Used Homag Baz 324 for sale (468)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Working area X: 4000 mm Working area Y: 1600 mm C-axis electrospindle, power 11 kW, HSK 63F interface Bedsyprr Nopfx Agkjld Vertical drilling heads: 17 Horizontal drilling head with cross position + blade Milling and end-processing unit 360° gluing unit Combined edge trimming/scraper unit Edge band magazine with 2 positions 12-position rotary magazine Control: Power Control PC 85 WoodWop7.1 (update in 2018, paid approx. €9,500) Worktable with 8 beams and suction cups Elmo Rietschle vacuum pump Safety mats Chip conveyer belt

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 0-201-22-3325, functionality: fully functional, workpiece length (max.): 5,800 mm, workpiece width (max.): 1,200 mm, controller model: Homatic-CNC System PC83 mit Windows NT 4.0, feed rate X-axis: 80 m/min, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on 20/03/2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: - Saw and crosscutting unit for tool changer - Drilling and milling unit (4 spindles) for tool changer - Combination flush-trimming and finishing unit for tool changer - Blow-off nozzle for workpiece edge, compatible with tool changer Attention: Except for the units listed above, no vacuum suction cups, tools, or tool holders (even if visible in images) are included in the scope of delivery! TECHNICAL DETAILS Console clamping table "K": 12 adjustable consoles for holding vacuum cups with longitudinal and lateral stops, 4-fold occupancy - Max. workpiece length (single occupancy): 5,800 mm - Max. workpiece length (pendulum mode): 2,200 mm - Max. workpiece width: 1,200 mm - Max. workpiece thickness (using standard 100mm-high cups) with edge: 60 mm (if extraction hood is in position 1) - Max. workpiece thickness (using standard 100mm-high cups) without edge: 60 mm - Max. workpiece thickness (using standard 100mm-high cups) without edge: 120 mm (if extraction hood is in position 2) Support equipment - Drilling head: 17 vertical spindles - 2x main spindle 12 kW, water-cooled, for HSK (speed 18,000 rpm with C-axis and 12-position carousel tool changer) - Separate Y-axis for second main spindle and interface for aggregates with integrated pneumatic and electrical connections - Electronic supply and swivel drive - C-axis: swivel range without limitation Edge banding unit, 360°, for insertion into right main spindle - Max. edge height: 65 mm - Pickup station right, for depositing edge banding modules - Pre-cutting station and 3-position roller magazine Adapter units - Combination flush-/radius trimming and finishing unit (profile scraper knife) - Saw and crosscutting unit - 4-spindle drilling/milling unit (crosshead) - Blow-off nozzle for workpiece edge MACHINE DETAILS Blsdpfx Agoyic Tuekjd - Control: HOMATIC control PC 83 with Windows interface (NT 4.0) EQUIPMENT - WOODWOP programming system, version 5.0 - Network connection - Laser positioning aid - Chip conveyor - Safety: pressure-sensitive floor mats at front, side safety cage; rear: wall installation Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Working area X: 3225 mm Working area Y: 1500 mm Z-axis travel: 300 mm, maximum workpiece thickness 60 mm Bjdpfxoyl U Hbo Agkeld Work tables made of 6 support bars Machining unit, C-axis for 360° horizontal machining, tool holder HSK F63 Drilling unit: Vertical drilling head with 17 vertical spindles Saw blade aggregate, diameter 125 mm Horizontal trimming aggregate for lock cases with 4 spindles 12-position tool changer woodWOP 6.0 software Safety mat 1 vacuum pump Includes 2 aggregates (Flex5 and door routing), without suction cups! Machine in excellent condition Available June 2026

