Used Mass Spectrometer for sale (733)

Condition: good (used), Waters Type: Synapt G2-Si SYNAPT G2-Si mass spectrometry (TOF with ion mobility) New discovery opportunities for your lab Data, data processing. Powerful. SYNAPT enables the detailed characterization of complex mixtures and molecules with uncompromising qualitative and qualitative performance, optimized workflows and a platform of unparalleled versatility. Ultimate UPLC/MS/MS performance Powerful data-independent and data-dependent solutions CID and ETD fragmentation Wide range of experimental options Upgrade to three separation dimensions! Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Hsdevitlmepfx Akrjl We will be happy to answer any further questions you may have on the phone.

Condition: used, HPLC Waters The system consists of these modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow control modules Flow rate from 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates from 0.10 to 5.00 µl/min. Flow control module Flow rate from 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples it takes from microplates or vials into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard rinse, or it can do so in less than 60 seconds, including a double standard flush. The sample manager accepts standard impression plates, 5.03 $0.02 in. x 3.365 $0.02 in, SBS/ANSI compliant plates (maximum height of 2.2 inches, including covers). The sample manager can test samples at any temperature between 4 and 40 °C (39 and 104 °F) at ambient conditions of 25 °C (77 °F) or less. Heating and trapping module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient to 65 °C (149 °F). The column base can be swiveled outwards to any position between 0° and 180°. In the 0° "Home" position, the column base is located directly above the sample manager Hjdpfxsvcnpaj Akrsl and can be connected to an optional optical detector. In the 180° "away" position, the analytical column can be connected to a mass spectrometer (on the right-hand side of the system). The Synapt G2 is a Q-TOF based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used as a peptide identification only (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Instruction manual Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, functionality: fully functional, Agilent 6510 System + PC & Software. The set includes: -Agilent 6510 Q-TOF LC/MS -Agilent 1260 Infinity G1376A Capillary Pump Hodpfx Ajt T T Tnekrol -Agilent 1200 Series G1377A Micro Well Plate Autosampler -Agilent 1200 Series G1379B Micro Vacuum HPLC Degasser -PC & Software The Agilent 6510 Quadrupole Time-of-Flight LC/MS delivers unsurpassed Q-TOF sensitivity in a compact, bench-top design. With the 6510’s tenfold sensitivity advantage, you detect critical, low-level components that are out of reach of other Q-TOF instruments. At the same time, fast data acquisition means you can acquire one MS and five MS/MS spectra per second, for higher-quality data and more structural information from complex samples. And ultralow-ppm mass accuracy maximizes confidence in your results. Features: -Attomole-level sensitivity – Sensitivity unequaled by any Q-TOF on the market today enables the 6510 to detect more low-abundance components. -Better than 3-ppm mass accuracy – Outstanding mass accuracy, typically 1-2 ppm, rivals FTMS instruments and increases specificity and confidence in results. -Wide in-spectrum dynamic range – 3-4 orders of magnitude in-spectrum dynamic range enables identification of less-abundant compounds in the presence of more-abundant compounds and makes overall operation easier. -Fast MS and MS/MS acquisition – Fast spectral acquisition improves the identification of unresolved components in complex samples and makes the 6510 compatible with the latest fast chromatography. -Multiple ion source options- The best selection of ion sources in the LC/MS industry-including the revolutionary HPLC-Chip/MS and multimode ESI/APCI sources-allow the 6510 Q-TOF to address a wide range of LC/MS applications Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Agilent 6210 G3258A, G1969A Time of Flight Liquid Chromatograph Mass Spectrometer LC/MSD TOF. The Agilent TOF is an orthogonal-axis time-of-flight mass spectrometer (oa-TOF). That is, the ions reaching the time-of-flight chamber are impelled in a direction perpendicular to their original path. You can set up an Agilent