Used Mas Mt32 Nc for sale (6,912)

Condition: excellent (used), Swing over bed 320 mm Distance between centers 800 mm Spindle speeds -4000 rpm Control: HEIDENHAIN Manual Plus M Misc. accessories MARCELS MASCHINEN CH Credpsi Ezhqjfx Af Aod

Condition: excellent (used), Year of construction: 2004, Control system: Heidenhain Working area Swinging diameter over bed: 320 mm Swinging diameter over carriage: 150 mm Distance between centers: 800 mm Cedpfxozdp Txs Af Aerd Working spindle Spindle mount according to DIN 55027: B6 Spindle bore: 50 mm Spindle taper, metric: 60 Main drive Motor power at speed 1500 min-1: 7 kW Spindle speed range, 1st gear: 0 - 1000 min-1 Spindle speed range, 2nd gear: 20 - 4000 min-1 Max. spindle torque 1st gear: 360 Nm 2nd gear: 90 Nm X-axis Max. travel: 190 mm Rapid traverse: 5000 mm/min Max. feed force: 3000 N Z-axis Max. travel of bed carriage: 750 mm Rapid traverse: 8000 mm/min Max. feed force: 5000 N Quick-change tool holder MULTIFIX B Max. steel diameter: 25 x 25 mm Tailstock Diameter of quill: 65 mm Quill travel: 120 mm Internal taper of quill – Morse: 4 Machine dimensions Length: 2180 mm Width: 1341 mm Height: 1775 mm Machine weight: 2150 kg Power requirement: 21 kVA

Year of construction: 2009, condition: excellent (used), MASS NC steep conveyor, angle conveyor Angle conveyor belt with substructure Crodjpby Uropfx Af Aod Conveyor belt length: 1,500mm flat + 1500mm rising. Dropping height: approx. 1400mmmm. Description: available immediately, Ready to ship more pieces Belt speed: 7m/min T 30 studs Welded stud height 30 mm Drive: 0.37 kw 380V 50Hz Height-adjustable angle conveyor belt with adjustable angles Feed part 1500 mm Riser section 1500 mm Usable width 850 mm Stud height 30 mm Belt speed: 7m/min Standard control with emergency stop/stop button External width 950 mm (without motor) PU strap color green L studs Stud spacing approx. 450 mm Stud height 30 mm Standard control with emergency stop/stop button mobile on steerable stop rollers Lateral collecting plates in the feed section

Condition: good (used), Tool trolley with inserts Crsdpfx Afozhi Tms Asd with turning holder for NC lathe, Shaft: 50 mm

Condition: new, New equipment MASS International Angled conveyor / flow conveyor L - Conveyor belt with a fixed angle of 35° available for short-term delivery Crsdpjhm Axgofx Af Asd MASS International Angled conveyor NC1 Conveyor belt with a fixed angle and collection trays in the infeed section Example as shown: NC 1 Infeed section 600 mm Inclined section 1300 mm Usable width 250 mm External width 305 mm (without motor) Height adjustable, discharge height 750 - 1050 mm Fixed angle between the infeed and inclined sections Adjustable inclination Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Optional: Other dimensions, see standard delivery list Dimensions according to customer requirements FDA-compliant belt Modified belt speed etc.

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: 12.0273 / 121V0308, spindle bore: 128 mm, turning diameter: 530 mm, center width: 3,000 mm, turning diameter over bed slide: 830 mm, spindle speed (min.): 1,800 rpm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect the machine punctually between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Max. machining diameter: 530 mm Swing diameter over bed: 820 mm Swing diameter over cross slide: 530 mm Distance between centers: 3,000 mm WORK SPINDLE Front spindle nose (DIN 55027, 55029): B11 / C11 Spindle bore: 128 mm Taper in spindle (metric): 132 mm Control: HEIDENHAIN MP620 Spindle speed range: 0–400 / 20–1,800 rpm Torque level 1: 2,150 Nm Torque level 2: 430 Nm X-AXIS Travel: 370 mm Ballscrew diameter/pitch: 32/5 mm Rapid traverse: 10 m/min Max. feed force: 10 kN Repeatability of positioning: 0.01 mm Z-AXIS Ballscrew diameter/pitch: 50/10 mm Credpfswu E Icjx Af Ajd Stroke: 3,000 mm Rapid traverse: 10 m/min Max. feed force: 20 kN Repeatability of positioning: 0.015 mm TOOL TURRET Type: Multifix D Tool profile: 40 x 40 mm TAILSTOCK Tailstock quill diameter: 115 mm Quill stroke: 225 mm Morse taper in quill: Morse 6 MACHINE DETAILS Connection voltage: TN-C 400/230 V Frequency: 50 Hz Installation dimensions: 5,000 x 2,200 x 1,900 mm Weight: 5,300 kg Connected load: 38 kVA EQUIPMENT With technical documentation Coolant tank capacity: 200 l Chip conveyor capacity: 160 l

