Used Microtec Goldeney 502 for sale (606)

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: dd2d22d, ELECTRONIC CONTROL SYSTEM FOR X-RAY CUTTING LINE Wood type: Pine, Spruce Scanner functionality Acquisition of measurement signals from the multi-sensor scanner. Processing (D) of the 3D map from the laser triangulation signal. Processing (S) of the fiber deviation map from the laser scatter signal. Processing (R) of the roughness map from the laser triangulation signal. Ksdsxvxrnspfx Afpelt Processing (C) of the normalized color map from the high-resolution RGB signal. Integration of 3D data, fiber deviation, roughness profile, and color map information into a coherent multidimensional image.

Condition: used, Year of construction: 1994, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm Ksdpjyrhyuofx Afpelt daylight 350 mm table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3, up to Ø 32.5 mm Quick-change device for punches 2 and 5 up to Ø 31.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016. Kodoy Dtpmopfx Afpjlt

Condition: used, Year of construction: 2007, Delivery Kjdjy Iv Nqspfx Afpslt Palamides Delta 502 Year: 2007 - Vertical stacker - bundler - Banding device(s): 2 Voltage 220 volts

Condition: used, Year of construction: 2021, functionality: fully functional, STC-Ref:G-571-0053 Palamides Gamma 502-HO, Year: 2021 format: 510 x 240 mm equipped: - Dual-purpose cutting device - delivery with banding Klsdpsy R A Eqefx Afpot - pile height max. 12 cm - pile height min. 2 cm - speed 600 pck/hr per nutzen max. - paper size max. 51 x 24 cm - paper size min. 10,5 x 9,5 cm

Condition: used, Year of construction: 2012, Air Cushion Machine Fromm Airpad Machine Manufacturer: Brüninghaus Model: AP 502 Year of manufacture: approx. 2012 Film material: PA/PE composite film or polyethylene film (100% recyclable) Compressed air connection: NW 10/4 - 8 bar; max. 82 Nl/min (during cushion production): max. 3.5 Nl/cycle Performance: 25 – 49 cycles/min. (depending on film type and cushion size) Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Kodpfx Afswulylspelt Dimensions (LxWxH): 1,600 x 767 x 1,292 mm Weight: 230 kg Accessories / Special equipment: • Stored programs for various cushion sizes • Program change with the push of a button • Can produce customized lengths from 4 cm to 16 cm with defined filling levels • 10 programs available to store several parameters 12526ä

Year of construction: 2014, condition: good (used), High-quality air pad machine from a renowned manufacturer. Suitable for producing individually defined air-filled protective and filling elements made of PA and PE film as well as air cushions made of paper. Klsdpfx Askkcqqofpet Four air cushions are usually produced per work cycle. Various formats can be produced. 10 programs are available for storing several parameters. By calling up the corresponding program on the display, air cushions from 4 cm to 16 cm in length and with an individually defined degree of filling can be produced. The air cushion webs created in this way are wound into rolls using a motorized device. When the roll is full, the machine switches off automatically. The finished roll can then be removed manually and subsequently used as packaging material. The machine can be pushed using rollers and secured using brakes. The machine can be demonstrated with power.

Condition: used, The Horizon AFC-502 folding machine, serial number 23027, is a versatile solution for professional folding applications. Currently dismantled and located in Germany, it is designed to handle a wide range of formats with precision and efficiency. Klsdpfxsw U Dtve Afpet This model offers 2 parallel folds and 1 cross fold, supported by a suction head with rotary feeder for smooth and reliable sheet handling. It accommodates sheet widths up to 500 mm (minimum 105 mm) and lengths up to 648 mm (minimum 174 mm). Cross folding is possible from 182 mm to 500 mm, while perforation can be performed on sheets ranging from 105 mm to 500 mm in width. Performance highlights: Folding capacity: 2 parallel folds + 1 cross fold Sheet width: 105 ??? 500 mm Sheet length: 174 ??? 648 mm Cross folding: 182 ??? 500 mm Perforation width: 105 ??? 500 mm Speed: up to 180 m/min Compact and efficient, the Horizon AFC-502 is well-suited for printshops requiring reliable folding performance across a variety of formats. Format: 500 mm Equipment: 2 parallel fold 1 cross fold Sheet width: max: 500mm,min: 105mm, Cross folding: max: 500mm, min: 182mm, Perforation: max: 500mm, min: 105mm, sheet length: max. 648mm, min.174mm. Speed max. 180 m/min., suction head w ith a rotary feeder