time-of-flight mass spectrometer system (TOF) in several configurations: -For normal flow LC/MS with a binary pump, quaternary pump, well-plate sampler (or autosampler) and ESI , APCI, APPI or MMI ion sources -For microflow LC/MS with a capillary pump, micro well-plate sampler and ESI, APCI or MMI ion source -For nanoflow LC/MS with a nanopump, micro well-plate sampler and nanospray source or dual nanospray source -TOF system with an AP-MALDI source Each system has advantages for drug discovery — high throughput sample screening with highly sensitive detection and accurate mass assignment. Features: Hsdpfx Ajt Ui N Uekrsl ESI – Electrospray Ionization APCI – Atmospheric Pressure Chemical Ionization APPI – Atmospheric Pressure Photo Ionization MALDI – Matrix-Assisted Laser Desorption Ionization MMI – Multimode Ionization Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Agilent G1956A LC/MSD VL + PC & software mass spectrometer. The Agilent G1956 LC/MSD Mass Spectroscopy Instrument is a highly reliable, laboratory-grade mass selective detector. The Agilent 1100 Series includes variable,multiwavelength, diode-array and mass selective detectors in addition refractive index and fluorescence detectors. The fluorescence detector, which has an innovative optical design, provides: • Simultaneous quantitative and qualitative information from up to four signals in a single run, saving time • Real-time spectra (similar to diodearray detection) for fast method optimization and peak identification. Hsdpfst Uk I Ejx Akrsl The mass selective detectors offer: • complete mass spectral information from the single-quadrupole LC/MSD and complete MS/MS data from the ion trap LC/MSD Trap • excellent sensitivity, reproducibility and ruggedness thanks to a patented orthogonal-spray ion source and highcapacity drying gas system. Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Agilent/HP 1100 Series MSD + PC & software. HP first benchtop quadrupole LC/MS the 1100 Series LC/MSD. The 1100 Series LC/MSD provides information quickly in one chromatographic run. It provides molecular weight structural information and has excellent selectivity needed to identify compounds check the purity of chromatographic peaks and quantitate trace level samples in complex matrices in a rugged reliable easy-to-use benchtop system. For chromatographers and mass spectrometrists who need the utmost in sensitivity the LC/MSD SL makes analyses in the very low picogram range possible. Hodpjt Ui E Nefx Akrol The 1100 Series LC/MSD offers many advantages as an LC detector. It offers the dynamic range and repeatability needed for most quantitative applications. In the SIM mode it offers high sensitivity. For compounds lacking a strong chromophore it offers detection limits not possible with other detectors. By offering unit mass resolution to m/z 3000 the LC/MSD allows for characterization of large proteins beyond 60000 KDalton. Having extended mass range to 3000 is also beneficial when studying modified proteins such as glycoproteins where their charge distribution falls above m/z 2000. Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Agilent 6520 System + PC & Software. The set includes: -Agilent 6520 Accurate-Mass Q-TOF LC/MS -Agilent 1260 Infinity HPLC G1379B Micro Vacuum Degasser -Agilent 1200 Series G2226A Nano pump -Agilent G4240A HPLC-Chip Cube Interface - PC & Software The Agilent G6520 LCMS QTOF MS System is a high-performance mass spectrometry system designed for accurate and reliable analysis of complex samples. It features advanced ion optics, high-resolution mass spectrometry, and fast data acquisition rates, making it ideal for a wide range of applications in pharmaceuticals, biotechnology, and environmental analysis. With its intuitive software and user-friendly interface, the 6520 Q-TOF LC/MS MS System provides researchers with the tools they need to quickly and easily identify and quantify compounds in even the most challenging samples. Hodpot T Ub Hofx Akrel The Agilent 6520 Q-TOF has industry-leading performance in the most important categories: attomole sensitivity, better than 2-ppm MS mass accuracy, better than 5-ppm MS/MS mass accuracy, mass resolution to 20,000, and broad mass range from 25 to 20,000 m/z. This is an ideal choice for top-down and bottom-up proteomics, metabolomics, and HRMS applications. Good working condition. Please check out our other listings as well.