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-201-21-4348, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 5,800 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, workpiece length (max.): 5,860 mm, workpiece width (max.): 1,600 mm, controller manufacturer: HOMATIC, total height: 2,950 mm, total length: 11,500 mm, total width: 7,500 mm, controller model: PC85, spindle motor power: 7,500 W, Equipment: documentation/manual, HOMAG BAZ 722/58/K Gantry 4-Axis CNC Machine with 2 Shuttle Tables and Gluing Unit Year of manufacture: 2004 NOTE: The main spindle and the machine’s control computer were replaced approx. 2.5 years ago. Workpiece length X max. (with gluing unit) - max. 5660 mm with single loading - max. 2680 mm with pendulum (shuttle) operation Workpiece length max. (milling cutter D=25mm) - max. 5860 mm with single loading - max. 2870 mm with pendulum operation Workpiece width Y max.: - max. 1300 mm – all units - max. 1400 mm – with gluing unit - max. 1520 mm – with milling operation D=25 mm EQUIPMENT / SPECIFICATION Console Table / Vacuum System - 2 independently operating shuttle tables in Y-direction (2 Y-axes) - Both shuttles can be synchronized for machining large workpieces (single mode) - 6 movable consoles per shuttle (total 12), each with 1 longitudinal stop at the front - Each console fitted with a lifting rail mounted on the side - Console length 1340 mm - 3 retractable lateral stops (2 left, 1 right, mirror position) - Approx. 20 vacuum blocks 160x140 mm - 2 vacuum pumps, capacity 100/140 m3/h, 1 per field (left/right) Milling Spindle / Units / Tool Changer - Main spindle 7.5 kW (S6 or S1 mode), n max = 18000 rpm, vector-controlled - HSK F63 tool clamping - Liquid cooling with temperature monitoring - NOTE: The main spindle was replaced in 2021. - C-axis with unit interface - Auxiliary spindle with permanently mounted gluing unit (with its own X & C axis), 360° edge banding with butt joint gluing - Double edge roll magazines, automatic edge change - Fixed vertical drilling head with 12 spindles (individually selectable) / 6 spindles in X, 7 spindles in Y direction Drive motor 4 kW, 4500 – 6000 rpm - 18-position tool changer (carousel type) - Sawing and trimming unit for tool changer - Boring and milling unit with 4 spindles (2 x X-, 2 x Y-direction) - Combination flush trim and scraping knife unit Chip Disposal / Safety / Other - Chip conveyor integrated in machine body - Safety fence left and right of the machine, 1 access door with safety interlock - Extraction port Control / Software: • PowerControl PC85 operating system Bodjwpb Nfopfx Agksld NOTE: Both machine control computers were replaced in 2020. • WoodWop 5.0 • WoodScout • Power supply 400 V, 50/60 Hz • Cooling unit for control cabinet • Laser positioning Mr. BEAM Machine dimensions (occupied space after installation): L 1150 x W 700 x H 290 cm Availability: Immediately

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Bledpfxoqvnl Tj Agkod

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Machine number: 559969 Manufacturer: HOMAG Model: PROFI BAZ 723/42/18/KC Year of manufacture: 2004 Technical details: Weight approx.: 10000 [kg] control: PC85 [] Dimensions (l x w x h) approx.: 39000 x 3200 x 3200 [mm] c-axis: ja / yes [] software: WoodWOP [] working length x-axis: max. 4.200 [mm] working width y-axis: max. 2.075 [mm] main spindle: 2x 14,5 [kW] tool changer: 2x 18-fach / 2x 18-fold [] vacuum pump: 2x 100 [cbm/h] edge gluing unit: ja / yes 360° [] path-feed rate max. X-axis: 80 [m/min] path-feed rate max. Y-axis: 60 [m/min] path-feed rate max. Z-axis: 40 [m/min] Item Description Blodpfx Asxvy Ukogksd High-End-equipped, technically well maintained HOMAG PROFI BAZ 723/42/18/KC CNC Machining Center in portal design with 360° edge glueing unit, 2 main spindle with C-axis, automatically positionable clamping consoles and HOAMG Optimat TBP 370 vacuum feeder in in portal design. The original price was approx. 620.000 EUR. Technical data and equipment of the HOMAG Profi BAZ 723 CNC: - Workpiece length for single operation max. 4.200 mm - Workpiece length cutter Ø 25 mm for pendulum operation max. 2.040 mm - Workpiece length glueing for pendulum operation max. 1.850 mm - Workpiece width (cutter Ø 25 mm) max. 2.075 mm - Workpiece width (glueing) max. 1.950 mm - Workpiece width (all aggregates) max. 1.850 mm - Console table KC-System 2 pieces left/right automatic positioning of the consoles and vacuum clamps - First main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Second main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Edge gluing aggregate 360° glue with butt joint mounted on the right side of the portal with Y-axis drive Drive spindle with C-axis edge height max. 65 mm edge thickness 0,4 - 3 mm pre-cutting station and 2-fold roller magazine - Chip conveyor belt for automatic disposal with ascending conveyor (The tools, the HSK holders and the units for the tool changer are not included within delivery. A transport rack from HOMAG is required for transportation of the dismantled machine. Terms of payment and delivery Delivery terms: ex foundation, unpackaged Payment terms: 100% before loading Warranty: Without any warranty

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 0-201-09-5124, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, controller model: Homatic PC 85 Power Control, TECHNICAL DETAILS X-axis working range: 6,000 mm Y-axis working range: 1,650 mm – up to 1,750 mm for milling Max. travel height during edge banding: 60 mm Max. applicable edge height: 65 mm Minimum internal radius: 30 mm Automatic tool changer: 18 positions Drilling head: 27 spindles (4 kW) Bljdpsydl Nwsfx Agksd Max. unit saw blade diameter: 200 mm MACHINE DETAILS Control system: Homatic PC 85 Power Control Software: WoodWop Electrospindle C Vector: 11 kW, HSK F63 Edge specification: Rolls, PVC / ABS 0.4 - 3 mm EQUIPMENT 10 adjustable support rails for vacuum cups Loading and unloading aid with 8 pneumatic rods Vacuum cup positioning with laser system Edge banding unit with 360° rotation, glue pot, and preheater for granular EVA glue Rubber-coated pressure roller + Rubber-coated pressure roller Preheating lamp Edge trimmer and edge scraper Edge holder magazine Front and side safety system with carpets Protective cage around access area Chip extraction with motorized conveyor belt Air conditioning for machine control cabinet Automatic lubrication system Vacuum pump

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with FLEX 5) Gantry-drive (axe X) machine Numerical Control Control Powertouch (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 8 Table dimensions (mm) 1340 Automatic deplacement by CNC (X axis) of the Supports rails LED system (on the rails) for the vacuum pods positioning Clamps for workpieces fixing - POWERCLAMP Automatic Tools Changing System Tools storage plate (No. of folds-positions) 18 Max. useful working area (X - Y - Z) mm 4000 x mm 1550 x mm 60 Max. useful working area (X - Y - Z) in edge banding (mm) 4000 x mm 1500 x mm 60 No. 2 Working areas - Vacuum pump (capacity m3/h) 100/140 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes Total installed power (52 A) WORKING GROUPS (TOP): No. 17 Independent vertical boring spindles (High Speed 7500) No. 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Bodew Dc Niopfx Agkeld Drilling head motor-power (Kw) 2,2 No. 1 Vertical electro-spindles HSK63. Vertical electro-spindles motor power (KW 15) No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 1 reels/Coils) Pre-End cutting unit Crosshead aggregate (4 horizontal drilling spindles) N° 1 Circular saw aggregate (diam. mm 125) Combined aggregate (Flush-Trimming/Scraping)

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type - Front emergency carpets Numerical Control Type PowerControl PC 85 - Software WoodWop No. 10 Supports/Rails (mm 1340) LED system (on the rails) for the vacuum pods positioning Automatic Tools Changing System (Store at No. 18 folds) Max. useful working area (X - Y - Z) mm 6175 x 1550 x 60 Max. useful working area (X - Y - Z) in edge banding mm 6000 x 1475 x 60 No. 2 Working areas - No. 2 Vacuum pumps (capacity m3/h 100 each) Motorized carpet to evacuate the wastes from the working process Total installed power KW 27 Working groups (top) No. 17 Independent vertical boring spindles (power of the drilling head Kw 2,2) No. 4 Independent horizontal boring spindles No. 1 Vertical main Electro-spindle HSK F63 Kw 11 No. 1 Circular Saw 0°-90°) diam. (mm) 125 No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Bodpfxsh Ucn Re Agksld Edge coils supporting unit (N. 2 reels/Coils)

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 0-201-25-5219, functionality: fully functional, input frequency: 50 Hz, travel distance X-axis: 4,800 mm, travel distance Y-axis: 1,400 mm, Equipment: rotational speed infinitely variable, No reserve price – guaranteed sale to the highest bidder! Bidding obligates timely collection by the end of August! TECHNICAL DETAILS Blsdjw Ekkkspfx Agkjd Travel distances X-axis travel: 4,800 mm Y-axis travel: 1,400 mm MACHINE DETAILS Electrical data Supply voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated current: 53 A Fuse: 63 A Control voltage: 24 V Type of input current: Three-phase EQUIPMENT Continuously adjustable spindle speed Edge processing unit

Condition: used, functionality: unexamined, Ferwood Code: RU0010812 - Manufacturer Code: 1-056-08-3420 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Bodpfx Ajv Iz Ugegkold

Condition: ready for operation (used), Year of construction: 1998, Homag Processing Center Genius BAZ20/30/14/D Electronically controlled milling and edge-banding machine, post-processing, and drilling center designed for batch production of furniture parts, solid wood, or similar materials. Base Machine: - Heavy-duty, stable machine bed with a compact linear guide system. - Aggregate carrier with linear guide system, ball screw, and digital AC servo motor for Z-axis positioning, travel distance 340 mm - Automatic central lubrication for all drives and linear guides - Designed for the attachment of various table configurations Control System: Wood Wop 5.0 - Enlarged Z-axis travel, 500 mm - Extended safety step mat - Manual through-feed table B20/30+40/…/D - Motorized width adjustment of the longitudinal console D-table - Chip conveyor belt for B../30+40/K - Stop pins for laminate overhang - Main spindle, 12 kW - Chain tool changer, 70 positions for B20, for HSK 63 F tools - Aggregate interface for main spindle - Electrical/electronic interface 220/24 volt - Edge gluing aggregate, 4 sides for main spindle - Melting unit with granulate container - External automatic triple edge changer - Rack changer system for aggregates and tools - Rabbet pressure zone for main spindle - Flush trimming unit for tool changer - Saw and crosscut unit for tool changer - Boring/milling unit with 4 spindles for tool changer - Lock case milling unit for rotary magazine - Vertical milling unit with tracing ring - Sanding unit with air blast nozzle - CNC programming system Wood-Wop - Post-processor for BAZ - Free-standing control panel Location: Ex works, customer site - Immediately available - Bsdpfxex Nrk Hs Agkold Machine must be dismantled by the buyer.

Condition: ready for operation (used), Year of construction: 2003, number of axes: 4, spindle speed (max.): 18,000 rpm, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. • Control/Software: Homatic CNC control; WOODWOP CNC programming system; Postprocessor • Workpiece capacity: • Length 800–3000 mm; Width 350–1400 mm; Thickness max. 70 mm with edge / 80 mm milling • Frieze width min. 120 mm; Weight max. 150 kg • Table/Clamping: • Continuous table (D-table) • Longitudinal console 1 fixed; Longitudinal console 2 manual Y-width adjustment Blsdpfjx D Ribex Agked • 8 vacuum clamps 125 x 50 x 100 mm • Working height lower edge of workpiece 950 mm • Unit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop bolt for top layer overhang: Lifting/rotating device, max. 20 mm top layer, stroke 110 mm, individually selectable, end-position monitored (for manual door placement) • Main spindle: • Speed 1500–18000 rpm (VFD 15 kW), full rated power from 12000 rpm • Tool diameter max. 180 mm (milling) / 200 mm (grinding); Room extraction for all tools/units • Aggregate interface/C-axis: • Pneumatic and swivel drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disk changer for HSK F63; tool weight 6 kg; tool length max. 200 mm • Configurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mm • Changer raisable for traveling pickup (left side) • Units/aggregates (for tool changer unless noted): • Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axis • Swiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivel • Milling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mm • Flush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoes • WPL knife head: run-out angle 5°, Ø 70 mm • Gluing/edgebanding equipment: • Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axis • Gluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivation • Edge hold-down device, manual adjustment • Magazine/pickup: • Pickup space on X-support for interchangeable special unit (e.g.

Condition: used, Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 280 mm -Table surface: 3240 x 295 mm Blodpfjb Uhpbox Agked -Table thickness: 20 mm -Price: per piece -Number: 2x available -Dimensions: 3240/295/H280 mm -Weight: 330 kg

Year of construction: 2002, condition: ready for operation (used), Main Drive Bljdpfex D Dvnex Agked Number of axis 4 This HOMAG Optimat BAZ41/30/K Event was manufactured in 2002. A used CNC processing center with a working area of 3000 x 1050 mm. Consider the opportunity to buy this HOMAG Optimat BAZ41/30/K Event CNC processing center. Contact us for more information. Application Types CNC Wood Machining

Condition: used, Year of construction: 2000, The HOMAG BOF 31/40/G is an industrial CNC machining center designed for precise sizing, drilling, and milling of panel components in furniture manufacturing. BOF series machines are robust production centers suitable for both series and flexible manufacturing of furniture parts. Blsdpsynb N Ujfx Agked This model is conceived as a universal production cell with options for automation and integration into HOMAG production lines.

Condition: used, machine/vehicle number: 008167, X axis working area: 6000 mm Bodpfox A Hczsx Agkjld Y axis working area: 1750 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 30 Total number of tool changer positions: 72

Condition: like new (used), Year of construction: 2019, used vertical CNC machining center Manufacturer: Homag Model: Drillteq V-500 Edition25 Main operating hours: approx. 1,800 hours Working range X: 200 – 3,050 mm Working range Y: 70 – 850 mm Working range Z: 12 – 60 mm, special workpiece thickness: 8 mm Vertical drilling spindles: 15 pcs Horizontal drilling spindles in X: 6 pcs Horizontal drilling spindles in Y: 4 pcs Grooving saw, swiveling 90° Grooving/milling unit for Clamex-P Dowel insertion stations (white glue) Milling spindle: 10 kW; 1,250 – 24,000 rpm 4-position tool changer (ATC) Bledpfxeymz Rvs Agkod Workpiece clamping system with collet chuck Workpiece length: 3,050 mm Workpiece width: 50 – 1,250 mm Workpiece thickness: 8 – 80 mm; max. 60 kg weight CONTROL: POWERCONTROL PC86 power touch with FullHD multitouch display 21.5″, operating system Windows 10 Network connection, Tapio ready, fully prepared WoodWop 7.0 incl. MDC and production list software Basic barcode reading system Delivery includes only all tools and HSK holders shown in the photos!

Condition: used, Year of construction: 2018, max. workpiece length 4200 mm profile spindle 1 Stück main drive 15 kW HOMAG CNC Machining Center BMG310/42/F/K, Year of Manufacture 2018 ----- This machine is part of the sale of a complete window manufacturing business, see stock number 1305-6979. Machines still connected and ready for demonstration Technical specifications: ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth - 32-position disc changer - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles Bledeyn R Iaspfx Agkjd - 6 lift rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows For a detailed description, please see the attached PDF document! ----- Price: on request! Options with additional costs: ----- - Used Leitz tools for Homag with curved tooling, compatible with SCM Windor 40 R systems #1305-6993. Price: 12.000 Euro - Barbaric vacuum lifter, manufactured in 2015. Price: 4.500 Euro - used Löwer MZP 1 mini fingerjointing press for arched windows Price: 1.000 Euro (Technical specifications according to the manufacturer, without guarantee!)

Condition: like new (used), Year of construction: 2021, Used CNC machining center Manufacturer: Homag Model: Drillteq V-200 (Optimat BHX 055) Year of manufacture: 2021 X-axis working range: 200 – 3050 mm Bledeymzkvopfx Agkjd Y-axis working range: 70 – 850 mm Z-axis working range: 12 – 60 mm, special workpiece thickness: 8 mm Vertical drilling spindles: 13 pcs. Horizontal drilling spindles in X: 4 pcs. Horizontal drilling spindles in Y: 2 pcs. Grooving saw in X direction Milling spindle: 10 kW; 1,250 – 24,000 rpm 4-position tool changer (ATC) Workpiece clamping system with collet Max. workpiece length: 3050 mm Workpiece width: 70 – 850 mm Workpiece thickness: 8 – 56 mm; max. weight: 35 kg POWERCONTROL PC86 power touch control unit with Full HD multi-touch 24″ display, operating system Windows 10 Network connection, Tapio-ready prepared WoodWop 7.0 including MDE and production list software BASIC barcode reading system Delivery exclusively includes all tools and HSK holders shown!

