Used press brakes with 0-49t bending force for sale (102)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, The machine can be inspected under power until 04/05/2026! TRUMPF TruBend 5170 including BendMaster! The machine has been regularly serviced and maintained exclusively by Trumpf with a complete service history. The hydraulic cylinders are leak-free and show no oil loss. All robot tooling shown in the pictures is included. TECHNICAL DETAILS Stroke: 500 mm Pressing force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, upper and lower Gedpoy Hqc Nefx Anxsit Number of axes: 6 Payload: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected load: 28.0 kVA Control voltage: 24 V DC Overrun time: max. 90 ms Overrun distance at 220 mm/s: max. 10 mm Overrun distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg EQUIPMENT CE marking Documentation/manual Back gauge with sensor technology CNC crowning CNC tool displacement BendMaster (robot on 8 m rail) Vacuum manipulators CNC regripping station Double sheet detection Safety device BendGuard Lasersafe Spare parts: cable drag chain, spare vacuum suction pads, BWF machine mounts (machine feet)

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 441, functionality: fully functional, pressing force: 28 t, throat depth: 220 mm, overall weight: 3,600 kg, working width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Pressing force: 28 t Max. working width: 1,000 mm Column gap: 950 mm Throat depth: 220 mm Back gauge depth: 415 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,150 x 2,400 mm Weight: 3,600 kg Giodoy Rxy Dspfx Anxot Transport packages: 1 Power: 3.0 kW EQUIPMENT CE marking Documentation

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, TECHNICAL DETAILS Pressing force: 28 t Bending length: 835 mm Back gauge travel range: 0 - 370 mm Stroke: 200 mm Distance between frames: 890 mm Support tables: 200 x 275 mm Throat depth: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Pressing stroke: 8-10 mm/s Return: max. 35 mm/s Positioning accuracy: +/- 0.05 mm Gedjy Rry Djpfx Anxsit MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual

Condition: used, Year of construction: 1990, pressure 25 t chamfer lenght 1250 mm distance between columns 970 mm Gijdsy Ruw Eopfx Anxot Stroke beam 100 mm max. opening beam/table 270 mm C-recess 150 mm max travel X-axes 420 mm R1 and R2 axis controlled by cnc 100 mm Z1+Z2 axes controlled by cnc manuell mm Quick speed,inspeed 100 mm/sec bendingspeed 10 mm/sec opening speed 100 mm/sec length 1500 mm width 1000 mm height 2000 mm weight 1200 kg total power requirement 4 kW dimensions of the machine ca. 1,5x1,0x2 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 549 h, pressing force: 41 t, stroke length: 200 mm, total width: 1,584 mm, total height: 2,449 mm, overall weight: 4,000 kg, travel distance X-axis: 300 mm, travel distance Z-axis: 955 mm, product length (max.): 1,520 mm, number of axes: 6, This 6-axis Bystronic Xpert 40/1030 hydraulic press brake was manufactured in 2016. It features a pressing force of 400 kN and a bending length of 1030 mm, ensuring efficient performance. The machine includes a maximum stroke of 200 mm and an advanced ByVision Bending control system with a 22-inch Full HD touch display. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 40/1030 machine we have for sale. Contact us for further details. • Number of axes: 6-axis backgauge (Y1, Y2, X, R, Z1, Z2) • R-axis travel: 100 mm • Y-approach speed: 300 mm/s • Y-working speed: 25 mm/s • Open height: 515 mm • Distance between side frames: 1060 mm • Table width: 60 mm • Total connected load: 12 kW • Operating voltage: 400 VAC (3 phase, 50 Hz) • Control voltage: 24 VDC • Nominal current fuse: 32 A • Max. hydraulic pressure: 320 bar • Control system: ByVision Bending with 22-inch Full HD touch display • Stroke: 200 mm • Throat: 0 mm • Press force: 400 KN • Bending length: 1030 mm • Working height: 885 mm Gjdpfx Aoyycbqsnxsit • Lower beam width: 120 mm • Crowning: hydr. • Y rapid approach speed: 250 mm/s • Y return speed: 250 mm/s • Main motor power: 7.5 kW • Oil capacity: approx. 100 l • Backgauge: Type P14HA3-HA6 • X-axis travel: 300 mm • Max. backgauge range in X: 500 mm • X-axis accuracy: 0.02 mm • X-axis speed: 1500 mm/s • R-axis travel: 100 mm • R-axis accuracy: 0.1 mm • R-axis speed: 500 mm/s • Z-axis travel: approx. 955 mm • Z-axis accuracy: 0.1 mm • Z-axis speed: 2000 mm/s • X1-axis travel: 0 mm • X1-axis accuracy: 0 mm • X1-axis speed: 0 mm/s • Length (L): 1520 mm • Width (W): 1700 mm • Height (H): 2449 mm • Side frame below floor: 0 mm • Lower beam below floor: 0 mm • Weight: approx. 4 t Additional equipment • Integrated tool storage cabinets • Multiple sets of bending tools (punches/dies) • Ergonomic foot switch • XPT Clamping Technical Specification Bending Length 1030 mm

Condition: good (used), Year of construction: 2010, functionality: fully functional, 2-axis: Programmable X, R axis Bending length: 2100 mm Max. force: 40 t Max. opening between beams: 615 mm Max. stroke: 200 mm Giodeya Dggspfx Anxet Approach speed: 140 mm/s Working speed: 0 – 10 mm/s Stroke speed: 140 mm/s Dwell: 6 mm Dimensions (LxWxH): 2900 x 1900 x 3050 mm Weight: approx. 5200 kg The machine can be inspected under power at any time.

Condition: new, Year of construction: 2024, chamfer lenght 0900 mm distance between columns 900 mm pressure 20 t column arm 230 mm stroke length max. 150 mm travel -x axis 350 mm Gedjwp Ti Repfx Anxeit

Condition: new, Year of construction: 2024, chamfer lenght 0900 mm distance between columns 900 mm pressure 20 t column arm 230 mm stroke length max. 150 mm Gjdpfowp Th Hox Anxoit travel -x axis 350 mm

Condition: excellent (used), Year of construction: 2014, operating speed: 8 mm/s, reverse speed: 100 mm/s, total length: 2,470 mm, total width: 2,000 mm, total height: 2,100 mm, overall weight: 3,800 kg, controller manufacturer: CYBELEC CNC, working width: 2,100 mm, bending force (max.): 40 t, distance between stands: 1,650 mm, control type: CNC control, number of axes: 4, actuation type: hydraulic, Press brake TOSKAR - TA 2100-40 MACH-ID 9474 Make: TOSKAR Type: TA 2100-40 Control: CYBELEC CNC Year: 2014 Cybelec 2D Controll system 4 Axis controlled Y1 / y2 / X / Delta-R Giodoyw Ip Ijpfx Anxet 1 set universal tooling Fiessler laser safe  Sheet support arms front side Max. bending length: 2100mm Distance between column: 1650mm Max. pressing force: 40T Beam stroke: 130mm Table Width: 100mm Troth beam: 300mm Approch speed: 100mm/min. Working speed: 8mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1009mm Number of controlled axis: 4 Power: 5.5kW Length: 2470mm Width: 2000mm Height: 2100mm Weight: 3800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, Equipment: CE marking, FOR SALE: Coastone Cone 500 – Compact High-Precision Finnish Press Brake Are you looking for a compact yet powerful press brake for precision work? On offer is the Coastone Cone 500, an ultra-compact servo-electric press brake manufactured in Finland. This machine is renowned for its rapid operation, high accuracy, and quiet performance, making it an ideal choice for small parts production and confined workspaces. Technical Specifications: Model: Coastone Cone 500 Manufacturer: Coastone Oy, Nurmo, Finland Year of Manufacture: 2005 Bending Force: 180 kN (18 Tons) Machine Weight: 1500 kg Gisdpfx Aney Rvhrjxet Voltage: 400 VAC / 16 A Power: 4.4 kW Frequency: 50 Hz Key Advantages: Exceptional Precision: The servo-electric drive guarantees micron-level repeatability with every bend. Space-Saving: Weighing just 1500 kg and featuring a slim footprint, it fits easily into nearly any workshop environment. Energy Efficient: Power is consumed only while the machine is moving—no continuous, noisy, or energy-wasting hydraulic pumps. Premium Finnish Quality: Trusted local engineering ensures a rigid machine frame and straightforward access to service and spare parts. An outstanding solution for workshops seeking to optimize small part production without compromising valuable floor space.

Condition: good (used), Year of construction: 2004, functionality: fully functional, FOR SALE: Coastone Cone 900 – High-Precision Finnish Press Brake For sale is a high-precision and energy-efficient Coastone Cone 900 press brake. This Finnish-made machine is specifically designed for fast and accurate bending of small to medium-sized parts. Its servo-electric operation makes it quiet, eco-friendly, and low-maintenance. Technical Specifications: Gjdpfsy Rvhljx Anxsit Model: Coastone Cone 900 Manufacturer: Coastone Oy, Nurmo, Finland Year of Manufacture: 2004 Bending Force: 180 kN (18 Tons) Machine Weight: 1800 kg Voltage: 400 VAC / 16 A Power: 4.4 kW Frequency: 50 Hz Key Benefits: Finnish Quality: Built in Finland, ensuring a rigid structure and reliable long-term performance. Accuracy: Servo-electric technology provides extreme precision and exceptional repeatability. Energy Efficient: Power is only consumed during the bending cycle, significantly reducing energy costs compared to hydraulic alternatives. Compact Footprint: With a weight of 1800 kg, it is easy to place in various workshop layouts. An excellent choice for precision sheet metal work requiring fast cycles and high accuracy.

Condition: ready for operation (used), Year of construction: 2002, pressing force: 14 t, number of axes: 2, Press brake manufactured in 2002. This HACO PPM 30135 b features a pressing force of 135 tons and a bending length of 3100 mm. It is equipped with a power of 15 kW, ensuring efficient operation. If you are looking to get high-quality bending capabilities, consider the HACO PPM 30135 b machine we have for sale. Contact us for further details. • Power: 15 kW • Voltage: 380 V Gedpoy Nc D Dofx Anxeit • Serial number: 90 695 • Control: Conventional CNC/NC press brake • Condition: In working condition Technical Specification Bending Length 3100 mm

Condition: ready for operation (used), Year of construction: 2022, This Metallkraft GBP 31175 press brake was manufactured in 2022. It features a CNC-controlled DELEM DA-58T controller for precise bending sequence calculations and programming. The machine boasts a pressing force of 175 tons and a bending speed of 10 mm/s, with a motor power of 18.5 kW. It includes Italian-made tooling and Fiessler safety lasers for enhanced operation safety. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Pressing force: 175 tons / motor power: 185 kw / 400 v / bending speed: 10 mm/s / oil tank capacity: 200 liters • Cnc control: delem da-58t 2d graphic touch screen controller / controlled axes: y1, y2, x, and r axes with motor drive / motorized table preload for consistent bending angles Gisdpex D Rphsfx Anxot • Frame: stress-relieved, massive, welded steel frame / upper beam guidance: massive four-fold guidance for optimal support • Tool clamping: manual upper tool clamping with promecam/amada system / tool set: includes "deerfoot" stamp and quadruple-opening lower tools for materials 1 mm to 8 mm thick • Safety system: fiessler safety lasers and plcs / lighting: energy-saving led in work area and rear / foot pedal: mobile foot control unit / front plate support arms: adjustable on linear guides for easier material handling

Condition: good (used), Year of construction: 2014, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1100 mm stroke of upper beam 100 mm throat 195 mm working feed 10.0 mm/sec return speed 70.0 mm/sec 180 bar work height max. 840 mm table width 110 mm dayligth 295 mm Control ATS 585 total power requirement 5.5 kW weight 2500 kg range L-W-H 2100 x 1200 x 1800 mm Furnishing: - NC controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control ATS 560 * Positioning of the backgauge (X axis) * Depth setting positioning (Y1+Y2 axis) * Possibility of programming different programs * Storage capacity max. 200 programs - max. 400 sentences * Pivoting control panel, left front - electric back gauge (X axis) * with 2 stop fingers, manually adjustable (R+Z axis) - System A tool holder - with cambered upper wedge - Split insert/bending tools - side protection grids Gjdpfx Aey Nd Tyjnxoit - rear protection - free-moving double foot switch - Operation manual

Condition: good (used), Year of construction: 2011, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Distance between uprights: 932 mm Throat depth: 150 mm Stroke: 120 mm Usable installation height: 295 mm Giedpfx Ajy Igbdenxst Y-axis working speed: 10/25 mm/sec Y-axis rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805x1330x2380 mm Accessories: - Light barrier - Foot switch - Side safety doors - Wila tool clamp - Trumpf TASC 6000 control - 6-axis backgauge

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Press force: 36 t Godpfx Anoyz Rwioxsit Bending length: 1020 mm Clearance between frames: 932 mm Throat depth: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-working speed: 10/25 mm/sec Y-rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805x1330x2380 mm Operating hours: 3,297 h

Condition: new, neu ca. 12 - 14 Wochen ab Auf Slowakei 28300 € 540.53 € 40 to 2000 mm X und Y Achse 100 mm 310 mm hydraulisch 38 l 6 kW Giedpfx Aneynm A Texot 2500 mm 1200 mm 1900 mm 2100 kg 420 mm 1 10 mm/s 12 mm/s 40 mm/s 0.02 +/- mm 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German

Condition: ready for operation (used), Year of construction: 2005, operating hours: 13,242 h, total width: 1,900 mm, total height: 2,500 mm, overall weight: 10,500 kg, product length (max.): 3,500 mm, number of axes: 2, Press brake manufactured in 2005. This Baykal APH 3110x200 features a bending length of 3100 mm and a capacity of 200 tons. It is equipped with a main motor of 15 kW and has a maximum stroke of 250 mm. If you are looking to get high-quality bending capabilities, consider the Baykal APH 3110x200 machine we have for sale. Contact us for further details. • Capacity: 200 ton • Main voltage: 400/50/3 V/Hz/Ph • Motor power: 15 kW • System pressure: 270 bar • Min. stroke: 150 mm • Max. stroke: 250 mm • Working hours: 13,240 h • Status: Under power • Condition: Good working condition Additional equipment Gisdpfey Hlvqox Anxjt • Top tool (45 kg) • Bottom tool (275 kg) Technical Specification Bending Length 3100 mm

Condition: used, Year of construction: 2019, BYSTRONIC - XPERT 40/1030 - 2019 - open height: 515 mm - stroke: 200 mm - throat: 0 mm - tonnage: 400 kN - the operating hours are also visible in the photo: showing 382 hours - bending length: 1030 mm - width between side frames: 1060 mm - working height: 885 mm - lower beam width: 120 mm - Y-approach speed: 250 mm/s - Y-working speed: 25 mm/s - Y-return speed: 250 mm/s - main motor power: 7,5 kW - oil capacity, approx.: 100 litre Backgauge - type: P14HA3-HA6 X-axis - X-axis travel: 300 mm - max. backgauge range X-axis: 500 mm - X-axis accuracy: 0,02 mm - X-axis speed: 1500 mm/s R-axis - R-axis travel: 100 mm - R-axis accuracy: 0,1 mm - R-axis speed: 500 mm/s Z1-, Z2-axis - Z-axis travel, approx.: 955 mm - Z-axis accuracy: 0,1 mm Giedpfoy Hf E Eex Anxot - Z-axis speed: 2000 mm/s X1-axis - X1-axis travel: 0 mm - X1-axis accuracy: 0 mm - X1-axis speed: 0 mm/s General dimensions - length: 1520 mm - width: 1584 mm - height: 2449 mm - side frame under-floor: 0 mm - lower beam under-floor: 0 mm - weight, approx.: 4 t

Condition: used, Year of construction: 2011, machine/vehicle number: B0702A0651, functionality: fully functional, operating hours: 30,858 h, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, pressing force: 36 t, operating speed: 220 mm/s, table length: 1,000 mm, overall weight: 2,600 kg, year of last overhaul: 2011, Equipment: CE marking, safety light barrier, The equipment has been fully maintained and is ready for immediate operation. The equipment has been in operation for 30,858 hours, and there are no operational issues (line laser not working). If you wish to use the line laser, it can be repaired for an additional fee. The cost is approximately 600 EUR. - Press beam OK - Block laser OK - Illumination (auto) OK - Line laser Not OK Gjdsyytuhjpfx Anxsit I would prefer the buyer to be familiar with the TruBend7036. If purchased in South Korea, I can provide free operator training.

Condition: like new (used), Year of construction: 2008, machine/vehicle number: B0502A0308, functionality: fully functional, operating hours: 1,520 h, pressing force: 85 t, overall weight: 7,800 kg, controller manufacturer: KEBA, controller model: TASC 6000, control type: CNC control, Equipment: CE marking, documentation/manual, For sale: used TRUMPF TruBend 5085X press brake, year of manufacture 2008. The machine is in exceptional technical condition – LIKE NEW! In January 2026, TRUMPF Poland service replaced all filters and oil, performed calibration, checked operational accuracy, and conducted safety tests. The machine has a low number of operating hours – only 1512 hydraulic hours! Hydraulics: Hoerbiger Gijdpfx Anjy Hpnqjxjt Year of manufacture: 2008 Maximum press force: 850 kN Working length: 2210 mm Power: 17 kW Voltage: 400 V Hydraulic oil tank capacity: 120 l Hydraulic system pressure: 300 bar Weight: 7800 kg Tool type: hydraulic Wila / Trumpf Control: TASC 6000 Increased installation height 5-axis backgauge – X, X5, R, Z1, Z2 Hydraulic upper tool clamping WILA Hydraulic lower tool clamping WILA CNC crowning BendGuard Prepared for ACB If you have any questions or need additional information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2021, Bending length: 4100 mm Press force: 240 tons Equipped with a comprehensive set of bending tools Manufacturer: Baykal Model: APHS 41240 Gisdpfoymldgox Anxst Power supply: three-phase Year of manufacture: 2021 Serial number: 28635

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C9100369, functionality: fully functional, operating hours: 5 h, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,800 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: NC control, degree of automation: semi-automatic, number of axes: 3, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Giedjy A Ni Hopfx Anxst Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS Back stop: 2 axis controlled X-R axes Bending tool holder: Type AMADA Promecam / A / R1 Bending tool holder: 4x manual quick-release adapters Light work area front and rear 1x set of bending tools included 36 month guarantee after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C9100368, functionality: fully functional, operating hours: 10 h, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,800 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: NC control, degree of automation: semi-automatic, number of axes: 3, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 Gedpfx Aoy A Niyonxoit CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS Back stop: 5 axis controlled X-R-Z1-Z2-Dx axes Bending tool holder: Type AMADA Promecam / A / R1 Bending tool holder: 4x manual quick-release adapters Front foldable support table Light work area front and rear 1x set of bending tools included 36 month guarantee after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: new, Year of construction: 2026, machine/vehicle number: TO5_2, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, overall weight: 375 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 350 mm, bending force (max.): 5 t, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 2, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam Gedey A Nimjpfx Anxoit 1 set of bending tools included 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!