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, The angle conveyor from MASS is for sale: Type NC - SPEC 500/1800 x 600 Infeed section: 500 mm Incline section: 1800 mm Usable width: 600 mm, total width: 750 mm Conveyor speed (constant): 6 m/min Csdpfxjw Nrpbj Af Aord Mobile base frame with brake rollers Discharge height: max. 1500 mm, min. 1100 mm Side guide: 60 mm PU belt with 30 mm cleat height, temperature resistant from -10°C to +90°C Motor protection switch with 5 m cable & CEE plug

Condition: used, functionality: fully functional, Year of construction: 1998, control type: NC control, actuation type: electric, working width: 2,000 mm, sheet thickness (max.): 5 mm, power: 5 kW (6.80 HP), Equipment: CE marking, documentation/manual, foot remote control, We are offering this ready-to-use SCHRÖDER MAK 3 2000X5 NC swivel bending machine, manufactured in 1998. The machine is fully functional. Crodszdzm Dspfx Af Aod It exhibits some inaccuracies due to its age, but it is perfectly adequate for many applications. If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Min. Pipe length: 100-1800 mm The system was previously used for deburring cut pipes! Csdpfx Ajq U Rccsf Ajrd

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Mannesmann Demag, control electronic modules from injection molding machine D 100-275 NC -Card holder: Murrelektronik 630055 -Control card: Philips 9404 780 020 -Individual components: see photos -Price/sale: complete Codpjn Hbc Ijfx Af Aord -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control electronic modules from injection molding machine Demag D 100-275 NC -Card holder: Murrelektronik 630055 -Control card: Philips 9404 780 020 -Individual components: see photos Credpfx Aon Hbckef Ajd -Price/sale: complete -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg

Condition: new, Year of construction: 2024, Grinding wheel D x B 455 x 255 mm, workpiece diameter 1 - 60 mm, regulating wheel D x B 255 x 255 mm, regulating wheel speed 10 - 100 rpm, drive power 11 kW, weight approx. 3.7 tons, dimensions approx. 2,700 x 1,700 mm Machine suitable for continuous and plunge grinding, hardened and ground guideways, grinding and regulating spindle with hydrodynamic three-point bearing, central lubrication for slides and feed spindles, regulating wheel drive via DS motor, frequency-controlled, hydraulic dressing devices for grinding and regulating wheel, electrical equipment predominantly with Siemens components, electrical control cabinet assembled in Germany, Credodlgq Uspfx Af Aod GC 1810-NC with stepper motor and Siemens S7 control for plunge and feed movement. Very economical price/performance ratio.

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Cedpfszhlfrjx Af Aord Equipment: Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Condition: new, MASTERWOOD CNC Machining Center Type MVD 900 - Edition Partnership - Showroom Machine Through-feed processing, Ball screw drives on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in the X direction, Pick-up tool changer, Automatic central lubrication, Sensor for panel measurement ----- Technical Data ----- Min. workpiece length X: 250 mm Min. workpiece length Y: 80 mm Min. workpiece thickness: 10 mm Max. workpiece length X: unlimited mm Max. workpiece length Y: 990 mm Max. workpiece thickness: 60 mm Main spindle motor power: 4.5 kW Main spindle speed: 1,000 - 18,000 rpm Main spindle taper: ISO 30 Number of vertical drilling spindles: 20 Saw blade diameter of saw unit: 125 mm Number of tools in changer: 6 Extraction connection diameter: 100 + 100 mm Includes: - Complete tool set: Drill bit set for boring head 1 HW grooving saw blade 2 x DP grooving shank cutters Cedpfxsyrhcpe Af Aerd 1 HW-WP finish cutter 3 collet chucks with collets - New showroom machine -

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Csdpfezizkyex Af Aord Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: new, Year of construction: 2025, - Cutting Force : 1600 Tons Cedpjgv Acusfx Af Aord - Capacity : up tp 70 tons per hour - Side Compression Force : 2 x 220 Tons - Clemp Compression Force : 250 Tons - Electric Motor : 480 kW - Machine Weight : 150.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW An Inclined Shear is a heavy-duty machine used in metal recycling facilities to cut various types of scrap materials efficiently. Crodjgv Abpepfx Af Aod • Mixed and heavy-duty scrap can be processed (HMS 1 & 2, cars, pipes, etc. ) • No scrap length limit • No operator needed • Cut length adjustment options • Electric and Diesel options • Stationary and semi-mobile options • Hydraulic blade tightening system • The guillotine is made of casting • A remote diagnostic system is implemented • Automatic lubrication • Good output density • Heavy-duty structure • Chrome-plated & tampered shafts and sensitively honed cylinders • Special anti-wear plates • Reliable filtration system for the hydraulic oil • Reliable cooling system depending on the working climate • Top-brand hydraulic and electronic components The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Model: IS 1350 Cutting Force: 1.350 ton Hold Down Force: 250 ton Side Compression Force: 2x200 ton Cutting Width: 1.040 mm Number of Cuts: 2-3 cuts/min. Capacity up to 50 ton/h Weight: 128 ton Electrical Motor Power: 3x132 kW Chamber Dimensions: (W x L) 2,45 m x 8,5 m. General Dimensions: (W x L) 4,6 m x 11 m.

