Used Mawera Heating for sale (15,345)

Condition: excellent (used), Year of construction: 2001, operating hours: 123 h, functionality: fully functional, power: 350 kW (475.87 HP), Type: Mawera FU350RIA, fully automatic wood chip heating system with underfeed firing system. Output: 350 kW. Domestic hot water system with a maximum supply temperature of 95 °C. Year of manufacture: 2001. Components: Boiler (combustion chamber and heat exchanger), automatic feed auger, ash separator, flue pipes, flue gas fan, documentation, LOGIC control system, electrical control cabinet. Inspection possible in Upper Austria after prior appointment, in disassembled condition. Already disassembled, ready for immediate loading. Dwsdpfx Aezwuxgep Djc

Condition: used, functionality: fully functional, Due to an upgrade, we have a control unit for a MAWERA heating system available. The touch panel was replaced 2 years ago. The control unit is in perfect working order. Dodpfx Apsz Iky Es Dewc Price: 400 EUR * 19% VAT

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest. Dwodpfowa Ax Asx Ap Dsc

Condition: used, For sale: MAWERA 470 kW Biomass Boiler – Robust Industrial Woodchip Heating System The MAWERA biomass boiler with a nominal heat output of 470 kW is ideally suited for industrial and agricultural heating applications with a consistently high heat demand. Austrian quality, durable construction, and efficient heat transfer are hallmarks of this boiler. --- Technical Specifications: • Fuel types: Woodchips, sawdust, planing shavings • Nominal heat output: 470 kW • Combustion system:   ◦ Feed auger for fuel transport   ◦ Combustion chamber with heat-resistant fireclay lining • Control & air supply:   ◦ Primary and secondary air controlled via motorized dampers and blowers   ◦ Temperature-based control featuring flue gas and combustion chamber sensors • Boiler design:   ◦ Water-bearing boiler with generously sized heat exchanger surface   ◦ Front and rear firebox doors for easy access and maintenance --- Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) TOP HEATING SYSTEMS – Used heating equipment, boilers, heat pumps & accessories direct from stock We are a family-run business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a constantly available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Woodchip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps Dwjdpfxomuzq Eo Ap Djc • Thermo ventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Conveyor augers • Automatic fuel extraction systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and components: We also stock a wide selection of accessories, including circulation pumps, plate heat exchangers, and many other components—from domestic to industrial specifications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment not yet listed online. 📅 Inspection: Viewing is available by appointment at our warehouse. If interested, please contact us—we are happy to assist you in finding the right solution.

Condition: used, Year of construction: 1994, nominal heat output: 600 kW (815.77 HP), temperature: 95 °C, Equipment: hot water, For sale: Mawera Type FU600RA wood-fired boiler, manufactured in 1994. Accessories included: all fans, flue gas cyclone, exhaust pipes, control system, and feed motor with a short screw conveyor. The fireclay lining has been renovated by a specialist company. The boiler has been dismantled and is available immediately. Dedez Eg Srepfx Ap Dowc The boiler can be operated with wood chips and pellets.

Condition: good (used), Year of construction: 2000, power: 200 kW (271.92 HP), Heat exchanger from hot water to air, ideal for drying. Size approx. 3 m x 1.5 m. Estimated thermal output 200 - 300 kW, possibly more. One fan is missing. Dwodpfoy D E Rpox Ap Dsc

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Djdpfoz D Ihfox Ap Dewc

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Dedpfxoz Iww Re Ap Djwc Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: excellent (used), functionality: fully functional, 1. Mawera PS silo discharge system, in very good condition. 2. Weiss silo discharge system with chain. Year of manufacture: 1989, very robust design. Already dismantled. Arm length: 3 m. Motor: 5 kW. 3. Mawera SST hydraulic silo discharge system with 2 push rods, length: 14.5 m / piece. With hydraulic cylinders, unit, documentation, etc. The Mawera SST two-beam, hydraulically operated discharge system is used for the uniform and continuous discharge of wood chips from a rectangular silo. The slides or shovels move the material in alternating strokes to feed the boiler. Silo length: • Design with 12 slides: 14.50 m Internal width of the silo: 4.24 m Dwedpfx Aezv Eiasp Dec Shovel blade width: 900 mm, shovel depth: 250 mm, shovel height: 70 mm 4. Mawera RSS spring arm silo discharge system: Design: Rotating silo discharge system with spring arms. Application area: Discharge of wood chips, wood shavings, sawdust, and biomass fuels. The rotating arms located on the silo floor convey the fuel to the central discharge point. Outlet: Central discharge opening / transition to a further conveying system.

Condition: used, Year of construction: 1997, functionality: fully functional, power: 1,000 kW (1,359.62 HP), Boiler with feed system - Year of release: 1997 Dedpfx Ajv D Uz Eop Dewc - manufacturer: Komforts - Power 1 mW. - moving floor supply system with hydraulic station, - chimney, - pumps, - control, - hot water accumulator.

Condition: ready for operation (used), Year of construction: 1994, Mawera RZM 200 Main motor: 22 kW with electronic soft start Automatic idling shutdown Hydraulics: 1.0/1.4 kW, reversible Hopper opening: 844 x 1000 mm All-steel pipe: 270 mm Ø Rotor speed: 135 rpm Chopping teeth: 30 pieces, replaceable Chopping capacity: 500-850 kg/h Extraction: 30-35 m/s Weight: 2100 kg (without control cabinet) Control cabinet: with PLC microprocessor control Dodpfx Aoy T Ih Nop Dewc 30 pieces, replaceable 500-850 kg/h with PLC microprocessor control Operating hours: only 2562 Difference between RMO and RZM: The RMO is an older model, a classic found on the used market. The RZM 200 is its modern evolution – more robustly built, intelligently controlled, easier to maintain, and more efficient when processing modern wood waste and pallets.

Condition: excellent (used), Year of construction: 1994, Low-speed machine with hydraulic moving floor. Rotor width: 840 mm. Motor: 18.5 kW. Hopper with lid included. Ready for operation. Only 3400 operating hours. Dwjdpfxex Ilp He Ap Dsc

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 Dwjdpfez Hngmex Ap Dsc • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: excellent (used), Catalog number 7374 TECHNICAL DATA - Dimensions of the loading hopper at the top (length/width): 840x620mm - Dimensions of the loading hopper at the bottom (length/width): 300x300mm - Rotor width: 340mm - Engine: 22kW - Screen size: 15mm - Number of knives: 6 pcs - Outlet for shredded wood: diameter 160mm - Dimensions (length/width/height): 1400x800x2000mm - Weight: 840kg ADVANTAGES – German made – Very good condition – Used wood chipper Dwedpezwwx Asfx Ap Dec Net price: 23900 PLN Net price: 5558 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 1995, A robust Mawera wood shredder including feed floor is offered. Throughput capacity: approx. 500kg/h, feed width: 844mm, drive power: 22kW, number of blades: 30, blade diameter: 64mm, motor speed: 1480rpm, control system: PLC, weight: approx. 2100kg, dimensions: approx. 2020mm/1650mm/1250mm. Inspection by appointment possible. Dwjdpfxezmymbs Ap Dsc

Condition: used, Year of construction: 2006, functionality: fully functional, power: 37 kW (50.31 HP), filter area: 169 m², total height: 5,950 mm, total length: 4,650 mm, total width: 2,250 mm, For sale is a complete industrial Aagaard/Finnrose dust extraction and filtration system, manufactured in 2006, from a wood processing facility. The system is designed as a screw filter and includes a complete dust extraction control system with heat recovery. The main fan is an Aagaard AVD 40 HF/240 with 37 kW. The filter system has approximately 169 m² of filter area with a total of 128 filter elements, each approximately 2,000 mm long and Ø 210 mm. The discharge is carried out via a discharge screw and a rotary valve airlock. Below the discharge is a matching hopper with approximately 6 m³ volume on a mobile trolley, which is included in the scope of supply. The complete control cabinet for the dust extraction control and heat recovery is part of the system. The control cabinet includes, among other things, the controls for the rotary valve airlock, discharge screw, and four cleaning groups, as well as a Schneider-Electric frequency inverter for the dust extraction fan. Technical data: Aagaard / Finnrose industrial dust extraction system / screw filter Year of manufacture: 2006 Main fan: Aagaard AVD 40 HF/240 Motor power main fan: 37 kW Filter area: approx. 169 m² Filter elements: 128 pieces Dimensions filter elements: approx. Length 2,000 mm / Ø 210 mm Electrical system: 3 × 400/230 V, 50 Hz Rated current control cabinet: 160 A Discharge via discharge screw and rotary valve airlock 4 cleaning groups Complete control cabinet for dust extraction control and heat recovery Dwodpfx Aez Ik Atjp Dsc Frequency inverter for main fan Heat recovery / return air system available 6-m³ hopper on mobile trolley included Existing steel substructure can be taken over Extensive existing piping can be included by agreement Dimensions: Filter tower incl. rotary valve airlock: approx. 5,950 × 2,280 × 4,632 mm (L × W × H), height from steel substructure. Steel substructure: approx. 5,500 × 2,800 × 2,250 mm (L × W × H from the ground). Total height of filter tower incl. substructure: approx. 6,882 mm. Availability / Dismantling: Sale possible immediately. The system is located at CH-3608 Thun, Switzerland. The complete dismantling and removal must be completed no later than July 31, 2027. Dismantling, loading, transport, and any customs clearance will be carried out entirely by the buyer at his own cost and responsibility. All necessary skilled personnel, lifting equipment, cranes, and transport means must be organized by the buyer. Inspection possible by appointment. Sale from location in the existing condition. Technical specifications provided to the best of our knowledge, without guarantee; inspection by the buyer before purchase is recommended. Selling price: 29,500 EUR Price net, any statutory taxes and duties are additional. Export, customs clearance, and import duties are the responsibility of the buyer.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: A-6.3240, Complete 2019 Wienstroth Fixture Heat Treat/Quenching Line. Furnace Temperature Max 880 Deg C, 480kW, Heating Zones: 4, Power Supply Voltage: 460/60 Volts/Hz. Refer to attachments for further equipment specs & drawings. Line to include: High Temperature Furnace w/ Material Conveyers Overhead Crane & Hoist System Quenching Bath w/ Heat Exchanger, Pumps and PLC Washing/Rinsing Station, 2 Zone, TPS & Entrance Conveyer Assembly Transfer Conveyer System, Material Handling Assembly w/ Tracks Low Temperature Temper Furnace w/ Cooling Conveyer & PLC Quenching Line PLC Controller Dodpfx Apoz Hb S Aj Dswc Power Distribution Cabinets, Rittal/Wienstroth 24x Pallets Quenching Line Tooling

Year of construction: 2020, condition: used, Manufacturer: KAPP Model: KF3-1500-1 Year: 2020 Type: shell-and-tube heat exchanger / tubular heat exchanger Condition: new (declassified) – never put into production. Material: 316L stainless steel Heat transfer surface area: 2 m² Original working fluid: steam, Group 2 (tube) / 70 per cent glycol, Group 2 (shell) Operating pressure: -1/8 bar (tube) / -1/6 bar (shell) Operating temperature: 180 °C (tube) / 150 °C (shell) Test pressure: 17.6 bar (tube) / 16.3 bar (shell) Volume: 7 L (tube) / 10 L (shell) A bundle of around thirty tubes, flanged tube sheet Heat exchanger with expansion joint (bellows) Flanged connections on the heat exchanger side (inlet and outlet) Dwjdpfjz Iubtox Ap Dec 2 stainless steel mounting brackets Unladen weight: approximately 50 kg

Year of construction: 2014, condition: like new (used), Heating tunnel for drying footwear. Dedsz Hw D Ujpfx Ap Djwc

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Rotor width = working width 98 cm Djdpfxot Tvk As Ap Dowc 22 kw motor with discharge auger

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Djdpfx Apjzi Hcho Dewc Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 1 Guides: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Guides: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: excellent (used), CATALOGUE NUMBER 7191 TECHNICAL DATA - inlet of the loading hopper: 870x735mm - working width of the rotor: 720mm - main motor: 18.5kW - pump motor: approximately 0.75kW - number of blades: 17 pcs - blade dimensions: 80x40mm - screen size: 20mm - pressure plate/feed hopper - electric automatic reversing - outlet for shredded wood: diameter 250mm - dimensions (length/width/height): 2000x1350x1370mm - weight: 1586kg ADVANTAGES – pressure plate/feed hopper – very good condition – used wood chipper Net price: 33,900 PLN Net price: 7,884 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations) Dwsdpfx Apezru Uqs Djc

Condition: like new (used), Year of construction: 2019, Hot air generator with 2 outlets and 1 flue outlet, designed for use with wood waste, suitable for heating an area of 500 square meters. Dedpfx Asz D I Iljp Dowc

Condition: excellent (used), Used, electrically heated stainless steel tank / transport container Last use: Chemicals Item number: 10907 Volume: 1000 L Type: Upright, mounted on a stainless steel frame Dwjdpfxoz Ixgyo Ap Djc Material (in contact with medium): 1.4301 / AISI304 Design: With electric heating Bottom: Curved Top: Curved Operating pressure according to nameplate: 0.30 bar Tank dimensions: Overall width: 1200 mm Overall length: 1200 mm Overall height: 1675 mm Distance from outlet to bottom: 240 mm Materials: Inside: 1.4301 / AISI 304 Frame: Stainless steel Features: Nameplate: Yes Outlet valve: Disc valve Outlet diameter: DN50 Electric heating Empty weight: 433 kg

Condition: used, Used, electrically heated stainless steel tank / transport container Dwodpfx Aez Ixg Hsp Dec Last application: Chemicals Article number: 10908 Volume: 1000 L Type: Standing, in a stainless steel frame Material (in contact with media): 1.4301 / AISI304 Design: With electric heating Bottom: Arched Top: Arched Operating pressure according to nameplate: 0.30 bar Tank dimensions: Overall width: 1200 mm Overall length: 1200 mm Overall height: 1675 mm Distance from outlet to bottom: 200 mm Manhole: 400 mm Materials: Inside: 1.4301 / AISI 304 Frame: Stainless steel Equipment: Nameplate: Yes Outlet type: Disc valve Outlet diameter: DN50 Electric heating Empty weight: 325 kg