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame Ksdpfjyyz Ebox Afpolt - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Ksdpfx Aeyyzxhofpolt Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: good (used), Position sensor, valve actuator, valve drive, actuator, servo motor -Type: T 100 a 502 Kedjb Uhr Uepfx Afpjlt -Weight: 0.3 kg

Condition: used, Year of construction: 2000, Max. sheet thickness: 2 mm steel Max. round diameter: 1000 mm Motor drive via footswitch Kedowb Efzspfx Afpolt Good condition

Condition: used, mileage: 5,02,263 km, power: 155 kW (210.74 HP), first registration: 05/2014, fuel type: diesel, tire size: 265 / 70 / R19.5, axle configuration: 4x2, wheelbase: 4,800 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 9,150 mm, total width: 2,550 mm, total height: 3,800 mm, permissible axle load (axle 1): 5,000 kg, permissible axle load (axle 2): 9,440 kg, loading space length: 7,200 mm, loading space width: 2,460 mm, loading space height: 2,560 mm, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, power mirror, soot filter, spoiler, tail-lift, Technical information Number of cylinders: 4 Engine capacity: 4.500 cc Transmission Transmission: ZF, 6 gears, Automatic Axle configuration Tyre size: 265 / 70 / R19.5 Make axles: DAF Brakes: disc brakes Front axle: Max. axle load: 5000 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Max. axle load: 9440 kg; Tyre profile left inner: 25%; Tyre profile left outer: 25%; Tyre profile right outer: 25%; Tyre profile right outer: 25%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.065 kg Carrying capacity: 4.934 kg GVW: 11.999 kg Functional Tail lift: Dhollandia DHSM.20, slider lift, 1500 kg Make of bodywork: van Bekkum Curtainside / Schuifzeil / Pritsch - Plane Interior Interior: grey Condition General condition: average Technical condition: moderate Visual appearance: average Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL Klodpfx Aey H Aqfofpot = Additional options and accessories = - 12 volt socket - Armrest - Baggage cover - Car kit - Heavy duty engine brake - Low-noise - Particulate filter - Radio/CD player - Remote central locking - Speed limiter - Spoilers - Stability control - Toolbox - Visor

Condition: good (used), Year of construction: 1993, Omga Pneumatic Corner Frame Assembly Machine Model: Joint 502 Klsdpsyy S Uaefx Afpot For assembling popular types of frames. During the stapling process, the machine operator has a clear view of the frames and can, if necessary, make required positional adjustments. The two frame components are placed into the stop and locked in position by a pneumatically actuated clamp equipped with a special rubber pad to prevent damage to delicate frames. The stop is adjustable, allowing for the insertion of two staples at the desired distance. The Joint 502 allows for two different staples, even of different sizes, to be inserted at the required axial spacing, with the two staple units positioned accordingly. Location: Available from stock, 54634 Bitburg - available immediately -

Condition: good (used), 🧰 Product Features • Model: TP-502 MV • Condition: used • Segment: Performance • Material: Plastic, Steel • Color: red, white • Suitable for material: PP strapping • Battery module: 2x 12 V batteries with 120 Ah • Battery charge: lasts up to 4 hours in continuous operation • Strap tension: 8 – 70 kg • Strap width: 9-12 mm • Strap thickness: 0.6 – 0.75 mm • Height: 1074 mm Klsdpfx Afow Dz Ukepot • Width: 585 mm • Depth: 2315 mm • Core diameter: 200 mm • Net weight: 174 kg (incl. 120 Ah battery) • Strapping machine type: semi- and fully automatic • Sealing mechanism: welding • Straps per minute: approx. 6 • Enables mobile strapping independent of power supply 💰 Price €3,470 net, excl. VAT. • Volume discount: on request • Shipping costs: Europe-wide on request • Delivery time: Available for immediate delivery • Inspection and collection: possible at any time by appointment Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock. (Subject to change and errors in technical data, information and prices, as well as prior sale! See our T&Cs, all prices excl. VAT ex stock.)