Condition: like new (used), Year of construction: 2020, machine/vehicle number: 0-240-75-0703, functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, NEW PRICE ONLY 79,900 EURO!!! Offer valid only until March 21, 2026! Don’t miss this opportunity! We invite you to purchase a BRAND NEW, outstanding HOMAG SAW-TEC B-400 Pro Line panel saw—extended version for automatic storage handling. The SAWTEQ B-400 is a HOMAG panel saw with automatic loading, executing cuts at high speed. This efficient model is designed for processing large volumes of panels, ensuring high-quality finish cuts. It is recognized for its reliability, precision, robust power, and fast operation. The saw offered is BRAND NEW. Purchased from HOMAG POLSKA Sp. z o.o. in 2020, it was delivered directly to our site by the manufacturer. The machine was only started once by the HOMAG POLSKA Sp. z o.o. service team and has not been used since. The HOMAG brand requires no introduction—globally acknowledged as a leader in state-of-the-art, high-quality machinery. This model is exceptionally well-equipped; it has all key options. A basic saw of this type costs from 100,000–110,000 EURO net (425,000–467,500 PLN net)*, while our extended version—prepared for automatic storage and additional equipment—has a new price of about 190,000 EURO net (807,500 PLN net)*. Key Benefits - High throughput thanks to automatic loading and significant saw blade projection. - High productivity, low space requirement. - Designed for optimized material flow and precise logistics. - Ready for integration into networked production environments. We have direct access and support from HOMAG for installation and commissioning should this be needed at the buyer’s site. Our price is over 45% below new—making this an exceptionally attractive offer for anyone seeking a modern saw compatible with automatic storage, or for buyers anticipating future need for this option. The savings, compared to new, are around 90,000 EURO net (approx. 400,000 PLN net)*. The saw can, of course, also be operated without connecting to an automatic storage system. General sale information: - The machine is BRAND NEW, manufactured in 2020, but is sold without warranty or guarantee. - Returns are not accepted. - The listed price is net; VAT (23% for Polish purchasers) will be added—please note how price is stated in the offer. Bedeyn Rzmopfx Agkeld - Single owner. * Euro prices are converted at the NBP rate of 1 EUR = 4.25 PLN. Welcome, MachineSeeker users! We are new to MACHINESEEKER. We are not a furniture, manufacturing, or machinery trading company. We own numerous properties in Poland and are a property developer building houses and apartments in Warsaw, the capital of Poland. The machines in our listings are our own property, acquired as settlements from tenants in the furniture industry. We know their history and condition, which we describe accurately. We maintain relationships with machine manufacturers who can provide further support—Homag, Otto Martin, OMC Machinery, and FANUM. As we do not require these machines, our prices are very attractive, especially considering their almost-new condition. We can assist with transportation throughout Poland or the EU. Viewing before purchase is very welcome. Kind regards.

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, The machine has been used very little and is in excellent condition. Everything works perfectly, just like new. It is connected and can be tested at any time. Bedpfxjyn Eq Ne Agkjld