Condition: good (used), functionality: unexamined, Year of construction: 2014, Used BioMérieux VITEK MS 410895 Mass Spectrometer for sale! We have 3 similar units available; in case of buying multiple at once, we can provide discounts. Worldwide shipping available – please contact us for a quote. Hjdpsxcwaqefx Akrol If you're in need of vacuum pumps, accessories, or any vacuum-related equipment, don’t hesitate to reach out. We’re happy to assist with sourcing, technical advice, or custom solutions.

Condition: used, functionality: unexamined, machine/vehicle number: TSH 065 D, Used Pfeiffer TSH 065D with Mass Spectrometer. Complete set! Turbo pump: Pfeiffer TSH 065 D (Controller Pfeiffer TCP 015) Diaphragm pump: Vacuubrand MZ 2 NT Mass Spectrometer: Balzers QME 064 + Partial Pressure Gauge Printer: Philips PM8222 recorder Hedpfx Akow H Np Ijrel Complete with many vacuum components.

Condition: used, This listing is for the This listing is for the Bruker microflex mass spectrometer The unit is in full working condition and is ready for immediate use The Bruker Microflex is a Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometer (MALDI-TOF MS), primarily used for rapid identification of microorganisms, biomolecules (like proteins and peptides), and polymers. It is part of Bruker’s MALDI Biotyper series Key Components: Laser Source: Nitrogen or solid-state laser (commonly 337 nm UV) Ion Source: Vacuum chamber with MALDI target plate Flight Tube: Measures time-of-flight of ions Detector: Converts ion arrival times into a mass spectrum MALDI Target Plate: Metal plate for spotting samples mixed with matrix How It Works (Simplified): Sample Prep: Mix analyte with a MALDI matrix (e.g., α-cyano-4-hydroxycinnamic acid). Laser Ionization: Laser hits the matrix, causing it to ionize the sample. Ion Acceleration: Ions accelerated into TOF analyzer. Detection: Time-of-flight is measured; smaller ions reach the detector faster. Hjdpfx Akjxhdxqjrjl Spectrum: Mass/charge ratio (m/z) plotted vs intensity. Physical Specs (Approximate): Footprint: Desktop size (about 80 cm width) Weight: ~100–120 kg (varies by model/version) Power: Standard lab electrical supply Environment: Requires clean, stable temp/humidity condition

Condition: new, Year of construction: 2024, conveyor belt length: 2,000 mm, conveyor belt width: 350 mm, conveyor belt speed: 33 mm/s, total length: 2,050 mm, total width: 450 mm, total height: 500 mm, overall weight: 50 kg, discharge height: 500 mm, Equipment: documentation/manual, emergency stop, type plate available, NP 2000 - U 350 O 76 mod.NP (BLADE SEPARATOR) STANDARD FRAME Profile type: STANDARD FRAME Drive roller diameter: 76 STANDARD Bottom flat part length: 2000 mm Usable width: 350 (actual width 345 mm) Loading height external: 300–500 mm Belt type: BLACK PVC ROUGH FINISH BELT Hsdpoyym Izefx Akrol LATERAL MOTOR Motor: 0.18 kW 4P B14 400V THREE-PHASE 50 Hz 400V THREE-PHASE / RIGHT SIDE Gearbox: RMI40P 1/100 63 B14 (3.3 m/min) Load hopper: 700 x 550 x H. 200 mm GALVANIZED STEEL SUPPORT Support type: WHEELS Control unit: START/STOP switch Control: ON/OFF + emergency button 400V THREE-PHASE 50 Hz on left side

Condition: new, Year of construction: 2026, NDS 2 • Aluminum profile construction • Adjustable angle/tilt Hsdjwktn Ajpfx Akrel • Length of inclined part: 1300 mm • Usable width: 350 mm • Loading length: 600 mm • Separating length: 800 mm • Minimum height (H min): 600 mm • Maximum height (H max): 1000 mm • Separator with blades included

Condition: new, Year of construction: 2026, MIXER Mod. MV2 • Steel construction, painted exterior (RAL 9006) • Capacity: 120 kg / 200 liters • Square frame: 700 x 700 mm • Adjustable height: from 1085 mm to 1385 mm (from the floor to the loading point) • Programmable control unit with emergency stop button Hodpfx Akowktm Ejrsl (The customer can choose between manual mode - continuous operation - and automatic mode - with adjustable operating time and pause) • Geared motor: 0.5 HP / 0.37 kW, 220/380V, 50 Hz • Upper lifting door with hinges for loading material with safety microswitch • Lower lifting door for discharging material with safety microswitch • Side openings for connecting a suction hose • Mixer frame on adjustable telescopic legs with swivel wheels with brake

Condition: new, functionality: fully functional, New device MASS International Z-Conveyor Belt NDZ Angled Conveyor / Conveyor Belt Available at short notice Example as shown: Height-adjustable angled conveyor belt with adjustable angles NDZ1 Infeed section 600 mm Incline section 1300 mm Discharge section 500 mm Usable width 250 mm External width 305 mm (without motor) Hsdsiz S Htopfx Akrel Height-adjustable discharge height 700 - 1000 mm Adjustable angles for infeed and discharge section Adjustable inclination PU belt Color: black L cleats Cleat spacing 500 mm Cleat height 30 mm Belt speed 3 m/min Standard control with emergency stop / stop button Mobile on swivel locking castors Three-piece chute sheets for infeed section The stated offer price refers to the NDZ1.

Year of construction: 2009, condition: excellent (used), MASS NC steep conveyor, angle conveyor Angle conveyor belt with substructure Conveyor belt length: 1,500mm flat + 1500mm rising. Dropping height: approx. 1400mmmm. Description: available immediately, Ready to ship more pieces Belt speed: 7m/min T 30 studs Welded stud height 30 mm Drive: 0.37 kw 380V 50Hz Height-adjustable angle conveyor belt with adjustable angles Feed part 1500 mm Riser section 1500 mm Usable width 850 mm Stud height 30 mm Belt speed: 7m/min Standard control with emergency stop/stop button Hedpfx Akspby Urjrol External width 950 mm (without motor) PU strap color green L studs Stud spacing approx. 450 mm Stud height 30 mm Standard control with emergency stop/stop button mobile on steerable stop rollers Lateral collecting plates in the feed section

Condition: new, New machine MASS International Model NS1 Angle conveyor / L-shaped conveyor / Conveyor belt Available at short notice Adjustable angle conveyor NS1 with catch plates in the feed section Hodpfx Akeuip Ilorsl Example as shown: Feed section: 600 mm Rising section: 1300 mm Usable width: 250 mm External width: 305 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angle between feed and rising sections Variable inclination adjustment Cleat height: 30 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on steerable locking castors Three-piece hopper plates for feed section The quoted price refers to the NS1. Other angle conveyors in different sizes available to order—see list, image 2. Custom dimensions available upon request.

Condition: new, New machine MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Hjdpfou Ti Tvjx Akrsl Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: ready for operation (used), Conveyor Belt, Conveyor System, 5m, Used Machine Manufacturer: Mass International Hjdpfx Akjv Dgrversl Model: NP / 042/71 Overall Dimensions: 5050 x 430 x 930 mm Belt Size: 4750 x 200 mm Belt Speed: 3.7 m/min The conveyor is equipped with 3 fans, making the system ventilated/coolable. Electrical Specifications: 400 V

