Vertical machining center

MAS Kovosvit MCV 1270 Power

Condition: excellent (used), Year of construction: 2003, table length 900 mm table width 900 mm x-travel 457 mm y-travel 508 mm z-travel 406 mm control Brown & Sharpe Blodpox Szp Djfx Aiaep weight of the machine ca. 600 kg dimensions of the machine ca. 1300 x 1000 x 2400 mm

Condition: ready for operation (used), Year of construction: 2025, A relatively new double-girder overhead crane Konecranes is available. Load capacity: 12t. Documentation available. An on-site inspection is possible. Bedpfx Aiey Anuhjaelp

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Bledpfov A Uw Djx Aiaop Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: used, Year of construction: 2023, surface area 1168 x 508 mm max. table load 1800 kg travel -x axis 1016 mm travel -y axis 508 mm travel -z axis 508 mm spindle taper SK40 spindle speed 10000 U/min spindle capacity 15 kW spindle torque max. 99 Nm rapid traverse y/x/z axis 28 m/min control HURCO MAX5 total power requirement 20 kW weight of the machine ca. 4,15 t dimensions of the machine ca. 3,7 x 3,3 x 2,5 m The machine is like new !!!, only 61 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 360 mm - Max. tool weight: 7 kg Blsdeza Hqnopfx Aiaep Accessories: documentation

Condition: excellent (used), Year of construction: 2011, Technical data: Two-column design Cutting capacity: 700 x 520 mm Cutting diameter (round steel): max. 520 mm Cutting diameter (square steel): max. 520 x 520 mm Cutting diameter (rectangular steel): max. 520 x 520 mm CNC control: B&R PP 45 Hydraulic bundle clamping Bledpfsxlcpvjx Aiaep Hydraulic lowering Infinitely variable saw band speed Mobile control panel with digital display Saw blade dimensions: 6640 x 41 x 1.3 mm Cutting speed: 15 - 90 m/min Working height: 770 mm Motor power: 5.5 kW Dimensions (L x W x H): approx. 3500 x 3000 x 2500 mm Weight: approx. 5.0 t Accessories: 4 new saw blades Condition: Almost as-new condition The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, torque: 90 Nm, controller manufacturer: Siemens, controller model: 840D PL, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 25 bar, number of spindles: 1, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are Chiron experts. The machine is currently being partially overhauled and is in very good condition. If a probe or another option is needed, we can gladly provide it for an additional charge. FZ15W with 4th and 5th axis Machine dimensions: approx. 4200mm x 2400mm Travel range Bljdjwpcfujpfx Aiaop -X = 730mm -Y = 400mm -Z = 425mm Control: 840D Powerline Main spindle: -Speed: 12,000 rpm -Tool holder: SK40 -Torque: max. 90NM Tool changer -Tool places: 20 Workpiece changer -Peiseler table with Afrocontroller Chip conveyor Coolant system with internal and external cooling Hydraulic clamping device Complete documentation available Geometry tip-top HS runout 0.008mm QC20 measurement 12.6µm (Manufacturer's tolerance 18µm, new machine 23µm, used machine) The machine can be inspected under power.

Condition: good (used), Year of construction: 2022, functionality: fully functional, Hermle C 32 U with HS flex handling system, Year of manufacture 2022, Heidenhain iTNC 640 control system, Travel range X/Y/Z 650/650/500 mm, Dynamic Efficiency, Monitoring software, Spindle speed up to 25,000 rpm, HSK - A63 tool interface, 36-position tool changer, Additional magazine with 88 positions, 2-axis swiveling rotary table 650 HS flex, Torque drive for the C-axis, Spur gear tandem drive for the A-axis, HS flex handling system, Bledpfx Ais Aggfmeajp HS flex additional magazine, HACS pallet and order management system, Chip conveyor, Emulsion extraction system, IKZ 80 bar, Combination protective screens, Electric handwheel, Heidenhain 3D measuring probe.

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Travel ranges: X: 1200mm Y: 600mm Z: 500mm Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Bjdjzkbr Tepfx Aiaolp Electric handwheel Tool measurement 3D probe IKZ 70 bar Weight: 15 tons Accessories: 20 tool holders HSK-A63 2 vices Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.

Year of construction: 1998, condition: ready for operation (used), Base machine CTX 200E with driven tools, C-axis and 1x back working. Includes DATAPILOT software package TurnPlus, cooling unit for control cabinet, hinge belt chip conveyor, discharge height: 1100mm including coolant tank, tool holder set for universal disc turret with tool holders for external machining, boring bar holders, tools with cylindrical shank holders, sealing plugs, reducing sleeves. Bar gripper, axial complete, workpiece pick-up device, tool spindles 3x axial for drilling/milling/tapping, 1x radial for drilling/milling/tapping, 1x for saw blades, collet chuck complete for main spindle, collet chuck complete for counter spindle, 17x DIN collets 173E round Ø 3-40mm, 2x DIN collets 173E, hex SW 7 and 12mm, 2x DIN collets 173E, square SW 8mm. Bar loading magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar loading magazine IEMCA BOSS 542/32, Ø 8-41mm. With complete documentation. The machine has been idle for one year as the turret head is missing, no further defects known, operating hours unknown, without maintenance records. With bar loader and numerous tools. Blodow Tl Ifjpfx Aiasp

Condition: ready for operation (used), Year of construction: 2005, A machining center is available. Travel X/Y/Z: 550mm/400mm/425mm, A-axis: +/-100°, rapid traverse: 40m/min, speed: 10500rpm, tool positions: 20, tool holder: SK40, table load: 300kg, control: Siemens Sinumerik. The screen of the machine is defective. Documentation available. On-site inspection is possible. Bljdpfx Aowxfa Hsiasp