,250 mm Vertical travel Y axis: 1,500 mm Drilling slide, workpiece support movement W axis: 500 mm Maximum workpiece height: 2,400 mm Clamping table and workpiece approach movement U axis: 1,000 mm Controlled radial resolution, B axis: 360,000 divisions/rev Clamping table, rotating surface size: 1,600 x 1,800 mm Clamping table, max load with rotating workpiece: 20,000 kg Standard T-slot size: 22 mm Minimum–maximum solid drilling diameter: 5 – 50 mm Rapid feed rate, adjustable max speed: 8,000 mm/min Hjdeyymdiopfx Anyjt Drilling spindle rotation speed, adjustable: 1 – 4,200 rpm Drilling spindle motor power: 15 kW Gun drill tool holders: Shank for drill Ø < 6 mm: Ø 10 x 40 mm Shank for drill 6 mm < Ø < 25 mm: Ø 25 x 70 mm Shank for drill Ø > 25 mm: Ø 40 x 70 mm Dimensions and weights Width x Length x Height MF 1500 BB: 5,900 x 7,600 x 3,850 mm Total weight: 42,000 kg Oil tank capacity: 600 – 1,200 liters WORK SLIDE TILTING Minimum / maximum vertical inclination – A axis: +20° / -20° Continuous controlled radial resolution: 0.001° MILLING HEAD – ISO 50 spindle connection Max horizontal working stroke – Z + W axes: 1,000 mm Column longitudinal travel – X axis: 3,250 mm Drilling slide vertical travel – Y axis: 1,500 mm Spindle rotation speed, adjustable max: 2,500 rpm Spindle power (S1 duty): 17 kW Maximum spindle torque: 680 Nm ROTO-TRANSLATING CLAMPING TABLE Max clamping surface: 2,000 x 2,000 mm Max horizontal travel – U axis: 1,000 mm Continuous controlled radial resolution: 0.001° Max rotating workpiece load: 35,000 kg Standard T-slot size: 22 mm Machine complete with: • Remote electronic handwheel • ISO 50 tool changer magazine with 10 positions • Many tools and working equipment • Rack with various drills • User manual, maintenance manual, and CE conformity declaration

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 10,000 kg, Column lift rotating device, 15 tons lifting capacity, available as a set or individually. 2-sided drive. The machine is offered as a set in synchronized mode or individually. Protec reversing device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically powered, available at an extra cost. Lifting capacity 15,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1700 mm. Hjdpfx Anex Tig Hoyet Speed: 0.5 rpm. Clamping plate diameter: 900 mm. Rotating motion: 2 x 2.2 kW. Torque: 18,950 Nm. The machine is also offered individually as a mono model (more affordable). Optional with a universal joint flange (cardan flange).

Condition: good (used), Year of construction: 1995, Buigmachine voor buizen van MARK / Ridgid Type: 2H B Zonder gereedschap Hedpfozulzgjx Anyjt

Condition: excellent (used), For sale: a Grundfos SPK2-15/8 vertical multistage pump with a Grundfos MG 71A2-14FT85-B three-phase motor, rated at 0.37 kW. The pump is fully functional, tested, and ready for operation. It is designed for pumping coolants, emulsions, process water, and other liquids used in CNC machine tools and industrial installations. Normal signs of use are visible. Pump specifications: Manufacturer: Grundfos Model: SPK2-15/8 Version: AMA CVUV Flow rate: 15–35 l/min Head: 23–31 m Frequency: 50 Hz Motor specifications: Manufacturer: Grundfos Type: MG 71A2-14FT85-B Power: 0.37 kW Voltage: 3×200–220 V Δ / 346–380 V Y Frequency: 50 Hz Rated current: 1.92 / 1.10 A Hsdpfezn N Aujx Anyet Speed: 2800–2840 rpm Power factor (cos φ): 0.82–0.75 Ingress protection: IP54 Insulation class: F

Condition: excellent (used), For sale: SEW-EURODRIVE WA20/T DR63M6/BR/TH geared motor with a three-phase motor and a 24 V DC electromagnetic brake. The unit is fully functional, tested, and ready for operation. The technical condition is very good, with normal signs of use and minor scratches on the housing. Technical specifications: Manufacturer: SEW-EURODRIVE Gearbox model: WA20/T Motor type: DR63M6/BR/TH Power: 0.12 kW Supply voltage: 3×230/400 V Δ/Y Frequency: 50 Hz Current: 1.00 / 0.57 A Motor speed: 900 rpm Output speed: 15 rpm Torque: 32 Nm Gear ratio: i = 60.00 Ingress protection: IP54 Insulation class: F Hsdpfx Anezn Ngasyet Brake: 24 V DC Weight: 9.46 kg

Condition: excellent (used), For sale: SEW-Eurodrive WA20/T geared motor with a three-phase DR63M6/BR/TH motor and an integrated 24 V DC electromagnetic brake. The unit is 100% functional, tested, and ready for operation. Before sale, the geared motor was thoroughly inspected and operates flawlessly. The motor housing has some broken cooling fins, which are clearly shown in the pictures. This damage is purely mechanical and does not affect the proper operation, performance, or reliability of the unit. Apart from that, the geared motor shows normal signs of wear and tear resulting from use. Technical specifications: Manufacturer: SEW-Eurodrive Gearbox model: WA20/T Motor type: DR63M6/BR/TH Power: 0.12 kW Supply: 3×230/400 V AC, 50 Hz Motor speed: 900 rpm Output speed: 15 rpm Gear ratio: i = 60 Torque: 32 Nm Hodpeznaq Nefx Anyjt Electromagnetic brake: 24 V DC Protection class: IP54 Insulation class: F Rated current: 1.00 A (230 V Δ) / 0.57 A (400 V Y) Power factor (cos φ): 0.65 Duty cycle: S1 Weight: 9.46 kg

Condition: good (used), Bandall BA 24/15-30 Banding Machine One of the most recognizable banding machines in the world, a market leader. Manufactured by Bandall, the Netherlands. Machine in very good condition, recently serviced. Year of manufacture: 2016 The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone frame with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Controlled via an LCD panel. Technical specifications: Tape width: 30 mm Performance: 36 cycles/min Machine opening dimensions: 320 x 160 mm A roll of film is included. Hodpfx Anjzlgd Deyjt

Year of construction: 2023, condition: ready for operation (used), A Mark compressor unit including a Kaeser compressed air receiver is available. 1) Mark RMA 11 IVR compressor, year of manufacture: 2023, operating pressure: 7bar, max. pressure: 13bar, max. temperature: 43°C, power: 3kW, weight: approx. 250kg. 2) Kaeser 500/3110 compressed air receiver, year of manufacture: 1999, max. pressure: 11bar, max. temperature: 120°C, volume: 500l. Documentation available. An on-site inspection is possible. Hodezhw Tzopfx Anyet

Condition: excellent (used), For sale is a Ponndorf PX 15 peristaltic pump equipped with a Lenze geared motor with smooth speed control. This pump is designed for the precise transfer and dosing of liquids, where the medium only comes into contact with the flexible working hose. This solution ensures the safe pumping of aggressive, viscous, and solid-containing substances. The unit is mounted on a sturdy steel base and is sold as a complete set with the geared motor. The visual condition is as shown in the photos – normal signs of use. Technical data: Pump manufacturer: Ponndorf Handelsgesellschaft mbH Model: PX 15 Serial number: 3284 Pump type: peristaltic (hose) Geared motor manufacturer: Lenze Gearbox type: 11 712 02 10 Gear ratio: 10:1 Output speed range: 30–166 rpm Torque: 18–32 Nm Hodpszi Hc Iefx Anyjt Motor manufacturer: Hanning Elektro-Werke Motor power: 0.37 kW Supply voltage: 220/380 V Frequency: 50 Hz Protection class: IP54 Country of manufacture: Germany (West Germany) Application: The pump is designed for the transfer and dosing of: adhesives, paints and varnishes, resins, chemicals, detergents, syrups, sludges and sediments, lime milk, suspensions and liquids with fine solid particles. Key advantages: the medium only comes into contact with the working hose, dry running capability, self-priming, gentle pumping without damaging the medium, smooth performance adjustment thanks to the Lenze drive, robust construction made in Germany, easy operation and replacement of the working hose.

Condition: new, Year of construction: 2025, Laser source: 3kW Raycus Laser head: Raytools autofocus Control system: FSCUT 5000 A Loading of pipes up to 6400 mm long, unloading up to 4000 mm Positioning accuracy: ±0.05/1000 mm Acceleration: 1 m/s² Rotational speed: 120 rpm Max. positioning speed: 100 m/min Max. weight of a pipe: 250 kg Pipe diameter: 15-230 mm Hedpfxji Arwlo Anyot Overall machine size: 12728 × 3400 × 2450 mm

Condition: good (used), MARK ANDY XP 5000 / 13"  Year: 2008  Webwidth: 330mm / 13" Equipment:  UNWINDER  7 x FLEXO PRINTING  Add. 1 x WATER COOLING  2 x DIE-CUTTING  LABELSHIFTER  BST CAMERA  UV-DRYER  REWINDER  Web edge Control Hjdpfx Anetubz Aeyet  Control Panel  Optican for Sheeter  Lot off Printing/Magnetic Cylinder  Anilox

Condition: good (used), Year of construction: 2013, MARK ANDY XP 5000 / 13" - 4-color  Year: 2013  Webwidth: 330mm / 13" Equipment:  UNWINDER  4 x FLEXO PRINTING  BST CAMERA  UV-DRYER  HOT AIR  1 x DIE-CUTTING GAPMASTER  1 x DIECUTTING GAPMASTER  100% TUBE SCAN CONTROL  REWINDER  Web edge control  Control Panel  Lot off printing/magnetic cylinder  Anilox Please contact me if you have any questions. Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Hsdpfxotubz Uj Anyst Optical: 9/10 (cleaned and can go to end-user directly)

Year of construction: 2009, condition: used, Second-hand machine Environmentally friendly thanks to the use of R404A Energy savings thanks to a rotary refrigerant compressor (20–30% more efficient than (compared to a conventional piston) intelligent drainage system Hodpfxjzk Nrhe Anyst Max. operating pressure: 13 bar compressed air output 5,200 l/min 7,312 m²/hour Motor power 1.58 kW, 230 V Max. inlet temperature 55 °C Dimensions: 557 x 460 x 789 mm Availability: at short notice Storage location: Röllbach

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Hedpfxsxmt Eqo Anyot

Condition: like new (used), 15 linear meters of Nedcon tire racking New & used, see pictures. Height: 3 m Depth: 50 cm Beam length: 3.7 m, beams with load capacity/shelf: 1000 kg Frame: Blue Beams: Blue painted Negotiable price: € 1,150.00 net ex warehouse Offer includes: + 4 units of frames, pre-assembled, depth 50 cm, height 3 m + 18 units of beams, length 3.7 m, 1000 kg load capacity/shelf + 36 units of safety locking devices + 16 units of concrete anchors Goods are in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information upon request. We constantly have over 5,000 linear meters of pallet racking in stock from numerous manufacturers. (Subject to changes and errors in the technical data, information and prices as well as prior sale! See our terms and conditions, all prices excluding VAT ex warehouse) Lenox Trading – Top warehouse technology & used and new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse equipment in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel platforms immediately available • 30–50 semi-trailer truckloads of goods delivered weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION Hsdpfx Askkch Eenyet For dismantling and clearance orders, we offer a complete, all-inclusive package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission auction: Conducting auctions on behalf of customers. Our full-service through our own employees: Cataloging, office preparation, inspection, goods issue, logistics, dismantling and complete handover. Whether you found us through heavy-duty racking or are looking for heavy-duty racking galvanized / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, Linear actuator type DGE-25-1500-ZR-LK-RH-KF-GK -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM -Planetary gearbox: Neugart PLE 80 -Quantity: 5 pieces available Price: per piece -Dimensions: 1880/70/H340 mm Hjdpfx Aoud Urrjnyst -Weight: 12.7 kg/pc.