Condition: ready for operation (used), Conveyor Belt, Conveyor System, 6m, Used Machine Manufacturer: Mass International Model: NP / 042/2 Overall Dimensions: 6000 x 480 x 1000 mm Belt Size: 5675 x 200 mm Belt Speed: 3.7 m/min The conveyor is equipped with 3 fans, making the system ventilated/coolable. Hedpevvlkhsfx Akrol Electrical Specifications: 400 V

Condition: ready for operation (used), Conveyor Belt, Transport Belt, Running Belt 6m, Used Machine Manufacturer: Mass International Hsdpfev Dgndjx Akrel Model: NP / 04270 Overall Dimensions: 6000 x 420 x 930 mm Belt Size: 5675 x 200 mm Belt Speed: 3.7 m/min The belt has 3 fans, and the track can be ventilated/cooled. Electrical Specifications: 400V

Condition: new, New device MASS International Angle Conveyor Belt NDS L Conveyor belt/assembly line Available at short notice Angle conveyor belt with adjustable angles Incl. paddle separator and side catch plates at the feed section Example as shown: Feed section: 600 mm Upright section: 1300 mm Discharge section: 800 mm Hodpfx Akor A D S Eersl Usable width: 350 mm Outer width: 405 mm (without motor) Height-adjustable, discharge height 700 - 1000 mm Adjustable angles for feed and discharge sections Adjustable inclination PU belt, super grip Belt speed: 3 m/min Mobile on swivel lockable castors Side catch plates at the feed section Paddle separator is individually controllable and height-adjustable

Condition: new, New equipment MASS International Hjdpsizi S Dsfx Akrel Discharge Conveyor NPS Conveyor belt / Discharge belt Available at short notice Discharge surface without side wall Height-adjustable, mobile on swiveling stop rollers Example: NPS 1 Length 1500 mm Usable width 250 mm External width 250 mm (without motor) Discharge surface without side wall, thus full usable width Height-adjustable discharge height 200 - 400 mm PU belt, smooth, black Belt speed 3 m/min Conveyor belt mobile on swiveling stop rollers The quoted price refers to the NPS1. Optional: Dimensions on customer request Belt suitable for food use (FDA-compliant) Modified belt speed Frequency converter for stepless belt speed adjustment etc.

Condition: new, New equipment MASS International NS3 Speciale Angled conveyor belt with separator Available at short notice Example as pictured: L-shaped conveyor with double roller separator Infeed section: 600 mm Inclined section: 1300 mm Usable width: 450 mm Outer width: 505 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angles both in the infeed section and incline Black PU belt with cleats Cleat height: 20 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on steerable braked castors Side collection plates in the infeed section Optionally also available as angled conveyor with Supergrip belt and separator (see last two photos) Double roller separator with covered belt drive fitted with Super Grip Adjustable discharge chute Hsdsd Tidxjpfx Akrjl

Condition: new, New device MASS International Conveyor belt NI 1 Conveyor belt/unloading conveyor Angle-adjustable conveyor belt with hopper in the feed section available at short notice Example: NI 1 Length 1500 mm Effective width 250 mm Outer width 305 mm (without motor) Height-adjustable dispensing height 600 - 1000 mm Hodpfx Aoh Nyp Uokrel Variable inclination adjustment Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m /min mobile on steerable stop rollers Optional: Dimensions on customer request FDA compliant belt Modified belt speed etc.

Condition: new, New device MASS International Angle Conveyor / Belt Conveyor L-shaped conveyor belt with fixed 35° angle Available at short notice MASS International Angle Conveyor NC1 Conveyor belt with fixed angle and collecting plates in the infeed section Example as illustrated: NC 1 Infeed section 600 mm Inclined section 1300 mm Usable width 250 mm External width 305 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Fixed angle between infeed and inclined section Inclination variably adjustable Cleat height 30 mm Cleat spacing 500 mm Hsdjhm Axgspfx Akrel Belt speed 3 m/min Mobile on swivel castors with brakes Optional: Dimensions to customer specification FDA-compliant belt Modified belt speed etc.