Condition: like new (used), Screw Jack GROB RTP 502-000-8 Kedsyrydljpfx Afpolt Screw Jack RTP 502-000-8 GROB 40:23 240/01 00000 Manufacturer: GROB Antriebstechnik Type: RTP 502-000-8 Design: screw jack / lifting gear Item number: 213554 Drawing number: 90010016737 Packaging: original wooden crate Condition: unused, original packaging from warehouse clearance

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 502 S Alüminyum Pvc 3'lü kol yeri delme su tahliye makinesi yüksek frekans motorlu, - Complies with CE standards. - Possibility of opening locking places, hinge slots, handle holes and water drainage channels of aluminum and PVC profiles. - Vertical axis operation of the copy head - Horizontal axis operation of the triple drilling system - Ability of the water drainage system to operate in angled position - Possibility to make universal template optional template Kledpfx Aoramz Hefpot - Possibility of triple drilling copy milling cutter or grooving system working as one - High frequency motor (18000 rpm) - Right conveyor system (1 meter)

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 942.991-C-1058233, power: 450 kW (611.83 HP), fuel type: diesel, The engine has never been used. The unit adheres to Euro 4-5 emission standards. Kljdpfx Afswhkrmepot Discounts may be applied in case of multiple unit purchases. Please contact for your other Mercedes-Benz engine for heavy vehicle and crane inquiries with varying powers and emission standards.

Condition: used, Year of construction: 2000, Horizon AFC-504 AKT Automatic Combination Folder, Used The Horizon AFC-504 AKT is a proven and robust automatic combination folder, specially designed for efficient processing of brochures, inserts, and other folding jobs. Key Features: - Sturdy construction for reliable and long-lasting performance Kjdpfx Afsw Eu Rbepjlt - Flexibility to handle various folding types and paper formats - Easy operation for quick setup times - Suitable for medium to large production volumes Technical Specifications: - Max. sheet size: 490 x 650 mm - Min. sheet size: 120 x 172 mm - Paper weight: 40 to 250 g/m² - Stack height: up to 650 mm - Production speed: up to 27,000 cycles/hour - Power supply: 400 V, 50 Hz, 2.5 kW - Dimensions (L x W x H): 2,540 x 1,790 x 1,440 mm - Weight: approx. 870 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), Year of construction: 2006, Palamides Delta 502 banding delivery for folding machines Klsdpfx Aoxvygyefpjt year 2006 in good condition

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges Klodpfob A Ta Nex Afpst -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Admission: -Tool: Ø 150 mm -Dimensions: 880/260/H300 mm -Weight: 18.5 kg

Condition: used, Multiple limit switches, buttons, limit switches Kodpfx Afsb A N Skepelt -250 V 10 A -Price: per piece -Number: 20x available -Weight: 1 kg

Condition: used, Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 400 mm -Length: 502 mm -Height: 120 mm Kjdpfx Afjchyxyepelt -Plate thickness: 28 mm -with: support ribs -Weight: 50 kg

Condition: used, Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate Klodpfsd N Dd Ajx Afpst -Plate is: scraped -Width: 502 mm -Length: 801 mm -Height: 930 mm -Plate thickness: 10 mm -Plate with: support ribs -Number: 1x plates available -Price: per piece -Transport dimensions: 801/502/H930 mm -Weight: 128 kg

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: mm -Dimensions: 190/70/H85 mm -Weight: 1.8 kg Kjdpfx Aob A Tcaofpslt