Condition: used, machine/vehicle number: 006849, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Bjdpfjwd Itmex Agksld Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), Year of construction: 2013, Used 5-axis CNC machining center Manufacturer: Homag Model: PROFI BMG 511/40/15/F/K Year of manufacture: 2013 5-axis spindle 15 kW, Drive5C+ MPU drilling head with 30 spindles, 360° Vertical drilling spindles: 20 Horizontal drilling spindles: 10 Additional routing spindle: 6 kW Speed Pack 18-position disc tool changer D=130 below PickUP station for saw blade 350 mm Tool transfer station Workpiece length: All units: Single 4,000 mm, pendulum 2,250 mm, min. 500 mm Tool diameter 25 mm: Single 4,175 mm, pendulum 2,250 mm, min. 500 mm Workpiece width: Rear stop: 1,900 mm Front stop, all units: 1,450 mm; with tool diameter 25 mm: 1,675 mm – Workpiece thickness: – Max. 300 mm including clamping devices – Up to 60 mm with standard clamps Console table with 10 movable consoles, each with 2 suction cups, side and longitudinal stops, LED position display for vacuum suction cups 14* for laminate overhang; Bledpfx Agjym Am Sskjd 10 extraction rails, connection for Power-Clamp, vacuum connection for templates SAFETY AND PROTECTIVE DEVICES: CE Compliant; SAFETY FENCING ON THE RIGHT WITH DOOR Equipment: DRILLING HEAD 30 SPINDLES: V20 / H10/ S360° “MPU” 10 HORIZONTAL SPINDLES GROOVING AND SEPARATING SAW ADDITIONAL ROUTING SPINDLE 6 KW FOR MPU DRILLING HEAD DRILLING/MILLING UNIT 4-SPINDLE FOR TOOL CHANGER MACHINING SPINDLE 15 KW DRIVE5C+ AGGREGATE INTERFACE DRIVE5C+ TOOL MEASURING PROBE FOR TOOL CHANGER SOFTWARE FOR POSITION MEASUREMENT & CNC AXIS ROTATION TOOL TRANSFER STATION 18-POSITION DISC TOOL CHANGER D=130 BELOW PICKUP STATION FOR 350 MM SAW BLADE FOR DRIVE5(C)+ COOLANT TANK FOR MACHINING SPINDLE VACUUM PUMP 300/360 M³/H Control: POWERCONTROL PC85 WITH POWERTOUCH CONTROL SYSTEM; IPC POWERPACK, OPERATOR CONSOLE FOR PROGRAM START; CAMERA SYSTEM WITH TABLET PC WOODWOP CAD/CAM INTERFACE STANDARD DOCUMENTATION AND CONTROL TEXTS: GERMAN Delivery includes only the depicted tools and HSK holders!

Condition: used, Year of construction: 2011, max. workpiece length 6000 mm profile spindle 2 Stück main drive 18,5 kW Very well-maintained Homag Profi BMB 922/35/13/B CNC machining center with automatic loading and unloading For machining timber for windows, frame doors, or similar workpieces made of wood or wood-based materials. Detailed description in the accompanying PDF file! HIGHLIGHTS: ----- - Workpiece length up to 6000 mm (with regripping); Workpiece width up to 300 mm for machining individual parts, door leaves up to 1,300 mm on additional crossbeams, workpiece thickness up to 150 mm - Automatic loading and unloading of individual parts, buffer with 2 m depth - Automatic positioning of collets, automatic reclamping Interior/exterior profiling Bjdpfxoymf Eqe Agksld - 2 x 4-axis high-performance spindles with HSK 63 F taper with C-axis - C-axis extension for Flex5+ unit - Fixed drilling head with 13 spindles V9/H4: with 9 individually selectable vertical drilling spindles and 2 horizontal drilling spindles with dual output, 1 in the X direction and 1 in the Y direction - 18-position disc tool changer - 72-position chain tool changer - Additional console table for machining special forms and arches including various vacuum clamps and PowerClamp clamping system for the additional console table. With Lasersystem "Mr. Beam" - Vacuum pump - Chip conveyor belt - Including interchangeable units (saw unit, lock case unit, dowel drilling unit 3 + 1, drilling and milling unit 4 spindles, FLEX 5 unit) - OPTIONAL window tools: • Wooden windows IV 67/77/89 – Year 2011 • Front door IV 67/77/89 – Year 2011 • Lift-and-slide windows IV 67/77/89 – Year 2011 • Wood-aluminum windows 67/77 – Year 2018 • Wood-aluminum front door 67/77 – Year 2018 Machine in operation until approximately October 2026 and available for viewing! Detailed technical description, window cross-sections, and prices available upon request! aktuelles Video siehe nebenstehend/current video of the machine attached: Sequenzen Video: Minute 0:00 - 2:08: komplette Maschinenansicht_compplete machine view Minute 2:08 - 12:21: Fensterfertitung gerade Teile_window production straigth elements Minute 12:21 - 14:45: Sonderfensterproduktion Zusatztisch_special window production on additonal table (Technical specifications according to the manufacturer - without guarantee!)