Year of construction: 2024, condition: new, - Cutting Force : 1100 Tons - Capacity : up tp 50 tons per hour - Side Compression Force : 2 x 120 Tons - Clemp Compression Force : 160 Tons Credpfx Asdfcpaef Ajd - Electric Motor : 264 kW - Machine Weight : 85.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: new, Year of construction: 2025, - Cutting Force : 700 Tons - Capacity : up tp 20 tons per hour - Side Compression Force : 2 x 85 Tons Crsdpfx Afsgv Aace Aed - Clemp Compression Force : 100 Tons - Electric Motor : 160 kW - Machine Weight : 55.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Condition: new, Year of construction: 2025, - Cutting Force : 900 Tons - Capacity : up tp 25 tons per hour - Side Compression Force : 2 x 120 Tons - Clemp Compression Force : 160 Tons - Electric Motor : 220 kW - Machine Weight : 78.000 kg - PLC Controlled - Remote Control Avaliable Crjdsgv Aa Iopfx Af Aed - Output Length Adjustable

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use. Crsdpfx Asxb Ucajf Asd

Year of construction: 1999, condition: ready for operation (used), X-axis: 3050mm, Y-axis: 2050mm, Z-axis: 120mm, wavelength: 9.3-11.5µm, laser power: 300W, laser class: 1, operating pressure: 2bar, control: Beckhoff TwinCAT, length: 5050mm, width: 2950mm, weight: 3.8t, with CO2 laser Rofin Sinar SCX 30 HP 16.6, year of manufacture: 2022. An on-site inspection is possible. Crodpsw U Uatofx Af Asd

Condition: as good as new (ex-display), Year of construction: 2021, The machining center PROJECT TF 600 S was developed for efficient cabinet (carcass) production. Technical Specifications: Axes: X-Axis: - Max. workpiece length: 2,800 mm - Min. workpiece length: 200 mm - Travel speed: 130 m/min Y-Axis: - Max. workpiece width: 1,200 mm - Min. workpiece width: 50 mm - Travel speed: 75 m/min Z-Axis: - Max. workpiece thickness: 60 mm - Min. workpiece thickness: 8 mm - Travel speed: 30 m/min Units for 6-sided machining: 1. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW 2. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW 3. Top grooving saw in X-direction: - Speed: 3,400 rpm - Max. saw blade diameter: 120 mm - Groove position: between 55 and 800 mm 4. Top routing unit: - For milling and grooving - Motor: 3.5 kW - Collet: ER 25 - Max. tool diameter: 16 mm 5. Bottom routing unit: - For milling and grooving - Motor: 3.5 kW - Collet: ER 25 Codsw Ugpyopfx Af Aord - Max. tool diameter: 16 mm 6. Bottom drilling head: - Vertical spindles in X-direction: 3 x 3 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm Control via Windows PC Software: MASTERWORK MACHINE VERSION Mobile control console with color screen, keyboard, and mouse Wireless barcode reader Additional features: - Intelligent, patented worktable: The worktable moves automatically up and down, as well as left and right for optimal support of all drilling and milling operations. Through-feed drilling and milling is also possible. - Controlled workpiece clamping device - Energy-efficient air flotation tables using an integrated fan (instead of external compressed air) - Rack and pinion drive on X and Y axes with linear guides - Ball screw drive on Z-axis with linear guides - CE safety features: light barriers and fencing, as well as 2 pressure stages for the clamping jaws - Automatic central lubrication system Further data: Dimensions: 5,280 x 2,480 x 2,190 mm (LxWxH) Extraction connections: 2 x 200 mm, 1 x 100 mm Required air pressure: 8 bar

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total length: 1,350 mm, total width: 1,260 mm, workpiece weight (max.): 300 kg, table width: 450 mm, overall weight: 2,300 kg, type of input current: three-phase, table length: 888 mm, drilling depth: 500 mm, Technical equipment Cjdsvppw Sopfx Af Ajrd -4-way guide changer -32-way electrode changer -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 1,460 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, total height: 2,850 mm, total length: 2,500 mm, total width: 2,400 mm, workpiece weight (max.): 6,000 kg, table width: 800 mm, overall weight: 6,000 kg, type of input current: three-phase, table length: 1,800 mm, drilling depth: 500 mm, Technical equipment -Automatic swivel head +-45 degrees -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining Crjdpfx Ajvppxpef Ajd -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort